Skip to content

L
linux
Switch branch/tag
  1. 28 Aug, 2017 1 commit
  3. 26 Aug, 2017 18 commits
  5. 25 Aug, 2017 21 commits
    • Sudheer Mogilappagari's avatar
      i40e: synchronize nvmupdate command and adminq subtask · 2bf01935
      Sudheer Mogilappagari authored 
      During NVM update, state machine gets into unrecoverable state because
i40e_clean_adminq_subtask can get scheduled after the admin queue
command but before other state variables are updated. This causes
incorrect input to i40e_nvmupd_check_wait_event and state transitions
don't happen.

This issue existed before but surfaced after commit 373149fc
("i40e: Decrease the scope of rtnl lock")

This fix adds locking around admin queue command and update of
state variables so that adminq_subtask will have accurate information
whenever it gets scheduled.
Signed-off-by: default avatarSudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      2bf01935
    • Alan Brady's avatar
      i40e: prevent changing ITR if adaptive-rx/tx enabled · 06b2decd
      Alan Brady authored 
      Currently the driver allows the user to change (or even disable)
interrupt moderation if adaptive-rx/tx is enabled when this should
not be the case.

Adaptive RX/TX will not respect the user's ITR settings so
allowing the user to change it is weird.  This bug would also
allow the user to disable interrupt moderation with adaptive-rx/tx
enabled which doesn't make much sense either.

This patch makes it such that if adaptive-rx/tx is enabled, the user
cannot make any manual adjustments to interrupt moderation.  It also
makes it so that if ITR is disabled but adaptive-rx/tx is then
enabled, ITR will be re-enabled.
Signed-off-by: default avatarAlan Brady <alan.brady@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      06b2decd
    • Jacob Keller's avatar
      i40e: use cpumask_copy instead of direct assignment · 7e4d01e7
      Jacob Keller authored 
      According to the header file cpumask.h, we shouldn't be directly copying
a cpumask_t, since its a bitmap and might not be copied correctly. Lets
use the provided cpumask_copy() function instead.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      7e4d01e7
    • Alan Brady's avatar
      i40evf: use netdev variable in reset task · f0db7892
      Alan Brady authored 
      If we're going to bother initializing a variable to reference it we might
as well use it.
Signed-off-by: default avatarAlan Brady <alan.brady@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      f0db7892
    • Stefan Assmann's avatar
      i40e/i40evf: rename vf_offload_flags to vf_cap_flags in struct virtchnl_vf_resource · fbb113f7
      Stefan Assmann authored 
      The current name of vf_offload_flags indicates that the bitmap is
limited to offload related features. Make this more generic by renaming
it to vf_cap_flags, which allows for other capabilities besides
offloading to be added.
Signed-off-by: default avatarStefan Assmann <sassmann@kpanic.de>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      fbb113f7
    • Jacob Keller's avatar
      i40e: move check for avoiding VID=0 filters into i40e_vsi_add_vlan · fcf6cfc8
      Jacob Keller authored 
      In i40e_vsi_add_vlan we treat attempting to add VID=0 as an error,
because it does not do what the caller might expect. We already special
case VID=0 in i40e_vlan_rx_add_vid so that we avoid this error when
adding the VLAN.

This special casing is necessary so that we do not add the VLAN=0 filter
since we don't want to stop receiving untagged traffic. Unfortunately,
not all callers of i40e_vsi_add_vlan are aware of this, including when
we add VLANs from a VF device.

Rather than special casing every single caller of i40e_vsi_add_vlan,
lets just move this check internally. This makes the code simpler
because the caller does not need to be aware of how VLAN=0 is special,
and we don't forget to add this check in new places.

This fixes a harmless error message displaying when adding a VLAN from
within a VF. The message was meaningless but there is no reason to
confuse end users and system administrators, and this is now avoided.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      fcf6cfc8
    • Jacob Keller's avatar
      i40e/i40evf: use cmpxchg64 when updating private flags in ethtool · 841c950d
      Jacob Keller authored 
      When a user gives an invalid command to change a private flag which is
not supported, either because it is read-only, or the device is not
capable of the feature, we simply ignore the request.

A naive solution would simply be to report error codes when one of the
flags was not supported. However, this causes problems because it makes
the operation not atomic. If a user requests multiple private flags
together at once we could end up changing one before failing at the
second flag.

We can do a bit better if we instead update a temporary copy of the
flags variable in the loop, and then copy it into place after. If we
aren't careful this has the pitfall of potentially silently overwriting
any changes caused by other threads.

Avoid this by using cmpxchg64 which will compare and swap the flags
variable only if it currently matched the old value. We'll report
-EAGAIN in the (hopefully rare!) case where the cmpxchg64 fails.

