Pull probe_kernel_read() uses from Al Viro:
 "Several open-coded probe_kernel_read()..."

* 'work.probe_kernel_read' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  dio: use probe_kernel_read()
  hp_sdc: use probe_kernel_read()
  hpfb: use probe_kernel_read()

Pull alpha user access updates from Al Viro:
 "Several alpha osf_sys.c uaccess cleanups - getdomainname() had insane
  byte-by-byte copying of string to userland (instead of strnlen +
  copy_to_user) plus yet another compat variant of timeval/itimerval
  with associated copyin/copyout primitives"

* 'misc.alpha' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  osf_sigstack(): switch to put_user()
  osf_sys.c: switch handling of timeval32/itimerval32 to copy_{to,from}_user()
  osf_getdomainname(): use copy_to_user()

Pull misc compat stuff updates from Al Viro:
 "This part is basically untangling various compat stuff. Compat
  syscalls moved to their native counterparts, getting rid of quite a
  bit of double-copying and/or set_fs() uses. A lot of field-by-field
  copyin/copyout killed off.

   - kernel/compat.c is much closer to containing just the
     copyin/copyout of compat structs. Not all compat syscalls are gone
     from it yet, but it's getting there.

   - ipc/compat_mq.c killed off completely.

   - block/compat_ioctl.c cleaned up; floppy compat ioctls moved to
     drivers/block/floppy.c where they belong. Yes, there are several
     drivers that implement some of the same ioctls. Some are m68k and
     one is 32bit-only pmac. drivers/block/floppy.c is the only one in
     that bunch that can be built on biarch"

* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  mqueue: move compat syscalls to native ones
  usbdevfs: get rid of field-by-field copyin
  compat_hdio_ioctl: get rid of set_fs()
  take floppy compat ioctls to sodding floppy.c
  ipmi: get rid of field-by-field __get_user()
  ipmi: get COMPAT_IPMICTL_RECEIVE_MSG in sync with the native one
  rt_sigtimedwait(): move compat to native
  select: switch compat_{get,put}_fd_set() to compat_{get,put}_bitmap()
  put_compat_rusage(): switch to copy_to_user()
  sigpending(): move compat to native
  getrlimit()/setrlimit(): move compat to native
  times(2): move compat to native
  compat_{get,put}_bitmap(): use unsafe_{get,put}_user()
  fb_get_fscreeninfo(): don't bother with do_fb_ioctl()
  do_sigaltstack(): lift copying to/from userland into callers
  take compat_sys_old_getrlimit() to native syscall
  trim __ARCH_WANT_SYS_OLD_GETRLIMIT

Pull DRM compat ioctl handling updates from Al Viro:
 "This kills the double-copies in there and tons of field-by-field
  copyin/copyout.

  Several dead ioctls put to rest, while we are at it - the native
  counterparts had been gone for a decade, so we can bloody well fail
  early on the compat side. No point rearranging the 32bit structure
  into 64bit one (and back) only to be told "piss off, I don't know that
  ioctl" by the native code..."

* 'work.drm' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (29 commits)
  Fix trivial misannotations
  mga: switch compat ioctls to drm_ioctl_kernel()
  radeon: take out dead compat ioctls
  drm compat: ia64 is not biarch
  drm_compat_ioctl(): tidy up a bit
  switch compat_drm_mapbufs() to drm_ioctl_kernel()
  switch compat_drm_rmmap() to drm_ioctl_kernel()
  switch compat_drm_mode_addfb2() to drm_ioctl_kernel()
  switch compat_drm_wait_vblank() to drm_ioctl_kernel()
  switch compat_drm_update_draw()
  compat_drm: switch sg ioctls
  compat_drm: switch AGP compat ioctls to drm_ioctl_kernel()
  switch compat_drm_dma() to drm_ioctl_kernel()
  switch compat_drm_resctx() to drm_ioctl_kernel()
  switch compat_drm_getsareactx() to drm_ioctl_kernel()
  switch compat_drm_setsareactx() to drm_ioctl_kernel()
  switch compat_drm_freebufs() to drm_ioctl_kernel()
  switch compat_drm_markbufs() to drm_ioctl_kernel()
  switch compat_drm_addmap() to drm_ioctl_kernel()
  switch compat_drm_getstats() to drm_ioctl_kernel()
  ...

Pull tracing updates from Steven Rostedt:
 "The new features of this release:

   - Added TRACE_DEFINE_SIZEOF() which allows trace events that use
     sizeof() it the TP_printk() to be converted to the actual size such
     that trace-cmd and perf can parse them correctly.

   - Some rework of the TRACE_DEFINE_ENUM() such that the above
     TRACE_DEFINE_SIZEOF() could reuse the same code.

   - Recording of tgid (Thread Group ID). This is similar to how task
     COMMs are recorded (cached at sched_switch), where it is in a table
     and used on output of the trace and trace_pipe files.

   - Have ":mod:<module>" be cached when written into set_ftrace_filter.
     Then the functions of the module will be traced at module load.

   - Some random clean ups and small fixes"

* tag 'trace-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (26 commits)
  ftrace: Test for NULL iter->tr in regex for stack_trace_filter changes
  ftrace: Decrement count for dyn_ftrace_total_info for init functions
  ftrace: Unlock hash mutex on failed allocation in process_mod_list()
  tracing: Add support for display of tgid in trace output
  tracing: Add support for recording tgid of tasks
  ftrace: Decrement count for dyn_ftrace_total_info file
  ftrace: Remove unused function ftrace_arch_read_dyn_info()
  sh/ftrace: Remove only user of ftrace_arch_read_dyn_info()
  ftrace: Have cached module filters be an active filter
  ftrace: Implement cached modules tracing on module load
  ftrace: Have the cached module list show in set_ftrace_filter
  ftrace: Add :mod: caching infrastructure to trace_array
  tracing: Show address when function names are not found
  ftrace: Add missing comment for FTRACE_OPS_FL_RCU
  tracing: Rename update the enum_map file
  tracing: Add TRACE_DEFINE_SIZEOF() macros
  tracing: define TRACE_DEFINE_SIZEOF() macro to map sizeof's to their values
  tracing: Rename enum_replace to eval_replace
  trace: rename enum_map functions
  trace: rename trace.c enum functions
  ...

Pull dma-mapping infrastructure from Christoph Hellwig:
 "This is the first pull request for the new dma-mapping subsystem

  In this new subsystem we'll try to properly maintain all the generic
  code related to dma-mapping, and will further consolidate arch code
  into common helpers.

  This pull request contains:

   - removal of the DMA_ERROR_CODE macro, replacing it with calls to
     ->mapping_error so that the dma_map_ops instances are more self
     contained and can be shared across architectures (me)

   - removal of the ->set_dma_mask method, which duplicates the
     ->dma_capable one in terms of functionality, but requires more
     duplicate code.

