Pull crypto fixes from Herbert Xu:
 "This fixes the aesni setkey error and removes a couple of unnecessary
  NULL checks in the Intel qat driver"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: aesni - fix failing setkey for rfc4106-gcm-aesni
  crypto: qat - Deletion of unnecessary checks before two function calls

Pull networking fixes from David Miller:

 1) mlx4 driver bug fixes (TX queue wakeups, csum complete indications)
    from Ido Shamay, Eran Ben Elisha, and Or Gerlitz.

 2) Missing unlock in error path of PTP support in renesas driver, from
    Dan Carpenter.

 3) Add Vitesse 8641 phy IDs to vitesse PHY driver, from Shaohui Xie.

 4) Bnx2x driver bug fixes (linearization of encap packets, scratchpad
    parity error notifications, flow-control and speed settings) from
    Yuval Mintz, Manish Chopra, Shahed Shaikh, and Ariel Elior.

 5) ipv6 extension header parsing in the igb chip has a HW errata,
    disable it.  Frm Todd Fujinaka.

 6) Fix PCI link state locking issue in e1000e driver, from Yanir
    Lubetkin.

 7) Cure panics during MTU change in i40e, from Mitch Williams.

 8) Don't leak promisc refs in DSA slave driver, from Gilad Ben-Yossef.

 9) Add missing HAS_DMA dep to VIA Rhine driver, from Geery
    Uytterhoeven.

10) Make sure DMA map/unmap calls are symmetric in bnx2x driver, from
    Michal Schmidt.

11) Workaround for MDIO access problems in bcm7xxx devices, from FLorian
    Fainelli.

12) Fix races in SCTP protocol between OTTB responses and route
    removals, from Alexander Sverdlin.

13) Fix jumbo frame checksum issue with some mvneta devices, from Simon
    Guinot.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (58 commits)
  sock_diag: don't broadcast kernel sockets
  net: mvneta: disable IP checksum with jumbo frames for Armada 370
  ARM: mvebu: update Ethernet compatible string for Armada XP
  net: mvneta: introduce compatible string "marvell, armada-xp-neta"
  api: fix compatibility of linux/in.h with netinet/in.h
  net: icplus: fix typo in constant name
  sis900: Trivial: Fix typos in enums
  stmmac: Trivial: fix typo in constant name
  sctp: Fix race between OOTB responce and route removal
  net-Liquidio: Delete unnecessary checks before the function call "vfree"
  vmxnet3: Bump up driver version number
  amd-xgbe: Add the __GFP_NOWARN flag to Rx buffer allocation
  net: phy: mdio-bcm-unimac: workaround initial read failures for integrated PHYs
  net: bcmgenet: workaround initial read failures for integrated PHYs
  net: phy: bcm7xxx: workaround MDIO management controller initial read
  bnx2x: fix DMA API usage
  net: via: VIA_RHINE and VIA_VELOCITY should depend on HAS_DMA
  net/phy: tune get_phy_c45_ids to support more c45 phy
  bnx2x: fix lockdep splat
  net: fec: don't access RACC register when not available
  ...

Pul IOMMU fixes from Joerg Roedel:
 "Four fixes have queued up to fix regressions introduced after v4.1:

   - Don't fail IOMMU driver initialization when the add_device
     call-back returns -ENODEV, as that just means that the device is
     not translated by the IOMMU.  This is pretty common on ARM.

   - Two fixes for the ARM-SMMU driver for a wrong feature check and to
     remove a redundant NULL check.

   - A fix for the AMD IOMMU driver to fix a boot panic on systems where
     the BIOS requests Unity Mappings in the IVRS table"

* tag 'iommu-fixes-v4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Introduce protection_domain_init() function
  iommu/arm-smmu: Delete an unnecessary check before the function call "free_io_pgtable_ops"
  iommu/arm-smmu: Fix broken ATOS check
  iommu: Ignore -ENODEV errors from add_device call-back

Pull sound fixes from Takashi Iwai:
 "Here are a bunch of small fixes, mostly for HD-audio quirks, in
  addition to a few regression fixes and trivial cleanups"

* tag 'sound-fix-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: Fix uninintialized error return
  ALSA: hda: Delete an unnecessary check before the function call "snd_info_free_entry"
  ALSA: hda - Add a fixup for Dell E7450
  ALSA: hda - Fix the dock headphone output on Fujitsu Lifebook E780
  ALSA: hda - Add headset support to Acer Aspire V5
  ALSA: hda - restore the MIC FIXUP for some Dell machines
  ALSA: jack: Fix endless loop at unique index detection
  ALSA: hda - set proper caps for newer AMD hda audio in KB/KV
  ALSA: hda - Disable widget power-save for VIA codecs
  ALSA: hda - Fix Dock Headphone on Thinkpad X250 seen as a Line Out

Avoid the warning:

  WARNING: mm/built-in.o(.text.unlikely+0xc22): Section mismatch in reference from the function .new_kmalloc_cache() to the variable .init.rodata:kmalloc_info
  The function .new_kmalloc_cache() references
  the variable __initconst kmalloc_info.
Signed-off-by: Christoph Lameter <cl@linux.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull power management and ACPI fixes from Rafael Wysocki:
 "These are fixes that didn't make it to the previous PM+ACPI pull
  request or are fixing issues introduced by it.

