SGI Modid: 2.5.x-xfs:slinx:143053a

for unwritten extent writes.

SGI Modid: 2.5.x-xfs:slinx:143052a

SGI Modid: 2.5.x-xfs:slinx:142797a

[XFS] remove busy inode check in the umount path - Linux checked it for us before calling into the filesystem.  We're beyond the point of no return for umount anyway

SGI Modid: 2.5.x-xfs:slinx:142731a

This version fixes:
- missing rtnl_lock()/rtnl_unload() bug on unregister_hdlc_device
- N2, C101: interrupt handler now works under high IRQ load from other
  devices (with previous versions, the IRQ processing for the card could
  sometimes stop after reaching "work limit")

This is production-tested on devices I have access to (N2, C101, PC300,
PCI200SYN).

This patch disables irqbalance and doesn't spawn a kernel thread for
systems which run SMP kernels and only have one online cpu.

This finally kills of blk_queue_empty().  This is similar to the patch I
recently sent to fix the SCSI logic as well.  A lot of drivers are doing
this in our core, mainly because that is the way they always did it:

start_queue:
	if (blk_queue_empty(q))
		return;

	rq = elv_next_request(q);
	if (!rq)
		return;

Patch simply removes the blk_queue_empty() check, and adds a check for
!rq return from elv_next_request() if the driver didn't already do that.

Additionally, the AS io scheduler can return NULL from
elv_next_request() if it thinks this is best. This way we are also
prepared for that to work well.

Patch was done by Nick Piggin.

Bug report from J Sanchez in #kernelnewbies

into home.transmeta.com:/home/torvalds/v2.5/linux

The problem with setiathome is that it displays something every now and
then - so it gets a backboost from X, and hovers at a relatively high
priority.

This comment seems to want to include SET_MODULE_OWNER as one of the
deprecated facilities.

Looks like a cut-n-paste thinko in the Kconfig file..

Make it compile again and various cleanups and a few bug fixes.  Only
changes x86-64 specific files.

Most of it are S3 suspend changes from Pavel and comment spelling fixes
from Steven Cole.

- Remove now obsolete check_cpu function
- Fix sys_ioctl prototype
- Small optimization - use SYSCALL for 32bit signal handling.
- Fix S3 suspend handling and split into individual files like i386 (Pavel)
- Merge from i386 (pci fixes etc.)
- Set correct paging attributes for IOMMU aperture
- Fix disable apic option

The ipc multiplexer syscall on x86 currently returns EINVAL for a
non-existing sub-opcode.  This logical but is a problem with the
introduction of new operations (like semtimedop).  Now EINVAL can mean
"no such operation" and "invalid parameter".  To avoid such problems in
future, could you apply the attached patch?

update diffserv URL, patch provided by Tero Pelander (tpeland@tkukoulu.fi).

A gconf update by Romain Liévin <roms@tilp.info>
- fixed bug when double-clicking for changing value.
- expand row when enabling a row with a submenu.
- various bug fixes

The semantically correct approach is for register_module_notifier not to
exist at all.  That way is #ifdef hell.

So this just makes it an empty function (and also adds a missing
comment).

This trivial patch removes some now unused data structures from
mach-visws/mpparse.c

Visual Workstations 320/540 are SGI products, so IMHO they can use
penguin with SGI logo as mips does :))

This fixes the mighty penguin logo not appearing on visual workstation
framebuffer.  The trouble is missing 'case FB_VISUAL_PSEUDOCOLOR:' in
fb_prepare_logo() function.

This fixes the visws framebuffer driver which needs vm_area_struct from
linux/mm.h

into home.transmeta.com:/home/torvalds/v2.5/linux

Here is the cleanup patch I promised back in February.  Sorry it took a
while.

The effects should be purely cosmetic in 2.5.66.  However, the new
interface for the proper way to send thread-specific of process-global
signals from inside the kernel is needed for correct implementation of
some fixes to timer stuff that Ulrich told me about.

This cleans up some obsolete comments and macros in kernel/signal.c,
restores send_sig_info to its original behavior, and adds a global entry
point send_group_sig_info.  I checked all the uses of send_sig and
send_sig_info and changed a few to send_group_sig_info.

I think it would be cleanest if the whole mess of *_sig* entry points were
reduced to two or three, but I did the change that minimized the number of
callers I had to fix up.

There should be no discernible difference, since the 2.5.66 send_sig_info
function did group semantics for those signals by number already.  The only
exception to that is pdeath_signal, which I guess can be any signal number
but I deemed ought to be process-wide.

I did not change any of the calls using SIGKILL, though that does have
process-wide semantics.  There is no need to change it since SIGKILL always
kills the whole group, though the code path for send_sig(SIGKILL,...) calls
in multithreaded processes will be different now.

OK, so I screwed up - didn't notice the late_initcall() that was
introduced, which was obviously bogus. This one should build OK for the
module case. I've tested insmod/rmmod alongside a mounted sysfs.

I think the built-in case is OK: oprofile/ is after kernel/ in the link
order. I tested that too.

ACPI is performing a spin_lock() on a `void *'.  That's OK when spin_lock is
implemented via an inline function.  But when it is implemented via macros
it causes compile-time breakage.

So cast it to the right type. It really should be fixed not to use opaque
handles, though.

This fixes some performance problems.  Some vendors implement firmware
updates over IPMI, and this speeds up that process quite a bit.

 * Improve the "send - wait for response - send -wait for response -
   etc" performance when using high-res timers.  Before, an ~10ms delay
   would be added to each message, because it didn't restart the timer
   if nothing was happing when a new message was started.

 * Add some checking for leaked messages.

We really need a memory barrier in smp_call_function(), so that the
other cpu's get the updated value when they get IPI'd immediately
afterwards.

This seems to be true on some old (and arguably broken) hardware where
the IPI generation and reception doesn't synchronize enough.

into home.transmeta.com:/home/torvalds/v2.5/linux

into nuts.ninka.net:/home/davem/src/BK/net-2.5

into nuts.ninka.net:/home/davem/src/BK/net-2.5

Spotted by Dominik Brodowski

Date: Mon, 31 Mar 2003 14:39:54 -0300 (ART)
From: Pablo Menichini <pablo@menichini.com.ar>

This patch swaps the arguments of kmalloc, and relax the type
of allocation to GFP_KERNEL as others PnP functions do.

Pablo

Date: Mon, 31 Mar 2003 14:39:54 -0300 (ART)
From: Pablo Menichini <pablo@menichini.com.ar>

This patch swaps the arguments of kmalloc, and relax the type
of allocation to GFP_KERNEL as others PnP functions do.

Pablo