- 31 Aug, 2020 3 commits
-
-
Dave Airlie authored
This can be gotten back from bdev. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826014428.828392-3-airlied@gmail.com
-
Dave Airlie authored
Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200826014428.828392-2-airlied@gmail.com
-
Tian Tao authored
hibmc can only be used in ARM64 architectures, and mmu defaults to y in arch/arm64/Kconfig, so there is no need to add a dependency on mmu in hibmc's kconfig. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1598428528-49046-1-git-send-email-tiantao6@hisilicon.com
-
- 30 Aug, 2020 2 commits
-
-
Sidong Yang authored
This patch avoid the warning in vkms_get_vblank_timestamp when vblanks aren't enabled. When running igt test kms_cursor_crc just after vkms module, the warning raised like below. Initial value of vblank time is zero and hrtimer.node.expires is also zero if vblank aren't enabled before. vkms module isn't real hardware but just virtual hardware module. so vkms can't generate a resonable timestamp when hrtimer is off. it's best to grab the current time. [106444.464503] [IGT] kms_cursor_crc: starting subtest pipe-A-cursor-size-change [106444.471475] WARNING: CPU: 0 PID: 10109 at vkms_get_vblank_timestamp+0x42/0x50 [vkms] [106444.471511] CPU: 0 PID: 10109 Comm: kms_cursor_crc Tainted: G W OE 5.9.0-rc1+ #6 [106444.471514] RIP: 0010:vkms_get_vblank_timestamp+0x42/0x50 [vkms] [106444.471528] Call Trace: [106444.471551] drm_get_last_vbltimestamp+0xb9/0xd0 [drm] [106444.471566] drm_reset_vblank_timestamp+0x63/0xe0 [drm] [106444.471579] drm_crtc_vblank_on+0x85/0x150 [drm] [106444.471582] vkms_crtc_atomic_enable+0xe/0x10 [vkms] [106444.471592] drm_atomic_helper_commit_modeset_enables+0x1db/0x230 [drm_kms_helper] [106444.471594] vkms_atomic_commit_tail+0x38/0xc0 [vkms] [106444.471601] commit_tail+0x97/0x130 [drm_kms_helper] [106444.471608] drm_atomic_helper_commit+0x117/0x140 [drm_kms_helper] [106444.471622] drm_atomic_commit+0x4a/0x50 [drm] [106444.471629] drm_atomic_helper_set_config+0x63/0xb0 [drm_kms_helper] [106444.471642] drm_mode_setcrtc+0x1d9/0x7b0 [drm] [106444.471654] ? drm_mode_getcrtc+0x1a0/0x1a0 [drm] [106444.471666] drm_ioctl_kernel+0xb6/0x100 [drm] [106444.471677] drm_ioctl+0x3ad/0x470 [drm] [106444.471688] ? drm_mode_getcrtc+0x1a0/0x1a0 [drm] [106444.471692] ? tomoyo_file_ioctl+0x19/0x20 [106444.471694] __x64_sys_ioctl+0x96/0xd0 [106444.471697] do_syscall_64+0x37/0x80 [106444.471699] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Melissa Wen <melissa.srw@gmail.com> Signed-off-by:
Sidong Yang <realwakka@gmail.com> Reviewed-by:
Melissa Wen <melissa.srw@gmail.com> Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200828124553.2178-1-realwakka@gmail.com
-
Melissa Wen authored
The VKMS blend function was ignoring the alpha channel and just overwriting vaddr_src with vaddr_dst. This XRGB approach triggers a warning when running the kms_cursor_crc/cursor-alpha-transparent test case. In IGT, cairo_format_argb32 uses premultiplied alpha (according to documentation). Also current DRM assumption is that alpha is premultiplied. Therefore, this patch considers premultiplied alpha blending eq to compose vaddr_src with vaddr_dst. This change removes the following cursor-alpha-transparent warning: "Suspicious CRC: All values are 0." V2: - static for local functions - const for the read-only variable argb_src - replaces variable names - drops unnecessary comment Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Reviewed-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Signed-off-by:
Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200825114532.abzdooluny2ekzvm@smtp.gmail.com
-
- 29 Aug, 2020 5 commits
-
-
Laurent Pinchart authored
The OrtusTech COM43H4M85ULC panel is a 18-bit RGB panel. Commit f098f168 ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") has fixed the bus formats, but forgot to address the bpc value. Set it to 6. Fixes: f098f168 ("drm: panel: Fix bus format for OrtusTech COM43H4M85ULC panel") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200824003254.21904-1-laurent.pinchart@ideasonboard.com
-
Vinod Koul authored
DSI end-points are supposed to be at node 0 and node 1 as per binding. So fix this and use node 0 and node 1 for dsi. Reported-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Fixes: 23278bf5 ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200828074251.3788165-1-vkoul@kernel.org
-
Robert Chiras authored
The flag MIPI_DSI_CLOCK_NON_CONTINUOUS was wrong used in the DSI driver, so it was added to this panel, but not necessary. So, remove this flag since it is not needed. Signed-off-by:
Robert Chiras <robert.chiras@nxp.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1598626713-5595-1-git-send-email-robert.chiras@oss.nxp.com
-
Jagan Teki authored
Add Ampire, AM-1280800N3TZQW-T00H 10.1" TFT LCD panel timings. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200829163328.249211-2-jagan@amarulasolutions.com
-
Jagan Teki authored
Add dt-bindings for 10.1" TFT LCD module from Ampire Co. Ltd. as part of panel-simple. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200829163328.249211-1-jagan@amarulasolutions.com