  Specifics:

   - Fix a recently added memory leak in an error path in the ACPI
     resources management code (Dan Carpenter)

   - Fix a build warning triggered by an ACPI video header function that
     should be static inline (Borislav Petkov)

   - Change names of helper function converting struct fwnode_handle
     pointers to either struct device_node or struct acpi_device
     pointers so they don't conflict with local variable names
     (Alexander Sverdlin)

   - Make the hibernate core re-enable nonboot CPUs on failures to
     disable them as expected (Vitaly Kuznetsov)

   - Increase the default timeout of the device suspend watchdog to
     prevent it from triggering too early on some systems (Takashi Iwai)

   - Prevent the cpuidle powernv driver from registering idle states
     with CPUIDLE_FLAG_TIMER_STOP set if CONFIG_TICK_ONESHOT is unset
     which leads to boot hangs (Preeti U Murthy)"

* tag 'pm+acpi-4.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  tick/idle/powerpc: Do not register idle states with CPUIDLE_FLAG_TIMER_STOP set in periodic mode
  PM / sleep: Increase default DPM watchdog timeout to 60
  PM / hibernate: re-enable nonboot cpus on disable_nonboot_cpus() failure
  ACPI / OF: Rename of_node() and acpi_node() to to_of_node() and to_acpi_node()
  ACPI / video: Inline acpi_video_set_dmi_backlight_type
  ACPI / resources: free memory on error in add_region_before()

Pull xen updates from David Vrabel:
 "Xen features and cleanups for 4.2-rc0:

   - add "make xenconfig" to assist in generating configs for Xen guests

   - preparatory cleanups necessary for supporting 64 KiB pages in ARM
     guests

   - automatically use hvc0 as the default console in ARM guests"

* tag 'for-linus-4.2-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  block/xen-blkback: s/nr_pages/nr_segs/
  block/xen-blkfront: Remove invalid comment
  block/xen-blkfront: Remove unused macro MAXIMUM_OUTSTANDING_BLOCK_REQS
  arm/xen: Drop duplicate define mfn_to_virt
  xen/grant-table: Remove unused macro SPP
  xen/xenbus: client: Fix call of virt_to_mfn in xenbus_grant_ring
  xen: Include xen/page.h rather than asm/xen/page.h
  kconfig: add xenconfig defconfig helper
  kconfig: clarify kvmconfig is for kvm
  xen/pcifront: Remove usage of struct timeval
  xen/tmem: use BUILD_BUG_ON() in favor of BUG_ON()
  hvc_xen: avoid uninitialized variable warning
  xenbus: avoid uninitialized variable warning
  xen/arm: allow console=hvc0 to be omitted for guests
  arm,arm64/xen: move Xen initialization earlier
  arm/xen: Correctly check if the event channel interrupt is present

Pull module updates from Rusty Russell:
 "Main excitement here is Peter Zijlstra's lockless rbtree optimization
  to speed module address lookup.  He found some abusers of the module
  lock doing that too.

  A little bit of parameter work here too; including Dan Streetman's
  breaking up the big param mutex so writing a parameter can load
  another module (yeah, really).  Unfortunately that broke the usual
  suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were
  appended too"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits)
  modules: only use mod->param_lock if CONFIG_MODULES
  param: fix module param locks when !CONFIG_SYSFS.
  rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
  module: add per-module param_lock
  module: make perm const
  params: suppress unused variable error, warn once just in case code changes.
  modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.
  kernel/module.c: avoid ifdefs for sig_enforce declaration
  kernel/workqueue.c: remove ifdefs over wq_power_efficient
  kernel/params.c: export param_ops_bool_enable_only
  kernel/params.c: generalize bool_enable_only
  kernel/module.c: use generic module param operaters for sig_enforce
  kernel/params: constify struct kernel_param_ops uses
  sysfs: tightened sysfs permission checks
  module: Rework module_addr_{min,max}
  module: Use __module_address() for module_address_lookup()
  module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING
  module: Optimize __module_address() using a latched RB-tree
  rbtree: Implement generic latch_tree
  seqlock: Introduce raw_read_seqcount_latch()
  ...

Pull ARC architecture updates from Vineet Gupta:

 - support for HS38 cores based on ARCv2 ISA

     ARCv2 is the next generation ISA from Synopsys and basis for the
     HS3{4,6,8} families of processors which retain the traditional ARC mantra of
     low power and configurability and are now more performant and feature rich.

     HS38x is a 10 stage pipeline core which supports MMU (with huge pages) and
     SMP (upto 4 cores) among other features.

