- 05 Nov, 2017 32 commits
-
-
Vivien Didelot authored
DSA trees have a refcount used to automatically free the dsa_switch_tree structure once there is no switch devices inside of it. The refcount is incremented when a switch is added to the tree, and decremented when it is removed from it. But because of kref_init, the refcount is also incremented at initialization, and when looking up the tree from the list for symmetry. Thus the current code stores the number of switches plus one, and makes the switch registration more complex. To simplify the switch registration function, we reset the refcount to zero after initialization and don't increment it when looking up a tree. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Similarly to a DSA switch and port, rename the tree index from "tree" to "index" and make it an unsigned int because it isn't supposed to be less than 0. u32 is an OF specific data used to retrieve the value and has no need to be propagated up to the tree index. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Define the DSA switch index as an unsigned int, because it will never be less than 0. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Intiyaz Basha authored
netdev->rx_dropped was including packets dropped by napi_gro_receive. If a packet is dropped by network stack, it should not be counted under driver Rx dropped. Made necessary changes to not include network stack drops under netdev->rx_dropped. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Quentin Monnet authored
The two functions were declared as static inline in a header file. There is no particular reason why they should be inlined, they just happened to remain in the same header file when they were turned from macros to functions in a precious commit. Make them non-inlined functions and move them to common.c file instead. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== bpf: add offload as a first class citizen This series is my stab at what was discussed at a recent IOvisor bi-weekly call. The idea is to make the device translator run at the program load time. This makes the offload more explicit to the user space. It also makes it easy for the device translator to insert information into the original verifier log. v2: - include linux/bug.h instead of asm/bug.h; - rebased on top of Craig's verifier fix (no changes, the last patch just removes more code now). I checked the set doesn't conflict with Jiri's, Josef's or Roman's patches, but missed Craig's fix :( v1: - rename the ifindex member on load; - improve commit messages; - split nfp patches more. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Thanks to the ability to load a program for a specific device, running verifier twice is no longer needed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Following steps are taken in the driver to offload an XDP program: XDP_SETUP_PROG: * prepare: - allocate program state; - run verifier (bpf_analyzer()); - run translation; * load: - stop old program if needed; - load program; - enable BPF if not enabled; * clean up: - free program image. With new infrastructure the flow will look like this: BPF_OFFLOAD_VERIFIER_PREP: - allocate program state; BPF_OFFLOAD_TRANSLATE: - run translation; XDP_SETUP_PROG: - stop old program if needed; - load program; - enable BPF if not enabled; BPF_OFFLOAD_DESTROY: - free program image. Take advantage of the new infrastructure. Allocation of driver metadata has to be moved from jit.c to offload.c since it's now done at a different stage. Since there is no separate driver private data for verification step, move temporary nfp_meta pointer into nfp_prog. We will now use user space context offsets. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
struct nfp_prog is currently only used internally by the translator. This means there is a lot of parameter passing going on, between the translator and different stages of offload. Simplify things by allocating nfp_prog in offload.c already. We will now use kmalloc() to allocate the program area and only DMA map it for the time of loading (instead of allocating DMA coherent memory upfront). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Most of offload/translation prepare logic will be moved to offload.c. To help git generate more reasonable diffs move nfp_prog_prepare() and nfp_prog_free() functions there as a first step. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Firmware supports live replacement of programs for quite some time now. Remove the software-fallback related logic and depend on the FW for program replace. Seamless reload will become a requirement if maps are present, anyway. Load and start stages have to be split now, since replace only needs a load, start has already been done on add. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
We currently create a fake cls_bpf offload object when we want to offload XDP. Simplify and clarify the code by moving the TC/XDP specific logic out of common offload code. This is easy now that we don't support legacy TC actions. We only need the bpf program and state of the skip_sw flag. Temporarily set @code to NULL in nfp_net_bpf_offload(), compilers seem to have trouble recognizing it's always initialized. Next patches will eliminate that variable. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
BPF offload's main header does not need to include nfp_net.h. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
The register renumbering was removed and will not be coming back in its old, naive form, given that it would be fundamentally incompatible with calling functions. Remove the leftovers. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Only support BPF_PROG_TYPE_SCHED_CLS programs in direct action mode. This simplifies preparing the offload since there will now be only one mode of operation for that type of program. We need to know the attachment mode type of cls_bpf programs, because exit codes are interpreted differently for legacy vs DA mode. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