-
- 27 Aug, 2020 2 commits
-
-
Maxime Ripard authored
The LVDS controller can invert the polarity / lanes of the LVDS output. The default polarity causes some issues on some panels. However, U-Boot has always used the opposite polarity without any reported issue, and the only currently supported LVDS panel in-tree (the TBS A711) seems to be able to work with both settings. Let's just use the same polarity than U-Boot to be more consistent and hopefully support all the panels. Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Reviewed-by:
Chen-Yu Tsai <wens@csie.org> Cc: Ondrej Jirman <megous@megous.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200704133803.37330-1-maxime@cerno.tech
-
Colin Ian King authored
There is a spelling mistake in a drm_warn message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200826084727.42703-1-colin.king@canonical.com
-
- 26 Aug, 2020 8 commits
-
-
Enric Balletbo i Serra authored
Print an error message inside ps8640_bridge_vdo_control() function when it fails so we can simplify a bit the callers, they will only need to check the error code. Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Bilal Wasim <bwasim.lkml@gmail.com> Tested-by:
Bilal Wasim <bwasim.lkml@gmail.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-5-enric.balletbo@collabora.com
-
Enric Balletbo i Serra authored
Bridge drivers that implement the new model only shall return an error from their attach() handler when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is not set. So make sure we return an error because only the new drm_bridge model is supported. Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Bilal Wasim <bwasim.lkml@gmail.com> Tested-by:
Bilal Wasim <bwasim.lkml@gmail.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-4-enric.balletbo@collabora.com
-
Enric Balletbo i Serra authored
The PS8640 DSI-to-eDP bridge can retrieve the EDID, so implement the .get_edid callback and set the flag to indicate the core to use it. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-3-enric.balletbo@collabora.com
-
Enric Balletbo i Serra authored
In an eDP application, HPD is not required and on most bridge chips useless. If HPD is not used, we need to set initial status as connected, otherwise the connector created by the drm_bridge_connector API remains in an unknown state. Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Bilal Wasim <bwasim.lkml@gmail.com> Tested-by:
Bilal Wasim <bwasim.lkml@gmail.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200826081526.674866-2-enric.balletbo@collabora.com
-
Tian Tao authored
Use drm_err instead of DRM_ERROR in hibmc_drm_drv Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-5-git-send-email-tiantao6@hisilicon.com
-
Tian Tao authored
Use drm_err instead of DRM_ERROR in hibmc_drm_de Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-4-git-send-email-tiantao6@hisilicon.com
-
Tian Tao authored
Use drm_err instead of DRM_ERROR in hibmc_drm_vdac Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-3-git-send-email-tiantao6@hisilicon.com
-
Tian Tao authored
Use drm_err instead of DRM_ERROR in hibmc_ttm. Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1597829014-39942-2-git-send-email-tiantao6@hisilicon.com
-
- 24 Aug, 2020 2 commits
-
-
Dave Airlie authored
This is always calculated the same, and only used in a couple of places. Signed-off-by:
Dave Airlie <airlied@redhat.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200811074658.58309-2-airlied@gmail.com
-
Dave Airlie authored
The drivers all do the same thing here. Reviewed-by: Christian König <christian.koenig@amd.com> for both. Signed-off-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200811074658.58309-1-airlied@gmail.com
-
- 23 Aug, 2020 2 commits
-
-
Nadezda Lutovinova authored
If ge_b850v3_lvds_init() does not allocate memory for ge_b850v3_lvds_ptr, then a null pointer dereference is accessed. The patch adds checking of the return value of ge_b850v3_lvds_init(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Nadezda Lutovinova <lutovinova@ispras.ru> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200819143756.30626-1-lutovinova@ispras.ru
-
Vinay Simha BN authored
passing zero to 'PTR_ERR' Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Vinay Simha BN <simhavcs@gmail.com> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/1597557042-5154-1-git-send-email-simhavcs@gmail.com
-
- 21 Aug, 2020 5 commits
-
-
Douglas Anderson authored
Values come from the vendor and have been tested on hardware. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200821083454.2.Idf25356dff4b36c62704188c3e3d39a2010d6f6a@changeid
-
Douglas Anderson authored
The KD116N21-30NV-A010 is a pretty standard eDP panel. Add it to the list of compatible strings. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20200821083454.1.I61e6248813d797c9eeebfbb7019c713aa71c4419@changeid
-
Tomi Valkeinen authored
