- 27 Sep, 2009 11 commits
-
-
Jesse Brandeburg authored
eerd and eewr don't exist on pre PCIe devices Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jesse Brandeburg authored
A large whitespace change to e1000_hw.[ch] in order to update it to kernel coding style (by running lindent). Updated function header comments into kdoc style. Signed-off-by:
-
Jesse Brandeburg authored
adapter was being assigned twice, also clarified variable name and unwrapped line. Signed-off-by:
-
Jesse Brandeburg authored
this patch fixes a bug that occurs when routing packets and simultaneously changing the mtu. the rx_buffer_len variable is used during the rx cleanup and if that changes on the fly without stopping traffic bad things happen Signed-off-by:
-
Jesse Brandeburg authored
1) 82544 does not need last_tx_tso workaround, it interferes with the 82544 workaround too 2) 82544 hang workaround was using the address of the page struct instead of the physical address as its "workaround decider" not sure how that ever worked Signed-off-by:
-
Jesse Brandeburg authored
This fix closes a race where the adapter can be shutting down while hard_start_xmit is being called and interrupts are being handled. Signed-off-by:
-
Jesse Brandeburg authored
e1000 was using one particular way to detect link, but with the advent of some of the newer hardware designs using SERDES connections, tests for link must completely cover all cases. Signed-off-by:
-
Jesse Brandeburg authored
there were some hotplug cases that made timers still run after the driver had been removed, make sure to stop all the timers and not allow racy reschedules. Signed-off-by:
-
Jesse Brandeburg authored
we can use netif_tx_disable now because LLTX has been removed. Signed-off-by:
-
Jesse Brandeburg authored
after removal of pcie, need to remove some unnecessary functions Signed-off-by:
-
Jesse Brandeburg authored
this patch is the first in a series of clean up patches for e1000 to drop unused code, and update the driver to kernel spec, and then, to update the driver to have all available bug fixes. Call it the e1000 weight loss plan. Signed-off-by:
-
- 25 Sep, 2009 4 commits
-
-
David S. Miller authored
Signed-off-by: -
Sriram authored
In the emac_poll function when looking for interrupt status masks correct definition must be chosen based on EMAC_VERSION(the bit mask has changed from version 1 to version 2). Signed-off-by:
Sriram <srk@ti.com> Acked-by:
Chaithrika U S <chaithrika@ti.com> Signed-off-by:
-
Jarek Poplawski authored
Use ax25_cb_put after ax25_find_cb in ax25_ctl_ioctl. Reported-by:
Bernard Pidoux F6BVP <f6bvp@free.fr> Signed-off-by:
Jarek Poplawski <jarkao2@gmail.com> Reviewed-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
-
- 24 Sep, 2009 25 commits
-
-
Johannes Berg authored
Similar to commit d136f1bd, there's a bug when unregistering a generic netlink family, which is caught by the might_sleep() added in that commit: BUG: sleeping function called from invalid context at net/netlink/af_netlink.c:183 in_atomic(): 1, irqs_disabled(): 0, pid: 1510, name: rmmod 2 locks held by rmmod/1510: #0: (genl_mutex){+.+.+.}, at: [<ffffffff8138283b>] genl_unregister_family+0x2b/0x130 #1: (rcu_read_lock){.+.+..}, at: [<ffffffff8138270c>] __genl_unregister_mc_group+0x1c/0x120 Pid: 1510, comm: rmmod Not tainted 2.6.31-wl #444 Call Trace: [<ffffffff81044ff9>] __might_sleep+0x119/0x150 [<ffffffff81380501>] netlink_table_grab+0x21/0x100 [<ffffffff813813a3>] netlink_clear_multicast_users+0x23/0x60 [<ffffffff81382761>] __genl_unregister_mc_group+0x71/0x120 [<ffffffff81382866>] genl_unregister_family+0x56/0x130 [<ffffffffa0007d85>] nl80211_exit+0x15/0x20 [cfg80211] [<ffffffffa000005a>] cfg80211_exit+0x1a/0x40 [cfg80211] Fix in the same way by grabbing the netlink table lock before doing rcu_read_lock(). Signed-off-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Anton Vorontsov authored