   - various updates for the coherent dma pool and related arm code
     (Vladimir)

   - various smaller cleanups (me)"

* tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits)
  ARM: dma-mapping: Remove traces of NOMMU code
  ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus
  ARM: NOMMU: Introduce dma operations for noMMU
  drivers: dma-mapping: allow dma_common_mmap() for NOMMU
  drivers: dma-coherent: Introduce default DMA pool
  drivers: dma-coherent: Account dma_pfn_offset when used with device tree
  dma: Take into account dma_pfn_offset
  dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs
  dma-mapping: remove dmam_free_noncoherent
  crypto: qat - avoid an uninitialized variable warning
  au1100fb: remove a bogus dma_free_nonconsistent call
  MAINTAINERS: add entry for dma mapping helpers
  powerpc: merge __dma_set_mask into dma_set_mask
  dma-mapping: remove the set_dma_mask method
  powerpc/cell: use the dma_supported method for ops switching
  powerpc/cell: clean up fixed mapping dma_ops initialization
  tile: remove dma_supported and mapping_error methods
  xen-swiotlb: remove xen_swiotlb_set_dma_mask
  arm: implement ->dma_supported instead of ->set_dma_mask
  mips/loongson64: implement ->dma_supported instead of ->set_dma_mask
  ...

Pull more s390 updates from Martin Schwidefsky:

 - The fixup for the blk-mq clash with the scm driver

 - An improvement for the dasd driver in regard to raw I/O

 - Bug fixes and cleanup

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  Update my email address
  s390/syscalls: Fix out of bounds arguments access
  s390/vfio_ccw: remove unused variable
  s390/dasd: remove unneeded code
  s390/crash: Remove unused KEXEC_NOTE_BYTES
  s390/zcrypt: Fix missing newlines at some debug feature messages.
  s390/dasd: Make raw I/O usable without prefix support
  s390/dasd: Rename dasd_raw_build_cp()
  s390/dasd: Refactor prefix_LRE() and related functions
  s390: fix up for "blk-mq: switch ->queue_rq return value to blk_status_t"

Pull xen updates from Juergen Gross:
 "Other than fixes and cleanups it contains:

   - support > 32 VCPUs at domain restore

   - support for new sysfs nodes related to Xen

   - some performance tuning for Linux running as Xen guest"

* tag 'for-linus-4.13-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: allow userspace access during hypercalls
  x86: xen: remove unnecessary variable in xen_foreach_remap_area()
  xen: allocate page for shared info page from low memory
  xen: avoid deadlock in xenbus driver
  xen: add sysfs node for hypervisor build id
  xen: sync include/xen/interface/version.h
  xen: add sysfs node for guest type
  doc,xen: document hypervisor sysfs nodes for xen
  xen/vcpu: Handle xen_vcpu_setup() failure at boot
  xen/vcpu: Handle xen_vcpu_setup() failure in hotplug
  xen/pv: Fix OOPS on restore for a PV, !SMP domain
  xen/pvh*: Support > 32 VCPUs at domain restore
  xen/vcpu: Simplify xen_vcpu related code
  xen-evtchn: Bind dyn evtchn:qemu-dm interrupt to next online VCPU
  xen: avoid type warning in xchg_xen_ulong
  xen: fix HYPERVISOR_dm_op() prototype
  xen: don't print error message in case of missing Xenstore entry
  arm/xen: Adjust one function call together with a variable assignment
  arm/xen: Delete an error message for a failed memory allocation in __set_phys_to_machine_multi()
  arm/xen: Improve a size determination in __set_phys_to_machine_multi()

Pull KVM updates from Paolo Bonzini:
 "PPC:
   - Better machine check handling for HV KVM
   - Ability to support guests with threads=2, 4 or 8 on POWER9
   - Fix for a race that could cause delayed recognition of signals
   - Fix for a bug where POWER9 guests could sleep with interrupts pending.

  ARM:
   - VCPU request overhaul
   - allow timer and PMU to have their interrupt number selected from userspace
   - workaround for Cavium erratum 30115
   - handling of memory poisonning
   - the usual crop of fixes and cleanups

  s390:
   - initial machine check forwarding
   - migration support for the CMMA page hinting information
   - cleanups and fixes

  x86:
   - nested VMX bugfixes and improvements
   - more reliable NMI window detection on AMD
   - APIC timer optimizations

  Generic:
   - VCPU request overhaul + documentation of common code patterns
   - kvm_stat improvements"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (124 commits)
  Update my email address
  kvm: vmx: allow host to access guest MSR_IA32_BNDCFGS
  x86: kvm: mmu: use ept a/d in vmcs02 iff used in vmcs12
  kvm: x86: mmu: allow A/D bits to be disabled in an mmu
  x86: kvm: mmu: make spte mmio mask more explicit
  x86: kvm: mmu: dead code thanks to access tracking
  KVM: PPC: Book3S: Fix typo in XICS-on-XIVE state saving code
  KVM: PPC: Book3S HV: Close race with testing for signals on guest entry
  KVM: PPC: Book3S HV: Simplify dynamic micro-threading code
  KVM: x86: remove ignored type attribute
  KVM: LAPIC: Fix lapic timer injection delay
  KVM: lapic: reorganize restart_apic_timer
  KVM: lapic: reorganize start_hv_timer
  kvm: nVMX: Check memory operand to INVVPID
  KVM: s390: Inject machine check into the nested guest
  KVM: s390: Inject machine check into the guest
  tools/kvm_stat: add new interactive command 'b'
  tools/kvm_stat: add new command line switch '-i'
  tools/kvm_stat: fix error on interactive command 'g'
  KVM: SVM: suppress unnecessary NMI singlestep on GIF=0 and nested exit
  ...

Pull hwspinlock updates from Bjorn Andersson:
 "This introduces a driver for the Spreadtrum hardware spinlock device
  and cleans up the Kconfig file"

* tag 'hwlock-v4.13' of git://github.com/andersson/remoteproc:
  DT: hwspinlock: Add binding documentation for Spreadtrum hwspinlock
  hwspinlock: sprd: Add hardware spinlock driver
  Make HWSPINLOCK a menuconfig to ease disabling

Pull remoteproc updates from Bjorn Andersson:
 "This introduces the Keystone 2 DSP driver and refactors the start/stop
  code in recovery. The Davinci DSP driver gets a few fixes and the
  Kconfig gets cleaned up"

* tag 'rproc-v4.13' of git://github.com/andersson/remoteproc:
  remoteproc/keystone: Fix circular dependencies for ARM configs
  remoteproc: Drop redundant REMOTEPROC dependency from driver Kconfigs
  remoteproc: Drop VIRTUALIZATION dependency from REMOTEPROC
  remoteproc/keystone: Ensure the DSPs are in reset in probe
  remoteproc/keystone: Add a remoteproc driver for Keystone 2 DSPs
  dt-bindings: remoteproc: Add Keystone DSP remoteproc binding
  remoteproc/davinci: fix unbalanced reset between start and stop ops
  remoteproc/davinci: simplify the reset function
  remoteproc/davinci: Update Kconfig to depend on DMA_CMA
  remoteproc: fix spelling mistake: "Resouce" -> "Resource"
  remoteproc: Modify recovery path to use rproc_{start,stop}()
  remoteproc: Introduce rproc_{start,stop}() functions