If TC program is loaded with skip_sw flag, we should allow the device-specific programs to be accepted. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Pass the netdev pointer to bpf_prog_get_type(). This way BPF code can decide whether the device matches what the code was loaded/translated for. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
If program is bound to a device, print the name of the relevant interface or unknown if the netdev has since been removed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Extend struct bpf_prog_info to contain information about program being bound to a device. Since the netdev may get destroyed while program still exists we need a flag to indicate the program is loaded for a device, even if the device is gone. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
The fact that we don't know which device the program is going to be used on is quite limiting in current eBPF infrastructure. We have to reverse or limit the changes which kernel makes to the loaded bytecode if we want it to be offloaded to a networking device. We also have to invent new APIs for debugging and troubleshooting support. Make it possible to load programs for a specific netdev. This helps us to bring the debug information closer to the core eBPF infrastructure (e.g. we will be able to reuse the verifer log in device JIT). It allows device JITs to perform translation on the original bytecode. __bpf_prog_get() when called to get a reference for an attachment point will now refuse to give it if program has a device assigned. Following patches will add a version of that function which passes the expected netdev in. @type argument in __bpf_prog_get() is renamed to attach_type to make it clearer that it's only set on attachment. All calls to ndo_bpf are protected by rtnl, only verifier callbacks are not. We need a wait queue to make sure netdev doesn't get destroyed while verifier is still running and calling its driver. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
ndo_xdp is a control path callback for setting up XDP in the driver. We can reuse it for other forms of communication between the eBPF stack and the drivers. Rename the callback and associated structures and definitions. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
Make use of the swap macro and remove unnecessary variables skb and cnt. This makes the code easier to read and maintain. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Gustavo A. R. Silva authored
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 114893 Addresses-Coverity-ID: 114894 Addresses-Coverity-ID: 114895 Addresses-Coverity-ID: 114896 Addresses-Coverity-ID: 114897 Addresses-Coverity-ID: 114898 Addresses-Coverity-ID: 114899 Addresses-Coverity-ID: 114900 Addresses-Coverity-ID: 114901 Addresses-Coverity-ID: 114902 Addresses-Coverity-ID: 114903 Addresses-Coverity-ID: 114904 Addresses-Coverity-ID: 114905 Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
tcp_init_nondata_skb() is fed with freshly allocated skbs. They already have a cleared csum field, no need to clear it again. This is based on Neal review on commit 3b117750 ("tcp: do not mangle skb->cb[] in tcp_make_synack()"), noticing I did not clear skb->csum. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Reduce one indentation level to make code more readable. tcp_sync_mss() can be factorized. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
We can now build this driver on ARM, so I ran into a randconfig build warning that presumably had existed on powerpc already. drivers/net/ethernet/freescale/dpaa/dpaa_eth.c: In function 'sg_fd_to_skb': drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:1712:18: error: 'skb' may be used uninitialized in this function [-Werror=maybe-uninitialized] I'm slightly changing the logic here, to make it obvious to the compiler that 'skb' is always initialized. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Flavio Leitner says: ==================== Allow openvswitch to query ports in another netns. Today Open vSwitch users are moving internal ports to other namespaces and although packets are flowing OK, the userspace daemon can't find out basic information like if the port is UP or DOWN, for instance. This patchset extends openvswitch API to retrieve the current netnsid of a port. It will be used by the userspace daemon to find out in which netns the port is located. This patchset also extends the rtnetlink getlink call to accept and operate on a given netnsid. More details are available in each patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
Currently, when an application gets netnsid from the kernel (for example as the result of RTM_GETLINK call on one end of the veth pair), it's not much useful. There's no reliable way to get to the netns fd from the netnsid, nor does any kernel API accept netnsid. Extend the RTM_GETLINK call to also accept netnsid. It will operate on the netns with the given netnsid in such case. Of course, the calling process needs to have enough capabilities in the target name space; for now, require CAP_NET_ADMIN. This can be relaxed in the future. To signal to the calling process that the kernel understood the new IFLA_IF_NETNSID attribute in the query, it will include it in the response. This is needed to detect older kernels, as they will just ignore IFLA_IF_NETNSID and query in the current name space. This patch implemetns IFLA_IF_NETNSID only for get and dump. For set operations, this can be extended later. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