Following trace pops up if we try to suspend with 3c59x ethernet NIC brought down: root@b1:~# ifconfig eth16 down root@b1:~# echo mem > /sys/power/state ... 3c59x 0000:00:10.0: suspend 3c59x 0000:00:10.0: PME# disabled Trying to free already-free IRQ 48 ------------[ cut here ]------------ Badness at c00554e4 [verbose debug info unavailable] NIP: c00554e4 LR: c00554e4 CTR: c019a098 REGS: c7975c60 TRAP: 0700 Not tainted (2.6.31-rc4) MSR: 00021032 <ME,CE,IR,DR> CR: 28242422 XER: 20000000 TASK = c79cb0c0[1746] 'bash' THREAD: c7974000 ... NIP [c00554e4] __free_irq+0x108/0x1b0 LR [c00554e4] __free_irq+0x108/0x1b0 Call Trace: [c7975d10] [c00554e4] __free_irq+0x108/0x1b0 (unreliable) [c7975d30] [c005559c] free_irq+0x10/0x24 [c7975d40] [c01e21ec] vortex_suspend+0x70/0xc4 [c7975d60] [c017e584] pci_legacy_suspend+0x58/0x100 This is because the driver manages interrupts without checking for netif_running(). Though, there are few other issues with suspend/resume in this driver. The intention of calling free_irq() in suspend() was to avoid any possible spurious interrupts (see commit 5b039e68 "3c59x PM fixes"). But, - On resume, the driver was requesting IRQ just after pci_set_master(), but before vortex_up() (which actually resets 3c59x chips). - Issuing free_irq() on a shared IRQ doesn't guarantee that a buggy HW won't trigger spurious interrupts in another driver that requested the same interrupt. So, if we want to protect from unexpected interrupts, then on suspend we should issue disable_irq(), not free_irq(). Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by:
-
Eric Dumazet authored
It seems recursion field from "struct ip_tunnel" is not anymore needed. recursion prevention is done at the upper level (in dev_queue_xmit()), since we use HARD_TX_LOCK protection for tunnels. This avoids a cache line ping pong on "struct ip_tunnel" : This structure should be now mostly read on xmit and receive paths. Signed-off-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
-
Sebastian Haas authored
The driver mapped only 128 bytes of the CAN controller address space when a CPC-PCI v2 was detected (incl. CPC-104P). This patch will fix it by always mapping the whole address space (4096 bytes on all boards) of the corresponding PCI BAR. Signed-off-by:
Sebastian Haas <haas@ems-wuensche.com> Signed-off-by:
Wolfgang Grandegger <wg@grandegger.com> Signed-off-by:
-
Jaswinder Singh Rajput authored
DOCPROC Documentation/DocBook/networking.xml Warning(net/sunrpc/clnt.c:647): No description found for parameter 'req' Warning(net/sunrpc/clnt.c:647): No description found for parameter 'tk_ops' Warning(net/sunrpc/clnt.c:647): Excess function parameter 'ops' description in 'rpc_run_bc_task' Signed-off-by:
Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Ricardo Labiaga <Ricardo.Labiaga@netapp.com> Cc: Benny Halevy <bhalevy@panasas.com> Cc: Andy Adamson <andros@netapp.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: David Miller <davem@davemloft.net> Signed-off-by:
-
Rémi Denis-Courmont authored
If we ever implement this, then we can stop returning an error. Signed-off-by:
Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by:
-
Rémi Denis-Courmont authored
Allocating a port number to a socket and hashing that socket shall be an atomic operation with regards to other port allocation. Otherwise, we could allocate a port that is already being allocated to another socket. Signed-off-by:
-
Stephen Hemminger authored
Previous update did not resched in inner loop causing watchdogs. Rewrite inner loop to: * account for delays better with less clock calls * more accurate timing of delay: - only delay if packet was successfully sent - if delay is 100ns and it takes 10ns to build packet then account for that * use wait_event_interruptible_timeout rather than open coding it. Signed-off-by:Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Stephen Hemminger authored
Get rid of unused flag bit. Signed-off-by:
-
Shan Wei authored
Due to man page of setsockopt, if optlen is not valid, kernel should return -EINVAL. But a simple testcase as following, errno is 0, which means setsockopt is successful. addr.s_addr = inet_addr("192.1.2.3"); setsockopt(s, IPPROTO_IP, IP_MULTICAST_IF, &addr, 1); printf("errno is %d\n", errno); Xiaotian Feng(dfeng@redhat.com) caught the bug. We fix it firstly checking the availability of optlen and then dealing with the logic like other options. Reported-by:Xiaotian Feng <dfeng@redhat.com> Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Acked-by:
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Signed-off-by:
-
David S. Miller authored
Conflicts: drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/cpc-usb/TODO drivers/staging/cpc-usb/cpc-usb_drv.c drivers/staging/cpc-usb/cpc.h drivers/staging/cpc-usb/cpc_int.h drivers/staging/cpc-usb/cpcusb.h
-
