Skip to content

L
linux
Switch branch/tag
  1. 16 Dec, 2010 11 commits
  3. 09 Dec, 2010 1 commit
    • Christoph Hellwig's avatar
      xfs: log timestamp changes to the source inode in rename · 05340d4a
      Christoph Hellwig authored 
      Now that we don't mark VFS inodes dirty anymore for internal
timestamp changes, but rely on the transaction subsystem to push
them out, we need to explicitly log the source inode in rename after
updating it's timestamps to make sure the changes actually get
forced out by sync/fsync or an AIL push.

We already account for the fourth inode in the log reservation, as a
rename of directories needs to update the nlink field, so just
adding the xfs_trans_log_inode call is enough.

This fixes the xfsqa 065 regression introduced by:

	"xfs: don't use vfs writeback for pure metadata modifications"
Signed-off-by: default avatarChristoph Hellwig <hch@lst.de>
Reviewed-by: default avatarDave Chinner <dchinner@redhat.com>
Signed-off-by: default avatarAlex Elder <aelder@sgi.com>
      05340d4a
  5. 01 Dec, 2010 5 commits
    • Dave Chinner's avatar
      xfs: only run xfs_error_test if error injection is active · c76febef
      Dave Chinner authored 
      Recent tests writing lots of small files showed the flusher thread
being CPU bound and taking a long time to do allocations on a debug
kernel. perf showed this as the prime reason:

             samples  pcnt function                    DSO
             _______ _____ ___________________________ _________________

           224648.00 36.8% xfs_error_test              [kernel.kallsyms]
            86045.00 14.1% xfs_btree_check_sblock      [kernel.kallsyms]
            39778.00  6.5% prandom32                   [kernel.kallsyms]
            37436.00  6.1% xfs_btree_increment         [kernel.kallsyms]
            29278.00  4.8% xfs_btree_get_rec           [kernel.kallsyms]
            27717.00  4.5% random32                    [kernel.kallsyms]

Walking btree blocks during allocation checking them requires each
block (a cache hit, so no I/O) call xfs_error_test(), which then
does a random32() call as the first operation.  IOWs, ~50% of the
CPU is being consumed just testing whether we need to inject an
error, even though error injection is not active.

Kill this overhead when error injection is not active by adding a
global counter of active error traps and only calling into
xfs_error_test when fault injection is active.
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      c76febef
    • Dave Chinner's avatar
      xfs: avoid moving stale inodes in the AIL · de25c181
      Dave Chinner authored 
      When an inode has been marked stale because the cluster is being
freed, we don't want to (re-)insert this inode into the AIL. There
is a race condition where the cluster buffer may be unpinned before
the inode is inserted into the AIL during transaction committed
processing. If the buffer is unpinned before the inode item has been
committed and inserted, then it is possible for the buffer to be
released and hence processthe stale inode callbacks before the inode
is inserted into the AIL.

In this case, we then insert a clean, stale inode into the AIL which
will never get removed by an IO completion. It will, however, get
reclaimed and that triggers an assert in xfs_inode_free()
complaining about freeing an inode still in the AIL.

This race can be avoided by not moving stale inodes forward in the AIL
during transaction commit completion processing. This closes the
race condition by ensuring we never insert clean stale inodes into
the AIL. It is safe to do this because a dirty stale inode, by
definition, must already be in the AIL.
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      de25c181
    • Dave Chinner's avatar
      xfs: delayed alloc blocks beyond EOF are valid after writeback · 309c8480
      Dave Chinner authored 
      There is an assumption in the parts of XFS that flushing a dirty
file will make all the delayed allocation blocks disappear from an
inode. That is, that after calling xfs_flush_pages() then
ip->i_delayed_blks will be zero.

This is an invalid assumption as we may have specualtive
preallocation beyond EOF and they are recorded in
ip->i_delayed_blks. A flush of the dirty pages of an inode will not
change the state of these blocks beyond EOF, so a non-zero
deeelalloc block count after a flush is valid.