This ensures that we can properly report when flags are not supported in
an atomic fashion without the risk of overwriting other threads changes.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      841c950d
    • Anjali Singhai Jain's avatar
      i40e: Detect ATR HW Evict NVM issue and disable the feature · 10a955ff
      Anjali Singhai Jain authored 
      This patch fixes a problem with the HW ATR eviction feature where the
NVM setting was incorrect.  This patch detects the issue on X720
adapters and disables the feature if the NVM setting is incorrect.

Without this patch, HW ATR Evict feature does not work on broken NVMs
and is not detected either.  If the HW ATR Evict feature is disabled
the SW Eviction feature will take effect.
Signed-off-by: default avatarAnjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: default avatarAlice Michael <alice.michael@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      10a955ff
    • Jacob Keller's avatar
      i40e: remove workaround for Open Firmware MAC address · 28921a0c
      Jacob Keller authored 
      Since commit b499ffb0 ("i40e: Look up MAC address in Open Firmware
or IDPROM"), we've had support for obtaining the MAC address
form Open Firmware or IDPROM.

This code relied on sending the Open Firmware address directly to the
device firmware instead of relying on our MAC/VLAN filter list. Thus,
a work around was introduced in commit b1b15df5 ("i40e: Explicitly
write platform-specific mac address after PF reset")

We refactored the Open Firmware address enablement code in the ill-named
commit 41c4c2b5 ("i40e: allow look-up of MAC address from Open
Firmware or IDPROM")

Since this refactor, we no longer even set I40E_FLAG_PF_MAC. Further, we
don't need this work around, because we actually store the MAC address
as part of the MAC/VLAN filter hash. Thus, we will restore the address
correctly upon reset.

The refactor above failed to revert the workaround, so do that now.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      28921a0c
    • Jacob Keller's avatar
      i40e: separate hw_features from runtime changing flags · d36e41dc
      Jacob Keller authored 
      The number of flags found in pf->flags has grown quite large, and there
are a lot of different types of flags. Most of the flags are simply
hardware features which are enabled on some firmware or some MAC types.
Other flags are dynamic run-time flags which enable or disable certain
features of the driver.

Separate these two types of flags into pf->hw_features and pf->flags.
The hw_features list will contain a set of features which are enabled at
init time. This will not contain toggles or otherwise dynamically
changing features. These flags should not need atomic protections, as
they will be set once during init and then be essentially read only.

Everything else will remain in the flags variable. These flags may be
modified at any time during run time. A future patch may wish to convert
these flags into set_bit/clear_bit/test_bit or similar approach to
ensure atomic correctness.

The I40E_FLAG_MFP_ENABLED flag may be a good fit for hw_features but
currently is used by ethtool in the private flags settings, and thus has
been left as part of flags.

Additionally, I40E_FLAG_DCB_CAPABLE may be a good fit for the
hw_features but this patch has not tried to untangle it yet.
Signed-off-by: default avatarJacob Keller <jacob.e.keller@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      d36e41dc
    • Anjali Singhai Jain's avatar
      i40e: Fix a bug with VMDq RSS queue allocation · 5a433199
      Anjali Singhai Jain authored 
      The X722 pf flag setup should happen before the VMDq RSS queue count is
initialized for VMDq VSI to get the right number of queues for RSS in
case of X722 devices.
Signed-off-by: default avatarAnjali Singhai Jain <anjali.singhai@intel.com>
Signed-off-by: default avatarAlice Michael <alice.michael@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      5a433199
    • Sudheer Mogilappagari's avatar
      i40evf: prevent VF close returning before state transitions to DOWN · fe2647ab
      Sudheer Mogilappagari authored 
      Currently i40evf_close() can return before state transitions to
__I40EVF_DOWN because of the latency involved in processing and
receiving response from PF driver and scheduling of VF watchdog_task.
Due to this inconsistency an immediate call to i40evf_open() fails
because state is still DOWN_PENDING.

When a VF interface is in up state and we try to add it as slave,
The bonding driver calls dev_close() and dev_open() in short duration
resulting in dev_open returning error. The ifenslave command needs
to be run again for dev_open to succeed.