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intelLinus Torvalds authored
* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (57 commits) drm/i915: Handle ERESTARTSYS during page fault drm/i915: Warn before mmaping a purgeable buffer. drm/i915: Track purged state. drm/i915: Remove eviction debug spam drm/i915: Immediately discard any backing storage for uneeded objects drm/i915: Do not mis-classify clean objects as purgeable drm/i915: Whitespace correction for madv drm/i915: BUG_ON page refleak during unbind drm/i915: Search harder for a reusable object drm/i915: Clean up evict from list. drm/i915: Add tracepoints drm/i915: framebuffer compression for GM45+ drm/i915: split display functions by chip type drm/i915: Skip the sanity checks if the current relocation is valid drm/i915: Check that the relocation points to within the target drm/i915: correct FBC update when pipe base update occurs drm/i915: blacklist Acer AspireOne lid status ACPI: make ACPI button funcs no-ops if not built in drm/i915: prevent FIFO calculation overflows on 32 bits with high dotclocks drm/i915: intel_display.c handle latency variable efficiently ... Fix up trivial conflicts in drivers/gpu/drm/i915/{i915_dma.c|i915_drv.h}
-
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6Linus Torvalds authored
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (21 commits) x86/PCI: make 32 bit NUMA node array int, not unsigned char x86/PCI: default pcibus cpumask to all cpus if it lacks affinity MAINTAINTERS: remove hotplug driver entries PCI: pciehp: remove slot capabilities definitions PCI: pciehp: remove error message definitions PCI: pciehp: remove number field PCI: pciehp: remove hpc_ops PCI: pciehp: remove pci_dev field PCI: pciehp: remove crit_sect mutex PCI: pciehp: remove slot_bus field PCI: pciehp: remove first_slot field PCI: pciehp: remove slot_device_offset field PCI: pciehp: remove hp_slot field PCI: pciehp: remove device field PCI: pciehp: remove bus field PCI: pciehp: remove slot_num_inc field PCI: pciehp: remove num_slots field PCI: pciehp: remove slot_list field PCI: fix VGA arbiter header file PCI: Disable AER with pci=nomsi ... Fixed up trivial conflicts in MAINTAINERS
-
git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds authored
* 'cputime' of git://git390.marist.edu/pub/scm/linux-2.6: [PATCH] Fix idle time field in /proc/uptime
-
git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds authored
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (24 commits) microblaze: Disable heartbeat/enable emaclite in defconfigs microblaze: Support simpleImage.dts make target microblaze: Fix _start symbol to physical address microblaze: Use LOAD_OFFSET macro to get correct LMA for all sections microblaze: Create the LOAD_OFFSET macro used to compute VMA vs LMA offsets microblaze: Copy ppc asm-compat.h for clean handling of constants in asm and C microblaze: Actually show KiB rather than pages in "Freeing initrd memory:" microblaze: Support ptrace syscall tracing. microblaze: Updated CPU version and FPGA family codes in PVR microblaze: Generate correct signal and siginfo for integer div-by-zero microblaze: Don't be noisy when userspace causes hardware exceptions microblaze: Remove ipc.h file which points to non-existing asm-generic file microblaze: Clear sticky FSR register after generating exception signals microblaze: Ensure CPU usermode is set on new userspace processes microblaze: Use correct kbuild variable KBUILD_CFLAGS microblaze: Save and restore msr in hw exception microblaze: Add architectural support for USB EHCI host controllers microblaze: Implement include/asm/syscall.h. microblaze: Improve checking mechanism for MSR instruction microblaze: Add checking mechanism for MSR instruction ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: module: don't call percpu_modfree on NULL pointer. module: fix memory leak when load fails after srcversion/version allocated module: preferred way to use MODULE_AUTHOR param: allow whitespace as kernel parameter separator module: reduce string table for loaded modules (v2) module: reduce symbol table for loaded modules (v2)
