- 25 May, 2018 10 commits
-
-
Michal Wajdeczko authored
Some functions already use i915 name instead of dev_priv. Let's rename this param in all remaining functions, except those that still use legacy macros. v2: don't forget about function descriptions (Sagar) v3: rebased v4: rebased v5: rebased, pulled out from the series Signed-off-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by:
Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180525121858.53928-1-michal.wajdeczko@intel.com
-
Ville Syrjälä authored
Let's suppress the underruns around every modeset sequence instead of trying to avoid it. Planes are disabled at this point anyway so we don't really gain anything from keeping the underrun reporting enabled. Also for PCH ports we already suppress all underruns here anyway so trying avoid it for the CPU eDP doesn't seem all that important. Maybe this gets rid of some lingering spurious underruns? Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180524190406.2973-2-ville.syrjala@linux.intel.comReviewed-by:
-
Ville Syrjälä authored
VBT seems to have some bits to tell us whether the internal LVDS port has something hooked up. In theory one might expect the VBT to not have a child device for the LVDS port if there's no panel hooked up, but in practice many VBTs still add the child device. The "LVDS config" bits seem more reliable though, so let's check those. So far we've used the "LVDS config" bits to check for eDP support on ILK+, and disable the internal LVDS when the value is 3. That value is actually documented as "Both internal LVDS and SDVO LVDS", but in practice it looks to mean "eDP" on all the ilk+ VBTs I've seen. So let's keep that interpretation, but for pre-ILK we will consider the value 3 to also indicate the presence of the internal LVDS. Currently we have 25 DMI matches for the "no internal LVDS" quirk. In an effort to reduce that let's toss in a WARN when the DMI match and VBT both tell us that the internal LVDS is not present. The hope is that people will report a bug, and then we can just nuke the corresponding entry from the DMI quirk list. Credits to Jani for this idea. v2: Split the basic int_lvds_support thing to a separate patch (Jani) v3: Rebase v4: Limit this to VBT version >= 134 Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
My ILK seems to generate a spurious PCH underrun with most interlaced HDMI modes. Add a second vblank wait to avoid it. We have seen some spurious PCH underruns still in CI as well, some of which seem to be progressive DP. The logs also point towards some spurious underrins with progressive HDMI on SNB. While I don't have a solid explanation for those let's try to kill all the birds with one stone and always do the double wait. Buzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106387Signed-off-by:
-
Ville Syrjälä authored
We can always figure out which pipe is affected by the panel power sequencer lockout mechanism. So no need for the pipe A fallback anymore. The only case we may have to worry about is an invalid port select in the power sequencer, but INVALID_PIPE is just fine in that case. We'll get the WARN about the bogus pps port select anyway. Cc: Jani Nikula <jani.nikula@intel.com> Suggested-by:
-
Chris Wilson authored
In order to prepare the GPU for sleeping, we may want to submit commands to it. This is a complicated process that may even require some swapping in from shmemfs, if the GPU was in the wrong state. As such, we need to do this preparation step synchronously before the rest of the system has started to turn off (e.g. swapin fails if scsi is suspended). Fortunately, we are provided with a such a hook, pm_ops.prepare(). v2: Compile cleanup v3: Fewer asserts, fewer problems? v4: Ville pointed out that in some circumstances (such as switching off the overlay) the display code may issue a GPU request. This is unexpected, and will result in us going to sleep with us believing the GPU is still awake (though all user work has been saved). Add a comment to remind our future selves of what trouble brews. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106640 Testcase: igt/drv_suspend after igt/gem_tiled_swapping Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com>
-
Chris Wilson authored