     + www.synopsys.com/dw/ipdir.php?ds=arc-hs38-processor
     + http://news.synopsys.com/2014-10-14-New-DesignWare-ARC-HS38-Processor-Doubles-Performance-for-Embedded-Linux-Applications
     + http://www.embedded.com/electronics-news/4435975/Synopsys-ARC-HS38-core-gives-2X-boost-to-Linux-based-apps

 - support for ARC SDP (Software Development platform): Main Board + CPU Cards
    = AXS101: CPU Card with ARC700 in silicon @ 700 MHz
    = AXS103: CPU Card with HS38x in FPGA

 - refactoring of ARCompact port to accomodate new ARCv2 ISA

 - misc updates/cleanups

* tag 'arc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: (72 commits)
  ARC: Fix build failures for ARCompact in linux-next after ARCv2 support
  ARCv2: Allow older gcc to cope with new regime of ARCv2/ARCompact support
  ARCv2: [vdk] dts files and defconfig for HS38 VDK
  ARCv2: [axs103] Support ARC SDP FPGA platform for HS38x cores
  ARC: [axs101] Prepare for AXS103
  ARCv2: [nsim*hs*] Support simulation platforms for HS38x cores
  ARCv2: All bits in place, allow ARCv2 builds
  ARCv2: SLC: Handle explcit flush for DMA ops (w/o IO-coherency)
  ARCv2: STAR 9000837815 workaround hardware exclusive transactions livelock
  ARC: Reduce bitops lines of code using macros
  ARCv2: barriers
  arch: conditionally define smp_{mb,rmb,wmb}
  ARC: add smp barriers around atomics per Documentation/atomic_ops.txt
  ARC: add compiler barrier to LLSC based cmpxchg
  ARCv2: SMP: intc: IDU 2nd level intc for dynamic IRQ distribution
  ARCv2: SMP: clocksource: Enable Global Real Time counter
  ARCv2: SMP: ARConnect debug/robustness
  ARCv2: SMP: Support ARConnect (MCIP) for Inter-Core-Interrupts et al
  ARC: make plat_smp_ops weak to allow over-rides
  ARCv2: clocksource: Introduce 64bit local RTC counter
  ...

This function contains the common parts between the
initialization of dma_ops_domains and usual protection
domains. This also fixes a long-standing bug which was
uncovered by recent changes, in which the api_lock was not
initialized for dma_ops_domains.
Reported-by: George Wang <xuw2015@gmail.com>
Tested-by: George Wang <xuw2015@gmail.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Pull arch/tile updates from Chris Metcalf:
 "These are a grab bag of changes to improve debugging and respond to a
  variety of issues raised on LKML over the last couple of months"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: avoid a "label not used" warning in do_page_fault()
  tile: vdso: use raw_read_seqcount_begin() in vdso
  tile: force CONFIG_TILEGX if ARCH != tilepro
  tile: improve stack backtrace
  tile: fix "odd fault" warning for stack backtraces
  tile: set up initial stack top to honor STACK_TOP_DELTA
  tile: support delivering NMIs for multicore backtrace
  drivers/tty/hvc/hvc_tile.c: properly return -EAGAIN
  tile: add <asm/word-at-a-time.h> and enable support functions
  tile: use READ_ONCE() in arch_spin_is_locked()
  tile: modify arch_spin_unlock_wait() semantics

Pull more s390 updates from Martin Schwidefsky:
 "There is one larger patch for the AP bus code to make it work with the
  longer reset periods of the latest crypto cards.

  A new default configuration, a naming cleanup for SMP and a few fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/kdump: fix compile for !SMP
  s390/kdump: fix nosmt kernel parameter
  s390: new default configuration
  s390/smp: cleanup core vs. cpu in the SCLP interface
  s390/smp: fix sigp cpu detection loop
  s390/zcrypt: Fixed reset and interrupt handling of AP queues
  s390/kdump: fix REGSET_VX_LOW vector register ELF notes
  s390/bpf: Fix backward jumps

Pull CIFS/SMB3 updates from Steve French:
 "Includes two bug fixes, as well as (minimal) support for the new
  protocol dialect (SMB3.1.1), and support for two ioctls including
  reflink (duplicate extents) file copy and set integrity"

* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Unset CIFS_MOUNT_POSIX_PATHS flag when following dfs mounts
  Update negotiate protocol for SMB3.11 dialect
  Add ioctl to set integrity
  Add Get/Set Integrity Information structure definitions
  Add reflink copy over SMB3.11 with new FSCTL_DUPLICATE_EXTENTS
  Add SMB3.11 mount option synonym for new dialect
  add struct FILE_STANDARD_INFO
  Make dialect negotiation warning message easier to read
  Add defines and structs for smb3.1 dialect
  Allow parsing vers=3.11 on cifs mount
  client MUST ignore EncryptionKeyLength if CAP_EXTENDED_SECURITY is set

Pul xfs updates from Dave Chinner:
 "There's a couple of small API changes to the core DAX code which
  required small changes to the ext2 and ext4 code bases, but otherwise
  everything is within the XFS codebase.

  This update contains:

   - A new sparse on-disk inode record format to allow small extents to
     be used for inode allocation when free space is fragmented.

   - DAX support.  This includes minor changes to the DAX core code to
     fix problems with lock ordering and bufferhead mapping abuse.