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: (42 commits) Btrfs: hash the btree inode during fill_super Btrfs: relocate file extents in clusters Btrfs: don't rename file into dummy directory Btrfs: check size of inode backref before adding hardlink Btrfs: fix releasepage to avoid unlocking extents we haven't locked Btrfs: Fix test_range_bit for whole file extents Btrfs: fix errors handling cached state in set/clear_extent_bit Btrfs: fix early enospc during balancing Btrfs: deal with NULL space info Btrfs: account for space used by the super mirrors Btrfs: fix extent entry threshold calculation Btrfs: remove dead code Btrfs: fix bitmap size tracking Btrfs: don't keep retrying a block group if we fail to allocate a cluster Btrfs: make balance code choose more wisely when relocating Btrfs: fix arithmetic error in clone ioctl Btrfs: add snapshot/subvolume destroy ioctl Btrfs: change how subvolumes are organized Btrfs: do not reuse objectid of deleted snapshot/subvol Btrfs: speed up snapshot dropping ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: truncate: use new helpers truncate: new helpers fs: fix overflow in sys_mount() for in-kernel calls fs: Make unload_nls() NULL pointer safe freeze_bdev: grab active reference to frozen superblocks freeze_bdev: kill bd_mount_sem exofs: remove BKL from super operations fs/romfs: correct error-handling code vfs: seq_file: add helpers for data filling vfs: remove redundant position check in do_sendfile vfs: change sb->s_maxbytes to a loff_t vfs: explicitly cast s_maxbytes in fiemap_check_ranges libfs: return error code on failed attr set seq_file: return a negative error code when seq_path_root() fails. vfs: optimize touch_time() too vfs: optimization for touch_atime() vfs: split generic_forget_inode() so that hugetlbfs does not have to copy it fs/inode.c: add dev-id and inode number for debugging in init_special_inode() libfs: make simple_read_from_buffer conventional
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-currentLinus Torvalds authored
* git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current: lsm: Use a compressed IPv6 string format in audit events Audit: send signal info if selinux is disabled Audit: rearrange audit_context to save 16 bytes per struct Audit: reorganize struct audit_watch to save 8 bytes
-
Rusty Russell authored
The general one handles NULL, the static obsolescent (CONFIG_HAVE_LEGACY_PER_CPU_AREA) one in module.c doesn't; Eric's commit 720eba31 assumed it did, and various frobbings since then kept that assumption. All other callers in module.c all protect it with an if; this effectively does the same as free_init is only goto if we fail percpu_modalloc(). Reported-by:
Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Cc: Eric Dumazet <dada1@cosmosbay.com> Cc: Masami Hiramatsu <mhiramat@redhat.com> Cc: Américo Wang <xiyou.wangcong@gmail.com> Tested-by:
-
Rusty Russell authored
Normally the twisty paths of sysfs will free the attributes, but not if we fail before we hook it into sysfs (which is the last thing we do in load_module). (This sysfs code is a turd, no doubt there are other issues lurking too). Reported-by:
Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by:
-
Johannes Berg authored
For the longest time now we've been using multiple MODULE_AUTHOR() statements when a module has more than one author, but the comment here disagrees. Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Peter Oberparleiter authored
Some boot mechanisms require that kernel parameters are stored in a separate file which is loaded to memory without further processing (e.g. the "Load from FTP" method on s390). When such a file contains newline characters, the kernel parameter preceding the newline might not be correctly parsed (due to the newline being stuck to the end of the actual parameter value) which can lead to boot failures. This patch improves kernel command line usability in such a situation by allowing generic whitespace characters as separators between kernel parameters. Signed-off-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
-
Jan Beulich authored
Also remove all parts of the string table (referenced by the symbol table) that are not needed for kallsyms use (i.e. which were only referenced by symbols discarded by the previous patch, or not referenced at all for whatever reason). Signed-off-by:
Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Jan Beulich authored
Discard all symbols not interesting for kallsyms use: absolute, section, and in the common case (!KALLSYMS_ALL) data ones. Signed-off-by:
-
