Add emif node for keystone2 devices, which is used for ECC support.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
[t-kristo@ti.com: made emif enabled by default for all keystone2 devices]
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add a watchdog node for keystone-k2g, with the corresponding clock and
power domain handles.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'at91-ab-4.17-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt

Pull "AT91 DT for 4.17" from Alexandre Belloni:

Not much this cycle, mainly changes on the Axentia boards from Peter and
a cleanup from Bartosz:

 - use 'atmel' as at24 manufacturer
 - device addition and fixes for axentia boards
 - fix sama5d4 pinctrl compatible

* tag 'at91-ab-4.17-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9263ek
  ARM: dts: at91: use 'atmel' as at24 manufacturer for at91-sama5d2_ptc_ek
  ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9g20ek
  ARM: dts: at91: use 'atmel' as at24 manufacturer for at91sam9260ek
  ARM: dts: at91: use 'atmel' as at24 manufacturer for sama5d34ek
  ARM: dts: at91: sama5d4: fix pinctrl compatible string
  ARM: dts: at91: tse850: make the sound dai cell count explicit
  ARM: dts: at91: nattis: add lvds-encoder
  ARM: dts: at91: nattis: use up-to-date mtd partitions
  ARM: dts: at91: tse850: use the correct compatible for the eeprom
  ARM: dts: at91: nattis: use the correct compatible for the eeprom
  ARM: dts: at91: sam9rl: Properly assign copyright

Pull "mvebu dt64 for 4.17 (part 1)" from Gregory CLEMENT:

- convert to the SPDX-License-Identifier
- add missing clocks (for the registers) on some of the peripherals
- use the new nand driver
- add more uart for Armada 7K/8K SoCs

* tag 'mvebu-dt64-4.17-1' of git://git.infradead.org/linux-mvebu:
  ARM64: dts: marvell: armada-cp110: Add apb_pclk clock for the uart nodes
  arm64: dts: marvell: use reworked NAND controller driver on Armada 8K
  arm64: dts: marvell: use reworked NAND controller driver on Armada 7K
  ARM64: dts: marvell: armada-cp110: Add registers clock for sata node
  arm64: dts: marvell: armada-8080-db: use SPDX-License-Identifier
  arm64: dts: marvell: armada-8040-mcbin: use SPDX-License-Identifier
  arm64: dts: marvell: armada-8040-db: use SPDX-License-Identifier
  arm64: dts: marvell: armada-7040-db: use SPDX-License-Identifier
  arm64: dts: marvell: armada-3720-espressobin: use SPDX-License-Identifier
  arm64: dts: marvell: armada-3720-db: use SPDX-License-Identifier
  arm64: dts: marvell: use SPDX-License-Identifier for Armada SoCs
  arm64: dts: marvell: mcbin: fix board name typo
  arm64: dts: marvell: mcbin: enable uart headers
  arm64: dts: marvell: add CP110 uart peripherals
  ARM64: dts: marvell: armada-cp110: Add registers clock for I2C nodes
  ARM64: dts: marvell: armada-cp110: Add registers clock for SPI nodes

Pull "mvebu dt for 4.17 (part 1)" from Gregory CLEMENT:

Most of them are small fixes or cleanup.

Only the change on the clearfog will have a noticeable effect allowing
to use the i2c at an higher frequency.

* tag 'mvebu-dt-4.17-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada388-clearfog: increase speed of i2c0 to 400kHz
  arm: dts: kirkwood: fix error in #sound-dai-cells size
  ARM: dts: kirkwood: Fix "debounce-interval" property misspelling
  ARM: dts: armada: netgear-rn*: fix rtc node name

Pull "ARM64: DT: Hisilicon SoC DT updates for 4.17" from Wei Xu:

- Add XGE CPLD control support for hip07 SoC
- Disable the SMMU on hip06 and hip07 SoCs becuase of
  the hardware limitation
- Enable HS200 mode for the MMC controller on hi6220 hikey board
- Remove "cooling-{min|max}-level" this kind unused properties
  for hi6220 SoC
- Add watchdog node for hi6220 SoC
- Remove "CPU_NAP" idle state on hikey960 board since it is
  not stable and useless with the updated firmware

* tag 'hisi-arm64-dt-for-4.17' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: Hi3660: Remove 'CPU_NAP' idle state
  arm64: dts: hi6220: enable watchdog
  ARM64: dts: hi6220: Remove "cooling-{min|max}-level" for CPU nodes
  arm64: dts: hikey: Enable HS200 mode on eMMC
  arm64: dts: hisi: Disable hisilicon smmu node on hip06/hip07
  arm64: dts: hisi: add hns-dsaf cpld control for the hip07 SoC