After a reset, we will ensure that there is at least one request submitted to HW to ensure that a context is loaded for powersaving. Let's wait for this submission via a tasklet to complete before we drop our forcewake, ensuring the system is ready for rc6 before we let it possibly sleep. Signed-off-by:
-
Chris Wilson authored
Inside the live_hangcheck (reset) selftests, we occasionally see failures like <7>[ 239.094840] i915_gem_set_wedged rcs0 <7>[ 239.094843] i915_gem_set_wedged current seqno 19a98, last 19a9a, hangcheck 0 [5158 ms] <7>[ 239.094846] i915_gem_set_wedged Reset count: 6239 (global 1) <7>[ 239.094848] i915_gem_set_wedged Requests: <7>[ 239.095052] i915_gem_set_wedged first 19a99 [e8c:5f] prio=1024 @ 5159ms: (null) <7>[ 239.095056] i915_gem_set_wedged last 19a9a [e81:1a] prio=139 @ 5159ms: igt/rcs0[5977]/1 <7>[ 239.095059] i915_gem_set_wedged active 19a99 [e8c:5f] prio=1024 @ 5159ms: (null) <7>[ 239.095062] i915_gem_set_wedged [head 0220, postfix 0280, tail 02a8, batch 0xffffffff_ffffffff] <7>[ 239.100050] i915_gem_set_wedged ring->start: 0x00283000 <7>[ 239.100053] i915_gem_set_wedged ring->head: 0x000001f8 <7>[ 239.100055] i915_gem_set_wedged ring->tail: 0x000002a8 <7>[ 239.100057] i915_gem_set_wedged ring->emit: 0x000002a8 <7>[ 239.100059] i915_gem_set_wedged ring->space: 0x00000f10 <7>[ 239.100085] i915_gem_set_wedged RING_START: 0x00283000 <7>[ 239.100088] i915_gem_set_wedged RING_HEAD: 0x00000260 <7>[ 239.100091] i915_gem_set_wedged RING_TAIL: 0x000002a8 <7>[ 239.100094] i915_gem_set_wedged RING_CTL: 0x00000001 <7>[ 239.100097] i915_gem_set_wedged RING_MODE: 0x00000300 [idle] <7>[ 239.100100] i915_gem_set_wedged RING_IMR: fffffefe <7>[ 239.100104] i915_gem_set_wedged ACTHD: 0x00000000_0000609c <7>[ 239.100108] i915_gem_set_wedged BBADDR: 0x00000000_0000609d <7>[ 239.100111] i915_gem_set_wedged DMA_FADDR: 0x00000000_00283260 <7>[ 239.100114] i915_gem_set_wedged IPEIR: 0x00000000 <7>[ 239.100117] i915_gem_set_wedged IPEHR: 0x02800000 <7>[ 239.100120] i915_gem_set_wedged Execlist status: 0x00044052 00000002 <7>[ 239.100124] i915_gem_set_wedged Execlist CSB read 5 [5 cached], write 5 [5 from hws], interrupt posted? no, tasklet queued? no (enabled) <7>[ 239.100128] i915_gem_set_wedged ELSP[0] count=1, ring->start=00283000, rq: 19a99 [e8c:5f] prio=1024 @ 5164ms: (null) <7>[ 239.100132] i915_gem_set_wedged ELSP[1] count=1, ring->start=00257000, rq: 19a9a [e81:1a] prio=139 @ 5164ms: igt/rcs0[5977]/1 <7>[ 239.100135] i915_gem_set_wedged HW active? 0x5 <7>[ 239.100250] i915_gem_set_wedged E 19a99 [e8c:5f] prio=1024 @ 5164ms: (null) <7>[ 239.100338] i915_gem_set_wedged E 19a9a [e81:1a] prio=139 @ 5164ms: igt/rcs0[5977]/1 <7>[ 239.100340] i915_gem_set_wedged Queue priority: 139 <7>[ 239.100343] i915_gem_set_wedged Q 0 [e98:19] prio=132 @ 5164ms: igt/rcs0[5977]/8 <7>[ 239.100346] i915_gem_set_wedged Q 0 [e84:19] prio=121 @ 5165ms: igt/rcs0[5977]/2 <7>[ 239.100349] i915_gem_set_wedged Q 0 [e87:19] prio=82 @ 5165ms: igt/rcs0[5977]/3 <7>[ 239.100352] i915_gem_set_wedged Q 0 [e84:1a] prio=44 @ 5164ms: igt/rcs0[5977]/2 <7>[ 239.100356] i915_gem_set_wedged Q 0 [e8b:19] prio=20 @ 5165ms: igt/rcs0[5977]/4 <7>[ 239.100362] i915_gem_set_wedged drv_selftest [5894] waiting for 19a99 where the GPU saw an arbitration point and idles; AND HAS NOT BEEN RESET! The RING_MODE indicates that is idle and has the STOP_RING bit set, so try clearing it. v2: Only clear the bit on restarting the ring, as we want to be sure the STOP_RING bit is kept if reset fails on wedging. v3: Spot when the ring state doesn't make sense when re-initialising the engine and dump it to the logs so that we don't have to wait for an error later and try to guess what happened earlier. v4: Prepare to print all the unexpected state, not just the first. Signed-off-by:
Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180518100933.2239-1-chris@chris-wilson.co.uk
-
Tvrtko Ursulin authored
This is to avoid an error with structure declared in parameter list if the include ordering changes. Signed-off-by:
-
Tvrtko Ursulin authored
struct i915_gem_context embeds struct i915_sched_attr so needs to include the respective header. Signed-off-by:
-
- 24 May, 2018 11 commits
-
-
Chris Wilson authored