This patch allows reliable identification of netdevice interfaces connected to openvswitch bridges. In particular, user space queries the netdev interfaces belonging to the ports for statistics, up/down state, etc. Datapath dump needs to provide enough information for the user space to be able to do that. Currently, only interface names are returned. This is not sufficient, as openvswitch allows its ports to be in different name spaces and the interface name is valid only in its name space. What is needed and generally used in other netlink APIs, is the pair ifindex+netnsid. The solution is addition of the ifindex+netnsid pair (or only ifindex if in the same name space) to vport get/dump operation. On request side, ideally the ifindex+netnsid pair could be used to get/set/del the corresponding vport. This is not implemented by this patch and can be added later if needed. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Benc authored
It will be used by openvswitch. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
IN6_ADDR_HSIZE is private to addrconf.c, move it here to avoid confusion. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
pktgen accidentally used IN6_ADDR_HSIZE, instead of using the size of an IPv6 address. Since IN6_ADDR_HSIZE recently was increased from 16 to 256, this old bug is hitting us. Fixes: 3f27fb23 ("ipv6: addrconf: add per netns perturbation in inet6_addr_hash()") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 04 Nov, 2017 8 commits
-
-
Colin Ian King authored
Currently n->flags is being operated on by a logical && operator rather than a bitwise & operator. This looks incorrect as these should be bit flag operations. Fix this. Detected by CoverityScan, CID#1460398 ("Logical vs. bitwise operator") Fixes: 245dc512 ("net: sched: cls_u32: call block callbacks for offload") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Konstantin Khlebnikov authored
Average RTT is 32-bit thus full 64-bit division is redundant. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Suggested-by: Stephen Hemminger <stephen@networkplumber.org> Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vadim Fedorenko authored
Some time ago Eric Dumazet suggested a "hack the IFF_XMIT_DST_RELEASE flag on the vlan netdev". But the last comment was "does not support properly bonding/team.(If the real_dev->privflags IFF_XMIT_DST_RELEASE bit changes, we want to update all the vlans at the same time )" I've extended that patch to support changes of IFF_XMIT_DST_RELEASE in bonding/team. Both bonding and team call netdev_change_features() after recalculation of features including priv_flags IFF_XMIT_DST_RELEASE bit. So the only thing needed to support is to recheck this bit in vlan_transfer_features(). Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Vadim Fedorenko <vfedorenko@yandex-team.ru> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
Fixes the following sparse warnings: drivers/net/phy/phylink.c:570:6: warning: symbol 'phylink_phy_change' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-next-for-davem-2017-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.15 Mostly fixes this time, but also few new features. Major changes: wil6210 * remove ssid debugfs file rsi * add WOWLAN support for suspend, hibernate and shutdown states ath10k * add support for CCMP-256, GCMP and GCMP-256 ciphers on hardware where it's supported (QCA99x0 and QCA4019) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Files removed in 'net-next' had their license header updated in 'net'. We take the remove from 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vijaya Mohan Guvva authored
Return success if the same dispatch function is being registered for a given opcode and subcode, there by allow multiple switchdev enable and disables. Signed-off-by: Vijaya Mohan Guvva <vijaya.guvva@cavium.com> Signed-off-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: Handle changes in GRE configuration Petr says: Until now, when an IP tunnel was offloaded by the mlxsw driver, the offload was pretty much static, and changes in Linux configuration were not reflected in the hardware. That led to discrepancies between traffic flows in slow path and fast path. The work-around used to be to remove all routes that forward to the netdevice and re-add them. This is clearly suboptimal, but actually, as of the decap-only patchset, it's not even enough anymore, and one needs to go all the way and simply drop the tunnel and recreate it correctly. With this patchset, the NETDEV_CHANGE events that are generated for changes of up'd tunnel netdevices are captured and interpreted to correctly reconfigure the HW in accordance with changes requested at the software layer. In addition, NETDEV_CHANGEUPPER, NETDEV_UP and NETDEV_DOWN are now handled not only for tunnel devices themselves, but also for their bound devices. Each change is then translated to one or more of the following updates to the HW configuration: - refresh of offload of local route that corresponds to tunnel's local address - refresh of the loopback RIF - refresh of offloads of routes that forward to the changed tunnel - removal of tunnel offloads These tools are used to implement the following configuration changes: - addition of a new offloadable tunnel with local address that conflicts with that of an already-offloaded tunnel (the existing tunnel is onloaded, the new one isn't offloaded) - changes to TTL, TOS that make tunnel unsuitable for offloading - changes to ikey, okey, remote - changes to local, which when they cause conflict with another tunnel, lead to onloading of both newly-conflicting tunnels - migration of a bound device of an offloaded tunnel device to a different VRF - changes to what device is bound to a tunnel device (i.e. like what "ip tunnel change name g dev another" does) - changes to up / down state of a bound device. A down bound device doesn't forward encapsulated traffic anymore, but decap still works. This patchset starts with a suite of patches that adapt the existing code base step by step to facilitate introduction of the offloading code. The five substantial patches at the end then implement the changes mentioned above. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-