- 28 Aug, 2017 40 commits
-
-
Federico Vaga authored
Signed-off-by:
Federico Vaga <federico.vaga@cern.ch> Tested-by:
Pat Riehecky <riehecky@fnal.gov> Acked-by:
Alessandro Rubini <rubini@gnudd.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
There is a mistake here where we accidentally use sizeof(TB_CFG_PKG_RESET) instead of just TB_CFG_PKG_RESET. The size of an int is 4 so it's the same as TB_CFG_PKG_NOTIFY_ACK. Fixes: d7f781bf ("thunderbolt: Rework control channel to be more reliable") Reported-by:
Colin King <colin.king@canonical.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Cc: stable <stable@vger.kernel.org> # 4.13 Signed-off-by:
-
Bernat, Yehezkel authored
If secure authentication of a devices fails, either because the device already has another key uploaded, or there is some other error sending challenge to the device, and the user only wants to approve the device just once (without a new key being uploaded to the device) the current implementation does not allow this because the key cannot be cleared once set even if we allow it to be changed. Make this scenario possible and allow clearing the key by writing empty string to the key sysfs file. Signed-off-by:
Yehezkel Bernat <yehezkel.bernat@intel.com> Acked-by:
-
Bernat, Yehezkel authored
Non-root user may read the key back after root wrote it there. This removes read access to everyone but root. Signed-off-by:
-
Bernat, Yehezkel authored
The key size is tested by hex2bin() already (as '\0' isn't an hex digit) Suggested-by:
Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by:
-
Arvind Yadav authored
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by:
-
Arvind Yadav authored
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by:
-
Arvind Yadav authored
amba_id are not supposed to change at runtime. All functions working with const amba_id. So mark the non-const structs as const. Signed-off-by:
-
Stephen Boyd authored
The casting and other things here is odd, and causes sparse to complain: drivers/hwtracing/coresight/coresight-stm.c:279:35: warning: incorrect type in argument 1 (different address spaces) drivers/hwtracing/coresight/coresight-stm.c:279:35: expected void [noderef] <asn:2>*addr drivers/hwtracing/coresight/coresight-stm.c:279:35: got struct stm_drvdata *drvdata drivers/hwtracing/coresight/coresight-stm.c:327:17: warning: incorrect type in argument 2 (different address spaces) drivers/hwtracing/coresight/coresight-stm.c:327:17: expected void volatile [noderef] <asn:2>*addr drivers/hwtracing/coresight/coresight-stm.c:327:17: got void *addr drivers/hwtracing/coresight/coresight-stm.c:330:17: warning: incorrect type in argument 2 (different address spaces) drivers/hwtracing/coresight/coresight-stm.c:330:17: expected void volatile [noderef] <asn:2>*addr drivers/hwtracing/coresight/coresight-stm.c:330:17: got void *addr drivers/hwtracing/coresight/coresight-stm.c:333:17: warning: incorrect type in argument 2 (different address spaces) drivers/hwtracing/coresight/coresight-stm.c:333:17: expected void volatile [noderef] <asn:2>*addr drivers/hwtracing/coresight/coresight-stm.c:333:17: got void *addr >From what I can tell, we don't really need to treat ch_addr as anything besides a pointer, and we can just do pointer math instead of ORing in the bits of the offset and achieve the same thing. Also, we were passing a drvdata pointer to the coresight_timeout() function, but we really wanted to pass the address of the register base. Luckily the base is the first member of the structure, so everything works out, but this is quite unsafe if we ever change the structure layout. Clean this all up so sparse stops complaining on this code. Reported-by:
Satyajit Desai <sadesai@codeaurora.org> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
Add the peripheral ids for the Coresight SoC 600 TPIU, replicator and funnel. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by:
-
Suzuki K Poulose authored
The coresight SoC 600 supports ETR save-restore which allows us to restore a trace session by retaining the RRP/RWP/STS.Full values when the TMC leaves the Disabled state. However, the TMC doesn't have a scatter-gather unit in built. Also, TMCs have different PIDs in different configurations (ETF, ETB & ETR), unlike the previous generation. While the DEVID exposes some of the features/changes in the TMC, it doesn't explicitly advertises the new save-restore feature as described above. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
The Coresight SoC 600 TMC ETR supports save-restore feature, where the values of the RRP/RWP and STS.Full are retained when it leaves the Disabled state. Hence, we must program the RRP/RWP and STS.Full to a proper value. For now, set the RRP/RWP to the base address of the buffer and clear the STS.Full register. This can be later exploited for proper save-restore of ETR trace contexts (e.g, perf). Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
If the ETR supports split cache encoding (i.e, separate bits for read and write transfers) unlike the older version (where read and write transfers use the same encoding in AXICTL[2-5]). This feature is not advertised and has to be described by the static mask associated with the device id. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
This patch cleans up how we setup the AXICTL register on TMC ETR. At the moment we don't set the CacheCtrl bits, which drives the arcache and awcache bits on AXI bus specifying the cacheablitiy. Set this to Write-back Read and Write-allocate. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
TMC in Coresight SoC-600 advertises the AXI address width in the device configuration register. Bit 16 - AXIAW_VALID 0 - AXI Address Width not valid 1 - Valid AXI Address width in Bits[23-17] Bits [23-17] - AXIAW. If AXIAW_VALID = b01 then 0x20 - 32bit AXI address bus 0x28 - 40bit AXI address bus 0x2c - 44bit AXI address bus 0x30 - 48bit AXI address bus 0x34 - 52bit AXI address bus Use the address bits from the device configuration register, if available. Otherwise, default to 40bit. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Robin Murphy <robin.murphy@arm.com> Signed-off-by:
-
Suzuki K Poulose authored