We were not very carefully checking to see if an older request on the engine was an earlier switch-to-kernel-context before deciding to emit a new switch. The end result would be that we could get into a permanent loop of trying to emit a new request to perform the switch simply to flush the existing switch. What we need is a means of tracking the completion of each timeline versus the kernel context, that is to detect if a more recent request has been submitted that would result in a switch away from the kernel context. To realise this, we need only to look in our syncmap on the kernel context and check that we have synchronized against all active rings. v2: Since all ringbuffer clients currently share the same timeline, we do have to use the gem_context to distinguish clients. As a bonus, include all the tracing used to debug the death inside suspend. v3: Test, test, test. Construct a selftest to exercise and assert the expected behaviour that multiple switch-to-contexts do not emit redundant requests. Reported-by:
Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180524081135.15278-1-chris@chris-wilson.co.uk
-
Dhinakaran Pandiyan authored
While touching the code around this, I noticed that absence of ALPM capability does not stop us from enabling PSR2. But, the spec unambiguously states that ALPM is required for PSR2 and so does this commit that introduced this code drm/i915/psr: enable ALPM for psr2 As per edp1.4 spec , alpm is required for psr2 operation as it's used for all psr2 main link power down management and alpm enable bit must be set for psr2 operation. Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: Vathsala Nagaraju <vathsala.nagaraju@intel.com> Reviewed-by:Vathsala Nagaraju <vathsala.nagaraju@intel.com> Reviewed-by:
Tarun Vyas <tarun.vyas@intel.com> Signed-off-by:
Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
Noticed that we assume the best case of 0 latency when the DPCD read fails, reasonable pessimism is safer. eDP spec does say that if latency is greater than 8, the panel supplier needs to provide it. I didn't see anything specific in the VBT for this, so let's go with 8 frames as a fallback. Cc: Jose Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
intel_dp->psr_dpcd already has the required values. Cc: Jose Roberto de Souza <jose.souza@intel.com> Reviewed-by:
-
Dhinakaran Pandiyan authored
By moving the check from psr_compute_config() to psr_init_dpcd(), we get to set the dev_priv->psr.sink_support flag only when the panel is capable of changing power state. An additional benefit is that the check will be performed only at init time instead of every atomic_check. This should change the psr_basic IGT failures on HSW to skips. v2: Return early when SET_POWER_CAPABLE bit is 0 (Jose) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106217 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106346 Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Dhinakaran Pandiyan authored
Ville noticed that we are unncessarily reading DPCD's after knowing panel did not support PSR. Looks like this check that was present earlier got removed unintentionally, let's put it back. While we do this, add the PSR version number in the debug print. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Dhinakaran Pandiyan authored
PSR hardware and hence the driver code for VLV and CHV deviates a lot from their DDI counterparts. While the feature has been disabled for a long time now, retaining support for these platforms is a maintenance burden. There have been multiple refactoring commits to just keep the existing code for these platforms in line with the rest. There are known issues that need to be fixed to enable PSR on these platforms, and there is no PSR capable platform in CI to ensure the code does not break again if we get around to fixing the existing issues. On account of all these reasons, let's nuke this code for now and bring it back if a need arises in the future. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by:
-
Vathsala Nagaraju authored