Pull "arm: Xilinx(Zynq and ZynqMP) DT changes for v4.17" from Michal Simek:

- Use SPDX license identifier
- Add Xilinx ZynqMP boards
  zcu100-revC, zcu102-revA/revB/rev1.0, zcu104-revA, zcu106-revA,
  zcu111-revA, zc1751 dc1/dc2/dc3/dc4
- Add Xilinx Zynq boards
  cc108, zc770 dc1/dc2/dc3/dc4
- Add Digilent Zybo Z7
- Minor fixes in current DTSes

* tag 'xilinx-dt-for-4.17' of https://github.com/Xilinx/linux-xlnx: (22 commits)
  arm: dts: zynq: Add Digilent Zybo Z7 board
  arm: zynq: Add support for Xilinx zc770 xm013 dc4 board
  arm: zynq: Add support for Xilinx zc770 xm012 dc3 board
  arm: zynq: Add support for Xilinx zc770 xm011 dc2 board
  arm: zynq: Add support for Xilinx zc770 xm010 dc1 board
  arm: zynq: Add Xilinx cc108 board
  arm: zynq: Add missing address node name in microzed board
  arm: dts: zynq: Use SPDX-License-Identifier
  arm: zynq: Use i2c-mux instead of i2cswitch for pca9548
  arm64: zynqmp: Add support for Xilinx zc1751
  arm64: zynqmp: Add support for Xilinx zc12XX boards
  arm64: zynqmp: Add support for Xilinx zcu111-revA
  arm64: zynqmp: Add support for Xilinx zcu106-revA
  arm64: zynqmp: Add support for Xilinx zcu104-revA
  arm64: zynqmp: Add support for Xilinx zcu102
  arm64: zynqmp: Add support for Xilinx zcu100-revC
  dt-bindings: xilinx: Add description for ZynqMP
  arm64: zynqmp: Add 8-bit bus width property for ep108
  arm64: zynqmp: Added OOB timing settings in zynqmp-ep108.dts
  arm64: zynqmp: Add SPDX license identifier
  ...

This extra clock is needed to access the registers of the UARTs used on
CP110 component of the Armada 7K/8K SoCs.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

This add a DTS for the Digilent Zybo Z7 board.
This board is the successor board of Zybo, these are almost the same except
for ps-clk-frequency specifications.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu@cybertrust.co.jp>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, ethernet, i2c, qspi, spi and uart.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, 2x i2c, nor flash, spi and uart.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains can, i2c, nand uart, spi and usb.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

zc770 is based board which is extended by FMC/DC cards for SoC
validation. FMCs/DCs are supposed to cover all SoC configurations.
FMC/DC contains ethernet port, can, i2c, sd, qspi, spi, uart and usb.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

The board contains 7z010 with 512MB memory, ethernet, qspi, uart, usbs
and sd. But board is not supporting booting from sd card.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

This patch is fixing issue reported by dtc:
arch/arm/boot/dts/zynq-microzed.dtb: Warning (unit_address_vs_reg): Node
/memory has a reg or ranges property, but no unit name
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Follow trend and use the SPDX License description.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

i2c muxes should described like this.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Xilinx zc1751 boards is used for silicon validation. Board can be
extended with 5 FMCs/DCs cards to connect various IPs. Describe all
these combinations.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

These 3 boards requires minimal support to get Linux up and running.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

Xilinx zcu111 is a customer board. It is reusing some parts from zcu102.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

Xilinx zcu106 is a customer board. It is reusing some parts from zcu102.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

Xilinx zcu104 is another customer board. It is sort of zcu102 clone
with some differences.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

This patch is adding revA, revB and rev1.0. There are also other
revisions between which should be backward compatible with previous
versions. Unfortunately all revs are still in use.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

This board has 2GB of memory, i2c, sd, wifi sdio, spis, uarts, display
port and usbs.
Board is using fixed clocks because clock driver hasn't been merged yet.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

Record xlnx,zynqmp compatible string.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>

This patch add 8-bit bus width property to eMMC node.
Signed-off-by: P L Sai Krishna <lakshmis@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch adds the sata port phy OOB timing values in the sata
device-tree node.
Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge tag 'samsung-dt64-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Pull "Samsung DTS ARM64 changes for v4.17" from Krzysztof Kozłowski:

1. Add support for HDMI audio on Exynos 5433 TM2/TM2E boards.
2. Add support for USB-MHL connector on Exynos 5433 TM2/TM2E boards.