   - transaction commit interface cleanup

   - removal of various unnecessary XFS specific type definitions

   - cleanup and optimisation of freelist preparation before allocation

   - various minor cleanups

   - bug fixes for
	- transaction reservation leaks
	- incorrect inode logging in unwritten extent conversion
	- mmap lock vs freeze ordering
	- remote symlink mishandling
	- attribute fork removal issues"

* tag 'xfs-for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (49 commits)
  xfs: don't truncate attribute extents if no extents exist
  xfs: clean up XFS_MIN_FREELIST macros
  xfs: sanitise error handling in xfs_alloc_fix_freelist
  xfs: factor out free space extent length check
  xfs: xfs_alloc_fix_freelist() can use incore perag structures
  xfs: remove xfs_caddr_t
  xfs: use void pointers in log validation helpers
  xfs: return a void pointer from xfs_buf_offset
  xfs: remove inst_t
  xfs: remove __psint_t and __psunsigned_t
  xfs: fix remote symlinks on V5/CRC filesystems
  xfs: fix xfs_log_done interface
  xfs: saner xfs_trans_commit interface
  xfs: remove the flags argument to xfs_trans_cancel
  xfs: pass a boolean flag to xfs_trans_free_items
  xfs: switch remaining xfs_trans_dup users to xfs_trans_roll
  xfs: check min blks for random debug mode sparse allocations
  xfs: fix sparse inodes 32-bit compile failure
  xfs: add initial DAX support
  xfs: add DAX IO path support
  ...

Pull btrfs updates from Chris Mason:
 "Outside of our usual batch of fixes, this integrates the subvolume
  quota updates that Qu Wenruo from Fujitsu has been working on for a
  few releases now.  He gets an extra gold star for making btrfs smaller
  this time, and fixing a number of quota corners in the process.

  Dave Sterba tested and integrated Anand Jain's sysfs improvements.
  Outside of exporting a symbol (ack'd by Greg) these are all internal
  to btrfs and it's mostly cleanups and fixes.  Anand also attached some
  of our sysfs objects to our internal device management structs instead
  of an object off the super block.  It will make device management
  easier overall and it's a better fit for how the sysfs files are used.
  None of the existing sysfs files are moved around.

  Thanks for all the fixes everyone"

* 'for-linus-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (87 commits)
  btrfs: delayed-ref: double free in btrfs_add_delayed_tree_ref()
  Btrfs: Check if kobject is initialized before put
  lib: export symbol kobject_move()
  Btrfs: sysfs: add support to show replacing target in the sysfs
  Btrfs: free the stale device
  Btrfs: use received_uuid of parent during send
  Btrfs: fix use-after-free in btrfs_replay_log
  btrfs: wait for delayed iputs on no space
  btrfs: qgroup: Make snapshot accounting work with new extent-oriented qgroup.
  btrfs: qgroup: Add the ability to skip given qgroup for old/new_roots.
  btrfs: ulist: Add ulist_del() function.
  btrfs: qgroup: Cleanup the old ref_node-oriented mechanism.
  btrfs: qgroup: Switch self test to extent-oriented qgroup mechanism.
  btrfs: qgroup: Switch to new extent-oriented qgroup mechanism.
  btrfs: qgroup: Switch rescan to new mechanism.
  btrfs: qgroup: Add new qgroup calculation function btrfs_qgroup_account_extents().
  btrfs: backref: Add special time_seq == (u64)-1 case for btrfs_find_all_roots().
  btrfs: qgroup: Add new function to record old_roots.
  btrfs: qgroup: Record possible quota-related extent for qgroup.
  btrfs: qgroup: Add function qgroup_update_counters().
  ...

Pull more block layer patches from Jens Axboe:
 "A few later arrivers that I didn't fold into the first pull request,
  so we had a chance to run some testing.  This contains:

   - NVMe:
        - Set of fixes from Keith
        - 4.4 and earlier gcc build fix from Andrew

   - small set of xen-blk{back,front} fixes from Bob Liu.

   - warnings fix for bogus inline statement in I_BDEV() from Geert.

   - error code fixup for SG_IO ioctl from Paolo Bonzini"

* 'for-linus' of git://git.kernel.dk/linux-block:
  drivers/block/nvme-core.c: fix build with gcc-4.4.4
  bdi: Remove "inline" keyword from exported I_BDEV() implementation
  block: fix bogus EFAULT error from SG_IO ioctl
  NVMe: Fix filesystem deadlock on removal
  NVMe: Failed controller initialization fixes
  NVMe: Unify controller probe and resume
  NVMe: Don't use fake status on cancelled command
  NVMe: Fix device cleanup on initialization failure
  drivers: xen-blkfront: only talk_to_blkback() when in XenbusStateInitialising
  xen/block: add multi-page ring support
  driver: xen-blkfront: move talk_to_blkback to a more suitable place
  drivers: xen-blkback: delay pending_req allocation to connect_ring

Kernel sockets do not hold a reference for the network namespace to
which they point.  Socket destruction broadcasting relies on the
network namespace and will cause the splat below when a kernel socket
is destroyed.

This fix simply ignores kernel sockets when they are destroyed.