For psr block #9, the vbt description has moved to options [0-3] for TP1,TP2,TP3 Wakeup time from decimal value without any change to vbt structure. Since spec does not mention from which VBT version this change was added to vbt.bsf file, we cannot depend on bdb->version check to change for all the platforms. There is RCR inplace for GOP team to provide the version number to make generic change. Since Kabylake with bdb version 209 is having this change, limiting this change to gen9_bc and version 209+ to unblock google. Tested on skl(bdb version 203,without options) and kabylake(bdb version 209,212) having new options. bspec 20131 v2: (Jani and Rodrigo) move the 165 version check to intel_bios.c v3: Jani Move the abstraction to intel_bios. v4: Jani Rename tp*_wakeup_time to have "us" suffix. For values outside range[0-3],default to max 2500us. Old decimal value was wake up time in multiples of 100us. v5: Jani and Rodrigo Handle option 2 in default condition. Print oustide range value. For negetive values default to 2500us. v6: Jani Handle default first and then fall through for case 2. v7: Rodrigo Apply this change for IS_GEN9_BC and vbt version > 209 v8: Puthik Add new function vbt_psr_to_us. v9: Jani Change to v7 version as it's more readable. DK add comment /*fall through*/ after case2. Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Puthikorn Voravootivat <puthik@chromium.org> Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by:Maulik V Vaghela <maulik.v.vaghela@intel.com> Signed-off-by:
-
Yunwei Zhang authored
L3Bank could be fused off in hardware for debug purpose, and it is possible that subslice is enabled while its corresponding L3Bank pairs are disabled. In such case, if MCR packet control register(0xFDC) is programed to point to a disabled bank pair, a MMIO read into L3Bank range will return 0 instead of correct values. However, this is not going to be the case in any production silicon. Therefore, we only check at initialization and issue a warning should this really happen. References: HSDES#1405586840 v2: - use fls instead of find_last_bit (Chris) - use is_power_of_2() instead of counting bit set (Chris) v3: - rebase on latest tip v5: - Added references (Mika) - Move local variable into scope where they are used (Ursulin) - use a new local variable to reduce long line of code (Ursulin) v6: - Some coding style and use more local variables for clearer logic (Ursulin) Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Yunwei Zhang <yunwei.zhang@intel.com> Reviewed-by:
Oscar Mateo <oscar.mateo@intel.com> Signed-off-by:
-
Yunwei Zhang authored
WaProgramMgsrForCorrectSliceSpecificMmioReads applies for Icelake as well. References: HSD#1405586840, BSID#0575 v2: - GEN11 mask is different from its predecessors. (Oscar) - Better separate GEN10 and GEN11. (Oscar) Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
Yunwei Zhang authored
WaProgramMgsrForCorrectSliceSpecificMmioReads dictate that before any MMIO read into Slice/Subslice specific registers, MCR packet control register(0xFDC) needs to be programmed to point to any enabled slice/subslice pair. Otherwise, incorrect value will be returned. However, that means each subsequent MMIO read will be forwarded to a specific slice/subslice combination as read is unicast. This is OK since slice/subslice specific register values are consistent in almost all cases across slice/subslice. There are rare occasions such as INSTDONE that this value will be dependent on slice/subslice combo, in such cases, we need to program 0xFDC and recover this after. This is already covered by read_subslice_reg. Also, 0xFDC will lose its information after TDR/engine reset/power state change. References: HSD#1405586840, BSID#0575 v2: - use fls() instead of find_last_bit() (Chris) - added INTEL_SSEU to extract sseu from device info. (Chris) v3: - rebase on latest tip v5: - Added references (Mika) - Change the ordered of passing arguments and etc. (Ursulin) v7: - Moved WA explanation Comments(Oscar) - Rebased. v8: - Renamed sanitize_mcr to calculate_s_ss_select. (Oscar) - calculate s/ss selector instead of whole mcr. (Oscar) v9: - Updated function name (Oscar) - Remove redundant variables (Oscar) v10: - Separate pre-GEN10 and GEN11 mask. (Oscar) Cc: Oscar Mateo <oscar.mateo@intel.com> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
-
- 23 May, 2018 9 commits
-
-
José Roberto de Souza authored