Pull rpmsg updates from Bjorn Andersson:
 "This introduces the Qualcomm GLINK protocol driver and
  DeviceTree-based modalias support, as well as a number of smaller
  fixes"

* tag 'rpmsg-v4.13' of git://github.com/andersson/remoteproc:
  rpmsg: Make modalias work for DeviceTree based devices
  rpmsg: Drop VIRTUALIZATION dependency from RPMSG_VIRTIO
  rpmsg: Don't overwrite release op of rpdev
  rpmsg: virtio_rpmsg_bus: cleanup multiple assignment to ops
  rpmsg: virtio_rpmsg_bus: fix nameservice address
  rpmsg: cleanup incorrect function in dev_err message
  rpmsg: virtio_rpmsg_bus: fix announce for devices without endpoint
  rpmsg: Introduce Qualcomm RPM glink driver
  soc: qcom: Add device tree binding for GLINK RPM
  rpmsg: Release rpmsg devices in backends

Pull x86 platform driver updates from Darren Hart:
 "Introduce new bus architecture for WMI and expose BMOF data through
  sysfs. Correct several assumptions about WMI instance number from 1 to
  0. Further fujitsu-laptop cleanups, continuing to prepare for
  separation into two modules. Add support for several new ideapad
  laptops and silead-based tablets. Various minor fixes and const
  cleanups.

  Detail summary:

  sony-laptop:
   - constify attribute_group and input index array

  fujitsu-laptop:
   - rework debugging
   - do not evaluate ACPI _INI methods
   - do not update ACPI device power status
   - sanitize hotkey input device identification
   - use strcpy to set ACPI device names and classes
   - remove redundant safety checks
   - use device-specific data in remaining module code
   - use device-specific data in LED-related code
   - explicitly pass ACPI device to call_fext_func()
   - track the last instantiated FUJ02E3 ACPI device
   - allocate fujitsu_laptop in acpi_fujitsu_laptop_add()
   - use device-specific data in backlight code
   - allocate fujitsu_bl in acpi_fujitsu_bl_add()
   - distinguish current uses of device-specific data

  msi-laptop:
   - constify msipf*_attribute_group

  eeepc-laptop:
   - constify platform_attribute_group

  toshiba_haps:
   - constify haps_attr_group

  dell-wmi-led:
   - Adjust instance of wmi_evaluate_method calls to 0

  alienware-wmi:
   - Adjust instance of wmi_evaluate_method calls to 0

  intel_menlow:
   - Add const to thermal_cooling_device_ops structure

  acerhdf:
   - Add const to thermal_cooling_device_ops structure

  dell-laptop:
   - Fix bogus keyboard backlight sysfs interface

  acer-wmi:
   - Using zero as first WMI instance number
   - Detect RF Button capability

  ideapad-laptop:
   - Add Y720-15IKBN to no_hw_rfkill
   - Add Y520-15IKBN to no_hw_rfkill
   - constify rfkill_ops structure
   - Squelch ACPI event 1
   - hide unused 'touchpad_store'
   - Switch touchpad attribute to be RO
   - Add sysfs interface for touchpad state

  silead_dmi:
   - Add touchscreen info for PoV mobii wintab p800w
   - Add touchscreen info for Pipo W2S tablet
   - Add touchscreen info for GP-electronic T701

  dell-rbtn:
   - constify rfkill_ops structures
   - Improve explanation about DELLABC6

  samsung-laptop:
   - constify rfkill_ops structures

  panasonic-laptop:
   - remove unused code

  samsung-laptop:
   - Initialize loca variable

  dell-wmi:
   - Convert to the WMI bus infrastructure
   - Add a better description for "stealth mode"
   - Add a comment explaining the 0xb2 magic number

  wmi-bmof:
   - New driver to expose embedded Binary WMI MOF metadata

  wmi*:
   - Fix printing info about WDG structure
   - Add recent copyright statements
   - Require query for data blocks, rename writable to setable
   - Add an interface for subdrivers to access sibling devices
   - Bind the platform device, not the ACPI node
   - Add a new interface to read block data
   - Incorporate acpi_install_notify_handler
   - Instantiate all devices before adding them
   - Probe data objects for read and write capabilities
   - Split devices into types and add basic sysfs attributes
   - Fix error handling when creating devices
   - Turn WMI into a bus driver
   - Track wmi devices per ACPI device
   - Clean up acpi_wmi_add
   - Pass the acpi_device through to parse_wdg
   - Drop "Mapper (un)loaded" messages

  intel_cht_int33fe:
   - Set supplied-from property on max17047 dev

  intel_pmc_ipc:
   - Mark ipc_data_readb() as __maybe_unused

  topstar-laptop:
   - Add new device id

  peaq-wmi:
   - Add new peaq-wmi driver

  thinkpad_acpi:
   - Add a comment about 0 in module_param_call()
   - Join string literals back

  toshiba_acpi:
   - use memdup_user_nul"

* tag 'platform-drivers-x86-v4.13-1' of git://git.infradead.org/linux-platform-drivers-x86: (67 commits)
  platform/x86: sony-laptop: constify attribute_group and input index array
  platform/x86: fujitsu-laptop: rework debugging
  platform/x86: fujitsu-laptop: do not evaluate ACPI _INI methods
  platform/x86: fujitsu-laptop: do not update ACPI device power status
  platform/x86: fujitsu-laptop: sanitize hotkey input device identification
  platform/x86: fujitsu-laptop: use strcpy to set ACPI device names and classes
  platform/x86: fujitsu-laptop: remove redundant safety checks
  platform/x86: msi-laptop: constify msipf*_attribute_group
  platform/x86: eeepc-laptop: constify platform_attribute_group
  platform/x86: toshiba_haps: constify haps_attr_group
  platform/x86: dell-wmi-led: Adjust instance of wmi_evaluate_method calls to 0
  platform/x86: alienware-wmi: Adjust instance of wmi_evaluate_method calls to 0
  platform/x86: intel_menlow: Add const to thermal_cooling_device_ops structure
  platform/x86: acerhdf: Add const to thermal_cooling_device_ops structure
  platform/x86: dell-laptop: Fix bogus keyboard backlight sysfs interface
  platform/x86: acer-wmi: Using zero as first WMI instance number
  platform/x86: ideapad-laptop: Add Y720-15IKBN to no_hw_rfkill
  platform/x86: ideapad-laptop: Add Y520-15IKBN to no_hw_rfkill
  platform/x86: silead_dmi: Add touchscreen info for PoV mobii wintab p800w
  platform/x86: silead_dmi: Add touchscreen info for Pipo W2S tablet
  ...