This fix ensures that watchdog timer is scheduled immediately after
admin queue operations are scheduled in i40evf_down(). In addition a
wait condition is added at the end of i40evf_close so that function
wont return when state is still DOWN_PENDING. The timeout value is
chosen after some profiling and includes some buffer.
Signed-off-by: default avatarSudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      fe2647ab
    • Mitch Williams's avatar
      i40e/i40evf: adjust packet size to account for double VLANs · 1e3a5fd5
      Mitch Williams authored 
      Now that the kernel supports double VLAN tags, we should at least play
nice. Adjust the max packet size to account for two VLAN tags, not just
one.
Signed-off-by: default avatarMitch Williams <mitch.a.williams@intel.com>
Tested-by: default avatarAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
      1e3a5fd5
    • Eric Biggers's avatar
      strparser: initialize all callbacks · 3fd87127
      Eric Biggers authored 
      commit bbb03029 ("strparser: Generalize strparser") added more
function pointers to 'struct strp_callbacks'; however, kcm_attach() was
not updated to initialize them.  This could cause the ->lock() and/or
->unlock() function pointers to be set to garbage values, causing a
crash in strp_work().

Fix the bug by moving the callback structs into static memory, so
unspecified members are zeroed.  Also constify them while we're at it.

This bug was found by syzkaller, which encountered the following splat:

    IP: 0x55
    PGD 3b1ca067
    P4D 3b1ca067
    PUD 3b12f067
    PMD 0

    Oops: 0010 [#1] SMP KASAN
    Dumping ftrace buffer:
       (ftrace buffer empty)
    Modules linked in:
    CPU: 2 PID: 1194 Comm: kworker/u8:1 Not tainted 4.13.0-rc4-next-20170811 #2
    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
    Workqueue: kstrp strp_work
    task: ffff88006bb0e480 task.stack: ffff88006bb10000
    RIP: 0010:0x55
    RSP: 0018:ffff88006bb17540 EFLAGS: 00010246
    RAX: dffffc0000000000 RBX: ffff88006ce4bd60 RCX: 0000000000000000
    RDX: 1ffff1000d9c97bd RSI: 0000000000000000 RDI: ffff88006ce4bc48
    RBP: ffff88006bb17558 R08: ffffffff81467ab2 R09: 0000000000000000
    R10: ffff88006bb17438 R11: ffff88006bb17940 R12: ffff88006ce4bc48
    R13: ffff88003c683018 R14: ffff88006bb17980 R15: ffff88003c683000
    FS:  0000000000000000(0000) GS:ffff88006de00000(0000) knlGS:0000000000000000
    CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    CR2: 0000000000000055 CR3: 000000003c145000 CR4: 00000000000006e0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
    Call Trace:
     process_one_work+0xbf3/0x1bc0 kernel/workqueue.c:2098
     worker_thread+0x223/0x1860 kernel/workqueue.c:2233
     kthread+0x35e/0x430 kernel/kthread.c:231
     ret_from_fork+0x2a/0x40 arch/x86/entry/entry_64.S:431
    Code:  Bad RIP value.
    RIP: 0x55 RSP: ffff88006bb17540
    CR2: 0000000000000055
    ---[ end trace f0e4920047069cee ]---

Here is a C reproducer (requires CONFIG_BPF_SYSCALL=y and
CONFIG_AF_KCM=y):

    #include <linux/bpf.h>
    #include <linux/kcm.h>
    #include <linux/types.h>
    #include <stdint.h>
    #include <sys/ioctl.h>
    #include <sys/socket.h>
    #include <sys/syscall.h>
    #include <unistd.h>

    static const struct bpf_insn bpf_insns[3] = {
        { .code = 0xb7 }, /* BPF_MOV64_IMM(0, 0) */
        { .code = 0x95 }, /* BPF_EXIT_INSN() */
    };

    static const union bpf_attr bpf_attr = {
        .prog_type = 1,
        .insn_cnt = 2,
        .insns = (uintptr_t)&bpf_insns,
        .license = (uintptr_t)"",
    };

    int main(void)
    {
        int bpf_fd = syscall(__NR_bpf, BPF_PROG_LOAD,
                             &bpf_attr, sizeof(bpf_attr));
        int inet_fd = socket(AF_INET, SOCK_STREAM, 0);
        int kcm_fd = socket(AF_KCM, SOCK_DGRAM, 0);

        ioctl(kcm_fd, SIOCKCMATTACH,
              &(struct kcm_attach) { .fd = inet_fd, .bpf_fd = bpf_fd });
    }

Fixes: bbb03029 ("strparser: Generalize strparser")
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@quantonium.net>
Signed-off-by: default avatarEric Biggers <ebiggers@google.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3fd87127
    • Haiyang Zhang's avatar
      hv_netvsc: Fix rndis_filter_close error during netvsc_remove · c6f71c41
      Haiyang Zhang authored 
      We now remove rndis filter before unregister_netdev(), which calls
device close. It involves closing rndis filter already removed.