'Pipe CSC enable' bit is more than just deprecated in ICL+, it was disabled in commit 077ef1f0 ("drm/i915/icl: Don't set pipe CSC/Gamma in PLANE_COLOR_CTL") for primary and sprite planes as it was causing those planes to be rendered as always black but it was not disabled in cursor plane, also causing it to be rendered as black. As mentioned in the commit referenced above, this is a workaround too and the CSC and gamma per plane values needs to be setup before enable CSC and gamma again. BSpec: 4278 and 7635 Cc: James Ausmus <james.ausmus@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Chris Wilson authored
The driver assumes that the kernel context is pinned and always available for use from any process or atomic context. Make it so for selftesting as well! Signed-off-by:
-
Ville Syrjälä authored
We don't support using the power sequencer with other ports besides LVDS on pre-ilk platforms. WARN if someone has mistakenly connected the power sequencer to the wrong port. Signed-off-by:
-
Ville Syrjälä authored
Add the missing eDP port handling into assert_panel_unlocked(). We now have intel_dp_port_enabled() which makes this trivial. Signed-off-by:
-
Ville Syrjälä authored
The power sequencer has bits to allow DP C to be used for eDP. Currently we assume this will never happen, but I guess it could theoretically be a thing. Make the code do the right thing in that case, and toss in a MISSING_CASE() for any other port. Signed-off-by:
-
Ville Syrjälä authored
Clean up the DP pipe select bits. To make the whole situation a bit less ugly we'll start to share the same code between .get_hw_state(), the port state asserts, and the VLV power sequencer code. v2: Return PIPE_A for cpt/ppt when the port isn't selected by any transcoder. Returning INVALID_PIPE explodes *somewhere* on some machines (can't immediately see where though). This now matches the old behaviour. v3: Order the defines shift,mask,value (Jani) Signed-off-by: -
Ville Syrjälä authored
for_each_encoder_on_crtc() is legacy and shouldn't be used by atomic drivers. Let's throw out intel_trans_dp_port_sel() and replace it with intel_get_crtc_new_encoder() which looks the atomic state instead. Since we now have to call intel_get_crtc_new_encoder() during the commit phase we'll need to plumb in the top level atomic state. The crtc_state->state pointers are no longer valid at that point. Signed-off-by:
-
Ville Syrjälä authored
Parametrize the TRANS_DP_PORT_SEL macros. v2: WARN for bogus ports (Jani) Order the defines mask,value (Jani) Reviewed-by: -
Ville Syrjälä authored
The ddi code no longer uses intel_ddi_get_crtc_new_encoder(). Move it elsewhere where we have some users left. Reviewed-by:
-
- 22 May, 2018 8 commits
-
-
Chris Wilson authored
nospec quite reasonably asserts that it will never be used with an index larger than unsigned long (that being the largest possibly index into an C array). However, our ubi uses the convention of u64 for any large integer, running afoul of the assertion on 32b. Reduce our index to an unsigned long, checking for type overflow first. drivers/gpu/drm/i915/i915_query.c: In function 'i915_query_ioctl': include/linux/compiler.h:339:38: error: call to '__compiletime_assert_119' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long) Reported-by: kbuild-all@01.org Fixes: 84b510e2 ("drm/i915/query: Protect tainted function pointer lookup") Signed-off-by:
Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180522121018.15199-1-chris@chris-wilson.co.uk
-
Ville Syrjälä authored
dev_priv->vbt.lvds_vbt is set but never actually used. Kill it. Signed-off-by:
-
Ville Syrjälä authored
Replace dev_priv->vbt.edp.support with dev_priv->vbt.int_lvds_support. We'll want to extend its use beyond the LVDS vs. eDP case in the future. v2: Nuke the edp.support from parse_edp() (Jani) Only clear int_lvds_support for gen5+ to preserve the current behaviour (Jani) Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: -
Chris Wilson authored
As we handle the allocation failure of the page directory and tables by propagating the failure back to userspace, allow it to fail if direct reclaim is unable to satisfy the request (i.e. disable the oomkiller). The premise being that if we are unable to allocate a single page for the pagetable, we will not be able to handle the multitude of pages required for the gfx operation and we should back off to allow the system to recover. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106609Signed-off-by:
Matthew Auld <matthew.william.auld@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180522083643.29601-1-chris@chris-wilson.co.uk
-
Chris Wilson authored
Smatch identifies i915_query_ioctl() as being a potential victim of Spectre due to its use of a tainted user index into a function pointer array. Use array_index_nospec() to defang the user index before using it to lookup the function pointer. Fixes: a446ae2c ("drm/i915: add query uAPI") Signed-off-by:
-
Jani Nikula authored
This reverts commit dc911f5b. Per the report, no matter what display mode you select with xrandr, the i915 driver will always select the alternate fixed mode. For the reporter this means that the display will always run at 40Hz which is quite annoying. This may be due to the mode comparison. But there are some other potential issues. The choice of alt_fixed_mode seems dubious. It's the first non-preferred mode, but there are no guarantees that the only difference would be refresh rate. Similarly, there may be more than one preferred mode in the probed modes list, and the commit changes the preferred mode selection to choose the last one on the list instead of the first. (Note that the probed modes list is the raw, unfiltered, unsorted list of modes from drm_add_edid_modes(), not the pretty result after a drm_helper_probe_single_connector_modes() call.) Finally, we already have eerily similar code in place to find the downclock mode for DRRS that seems like could be reused here. Back to the drawing board. Note: This is a hand-crafted revert due to conflicts. If it fails to backport, please just try reverting the original commit directly. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105469Reported-by:
Rune Petersen <rune@megahurts.dk> Reported-by:
Mark Spencer <n7u4722r35@ynzlx.anonbox.net> Fixes: dc911f5b ("drm/i915/edp: Allow alternate fixed mode for eDP if available.") Cc: Clint Taylor <clinton.a.taylor@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jim Bride <jim.bride@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v4.14+ Signed-off-by:
-
Daniel Stone authored
Since drm_framebuffer can now store GEM objects directly, place them there rather than in our own subclass. v2: Only hold a single reference per framebuffer, not per plane. (Ville) v3: Drop NULL check in intel_fb_obj. (Ville) Signed-off-by:
Daniel Stone <daniels@collabora.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: intel-gfx@lists.freedesktop.org Link: https://patchwork.freedesktop.org/patch/msgid/20180518143008.4120-2-daniels@collabora.com
-
Daniel Stone authored
We already have a macro to pull the GEM object from a FB, so use it everywhere. We'll make use of this later to move the object storage. Signed-off-by:
-
- 21 May, 2018 1 commit
-
-
Zhenyu Wang authored
When we do shadowing, workload's request might not be allocated yet, so we still require shadow context's object. And when complete workload, delay to zero workload's request pointer after used for update guest context. v2: Move request alloc earlier as already try to track shadow status depending on request state, which also facilitate to use request->hw_context for target engine context reference. Fixes: 1fc44d9b ("drm/i915: Store a pointer to intel_context in i915_request") Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Weinan Li <weinan.z.li@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by:
-
- 19 May, 2018 1 commit
-
-
Chris Wilson authored
When testing reset, we wait for 1s on the main thread for the hang to start. Meanwhile, we continue submitting requests on all the background threads, and we may have more threads than cores and so potentially starve the waiter from being woken within the timeout. As the hang timeout and the active timeouts are the same, it is hard to distinguish which caused the timeout. Bump the active thread timeouts to 5s, compared to the 1s timeout for the hang, so that we preferentially report the hang timing out, while hopefully ensuring that we do at least wake up the hang thread first before declaring the background active timeout. Signed-off-by:
-