Reported as:
general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
CPU: 1 PID: 9130 Comm: kworker/1:1 Not tainted 4.1.0-gelk-debug+ #1
Workqueue: sock_diag_events sock_diag_broadcast_destroy_work
Stack:
 ffff8800b9c586c0 ffff8800b9c586c0 ffff8800ac4692c0 ffff8800936d4a90
 ffff8800352efd38 ffffffff8469a93e ffff8800352efd98 ffffffffc09b9b90
 ffff8800352efd78 ffff8800ac4692c0 ffff8800b9c586c0 ffff8800831b6ab8
Call Trace:
 [<ffffffff8469a93e>] ? mutex_unlock+0xe/0x10
 [<ffffffffc09b9b90>] ? inet_diag_handler_get_info+0x110/0x1fb [inet_diag]
 [<ffffffff845c868d>] netlink_broadcast+0x1d/0x20
 [<ffffffff8469a93e>] ? mutex_unlock+0xe/0x10
 [<ffffffff845b2bf5>] sock_diag_broadcast_destroy_work+0xd5/0x160
 [<ffffffff8408ea97>] process_one_work+0x147/0x420
 [<ffffffff8408f0f9>] worker_thread+0x69/0x470
 [<ffffffff8409fda3>] ? preempt_count_sub+0xa3/0xf0
 [<ffffffff8408f090>] ? rescuer_thread+0x320/0x320
 [<ffffffff84093cd7>] kthread+0x107/0x120
 [<ffffffff84093bd0>] ? kthread_create_on_node+0x1b0/0x1b0
 [<ffffffff8469d31f>] ret_from_fork+0x3f/0x70
 [<ffffffff84093bd0>] ? kthread_create_on_node+0x1b0/0x1b0

Tested:
  Using a debug kernel while 'ss -E' is running:
  ip netns add test-ns
  ip netns delete test-ns

Fixes: eb4cb008 sock_diag: define destruction multicast groups
Fixes: 26abe143 net: Modify sk_alloc to not reference count the
  netns of kernel sockets.
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Craig Gallek <kraig@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Guinot says:

====================
Fix Ethernet jumbo frames support for Armada 370 and 38x

This patch series fixes the Ethernet jumbo frames support for the SoCs
Armada 370, 380 and 385. Unlike Armada XP, the Ethernet controller for
this SoCs don't support TCP/IP checksumming with a frame size larger
than 1600 bytes.

This patches should be applied to the -stable kernels 3.8 and onwards.

Changes since v1:
- Use a new compatible string for the Ethernet IP found in Armada XP
  SoCs (instead of using an optional property).
- Fix the issue for the Armada 380 and 385 SoCs as well.

Changes since v2:
- Add Acked-by from Gregory Clement.
- Add "Fixes:" tag to each commits.

Changes since v3:
- Fix patch 3 name: replace prefix "ARM: mvebu:" with "net: mvneta:".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The Ethernet controller found in the Armada 370, 380 and 385 SoCs don't
support TCP/IP checksumming with frame sizes larger than 1600 bytes.

This patch fixes the issue by disabling the features NETIF_F_IP_CSUM and
NETIF_F_TSO for the Armada 370 and compatibles SoCs when the MTU is set
to a value greater than 1600 bytes.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Cc: <stable@vger.kernel.org> # v3.8+
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch updates the Ethernet DT nodes for Armada XP SoCs with the
compatible string "marvell,armada-xp-neta".
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Fixes: 77916519 ("arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces")
Cc: <stable@vger.kernel.org> # v3.8+
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mvneta driver supports the Ethernet IP found in the Armada 370, XP,
380 and 385 SoCs. Since at least one more hardware feature is available
for the Armada XP SoCs then a way to identify them is needed.

This patch introduces a new compatible string "marvell,armada-xp-neta".
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Fixes: c5aff182 ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Cc: <stable@vger.kernel.org> # v3.8+
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

u
This fixes breakage to iproute2 build with recent kernel headers
caused by:
   commit a263653e
   Author: Pablo Neira Ayuso <pablo@netfilter.org>
   Date:   Wed Jun 17 10:28:27 2015 -0500

   netfilter: don't pull include/linux/netfilter.h from netns headers

The issue is that definitions in linux/in.h overlap with those
in netinet/in.h. This patch solves this by introducing the same
mechanism as was used to solve the same problem with linux/in6.h
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This fixes a typo in the IPG_FRAMETOOLONGERRORS constant.
Signed-off-by: Nik Nyby <nikolas@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The free_io_pgtable_ops() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

Commit 83a60ed8 ("iommu/arm-smmu: fix ARM_SMMU_FEAT_TRANS_OPS
condition") accidentally negated the ID0_ATOSNS predicate in the ATOS
feature check, causing the driver to attempt ATOS requests on SMMUv2
hardware without the ATOS feature implemented.

This patch restores the predicate to the correct value.

Cc: <stable@vger.kernel.org> # 4.0+
Reported-by: Varun Sethi <varun.sethi@freescale.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

The -ENODEV error just means that the device is not
translated by an IOMMU. We shouldn't bail out of iommu
driver initialization when that happens, as this is a common
scenario on ARM.

Not returning -ENODEV in the drivers would be a bad idea, as
the IOMMU core would have no indication whether a device is
translated or not. This indication is not used at the
moment, but will probably be in the future.

Fixes: 19762d70 ("iommu: Propagate error in add_iommu_group")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Eric Auger <eric.auger@linaro.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

"reigster" -> "register"
Signed-off-by: Nik Nyby <nikolas@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

In a dfs setup where the client transitions from a server which supports
posix paths to a server which doesn't support posix paths, the flag
CIFS_MOUNT_POSIX_PATHS is not reset. This leads to the wrong directory
separator being used causing smb commands to fail.

