Let's place the main API selections at the media/Kconfig file,
as this way we can better organize things.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This option is part of V4L2 API extra functionality set.
Move it to be at the v4l2-core/Kconfig, where it belongs,
cleaning the main Kconfig file.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In order to cleanup the main media Kconfig, move the DVB-core
specific options to dvb-core/Kconfig.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There's no need to have the CEC definitions inside the
media Kconfig, as the Kconfig parser doesn't require
symbols to be declared before their usages.

With that, the main Kconfig menu becomes cleaner.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As per a tester feedback, add an option to report when
the drivers are filtered at the Kconfig menu.

Cc: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The per-device option selection is a feature that some
developers love, while others hate...

So, let's make both happy by making it optional.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The media subsystem has hundreds of driver-specific options.
The *_SUPPORT config options work as a sort of filter,
allowing to reduce its complexity for users that won't
want to dig into thousands of options they don't need.

Yet, it the filtering options are becoming large. So, let's
place it on a sub-menu.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The comments before some of the drivers support look
weird, because their Kconfig have their own "comment"
directive inside it. So, rearrange them to make it
look a little nicer for the ones with are not too
familiar with the media system.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are lots of drivers that only work when the media controller
and/or the V4L2 subdev APIs are present.

Right now, someone need to first enable those APIs before
using those drivers.

Well, ideally, drivers, should, instead *optionally*
depend on it, in order for PC camera drivers to be able to use
them, but nowadays most drivers are UVC cameras, with don't
require a sensor driver.

So, be it.

Let's instead make them select the MEDIA_CONTROLLER and the
SUBDEV API, in order to make easier for people to be able
of enabling them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

All modern Linux distributions nowadays use udev or some
alternative (like systemd). So, it makes sense to change
the default to use dynamic minors.

Please notice that this default doesn't enable any code.
It just changes the dvb-core behavior.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Most of media Kconfig/Makefile files already has SPDX,
but there are a few ones still missing. Add it to them.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are some long-time mistakes related to build test
drivers, with regards to depends on/select. Also, as we
now want to build any test driver without needing to
enable anything else, change the logic in order to properly
filter them.

Please notice that the PCI skeleton is somewhat an
exception, as it requires to select *both* SAMPLES and
MEDIA_TEST_SUPPORT. I almost changed it to be either one,
but decided to keep it as-is, as this is something that
we don't really need to be included on any distribution.

The only reason for someone to build it is for COMPILE_TEST
purposes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Right now, if one has an hybrid TV card, it has to select
both analog and digital TV support, as otherwise the needed
core support won't be selected.

Change the logic to auto-select the core support for those
drivers, as this is a way more intuitive.

It should be noticed that, as now both DVB_CORE and VIDEO_DEV
defaults depends on selecting a hybrid cards, we had to remove
the explicit dependencies there, in order to avoid circular
dependencies.

That requires some tricks:

1) the prompt should not be not visible when an hybrid card
   is selected, as the user shold not change it.

2) When a media hybrid device is selected, the modular
   option for DVB_CORE and VIDEO_DEV will follow the
   MEDIA_SUPPORT dependency, as we can't have a core
   built with "y" with a driver built as module.

Note: while here, moved two pure V4L2 PCI drivers out of the
"hybrid" part of config and consider pvrusb2 as an hybrid
device.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

both DVB_CORE and VIDEO_DEV already depends on MEDIA_SUPPORT,
as they're below an if block.

So, remove this double dependency.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Neither the PCI skeleton nor the DVB dummy driver are real
drivers. They're there just as an example for a driver
writter.

Distros should not enable those drivers. So, hide them if
MEDIA_TEST_SUPPORT is not selected.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Cleanup the ddbridge's dummy driver by removing the parts
that aren't needed by ddbridge, adding it to the building
system and changing the binding at the driver to use the
newer function name.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As the name of this driver is now ddbridge-dummy, do some
renames internally.

No functional changes.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

As we'll be transforming the dvb-dummy-fe driver soon into a
virtual driver, let's first copy the existing one to ddbridge
as-is, as it is needed there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This comment should only be visible if the DVB_FIREDTV
config will show.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This option is used only by av7110 and by an USB driver. As
the av7110 is the first DVB hardware, hardly found those
days, let's opt to place it at usb/Kconfig, as the driver
with needs it might have a longer lifetime.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Showing this comment without showing the Siano mmc option
is very weird! Place the option together, and make it
visible only when showing Siano configuration.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

When the first test device was added (vivi.c), there were just
one file. I was too lazy on that time to create a separate
directory just for it, so I kept it together with platform.

Now, we have vivid, vicodec, vim2m and vimc. Also, a new
virtual driver has been prepared to support DVB API.

So, it is time to solve this mess, by placing test stuff
on a separate directory.