The bmap code has an invalid ASSERT() that needs to be removed, and
the swapext code has a bug in that while it swaps the data forks
around, it fails to swap the i_delayed_blks counter associated with
the fork and hence can get the block accounting wrong.
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      309c8480
    • Dave Chinner's avatar
      xfs: push stale, pinned buffers on trylock failures · 90810b9e
      Dave Chinner authored 
      As reported by Nick Piggin, XFS is suffering from long pauses under
highly concurrent workloads when hosted on ramdisks. The problem is
that an inode buffer is stuck in the pinned state in memory and as a
result either the inode buffer or one of the inodes within the
buffer is stopping the tail of the log from being moved forward.

The system remains in this state until a periodic log force issued
by xfssyncd causes the buffer to be unpinned. The main problem is
that these are stale buffers, and are hence held locked until the
transaction/checkpoint that marked them state has been committed to
disk. When the filesystem gets into this state, only the xfssyncd
can cause the async transactions to be committed to disk and hence
unpin the inode buffer.

This problem was encountered when scaling the busy extent list, but
only the blocking lock interface was fixed to solve the problem.
Extend the same fix to the buffer trylock operations - if we fail to
lock a pinned, stale buffer, then force the log immediately so that
when the next attempt to lock it comes around, it will have been
unpinned.
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      90810b9e
    • Dave Chinner's avatar
      xfs: fix failed write truncation handling. · c726de44
      Dave Chinner authored 
      Since the move to the new truncate sequence we call xfs_setattr to
truncate down excessively instanciated blocks.  As shown by the testcase
in kernel.org BZ #22452 that doesn't work too well.  Due to the confusion
of the internal inode size, and the VFS inode i_size it zeroes data that
it shouldn't.

But full blown truncate seems like overkill here.  We only instanciate
delayed allocations in the write path, and given that we never released
the iolock we can't have converted them to real allocations yet either.

The only nasty case is pre-existing preallocation which we need to skip.
We already do this for page discard during writeback, so make the delayed
allocation block punching a generic function and call it from the failed
write path as well as xfs_aops_discard_page. The callers are
responsible for ensuring that partial blocks are not truncated away,
and that they hold the ilock.

Based on a fix originally from Christoph Hellwig. This version used
filesystem blocks as the range unit.
Signed-off-by: default avatarDave Chinner <dchinner@redhat.com>
Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      c726de44
  7. 30 Nov, 2010 2 commits
  9. 29 Nov, 2010 18 commits
  11. 28 Nov, 2010 3 commits
    • Linus Torvalds's avatar
      Export 'get_pipe_info()' to other users · c66fb347
      Linus Torvalds authored 
      And in particular, use it in 'pipe_fcntl()'.

The other pipe functions do not need to use the 'careful' version, since
they are only ever called for things that are already known to be pipes.

The normal read/write/ioctl functions are called through the file
operations structures, so if a file isn't a pipe, they'd never get
called.  But pipe_fcntl() is special, and called directly from the
generic fcntl code, and needs to use the same careful function that the
splice code is using.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      c66fb347
    • Linus Torvalds's avatar
      Rename 'pipe_info()' to 'get_pipe_info()' · 71993e62
      Linus Torvalds authored 
      .. and change it to take the 'file' pointer instead of an inode, since
that's what all users want anyway.

The renaming is preparatory to exporting it to other users.  The old
'pipe_info()' name was too generic and is already used elsewhere, so
before making the function public we need to use a more specific name.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Jones <davej@redhat.com>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      71993e62
    • Linus Torvalds's avatar
      Merge branch 'perf-fixes-for-linus' of... · a9e40a24
      Linus Torvalds authored 
      Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix the software context switch counter
  perf, x86: Fixup Kconfig deps
  x86, perf, nmi: Disable perf if counters are not accessible
  perf: Fix inherit vs. context rotation bug
      a9e40a24
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7