Consider the following case where a dfs share on a samba server points
to a share on windows smb server.
 # mount -t cifs -o .. //vm140-31/dfsroot/testwin/
 # ls -l /mnt; touch /mnt/a
 total 0
 touch: cannot touch ‘/mnt/a’: No such file or directory
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Steve French <steve.french@primarydata.com>

This fixes a typo in the MMC_RX_CRC_ERROR constant.
Signed-off-by: Nik Nyby <nikolas@gnu.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull md updates from Neil Brown:
 "A mixed bag

   - a few bug fixes
   - some performance improvement that decrease lock contention
   - some clean-up

  Nothing major"

* tag 'md/4.2' of git://neil.brown.name/md:
  md: clear Blocked flag on failed devices when array is read-only.
  md: unlock mddev_lock on an error path.
  md: clear mddev->private when it has been freed.
  md: fix a build warning
  md/raid5: ignore released_stripes check
  md/raid5: per hash value and exclusive wait_for_stripe
  md/raid5: split wait_for_stripe and introduce wait_for_quiescent
  wait: introduce wait_event_exclusive_cmd
  md: convert to kstrto*()
  md/raid10: make sync_request_write() call bio_copy_data()

This patch restores the slab creation sequence that was broken by commit
4066c33d and also reverts the portions that introduced the
KMALLOC_LOOP_XXX macros. Those can never really work since the slab creation
is much more complex than just going from a minimum to a maximum number.

The latest upstream kernel boots cleanly on my machine with a 64 bit x86
configuration under KVM using either SLAB or SLUB.

Fixes: 4066c33d ("support the slub_debug boot option")
Reported-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull libnvdimm subsystem from Dan Williams:
 "The libnvdimm sub-system introduces, in addition to the
  libnvdimm-core, 4 drivers / enabling modules:

  NFIT:
    Instantiates an "nvdimm bus" with the core and registers memory
    devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware
    Interface table).

    After registering NVDIMMs the NFIT driver then registers "region"
    devices.  A libnvdimm-region defines an access mode and the
    boundaries of persistent memory media.  A region may span multiple
    NVDIMMs that are interleaved by the hardware memory controller.  In
    turn, a libnvdimm-region can be carved into a "namespace" device and
    bound to the PMEM or BLK driver which will attach a Linux block
    device (disk) interface to the memory.

  PMEM:
    Initially merged in v4.1 this driver for contiguous spans of
    persistent memory address ranges is re-worked to drive
    PMEM-namespaces emitted by the libnvdimm-core.

    In this update the PMEM driver, on x86, gains the ability to assert
    that writes to persistent memory have been flushed all the way
    through the caches and buffers in the platform to persistent media.
    See memcpy_to_pmem() and wmb_pmem().

  BLK:
    This new driver enables access to persistent memory media through
    "Block Data Windows" as defined by the NFIT.  The primary difference
    of this driver to PMEM is that only a small window of persistent
    memory is mapped into system address space at any given point in
    time.

    Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access
    different portions of the media.  BLK-mode, by definition, does not
    support DAX.

  BTT:
    This is a library, optionally consumed by either PMEM or BLK, that
    converts a byte-accessible namespace into a disk with atomic sector
    update semantics (prevents sector tearing on crash or power loss).

    The sinister aspect of sector tearing is that most applications do
    not know they have a atomic sector dependency.  At least today's
    disk's rarely ever tear sectors and if they do one almost certainly
    gets a CRC error on access.  NVDIMMs will always tear and always
    silently.  Until an application is audited to be robust in the
    presence of sector-tearing the usage of BTT is recommended.

  Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
  Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
  Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
  Wysocki, and Bob Moore"

* tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits)
  arch, x86: pmem api for ensuring durability of persistent memory updates
  libnvdimm: Add sysfs numa_node to NVDIMM devices
  libnvdimm: Set numa_node to NVDIMM devices
  acpi: Add acpi_map_pxm_to_online_node()
  libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only
  pmem: flag pmem block devices as non-rotational
  libnvdimm: enable iostat
  pmem: make_request cleanups
  libnvdimm, pmem: fix up max_hw_sectors
  libnvdimm, blk: add support for blk integrity
  libnvdimm, btt: add support for blk integrity
  fs/block_dev.c: skip rw_page if bdev has integrity
  libnvdimm: Non-Volatile Devices
  tools/testing/nvdimm: libnvdimm unit test infrastructure
  libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory
  nd_btt: atomic sector updates
  libnvdimm: infrastructure for btt devices
  libnvdimm: write blk label set
  libnvdimm: write pmem label set
  libnvdimm: blk labels and namespace instantiation
  ...

Static analysis with cppcheck found the following error:
  [sound/core/init.c:118]: (error) Uninitialized variable: err

..this was introduced by commit 2471b6c8
("ALSA: info: Register proc entries recursively, too") where the call
to snd_info_card_register was removed and no longer setting the error
return in err.  When snd_info_create_card_entry fails to allocate a
an entry, the error path exits with garbage in err.  Fix is to return
-ENOMEM if entry fails to be allocated.

Fixes: 2471b6c8 ("ALSA: info: Register proc entries recursively, too")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull dmaengine updates from Vinod Koul:
 "This time we have support for few new devices, few new features and
  odd fixes spread thru the subsystem.