This patch fixes this error.
Signed-off-by: default avatarHaiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      c6f71c41
    • David S. Miller's avatar
      Merge tag 'mlx5-updates-2017-08-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux · 0cf3f4c3
      David S. Miller authored 
      Saeed Mahameed says:

====================
mlx5-updates-2017-08-24

This series includes updates to mlx5 core driver.

From Gal and Saeed, three cleanup patches.
From Matan, Low level flow steering improvements and optimizations,
 - Use more efficient data structures for flow steering objects handling.
 - Add tracepoints to flow steering operations.
 - Overall these patches improve flow steering rule insertion rate by a
   factor of seven in large scales (~50K rules or more).

====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      0cf3f4c3
    • Dan Carpenter's avatar
      hinic: uninitialized variable in hinic_api_cmd_init() · 256fbe11
      Dan Carpenter authored 
      We never set the error code in this function.

Fixes: eabf0fad ("net-next/hinic: Initialize api cmd resources")
Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      256fbe11
    • Florian Fainelli's avatar
      net: mv643xx_eth: Be drop monitor friendly · 43cee2d2
      Florian Fainelli authored 
      txq_reclaim() does the normal transmit queue reclamation and
rxq_deinit() does the RX ring cleanup, none of these are packet drops,
so use dev_consume_skb() for both locations.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      43cee2d2
    • Florian Fainelli's avatar
      tg3: Be drop monitor friendly · 1e9d8e7a
      Florian Fainelli authored 
      tg3_tx() does the normal packet TX completion,
tigon3_dma_hwbug_workaround() and tg3_tso_bug() both need to allocate a
new SKB that is suitable to workaround HW bugs, and finally
tg3_free_rings() is doing ring cleanup. Use dev_consume_skb_any() for
these 3 locations to be SKB drop monitor friendly.
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
Acked-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      1e9d8e7a
    • David S. Miller's avatar
      Merge branch 'ipv6-Route-ICMPv6-errors-with-the-flow-when-ECMP-in-use' · 45c7ec9d
      David S. Miller authored 
      Jakub Sitnicki says:

====================
ipv6: Route ICMPv6 errors with the flow when ECMP in use

This patch set is another take at making Path MTU Discovery work when
server nodes are behind a router employing multipath routing in a
load-balance or anycast setup (that is, when not every end-node can be
reached by every path). The problem has been well described in RFC 7690
[1], but in short - in such setups ICMPv6 PTB errors are not guaranteed
to be routed back to the server node that sent a reply that exceeds path
MTU.

The proposed solution is two-fold:

 (1) on the server side - reflect the Flow Label [2]. This can be done
     without modifying the application using a new per-netns sysctl knob
     that has been proposed independently of this patchset in the patch
     entitled "ipv6: Add sysctl for per namespace flow label
     reflection" [3].

 (2) on the ECMP router - make the ipv6 routing subsystem look into the
     ICMPv6 error packets and compute the flow-hash from its payload,
     i.e. the offending packet that triggered the error. This is the
     same behavior as ipv4 stack has already.

With both parts in place Path MTU Discovery can work past the ECMP
router when using IPv6.

[1] https://tools.ietf.org/html/rfc7690
[2] https://tools.ietf.org/html/draft-wang-6man-flow-label-reflection-01
[3] http://patchwork.ozlabs.org/patch/804870/

v1 -> v2:
 - don't use "extern" in external function declaration in header file
 - style change, put as many arguments as possible on the first line of
   a function call, and align consecutive lines to the first argument
 - expand the cover letter based on the feedback

v2 -> v3:
 - switch to computing flow-hash using flow dissector to align with
   recent changes to multipath routing in ipv4 stack
 - add a sysctl knob for enabling flow label reflection per netns

---

Testing has covered multipath routing of ICMPv6 PTB errors in forward
and local output path in a simple use-case of an HTTP server sending a
reply which is over the path MTU size [3]. I have also checked if the
flows get evenly spread over multiple paths (i.e. if there are no
regressions) [4].

[3] https://github.com/jsitnicki/tools/tree/master/net/tests/ecmp/pmtud
[4] https://github.com/jsitnicki/tools/tree/master/net/tests/ecmp/load-balance
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      45c7ec9d
    • Jakub Sitnicki's avatar
      ipv6: Use multipath hash from flow info if available · b673d6cc
      Jakub Sitnicki authored 
      Allow our callers to influence the choice of ECMP link by honoring the
hash passed together with the flow info. This allows for special
treatment of ICMP errors which we would like to route over the same path
as the IPv6 datagram that triggered the error.

Also go through rt6_multipath_hash(), in the usual case when we aren't
dealing with an ICMP error, so that there is one central place where
multipath hash is computed.
Signed-off-by: default avatarJakub Sitnicki <jkbs@redhat.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b673d6cc
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7