Pull SCSI updates from James Bottomley:
 "This is mostly updates of the usual suspects: lpfc, qla2xxx, bnx2fc,
  qedf, hpsa, hisi_sas, smartpqi, cxlflash, aacraid, csiostor along with
  a host of minor and miscellaneous changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (276 commits)
  qla2xxx: Fix NVMe entry_type for iocb packet on BE system
  scsi: qla2xxx: avoid unused-function warning
  scsi: snic: fix a couple of spelling mistakes/typos
  scsi: qla2xxx: fix a bunch of typos and spelling mistakes
  scsi: lpfc: don't double count abort errors
  scsi: lpfc: spin_lock_irq() is not nestable
  scsi: hisi_sas: optimise DMA slot memory
  scsi: ibmvfc: constify dev_pm_ops structures.
  scsi: ibmvscsi: constify dev_pm_ops structures.
  scsi: cxlflash: Update debug prints in reset handlers
  scsi: cxlflash: Update send_tmf() parameters
  scsi: cxlflash: Avoid double free of character device
  scsi: Add STARGET_CREATED_REMOVE state to scsi_target_state
  scsi: ses: do not add a device to an enclosure if enclosure_add_links() fails.
  scsi: ufs: flush eh_work when eh_work scheduled.
  scsi: qla2xxx: Protect access to qpair members with qpair->qp_lock
  scsi: sun_esp: fix device reference leaks
  scsi: fnic: changing queue command to return result DID_IMM_RETRY when rport is init
  scsi: fnic: correct speed display and add support for 25,40 and 100G
  scsi: fnic: added timestamp reporting in fnic debug stats
  ...

Merge tag 'for-4.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Add the ability to use select or poll /dev/mapper/control to wait for
   events from multiple DM devices.

 - Convert DM's printk macros over to using pr_<level> macros.

 - Add a big-endian variant of plain64 IV to dm-crypt.

 - Add support for zoned (aka SMR) devices to DM core. DM kcopyd was
   also improved to provide a sequential write feature needed by zoned
   devices.

 - Introduce DM zoned target that provides support for host-managed
   zoned devices, the result dm-zoned device acts as a drive-managed
   interface to the underlying host-managed device.

 - A DM raid fix to avoid using BUG() for error handling.

* tag 'for-4.13/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm zoned: fix overflow when converting zone ID to sectors
  dm raid: stop using BUG() in __rdev_sectors()
  dm zoned: drive-managed zoned block device target
  dm kcopyd: add sequential write feature
  dm linear: add support for zoned block devices
  dm flakey: add support for zoned block devices
  dm: introduce dm_remap_zone_report()
  dm: fix REQ_OP_ZONE_REPORT bio handling
  dm: fix REQ_OP_ZONE_RESET bio handling
  dm table: add zoned block devices validation
  dm: convert DM printk macros to pr_<level> macros
  dm crypt: add big-endian variant of plain64 IV
  dm bio prison: use rb_entry() rather than container_of()
  dm ioctl: report event number in DM_LIST_DEVICES
  dm ioctl: add a new DM_DEV_ARM_POLL ioctl
  dm: add basic support for using the select or poll function

Pull rdma update from Doug Ledford:
 "This includes two bugs against the newly added opa vnic that were
  found by turning on the debug kernel options:

   - sleeping while holding a lock, so a one line fix where they
     switched it from GFP_KERNEL allocation to a GFP_ATOMIC allocation

   - a case where they had an isolated caller of their code that could
     call them in an atomic context so they had to switch their use of a
     mutex to a spinlock to be safe, so this was considerably more lines
     of diff because all uses of that lock had to be switched

  In addition, the bug that was discussed with you already about an out
  of bounds array access in ib_uverbs_modify_qp and ib_uverbs_create_ah
  and is only seven lines of diff.

  And finally, one fix to an earlier fix in the -rc cycle that broke
  hfi1 and qib in regards to IPoIB (this one is, unfortunately, larger
  than I would like for a -rc7 submission, but fixing the problem
  required that we not treat all devices as though they had allocated a
  netdev universally because it isn't true, and it took 70 lines of diff
  to resolve the issue, but the final patch has been vetted by Intel and
  Mellanox and they've both given their approval to the fix).

  Summary:

   - Two fixes for OPA found by debug kernel
   - Fix for user supplied input causing kernel problems
   - Fix for the IPoIB fixes submitted around -rc4"

[ Doug sent this having not noticed the 4.12 release, so I guess I'll be
  getting another rdma pull request with the actuakl merge window
  updates and not just fixes.

  Oh well - it would have been nice if this small update had been the
  merge window one.     - Linus ]

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
  IB/core, opa_vnic, hfi1, mlx5: Properly free rdma_netdev
  RDMA/uverbs: Check port number supplied by user verbs cmds
  IB/opa_vnic: Use spinlock instead of mutex for stats_lock
  IB/opa_vnic: Use GFP_ATOMIC while sending trap

Pull pin control updates from Linus Walleij:
 "This is the big bulk of pin control changes for the v4.13 series:

  Core:
   - The documentation is moved over to RST.
   - We now have agreed bindings for enabling input and output buffers
     without actually enabling input and/or output on a pin. We are
     chiseling out some details of pin control electronics.

  New drivers:
   - ZTE ZX
   - Renesas RZA1
   - MIPS Ingenic JZ47xx: also switch over existing drivers in the tree
     to use this pin controller and consolidate earlier spread out code.
   - Microschip MCP23S08: this driver is migrated from the GPIO
     subsystem and totally rewritten to use proper pin control. All
     users are switched over.

  New subdrivers:
   - Renesas R8A7743 and R8A7745.
   - Allwinner Sunxi A83T R_PIO.
   - Marvell MVEBU Armada CP110 and AP806.
   - Intel Cannon Lake PCH.
   - Qualcomm IPQ8074.

  Notable improvements:
   - IRQ support on the Marvell MVEBU Armada 37xx.
   - Meson driver supports HDMI CEC, AO, I2S, SPDIF and PWM.
   - Rockchip driver now supports iomux-route switching for RK3228,
     RK3328 and RK3399.
   - Rockchip A10 and A20 are merged into a single driver.
   - STM32 has improved GPIO support.
   - Samsung Exynos drivers are split per ARMv7 and ARMv8.
   - Marvell MVEBU is converted to use regmap for register access.

  Maintenance:
   - Several Renesas SH-PFC refactorings and updates.
   - Serious code size cut for Mediatek MT7623.
   - Misc janitorial and MAINTAINERS fixes"

* tag 'pinctrl-v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (137 commits)
  pinctrl: samsung: Remove bogus irq_[un]mask from resource management
  pinctrl: rza1: make structures rza1_gpiochip_template and rza1_pinmux_ops static
  pinctrl: rza1: Remove unneeded wrong check for wrong variable
  pinctrl: qcom: Add ipq8074 pinctrl driver
  pinctrl: freescale: imx7d: make of_device_ids const.
  pinctrl: DT: extend the pinmux property to support integers array
  pinctrl: generic: Add output-enable property
  pinctrl: armada-37xx: Fix number of pin in sdio_sb
  pinctrl: armada-37xx: Fix uart2 group selection register mask
  pinctrl: bcm2835: Avoid warning from __irq_do_set_handler
  pinctrl: sh-pfc: r8a7795: Add PWM support
  MAINTAINERS: Add Qualcomm pinctrl drivers section
  arm: dts: dt-bindings: Add Renesas RZ/A1 pinctrl header
  dt-bindings: pinctrl: Add RZ/A1 bindings doc
  pinctrl: Renesas RZ/A1 pin and gpio controller
  pinctrl: sh-pfc: r8a7792: Add SCIF1 and SCIF2 pin groups
  pinctrl.txt: move it to the driver-api book
  pinctrl: ingenic: checking for NULL instead of IS_ERR()
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD20
  pinctrl: uniphier: fix WARN_ON() of pingroups dump on LD11
  ...