  New devices added:
   - support for CSRatlas7 dma controller
   - Allwinner H3(sun8i) controller
   - TI DMA crossbar driver on DRA7x
   - new pxa driver

  New features added:
   - memset support is bought back now that we have a user in xdmac controller
   - interleaved transfers support different source and destination strides
   - supporting DMA routers and configuration thru DT
   - support for reusing descriptors
   - xdmac memset and interleaved transfer support
   - hdmac support for interleaved transfers
   - omap-dma support for memcpy

  Others:
   - Constify platform_device_id
   - mv_xor fixes and improvements"

* tag 'dmaengine-4.2-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (46 commits)
  dmaengine: xgene: fix file permission
  dmaengine: fsl-edma: clear pending interrupts on initialization
  dmaengine: xdmac: Add memset support
  Documentation: dmaengine: document DMA_CTRL_ACK
  dmaengine: virt-dma: don't always free descriptor upon completion
  dmaengine: Revert "drivers/dma: remove unused support for MEMSET operations"
  dmaengine: hdmac: Implement interleaved transfers
  dmaengine: Move icg helpers to global header
  dmaengine: mv_xor: improve descriptors list handling and reduce locking
  dmaengine: mv_xor: Enlarge descriptor pool size
  dmaengine: mv_xor: add support for a38x command in descriptor mode
  dmaengine: mv_xor: Rename function for consistent naming
  dmaengine: mv_xor: bug fix for racing condition in descriptors cleanup
  dmaengine: pl330: fix wording in mcbufsz message
  dmaengine: sirf: add CSRatlas7 SoC support
  dmaengine: xgene-dma: Fix "incorrect type in assignement" warnings
  dmaengine: fix kernel-doc documentation
  dmaengine: pxa_dma: add support for legacy transition
  dmaengine: pxa_dma: add debug information
  dmaengine: pxa: add pxa dmaengine driver
  ...

There is NULL pointer dereference possible during statistics update if the route
used for OOTB responce is removed at unfortunate time. If the route exists when
we receive OOTB packet and we finally jump into sctp_packet_transmit() to send
ABORT, but in the meantime route is removed under our feet, we take "no_route"
path and try to update stats with IP_INC_STATS(sock_net(asoc->base.sk), ...).

But sctp_ootb_pkt_new() used to prepare responce packet doesn't call
sctp_transport_set_owner() and therefore there is no asoc associated with this
packet. Probably temporary asoc just for OOTB responces is overkill, so just
introduce a check like in all other places in sctp_packet_transmit(), where
"asoc" is dereferenced.

To reproduce this, one needs to
0. ensure that sctp module is loaded (otherwise ABORT is not generated)
1. remove default route on the machine
2. while true; do
     ip route del [interface-specific route]
     ip route add [interface-specific route]
   done
3. send enough OOTB packets (i.e. HB REQs) from another host to trigger ABORT
   responce