It should be noticed that we also have some skeleton drivers
(for V4L and for DVB). For now, we'll keep them separate,
as they're not really test drivers, but instead, just
examples. The DVB frontend ones will likely be part of a new DVB
test driver. By that time, it should make sense to move them
here as well.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

There are more things than just cameras and TV devices on
media. Update the help message accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The V4L2 PCI skeleton is not part of the V4L2 core. Move it
to appear together with the other PCI drivers, at the end,
as this is something that normal users don't even need to
bother.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

When the platform drivers got added, they were all part of
complex camera support. This is not the case anymore, as we
now have codecs and other stuff there too.

So, fix the dependencies, in order to not require users to
manually select something that it doesn't make sense.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Most systems don't need support for those, while others only
need those, instead of the others.

So, add an option to filter in/out platform drivers.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

At least some of the supported boards by dvb-usb
driver need to load the cypress firmware, so select
it, as otherwise missing dependencies may popup.

Also, as the cypress firmware load routines are needed
only by the dvb-usb, dvb-usb-v2 and go7007 drivers, and
those all (now) select it, there's no need to ask the
user for manually select it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

This sorts the actual field names too, potentially causing even more
chaos and confusion at merge time if you have edited the MAINTAINERS
file.  But the end result is a more consistent layout, and hopefully
it's a one-time pain minimized by doing this just before the -rc1
release.

This was entirely scripted:

  ./scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS --order
Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

They are all supposed to be sorted, but people who add new entries don't
always know the alphabet.  Plus sometimes the entry names get edited,
and people don't then re-order the entry.

Let's see how painful this will be for merging purposes (the MAINTAINERS
file is often edited in various different trees), but Joe claims there's
relatively few patches in -next that touch this, and doing it just
before -rc1 is likely the best time.  Fingers crossed.

This was scripted with

  /scripts/parse-maintainers.pl --input=MAINTAINERS --output=MAINTAINERS

but then I also ended up manually upper-casing a few entry names that
stood out when looking at the end result.
Requested-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 fixes from Thomas Gleixner:
 "A set of three patches to fix the fallout of the newly added split
  lock detection feature.

  It addressed the case where a KVM guest triggers a split lock #AC and
  KVM reinjects it into the guest which is not prepared to handle it.

  Add proper sanity checks which prevent the unconditional injection
  into the guest and handles the #AC on the host side in the same way as
  user space detections are handled. Depending on the detection mode it
  either warns and disables detection for the task or kills the task if
  the mode is set to fatal"

* tag 'x86-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest
  KVM: x86: Emulate split-lock access as a write in emulator
  x86/split_lock: Provide handle_guest_split_lock()

Pull time(keeping) updates from Thomas Gleixner:

 - Fix the time_for_children symlink in /proc/$PID/ so it properly
   reflects that it part of the 'time' namespace

 - Add the missing userns limit for the allowed number of time
   namespaces, which was half defined but the actual array member was
   not added. This went unnoticed as the array has an exessive empty
   member at the end but introduced a user visible regression as the
   output was corrupted.

 - Prevent further silent ucount corruption by adding a BUILD_BUG_ON()
   to catch half updated data.

* tag 'timers-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  ucount: Make sure ucounts in /proc/sys/user don't regress again
  time/namespace: Add max_time_namespaces ucount
  time/namespace: Fix time_for_children symlink

Pull scheduler fixes/updates from Thomas Gleixner:

 - Deduplicate the average computations in the scheduler core and the
   fair class code.

 - Fix a raise between runtime distribution and assignement which can
   cause exceeding the quota by up to 70%.

 - Prevent negative results in the imbalanace calculation

 - Remove a stale warning in the workqueue code which can be triggered
   since the call site was moved out of preempt disabled code. It's a
   false positive.

 - Deduplicate the print macros for procfs

 - Add the ucmap values to the SCHED_DEBUG procfs output for completness

* tag 'sched-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Add task uclamp values to SCHED_DEBUG procfs
  sched/debug: Factor out printing formats into common macros
  sched/debug: Remove redundant macro define
  sched/core: Remove unused rq::last_load_update_tick
  workqueue: Remove the warning in wq_worker_sleeping()
  sched/fair: Fix negative imbalance in imbalance calculation
  sched/fair: Fix race between runtime distribution and assignment
  sched/fair: Align rq->avg_idle and rq->avg_scan_cost

Pull perf fixes from Thomas Gleixner:
 "Three fixes/updates for perf:

   - Fix the perf event cgroup tracking which tries to track the cgroup
     even for disabled events.

   - Add Ice Lake server support for uncore events

   - Disable pagefaults when retrieving the physical address in the
     sampling code"

* tag 'perf-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Disable page faults when getting phys address
  perf/x86/intel/uncore: Add Ice Lake server uncore support
  perf/cgroup: Correct indirection in perf_less_group_idx()
  perf/core: Fix event cgroup tracking

Pull locking fixes from Thomas Gleixner:
 "Three small fixes/updates for the locking core code:

   - Plug a task struct reference leak in the percpu rswem
     implementation.