Pull LED updates from Jacek Anaszewski:
 "This time we're removing more than adding:

  Removed drivers:

    leds-versatile:
      - all users of the Versatile LED driver are deleted and replaced
        with the very generic leds-syscon

    leds-sead3:
      - SEAD3 is using the generic leds-syscon & regmap based
        register-bit-led driver

  LED class drivers improvements:

    ledtrig-gpio:
      - use threaded IRQ, which both simplifies the code because we can
        drop the workqueue indirection, and it enables using the trigger
        for GPIOs that work with threaded IRQs themselves
      - refresh LED state after GPIO change since the new GPIO may have
        a different state than the old one

    leds-lp55xx:
      - make various arrays static const

    leds-pca963x:
      - add bindings to invert polarity"

* tag 'leds_for_4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: lp55xx: make various arrays static const
  leds: Remove SEAD-3 driver
  leds: trigger: gpio: Use threaded IRQ
  leds: trigger: gpio: Refresh LED state after GPIO change
  leds: Delete obsolete Versatile driver
  leds: pca963x: Add bindings to invert polarity

Pull media updates from Mauro Carvalho Chehab:

 - addition of fwnode support at V4L2 core

 - addition of a few more SDR formats

 - new imx driver to support i.MX6 cameras

 - new driver for Qualcon venus codecs

 - new I2C sensor drivers: dw9714, max2175, ov13858, ov5640

 - new CEC driver: stm32-cec

 - some improvements to DVB frontend documentation and a few fixups

 - several driver improvements and fixups

* tag 'media/v4.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (361 commits)
  [media] media: entity: Catch unbalanced media_pipeline_stop calls
  [media] media/uapi/v4l: clarify cropcap/crop/selection behavior
  [media] v4l2-ioctl/exynos: fix G/S_SELECTION's type handling
  [media] vimc: sen: Declare vimc_sen_video_ops as static
  [media] vimc: sca: Add scaler
  [media] vimc: deb: Add debayer filter
  [media] vimc: Subdevices as modules
  [media] vimc: cap: Support several image formats
  [media] vimc: sen: Support several image formats
  [media] vimc: common: Add vimc_colorimetry_clamp
  [media] vimc: common: Add vimc_link_validate
  [media] vimc: common: Add vimc_pipeline_s_stream helper
  [media] vimc: common: Add vimc_ent_sd_* helper
  [media] vimc: Move common code from the core
  [media] vimc: sen: Integrate the tpg on the sensor
  [media] media: i2c: ov772x: Force use of SCCB protocol
  [media] dvb uapi docs: enums are passed by value, not reference
  [media] dvb: don't use 'time_t' in event ioctl
  [media] media: venus: enable building with COMPILE_TEST
  [media] af9013: refactor power control
  ...

Pull sound updates from Takashi Iwai:
 "This development cycle resulted in a fair amount of changes in both
  core and driver sides. The most significant change in ALSA core is
  about PCM. Also the support of of-graph card and the new DAPM widget
  for DSP are noteworthy changes in ASoC core. And there're lots of
  small changes splat over the tree, as you can see in diffstat.

  Below are a few highlights:

  ALSA core:
   - Removal of set_fs() hackery from PCM core stuff, and the code
     reorganization / optimization thereafter
   - Improved support of PCM ack ops, and a new ABI for improved
     control/status mmap handling
   - Lots of constifications in various codes

  ASoC core:
   - The support of of-graph card, which may work as a better generic
     device for a replacement of simple-card
   - New widget types intended mainly for use with DSPs

  ASoC drivers:
   - New drivers for Allwinner V3s SoCs
   - Ensonic ES8316 codec support
   - More Intel SKL and KBL works
   - More device support for Intel SST Atom (mostly for cheap tablets
     and 2-in-1 devices)
   - Support for Rockchip PDM controllers
   - Support for STM32 I2S and S/PDIF controllers
   - Support for ZTE AUD96P22 codecs

  HD-audio:
   - Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks
     for HP and Dell machines
   - A few more fixes for i915 component binding"

* tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (418 commits)
  ALSA: hda - Fix unbalance of i915 module refcount
  ASoC: Intel: Skylake: Remove driver debugfs exit
  ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h
  ALSA: hda/realtek - Remove GPIO_MASK
  ALSA: hda/realtek - Fix typo of pincfg for Dell quirk
  ALSA: pcm: add a documentation for tracepoints
  ALSA: atmel: ac97c: fix error return code in atmel_ac97c_probe()
  ALSA: x86: fix error return code in hdmi_lpe_audio_probe()
  ASoC: Intel: Skylake: Add support to read firmware registers
  ASoC: Intel: Skylake: Add sram address to sst_addr structure
  ASoC: Intel: Skylake: Debugfs facility to dump module config
  ASoC: Intel: Skylake: Add debugfs support
  ASoC: fix semicolon.cocci warnings
  ASoC: rt5645: Add quirk override by module option
  ASoC: rsnd: make arrays path and cmd_case static const
  ASoC: audio-graph-card: add widgets and routing for external amplifier support
  ASoC: audio-graph-card: update bindings for amplifier support
  ASoC: rt5665: calibration should be done before jack detection
  ASoC: rsnd: constify dev_pm_ops structures.
  ASoC: nau8825: change crosstalk-bypass property to bool type
  ...

Pull cgroup changes from Tejun Heo:

 - Waiman made the debug controller work and a lot more useful on
   cgroup2

 - There were a couple issues with cgroup subtree delegation. The
   documentation on delegating to a non-root user was missing some part
   and cgroup namespace support wasn't factoring in delegation at all.
   The documentation is updated and the now there is a mount option to
   make cgroup namespace fit for delegation

* 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: implement "nsdelegate" mount option
  cgroup: restructure cgroup_procs_write_permission()
  cgroup: "cgroup.subtree_control" should be writeable by delegatee
  cgroup: fix lockdep warning in debug controller
  cgroup: refactor cgroup_masks_read() in the debug controller
  cgroup: make debug an implicit controller on cgroup2
  cgroup: Make debug cgroup support v2 and thread mode
  cgroup: Make Kconfig prompt of debug cgroup more accurate
  cgroup: Move debug cgroup to its own file
  cgroup: Keep accurate count of tasks in each css_set

Pull libata updates from Tejun Heo:

 - Christoph added support for TCG OPAL self encrypting disks

 - Minwoo added support for ATA PASS-THROUGH(32)