On x86_64 the crash looks like this:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp]
PGD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: ...
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G           O    4.0.5-1-ARCH #1
Hardware name: ...
task: ffffffff818124c0 ti: ffffffff81800000 task.ti: ffffffff81800000
RIP: 0010:[<ffffffffa05ec9ac>]  [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp]
RSP: 0018:ffff880127c037b8  EFLAGS: 00010296
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00000015ff66b480
RDX: 00000015ff66b400 RSI: ffff880127c17200 RDI: ffff880123403700
RBP: ffff880127c03888 R08: 0000000000017200 R09: ffffffff814625af
R10: ffffea00047e4680 R11: 00000000ffffff80 R12: ffff8800b0d38a28
R13: ffff8800b0d38a28 R14: ffff8800b3e88000 R15: ffffffffa05f24e0
FS:  0000000000000000(0000) GS:ffff880127c00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000000000000020 CR3: 00000000c855b000 CR4: 00000000000007f0
Stack:
 ffff880127c03910 ffff8800b0d38a28 ffffffff8189d240 ffff88011f91b400
 ffff880127c03828 ffffffffa05c94c5 0000000000000000 ffff8800baa1c520
 0000000000000000 0000000000000001 0000000000000000 0000000000000000
Call Trace:
 <IRQ>
 [<ffffffffa05c94c5>] ? sctp_sf_tabort_8_4_8.isra.20+0x85/0x140 [sctp]
 [<ffffffffa05d6b42>] ? sctp_transport_put+0x52/0x80 [sctp]
 [<ffffffffa05d0bfc>] sctp_do_sm+0xb8c/0x19a0 [sctp]
 [<ffffffff810b0e00>] ? trigger_load_balance+0x90/0x210
 [<ffffffff810e0329>] ? update_process_times+0x59/0x60
 [<ffffffff812c7a40>] ? timerqueue_add+0x60/0xb0
 [<ffffffff810e0549>] ? enqueue_hrtimer+0x29/0xa0
 [<ffffffff8101f599>] ? read_tsc+0x9/0x10
 [<ffffffff8116d4b5>] ? put_page+0x55/0x60
 [<ffffffff810ee1ad>] ? clockevents_program_event+0x6d/0x100
 [<ffffffff81462b68>] ? skb_free_head+0x58/0x80
 [<ffffffffa029a10b>] ? chksum_update+0x1b/0x27 [crc32c_generic]
 [<ffffffff81283f3e>] ? crypto_shash_update+0xce/0xf0
 [<ffffffffa05d3993>] sctp_endpoint_bh_rcv+0x113/0x280 [sctp]
 [<ffffffffa05dd4e6>] sctp_inq_push+0x46/0x60 [sctp]
 [<ffffffffa05ed7a0>] sctp_rcv+0x880/0x910 [sctp]
 [<ffffffffa05ecb50>] ? sctp_packet_transmit_chunk+0xb0/0xb0 [sctp]
 [<ffffffffa05ecb70>] ? sctp_csum_update+0x20/0x20 [sctp]
 [<ffffffff814b05a5>] ? ip_route_input_noref+0x235/0xd30
 [<ffffffff81051d6b>] ? ack_ioapic_level+0x7b/0x150
 [<ffffffff814b27be>] ip_local_deliver_finish+0xae/0x210
 [<ffffffff814b2e15>] ip_local_deliver+0x35/0x90
 [<ffffffff814b2a15>] ip_rcv_finish+0xf5/0x370
 [<ffffffff814b3128>] ip_rcv+0x2b8/0x3a0
 [<ffffffff81474193>] __netif_receive_skb_core+0x763/0xa50
 [<ffffffff81476c28>] __netif_receive_skb+0x18/0x60
 [<ffffffff81476cb0>] netif_receive_skb_internal+0x40/0xd0
 [<ffffffff814776c8>] napi_gro_receive+0xe8/0x120
 [<ffffffffa03946aa>] rtl8169_poll+0x2da/0x660 [r8169]
 [<ffffffff8147896a>] net_rx_action+0x21a/0x360
 [<ffffffff81078dc1>] __do_softirq+0xe1/0x2d0
 [<ffffffff8107912d>] irq_exit+0xad/0xb0
 [<ffffffff8157d158>] do_IRQ+0x58/0xf0
 [<ffffffff8157b06d>] common_interrupt+0x6d/0x6d
 <EOI>
 [<ffffffff810e1218>] ? hrtimer_start+0x18/0x20
 [<ffffffffa05d65f9>] ? sctp_transport_destroy_rcu+0x29/0x30 [sctp]
 [<ffffffff81020c50>] ? mwait_idle+0x60/0xa0
 [<ffffffff810216ef>] arch_cpu_idle+0xf/0x20
 [<ffffffff810b731c>] cpu_startup_entry+0x3ec/0x480
 [<ffffffff8156b365>] rest_init+0x85/0x90
 [<ffffffff818eb035>] start_kernel+0x48b/0x4ac
 [<ffffffff818ea120>] ? early_idt_handlers+0x120/0x120
 [<ffffffff818ea339>] x86_64_start_reservations+0x2a/0x2c
 [<ffffffff818ea49c>] x86_64_start_kernel+0x161/0x184
Code: 90 48 8b 80 b8 00 00 00 48 89 85 70 ff ff ff 48 83 bd 70 ff ff ff 00 0f 85 cd fa ff ff 48 89 df 31 db e8 18 63 e7 e0 48 8b 45 80 <48> 8b 40 20 48 8b 40 30 48 8b 80 68 01 00 00 65 48 ff 40 78 e9
RIP  [<ffffffffa05ec9ac>] sctp_packet_transmit+0x63c/0x730 [sctp]
 RSP <ffff880127c037b8>
CR2: 0000000000000020
---[ end trace 5aec7fd2dc983574 ]---
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0x0 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffff9fffffff)
drm_kms_helper: panic occurred, switching back to text console
---[ end Kernel panic - not syncing: Fatal exception in interrupt
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Vlad Yasevich <vyasevich@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The vfree() function performs also input parameter validation.
Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Bump up the driver version number to reflect the changes done to
work with vmxnet3 adapter version 2
Signed-off-by: Shreyas N Bhatewara <sbhatewara@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When allocating Rx related buffers, alloc_pages is called using an order
number that is decreased until successful. A system under stress can
experience failures during this allocation process resulting in a warning
being issued. This message can be of concern to end users even though the
failure is not fatal. Since the failure is not fatal and can occur
multiple times, the driver should include the __GFP_NOWARN flag to
suppress the warning message from being issued.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull ia64 updates from Tony Luck:
 "Pair of ia64 cleanups"

* tag 'please-pull-misc-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  ia64: Use setup_timer
  ia64: export flush_icache_range for module use

Merge tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "This update adds two new test suites: futex and seccomp.

  In addition, it includes fixes for bugs in timers, other tests, and
  compile framework.  It introduces new quicktest feature to enable
  users to choose to run tests that complete in a short time"

* tag 'linux-kselftest-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: add quicktest support
  selftests: add seccomp suite
  selftest, x86: fix incorrect comment
  tools selftests: Fix 'clean' target with make 3.81
  selftests/futex: Add .gitignore
  kselftest: Add exit code defines
  selftests: Add futex tests to the top-level Makefile
  selftests/futex: Increment ksft pass and fail counters
  selftests/futex: Update Makefile to use lib.mk
  selftests: Add futex functional tests
  kselftests: timers: Check _ALARM clockids are supported before suspending
  kselftests: timers: Ease alarmtimer-suspend unreasonable latency value
  kselftests: timers: Increase delay between suspends in alarmtimer-suspend
  selftests/exec: do not install subdir as it is already created
  selftests/ftrace: install test.d
  selftests: copy TEST_DIRS to INSTALL_PATH
  Test compaction of mlocked memory
  selftests/mount: output WARN messages when mount test skipped
  selftests/timers: Make git ignore all binaries in timers test suite