   - Document the refcount interaction with PID_MAX_LIMIT

   - Improve the 'invalid wait context' data dump in lockdep so it
     contains all information which is required to decode the problem"

* tag 'locking-urgent-2020-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Improve 'invalid wait context' splat
  locking/refcount: Document interaction with PID_MAX_LIMIT
  locking/percpu-rwsem: Fix a task_struct refcount

Pull cifs fixes from Steve French:
 "Ten cifs/smb fixes:

   - five RDMA (smbdirect) related fixes

   - add experimental support for swap over SMB3 mounts

   - also a fix which improves performance of signed connections"

* tag '5.7-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: enable swap on SMB3 mounts
  smb3: change noisy error message to FYI
  smb3: smbdirect support can be configured by default
  cifs: smbd: Do not schedule work to send immediate packet on every receive
  cifs: smbd: Properly process errors on ib_post_send
  cifs: Allocate crypto structures on the fly for calculating signatures of incoming packets
  cifs: smbd: Update receive credits before sending and deal with credits roll back on failure before sending
  cifs: smbd: Check send queue size before posting a send
  cifs: smbd: Merge code to track pending packets
  cifs: ignore cached share root handle closing errors

Pull NFS client bugfix from Trond Myklebust:
 "Fix an RCU read lock leakage in pnfs_alloc_ds_commits_list()"

* tag 'nfs-for-5.7-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  pNFS: Fix RCU lock leakage

Pull nios2 updates from Ley Foon Tan:

 - Remove nios2-dev@lists.rocketboards.org from MAINTAINERS

 - remove 'resetvalue' property

 - rename 'altr,gpio-bank-width' -> 'altr,ngpio'

 - enable the common clk subsystem on Nios2

* tag 'nios2-v5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  MAINTAINERS: Remove nios2-dev@lists.rocketboards.org
  arch: nios2: remove 'resetvalue' property
  arch: nios2: rename 'altr,gpio-bank-width' -> 'altr,ngpio'
  arch: nios2: Enable the common clk subsystem on Nios2

Pull dma-mapping fixes from Christoph Hellwig:

 - fix an integer truncation in dma_direct_get_required_mask
   (Kishon Vijay Abraham)

 - fix the display of dma mapping types (Grygorii Strashko)

* tag 'dma-mapping-5.7-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-debug: fix displaying of dma allocation type
  dma-direct: fix data truncation in dma_direct_get_required_mask()

Pull more Kbuild updates from Masahiro Yamada:

 - raise minimum supported binutils version to 2.23

 - remove old CONFIG_AS_* macros that we know binutils >= 2.23 supports

 - move remaining CONFIG_AS_* tests to Kconfig from Makefile

 - enable -Wtautological-compare warnings to catch more issues

 - do not support GCC plugins for GCC <= 4.7

 - fix various breakages of 'make xconfig'

 - include the linker version used for linking the kernel into
   LINUX_COMPILER, which is used for the banner, and also exposed to
   /proc/version

 - link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y, which
   allows us to remove the lib-ksyms.o workaround, and to solve the last
   known issue of the LLVM linker

 - add dummy tools in scripts/dummy-tools/ to enable all compiler tests
   in Kconfig, which will be useful for distro maintainers

 - support the single switch, LLVM=1 to use Clang and all LLVM utilities
   instead of GCC and Binutils.

 - support LLVM_IAS=1 to enable the integrated assembler, which is still
   experimental

* tag 'kbuild-v5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (36 commits)
  kbuild: fix comment about missing include guard detection
  kbuild: support LLVM=1 to switch the default tools to Clang/LLVM
  kbuild: replace AS=clang with LLVM_IAS=1
  kbuild: add dummy toolchains to enable all cc-option etc. in Kconfig
  kbuild: link lib-y objects to vmlinux forcibly when CONFIG_MODULES=y
  MIPS: fw: arc: add __weak to prom_meminit and prom_free_prom_memory
  kbuild: remove -I$(srctree)/tools/include from scripts/Makefile
  kbuild: do not pass $(KBUILD_CFLAGS) to scripts/mkcompile_h
  Documentation/llvm: fix the name of llvm-size
  kbuild: mkcompile_h: Include $LD version in /proc/version
  kconfig: qconf: Fix a few alignment issues
  kconfig: qconf: remove some old bogus TODOs
  kconfig: qconf: fix support for the split view mode
  kconfig: qconf: fix the content of the main widget
  kconfig: qconf: Change title for the item window
  kconfig: qconf: clean deprecated warnings
  gcc-plugins: drop support for GCC <= 4.7
  kbuild: Enable -Wtautological-compare
  x86: update AS_* macros to binutils >=2.23, supporting ADX and AVX2
  crypto: x86 - clean up poly1305-x86_64-cryptogams.S by 'make clean'
  ...