 - Linus Walleij removed spurious drvdata assignments in some drivers

 - Support for a few new device and other fixes

* 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (33 commits)
  sd: add support for TCG OPAL self encrypting disks
  libata: fix build warning from unused goto label
  libata: Support for an ATA PASS-THROUGH(32) command.
  ahci: Add Device ID for ASMedia 1061R and 1062R
  sata_via: Enable optional hotplug on VT6420
  ata: ahci_brcm: Avoid writing to read-only registers
  libata: Add the AHCI_HFLAG_NO_WRITE_TO_RO flag
  libata: Add the AHCI_HFLAG_YES_ALPM flag
  ata: ftide010: fix resource printing
  libata: make the function name in comment match the actual function
  ata: sata_rcar: make of_device_ids const.
  ata: pata_octeon_cf: make of_device_ids const.
  libata: Convert bare printks to pr_cont
  libahci: wrong comments in ahci_do_softreset()
  ata: declare ata_port_info structures as const
  ata: Add driver for Faraday Technology FTIDE010
  ata: Add DT bindings for the Gemini SATA bridge
  ata: Add DT bindings for Faraday Technology FTIDE010
  libata: implement SECURITY PROTOCOL IN/OUT
  libata: factor out a ata_identify_page_supported helper
  ...

Pull percpu updates from Tejun Heo:
 "These are the percpu changes for the v4.13-rc1 merge window. There are
  a couple visibility related changes - tracepoints and allocator stats
  through debugfs, along with __ro_after_init markings and a cosmetic
  rename in percpu_counter.

  Please note that the simple O(#elements_in_the_chunk) area allocator
  used by percpu allocator is again showing scalability issues,
  primarily with bpf allocating and freeing large number of counters.
  Dennis is working on the replacement allocator and the percpu
  allocator will be seeing increased churns in the coming cycles"

* 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: fix static checker warnings in pcpu_destroy_chunk
  percpu: fix early calls for spinlock in pcpu_stats
  percpu: resolve err may not be initialized in pcpu_alloc
  percpu_counter: Rename __percpu_counter_add to percpu_counter_add_batch
  percpu: add tracepoint support for percpu memory
  percpu: expose statistics about percpu memory via debugfs
  percpu: migrate percpu data structures to internal header
  percpu: add missing lockdep_assert_held to func pcpu_free_area
  mark most percpu globals as __ro_after_init

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull another parisc update from Helge Deller:
 "Christoph Hellwig provided one patch for the parisc architecture to
  drop the DMA_ERROR_CODE define from the parisc architecture"

* 'parisc-4.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: ->mapping_error

Pull arm64 updates from Will Deacon:

 - RAS reporting via GHES/APEI (ACPI)

 - Indirect ftrace trampolines for modules

 - Improvements to kernel fault reporting

 - Page poisoning

 - Sigframe cleanups and preparation for SVE context

 - Core dump fixes

 - Sparse fixes (mainly relating to endianness)

 - xgene SoC PMU v3 driver

 - Misc cleanups and non-critical fixes

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (75 commits)
  arm64: fix endianness annotation for 'struct jit_ctx' and friends
  arm64: cpuinfo: constify attribute_group structures.
  arm64: ptrace: Fix incorrect get_user() use in compat_vfp_set()
  arm64: ptrace: Remove redundant overrun check from compat_vfp_set()
  arm64: ptrace: Avoid setting compat FP[SC]R to garbage if get_user fails
  arm64: fix endianness annotation for __apply_alternatives()/get_alt_insn()
  arm64: fix endianness annotation in get_kaslr_seed()
  arm64: add missing conversion to __wsum in ip_fast_csum()
  arm64: fix endianness annotation in acpi_parking_protocol.c
  arm64: use readq() instead of readl() to read 64bit entry_point
  arm64: fix endianness annotation for reloc_insn_movw() & reloc_insn_imm()
  arm64: fix endianness annotation for aarch64_insn_write()
  arm64: fix endianness annotation in aarch64_insn_read()
  arm64: fix endianness annotation in call_undef_hook()
  arm64: fix endianness annotation for debug-monitors.c
  ras: mark stub functions as 'inline'
  arm64: pass endianness info to sparse
  arm64: ftrace: fix !CONFIG_ARM64_MODULE_PLTS kernels
  arm64: signal: Allow expansion of the signal frame
  acpi: apei: check for pending errors when probing GHES entries
  ...

Pull mnt namespace updates from Eric Biederman:
 "A big break-through came during this development cycle as a way was
  found to maintain the existing umount -l semantics while allowing for
  optimizations that improve the performance. That is represented by the
  first change in this series moving the reparenting of mounts into
  their own pass. This has allowed addressing the horrific performance
  of umount -l on a carefully crafted tree of mounts with locks held
  (0.06s vs 60s in my testing). What allowed this was not changing where
  umounts propagate to while propgating umounts.

  The next change fixes the case where the order of the mount whose
  umount are being progated visits a tree where the mounts are stacked
  upon each other in another order. This is weird but not hard to
  implement.

  The final change takes advantage of the unchanging mount propgation
  tree to skip parts of the mount propgation tree that have already been
  visited. Yielding a very nice speed up in the worst case.

  There remains one outstanding question about the semantics of umount -l
  that I am still discussiong with Ram Pai. In practice that area of the
  semantics was changed by 1064f874 ("mnt: Tuck mounts under others
  instead of creating shadow/side mounts.") and no regressions have been
  reported. Still I intend to finish talking that out with him to ensure
  there is not something a more intense use of mount propagation in the
  future will not cause to become significant"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  mnt: Make propagate_umount less slow for overlapping mount propagation trees
  mnt: In propgate_umount handle visiting mounts in any order
  mnt: In umount propagation reparent in a separate pass

Pull GFS2 updates from Bob Peterson:
 "We've got eight GFS2 patches for this merge window:

   - Andreas Gruenbacher has four patches related to cleaning up the
     GFS2 inode evict process. This is about half of his patches
     designed to fix a long-standing GFS2 hang related to the inode
     shrinker: Shrinker calls gfs2 evict, evict calls DLM, DLM requires
     memory and blocks on the shrinker.

     These four patches have been well tested. His second set of patches
     are still being tested, so I plan to hold them until the next merge
     window, after we have more weeks of testing. The first patch
     eliminates the flush_delayed_work, which can block.

   - Andreas's second patch protects setting of gl_object for rgrps with
     a spin_lock to prevent proven races.

   - His third patch introduces a centralized mechanism for queueing
     glock work with better reference counting, to prevent more races.

    -His fourth patch retains a reference to inode glocks when an error
     occurs while creating an inode. This keeps the subsequent evict
     from needing to reacquire the glock, which might call into DLM and
     block in low memory conditions.

   - Arvind Yadav has a patch to add const to attribute_group
     structures.

   - I have a patch to detect directory entry inconsistencies and
     withdraw the file system if any are found. Better that than silent
     corruption.

   - I have a patch to remove a vestigial variable from glock
     structures, saving some slab space.