The SG unit in the TMC has been removed in Coresight SoC-600. This is however advertised by DEVID:Bit 24 = 0b1. On the previous generation, the bit is RES0, hence we can rely on the DEVID to detect the support. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
With new version of TMC ETR, there are differing set of features supported by the TMC. Add the capability of a given TMC ETR for making safer decisions at runtime. The device configuration register of the TMC (DEVID) lists some of the capabilities. So, we can detect some of them at probe. However, some of the features (or changes in behavior) are not advertised and we have to depend on the PID to infer the features. So we use a static description of the "unadvertised" capabilities attached to the PID. Combining both, the static and the dynamic capabilities, we maintain a bitmask of the available features which can be later checked to take appropriate actions. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
Coresight SoC 600 defines a new configuration for TMC, Embedded Trace Streamer (ETS), indicated by 0x3 in MODE:CONFIG_TYPE. This would break the existing driver which will treat anything other than ETR/ETB as an ETF. Fix the driver to check the configuration type properly and also add a warning if we encounter an unsupported configuration (ETS). Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
Expose the idfilter* registers of the programmable replicator. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
Expose DBALO,DBAHI and AXICTL registers Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
Coresight TMC splits 64bit registers into a pair of 32bit registers (e.g DBA, RRP, RWP). Provide helpers to read/write to these registers. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
Use the new helpers for exposing coresight component registers, choosing the 64bit variants for appropriate registers. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
Add support for reading a lower and upper 32bits of a register as a single 64bit register. Also add simplified macros for direct register accesses. Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Suzuki K Poulose authored
The Linux coresight drivers define the programmable ATB replicator as Qualcomm replicator, while this is designed by ARM. This can cause confusion to a user selecting the driver. Cleanup all references to make it explicitly clear. This patch : 1) Replace the compatible string for the replicator : qcom,coresight-replicator1x => arm,coresight-dynamic-replicator 2) Changes the Kconfig symbol (since this is not part of any defconfigs) CORESIGHT_QCOM_REPLICATOR => CORESIGHT_DYNAMIC_REPLICATOR 3) Improves the help message in the Kconfig. 4) Changes the name of the driver and the file : coresight-replicator-qcom => coresight-dynamic-replicator Cc: Pratik Patel <pratikp@codeaurora.org> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: devicetree@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Acked-by:Rob Herring <robh+dt@kernel.org> Signed-off-by:
-
Mike Leach authored
Adds handling to program the return stack option into ETMv4 hardware if specified in the perf command line. If option is not supported by the hardware then it will be ignored. This allows capture to move between core/ETM combinations that have the hardware support to those that do not. Signed-off-by:
Mike Leach <mike.leach@linaro.org> Signed-off-by:
-
Mike Leach authored
Adds handling to program the return stack option into PTM hardware if specified in the perf command line. If option is not supported by the hardware then it will be ignored. This allows capture to move between core/ETM combinations that have the hardware support to those that do not. Signed-off-by:
-
Mike Leach authored
Return stack is a programmable option on some ETM and PTM hardware. Adds the option flags to enable this from the perf event command line. Signed-off-by:
-
Arvind Yadav authored
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/sysfs.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 2573 288 296 3157 c55 coresight-etm-perf.o File size After adding 'const': text data bss dec hex filename 2613 224 296 3133 c3d coresight-etm-perf.o Signed-off-by:
-
Mathieu Poirier authored
Register ETMSYNCFR holds the number of by that need to be generated before periodic synchronisation packets are inserted in the trace stream. By zeroing out the config structure, the current code effectively disable periodic synchronization. This patch simply initialise the recommended value for this register as specified in the technical reference manual. Signed-off-by:
-
Mathieu Poirier authored
Function etb_disable_hw() is already taking care of unlocking and locking the coresight access register and as such doesn't need to be placed within the unlock/lock of function etb_update_buffer(). Signed-off-by:
-
Mathieu Poirier authored
When a buffer overflow happens the synchronisation patckets usually present at the beginning of the buffer are lost, a situation that prevents the decoder from knowing the context of the traces being decoded. This patch adds a barrier packet to be used by sink IPs when a buffer overflow condition is detected. These barrier packets are then used by the decoding library as markers to force re-synchronisation. Signed-off-by:
-
Mathieu Poirier authored
Internal CoreSight components are rendering trace data in little-endian format. As such there is no need to convert the data once more, hence removing the extra step. Signed-off-by:
-
Mathieu Poirier authored
Many conditions may cause synchronisation to be lost when updating the perf ring buffer but the end result is still the same: synchronisation is lost. As such there is no need to increment the lost count for each condition, just once will suffice. Signed-off-by:
-
Kiran Gunda authored
Check the irq ownership in the irq_request_resources callback instead of checking it during the irq mapping. This can prevent installing the flow handler for the interrupt that is not owned by the EE and allow the irq translation during the gpio driver probe. Signed-off-by:
Kiran Gunda <kgunda@codeaurora.org> Tested-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