This patch implements WA for AM65xx erratum i2000, which causes YUV formats to show wrong colors. An earlier patch removed a partial WA: a8d9d7da ("drm/tidss: remove AM65x PG1 YUV erratum code") The patch explains the reasoning for removal. The change in plans has been that it has become clear that there are and will be users for PG1 SoCs and as such it's good to implement the WA for PG1s. This patch adds the WA back so that it is only used on SR1.0 (which is the new name for PG1). The previous WA code didn't check the SoC revision, which this patch does. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200812112625.59897-1-tomi.valkeinen@ti.comReviewed-by:
Jyri Sarha <jsarha@ti.com>
-
Colin Ian King authored
There is a spelling mistake in a pr_err message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200805102015.14891-1-colin.king@canonical.com
-
Linus Walleij authored
The OMAP DRM driver includes <linux/gpio.h> into the two hdmi4.c and hdmi5.c files but does not use any symbols from these files. Drop the includes. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Jyri Sarha <jsarha@ti.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200626220606.340937-1-linus.walleij@linaro.org
-
- 20 Aug, 2020 3 commits
-
-
Paul Cercueil authored
There is already a 'struct device' pointer in the drm_panel structure, that we can access easily from our priv structure, so there's no need for a separate 'dev' field there. Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-3-paul@crapouillou.net
-
Paul Cercueil authored
The drm_panel_of_backlight() function must be called after drm_panel_init(), according to the function's documentation; otherwise the backlight won't be properly initialized. Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20200820121256.32037-2-paul@crapouillou.net
-
Christian König authored
drm-next reverted the changes to ttm_tt_create() to do the NULL check inside the function, but drm-misc-next adds new users of this approach. Re-apply the NULL check change inside the function to fix this. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/386628/
-
- 19 Aug, 2020 4 commits
-
-
Tom Rix authored
Reviewing this block of code in cdv_intel_dp_init() ret = cdv_intel_dp_aux_native_read(gma_encoder, DP_DPCD_REV, ... cdv_intel_edp_panel_vdd_off(gma_encoder); if (ret == 0) { /* if this fails, presume the device is a ghost */ DRM_INFO("failed to retrieve link info, disabling eDP\n"); drm_encoder_cleanup(encoder); cdv_intel_dp_destroy(connector); goto err_priv; } else { The (ret == 0) is not strict enough. cdv_intel_dp_aux_native_read() returns > 0 on success otherwise it is failure. So change to <= Fixes: d112a816 ("gma500/cdv: Add eDP support") Signed-off-by:
Tom Rix <trix@redhat.com> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200805205911.20927-1-trix@redhat.com
-
Linus Walleij authored
Finalize he conversion of GMA500 to use only GPIO descriptors. The GPIO look-up-table is associated with the device directly in the GMA500 Medfield chip driver since no explicit platform type device (such as in x86/platform/intel-mid) exists: the GMA500 probes directly from the PCI device. Apparently GPIOs 128 and 34 are used on all of these so just go ahead and register those for resetting the DSI pipes. Acked-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200703125901.513476-1-linus.walleij@linaro.org
-
Randy Dunlap authored
sparse complains about having 2 "__iomem" attributes on the same line where only one is needed since the first one applies to everything up to the ending ';'. However, to make it clear(er) that both of these pointers are "__iomem", use separate lines for them. ../drivers/gpu/drm/ast/ast_cursor.c:256:26: CK: warning: duplicate [noderef] ../drivers/gpu/drm/ast/ast_cursor.c:256:26: CK: error: multiple address space given: __iomem & __iomem Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Cc: Dave Airlie <airlied@redhat.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/a8185578-a69a-16b0-6fdf-f4e46bc4f61f@infradead.org
-
David Stevens authored
Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
David Stevens <stevensd@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20200819031011.310180-1-stevensd@chromium.orgSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
- 18 Aug, 2020 4 commits
-
-
Sam Ravnborg authored
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Icenowy Zheng <icenowy@aosc.io> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-6-sam@ravnborg.org
-
Sam Ravnborg authored
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-5-sam@ravnborg.org
-
Sam Ravnborg authored
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Cc: Robert Chiras <robert.chiras@nxp.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-4-sam@ravnborg.org
-
Sam Ravnborg authored
Standardize on the dev_ based logging and drop the include of drm_print.h. Fix a few cases where "x@" was used when printing the mode. Signed-off-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
Guido Günther <agx@sigxcpu.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Guido Günther <agx@sigxcpu.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200815125406.1153224-3-sam@ravnborg.org
-