   - I have another patch to remove a vestigial variable from the GFS2
     in-core superblock structure"

* tag 'gfs2-4.13.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  GFS2: constify attribute_group structures.
  gfs2: gfs2_create_inode: Keep glock across iput
  gfs2: Clean up glock work enqueuing
  gfs2: Protect gl->gl_object by spin lock
  gfs2: Get rid of flush_delayed_work in gfs2_evict_inode
  GFS2: Eliminate vestigial sd_log_flush_wrapped
  GFS2: Remove gl_list from glock structure
  GFS2: Withdraw when directory entry inconsistencies are detected

Pull btrfs updates from David Sterba:
 "The core updates improve error handling (mostly related to bios), with
  the usual incremental work on the GFP_NOFS (mis)use removal,
  refactoring or cleanups. Except the two top patches, all have been in
  for-next for an extensive amount of time.

  User visible changes:

   - statx support

   - quota override tunable

   - improved compression thresholds

   - obsoleted mount option alloc_start

  Core updates:

   - bio-related updates:
       - faster bio cloning
       - no allocation failures
       - preallocated flush bios

   - more kvzalloc use, memalloc_nofs protections, GFP_NOFS updates

   - prep work for btree_inode removal

   - dir-item validation

   - qgoup fixes and updates

   - cleanups:
       - removed unused struct members, unused code, refactoring
       - argument refactoring (fs_info/root, caller -> callee sink)
       - SEARCH_TREE ioctl docs"

* 'for-4.13-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (115 commits)
  btrfs: Remove false alert when fiemap range is smaller than on-disk extent
  btrfs: Don't clear SGID when inheriting ACLs
  btrfs: fix integer overflow in calc_reclaim_items_nr
  btrfs: scrub: fix target device intialization while setting up scrub context
  btrfs: qgroup: Fix qgroup reserved space underflow by only freeing reserved ranges
  btrfs: qgroup: Introduce extent changeset for qgroup reserve functions
  btrfs: qgroup: Fix qgroup reserved space underflow caused by buffered write and quotas being enabled
  btrfs: qgroup: Return actually freed bytes for qgroup release or free data
  btrfs: qgroup: Cleanup btrfs_qgroup_prepare_account_extents function
  btrfs: qgroup: Add quick exit for non-fs extents
  Btrfs: rework delayed ref total_bytes_pinned accounting
  Btrfs: return old and new total ref mods when adding delayed refs
  Btrfs: always account pinned bytes when dropping a tree block ref
  Btrfs: update total_bytes_pinned when pinning down extents
  Btrfs: make BUG_ON() in add_pinned_bytes() an ASSERT()
  Btrfs: make add_pinned_bytes() take an s64 num_bytes instead of u64
  btrfs: fix validation of XATTR_ITEM dir items
  btrfs: Verify dir_item in iterate_object_props
  btrfs: Check name_len before in btrfs_del_root_ref
  btrfs: Check name_len before reading btrfs_get_name
  ...

Pull memdup_user() conversions from Al Viro:
 "A fairly self-contained series - hunting down open-coded memdup_user()
  and memdup_user_nul() instances"

* 'work.memdup_user' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  bpf: don't open-code memdup_user()
  kimage_file_prepare_segments(): don't open-code memdup_user()
  ethtool: don't open-code memdup_user()
  do_ip_setsockopt(): don't open-code memdup_user()
  do_ipv6_setsockopt(): don't open-code memdup_user()
  irda: don't open-code memdup_user()
  xfrm_user_policy(): don't open-code memdup_user()
  ima_write_policy(): don't open-code memdup_user_nul()
  sel_write_validatetrans(): don't open-code memdup_user_nul()

Pull timer-related user access updates from Al Viro:
 "Continuation of timers-related stuff (there had been more, but my
  parts of that series are already merged via timers/core). This is more
  of y2038 work by Deepa Dinamani, partially disrupted by the
  unification of native and compat timers-related syscalls"

* 'timers-compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  posix_clocks: Use get_itimerspec64() and put_itimerspec64()
  timerfd: Use get_itimerspec64() and put_itimerspec64()
  nanosleep: Use get_timespec64() and put_timespec64()
  posix-timers: Use get_timespec64() and put_timespec64()
  posix-stubs: Conditionally include COMPAT_SYS_NI defines
  time: introduce {get,put}_itimerspec64
  time: add get_timespec64 and put_timespec64

Pull read/write updates from Al Viro:
 "Christoph's fs/read_write.c series - consolidation and cleanups"

* 'work.read_write' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  nfsd: remove nfsd_vfs_read
  nfsd: use vfs_iter_read/write
  fs: implement vfs_iter_write using do_iter_write
  fs: implement vfs_iter_read using do_iter_read
  fs: move more code into do_iter_read/do_iter_write
  fs: remove __do_readv_writev
  fs: remove do_compat_readv_writev
  fs: remove do_readv_writev

IPOIB is calling free_rdma_netdev even though alloc_rdma_netdev has
returned -EOPNOTSUPP.
Move free_rdma_netdev from ib_device structure to rdma_netdev structure
thus ensuring proper cleanup function is called for the rdma net device.

Fix the following trace:

ib0: Failed to modify QP to ERROR state
BUG: unable to handle kernel paging request at 0000000000001d20
IP: hfi1_vnic_free_rn+0x26/0xb0 [hfi1]
Call Trace:
 ipoib_remove_one+0xbe/0x160 [ib_ipoib]
 ib_unregister_device+0xd0/0x170 [ib_core]
 rvt_unregister_device+0x29/0x90 [rdmavt]
 hfi1_unregister_ib_device+0x1a/0x100 [hfi1]
 remove_one+0x4b/0x220 [hfi1]
 pci_device_remove+0x39/0xc0
 device_release_driver_internal+0x141/0x200
 driver_detach+0x3f/0x80
 bus_remove_driver+0x55/0xd0
 driver_unregister+0x2c/0x50
 pci_unregister_driver+0x2a/0xa0
 hfi1_mod_cleanup+0x10/0xf65 [hfi1]
 SyS_delete_module+0x171/0x250
 do_syscall_64+0x67/0x150
 entry_SYSCALL64_slow_path+0x25/0x25
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

Pull wait syscall updates from Al Viro:
 "Consolidating sys_wait* and compat counterparts.

  Gets rid of set_fs()/double-copy mess, simplifies the whole thing
  (lifting the copyouts to the syscalls means less headache in the part
  that does actual work - fewer failure exits, to start with), gets rid
  of the overhead of field-by-field __put_user()"

* 'work.sys_wait' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  osf_wait4: switch to kernel_wait4()
  waitid(): switch copyout of siginfo to unsafe_put_user()
  wait_task_zombie: consolidate info logics
  kill wait_noreap_copyout()
  lift getrusage() from wait_noreap_copyout()
  waitid(2): leave copyout of siginfo to syscall itself
  kernel_wait4()/kernel_waitid(): delay copying status to userland
  wait4(2)/waitid(2): separate copying rusage to userland
  move compat wait4 and waitid next to native variants

Pull misc user access cleanups from Al Viro:
 "The first pile is assorted getting rid of cargo-culted access_ok(),
  cargo-culted set_fs() and field-by-field copyouts.

  The same description applies to a lot of stuff in other branches -
  this is just the stuff that didn't fit into a more specific topical
  branch"

* 'work.misc-set_fs' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  Switch flock copyin/copyout primitives to copy_{from,to}_user()
  fs/fcntl: return -ESRCH in f_setown when pid/pgid can't be found
  fs/fcntl: f_setown, avoid undefined behaviour
  fs/fcntl: f_setown, allow returning error
  lpfc debugfs: get rid of pointless access_ok()
  adb: get rid of pointless access_ok()
  isdn: get rid of pointless access_ok()
  compat statfs: switch to copy_to_user()
  fs/locks: don't mess with the address limit in compat_fcntl64
  nfsd_readlink(): switch to vfs_get_link()
  drbd: ->sendpage() never needed set_fs()
  fs/locks: pass kernel struct flock to fcntl_getlk/setlk
  fs: locks: Fix some troubles at kernel-doc comments

A zone ID is a 32 bits unsigned int which can overflow when doing the
bit shifts in dmz_start_sect().  With a 256 MB zone size drive, the
overflow happens for a zone ID >= 8192.

Fix this by casting the zone ID to a sector_t before doing the bit
shift.  While at it, similarly fix dmz_start_block().
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Every developer always thinks that _their_ code is so special and
magical that it should be enabled by default.

And most of them are completely and utterly wrong.  That's definitely
the case when you write a specialty driver for a very unsual "security
processor". It does *not* get to mark itself as "default m".

If you solve world hunger, and make a driver that cures people of
cancer, by all means enable it by default.  But afaik, the Cavium
CNN55XX does neither.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

DMA_ERROR_CODE already went away in linux-next, but parisc unfortunately
added a new instance of it without any review as far as I can tell.

Move the two iommu drivers to report errors through ->mapping_error.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Helge Deller <deller@gmx.de>

Pull networking updates from David Miller:
 "Reasonably busy this cycle, but perhaps not as busy as in the 4.12
  merge window:

   1) Several optimizations for UDP processing under high load from
      Paolo Abeni.

   2) Support pacing internally in TCP when using the sch_fq packet
      scheduler for this is not practical. From Eric Dumazet.

   3) Support mutliple filter chains per qdisc, from Jiri Pirko.

   4) Move to 1ms TCP timestamp clock, from Eric Dumazet.

   5) Add batch dequeueing to vhost_net, from Jason Wang.

   6) Flesh out more completely SCTP checksum offload support, from
      Davide Caratti.

   7) More plumbing of extended netlink ACKs, from David Ahern, Pablo
      Neira Ayuso, and Matthias Schiffer.

   8) Add devlink support to nfp driver, from Simon Horman.

   9) Add RTM_F_FIB_MATCH flag to RTM_GETROUTE queries, from Roopa
      Prabhu.

  10) Add stack depth tracking to BPF verifier and use this information
      in the various eBPF JITs. From Alexei Starovoitov.

  11) Support XDP on qed device VFs, from Yuval Mintz.

  12) Introduce BPF PROG ID for better introspection of installed BPF
      programs. From Martin KaFai Lau.

  13) Add bpf_set_hash helper for TC bpf programs, from Daniel Borkmann.

  14) For loads, allow narrower accesses in bpf verifier checking, from
      Yonghong Song.

  15) Support MIPS in the BPF selftests and samples infrastructure, the
      MIPS eBPF JIT will be merged in via the MIPS GIT tree. From David
      Daney.

  16) Support kernel based TLS, from Dave Watson and others.

  17) Remove completely DST garbage collection, from Wei Wang.

  18) Allow installing TCP MD5 rules using prefixes, from Ivan
      Delalande.

  19) Add XDP support to Intel i40e driver, from Björn Töpel

  20) Add support for TC flower offload in nfp driver, from Simon
      Horman, Pieter Jansen van Vuuren, Benjamin LaHaise, Jakub
      Kicinski, and Bert van Leeuwen.

  21) IPSEC offloading support in mlx5, from Ilan Tayari.

  22) Add HW PTP support to macb driver, from Rafal Ozieblo.

  23) Networking refcount_t conversions, From Elena Reshetova.

  24) Add sock_ops support to BPF, from Lawrence Brako. This is useful
      for tuning the TCP sockopt settings of a group of applications,
      currently via CGROUPs"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1899 commits)
  net: phy: dp83867: add workaround for incorrect RX_CTRL pin strap
  dt-bindings: phy: dp83867: provide a workaround for incorrect RX_CTRL pin strap
  cxgb4: Support for get_ts_info ethtool method
  cxgb4: Add PTP Hardware Clock (PHC) support
  cxgb4: time stamping interface for PTP
  nfp: default to chained metadata prepend format
  nfp: remove legacy MAC address lookup
  nfp: improve order of interfaces in breakout mode
  net: macb: remove extraneous return when MACB_EXT_DESC is defined
  bpf: add missing break in for the TCP_BPF_SNDCWND_CLAMP case
  bpf: fix return in load_bpf_file
  mpls: fix rtm policy in mpls_getroute
  net, ax25: convert ax25_cb.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_route.refcount from atomic_t to refcount_t
  net, ax25: convert ax25_uid_assoc.refcount from atomic_t to refcount_t
  net, sctp: convert sctp_ep_common.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_transport.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_chunk.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_datamsg.refcnt from atomic_t to refcount_t
  net, sctp: convert sctp_auth_bytes.refcnt from atomic_t to refcount_t
  ...

Pull crypto updates from Herbert Xu:
 "Algorithms:
   - add private key generation to ecdh

  Drivers:
   - add generic gcm(aes) to aesni-intel
   - add SafeXcel EIP197 crypto engine driver
   - add ecb(aes), cfb(aes) and ecb(des3_ede) to cavium
   - add support for CNN55XX adapters in cavium
   - add ctr mode to chcr
   - add support for gcm(aes) to omap"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (140 commits)
  crypto: testmgr - Reenable sha1/aes in FIPS mode
  crypto: ccp - Release locks before returning
  crypto: cavium/nitrox - dma_mapping_error() returns bool
  crypto: doc - fix typo in docs
  Documentation/bindings: Document the SafeXel cryptographic engine driver
  crypto: caam - fix gfp allocation flags (part II)
  crypto: caam - fix gfp allocation flags (part I)
  crypto: drbg - Fixes panic in wait_for_completion call
  crypto: caam - make of_device_ids const.
  crypto: vmx - remove unnecessary check
  crypto: n2 - make of_device_ids const
  crypto: inside-secure - use the base_end pointer in ring rollback
  crypto: inside-secure - increase the batch size
  crypto: inside-secure - only dequeue when needed
  crypto: inside-secure - get the backlog before dequeueing the request
  crypto: inside-secure - stop requeueing failed requests
  crypto: inside-secure - use one queue per hw ring
  crypto: inside-secure - update the context and request later
  crypto: inside-secure - align the cipher and hash send functions
  crypto: inside-secure - optimize DSE bufferability control
  ...