* tag 'samsung-dt64-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: add OF graph between MHL and USB connector
  arm64: dts: exynos: add micro-USB connector node to TM2 platforms
  ARM: dts: exynos: Add support for HDMI audio on Exynos 5433 TM2 board
  ARM: dts: exynos: Update I2S0 device node in exynos5433
  ARM: dts: exynos: Add I2S1 device node to exynos5433

Merge tag 'samsung-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Pull "Samsung DTS ARM changes for v4.17" from Krzysztof Kozłowski:

1. Add WiFi to Artik 5 board.
2. Remove unused samsung_k3pe0e000b memory DTSI.
3. Add few remaining SPDX license identifiers.
4. Refactor Exynos4 by using labels for overriding/extending nodes and
   moving respective nodes under the 'soc' node.
5. Add three new Exynos4412-based boards: GT-I9300 (Samsung Galaxy S3),
   GT-I9305 (Samsung Galaxy S3 LTE) and GT-N7100/N7105 (Samsung Note 2).
   They are based heavily on existing Trats2 board.
6. Fix PMIC interrupts on Trats board.
7. Fix IOMMU for GScaler devices on Exynos5250.
8. Minor fixes in unit addresses pointed by DTC.
9. Minor cleanups from unused properties and duplicated code.

* tag 'samsung-dt-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (29 commits)
  ARM: dts: exynos: Fix IOMMU support for GScaler devices on Exynos5250
  ARM: dts: exynos: Remove unused bypass-smu property from Xyref5260
  ARM: dts: exynos: Add missing interrupts property to PMIC on Trats board
  ARM: dts: exynos: Fix unit addresses of PDMA nodes in Exynos5410
  ARM: dts: exynos: Fix address of PPMU ACP on Exynos4210
  ARM: dts: exynos: Cleanup power domain nodes in exynos3250.dtsi
  ARM: dts: exynos: Add touchscreen node to Exynos4412 N710x
  ARM: dts: exynos: Add Samsung's Exynos4412-based Midas boards
  ARM: dts: exynos: Split Trats2 DTS in preparation for Midas boards
  ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes
  dt-bindings: samsung: Document bindings for Midas family boards
  ARM: dts: exynos: Add soc node to exynos4412
  ARM: dts: exynos: Add soc node to exynos4210
  ARM: dts: exynos: Add soc node to exynos4
  ARM: dts: exynos: Add soc node to exynos5440
  ARM: dts: exynos: Use pmu label in exynos4412
  ARM: dts: exynos: Remove duplicated inclusion of syscon restart nodes on Exynos5410
  ARM: dts: exynos: Use label instead of full path in exynos4412-itop-elite
  ARM: dts: exynos: Use labels instead of full paths in exynos4412-trats2
  ARM: dts: exynos: Use label instead of full path in exynos4412-odroid-common
  ...

As of commit 7f60830a ("serial: sirf: Use generic
uart-has-rtscts DT property property"), the SiRF UART driver recognizes
the generic "uart-has-rtscts" DT property, deprecating the
vendor-specific "sirf,uart-has-rtscts" DT property. Hence replace the
latter by the former in all DTS files.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'stm32-dt-for-v4.17-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt

Pull "STM32 DT updates for v4.17, round 1" from Alexandre Torgue:

Highlights:
-----------
 -Add support of STM32MP157 MPU and stm32mp157c eval board
 -Add SD supports on F4 and F7 boards
 -Add leds support on stm32f469 and stm32f769 disco boards
 -Add push button support on stm32f469 and stm32f769 disco boards
 -Add EXTI, SPI, RTC, USB HS/FS support on STM32H743 MCU
 -Add RTC and USB OTG HS on stm32f769-disco
 -Use dedicated files for F7 pinctrl

* tag 'stm32-dt-for-v4.17-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (34 commits)
  ARM: dts: stm32: Fix sdio2 rcc hard coded value
  dt-bindings: mfd: Add STM32F7 SDMMC2 rcc entry
  ARM: dts: stm32: Enable sdio1 for stm32f769-disco
  ARM: dts: stm32: Enable sdio1 for stm32f746-eval
  ARM: dts: stm32: Enable sdio1 for stm32f746-disco
  ARM: dts: stm32: Add sdio pins definition for stm32f7
  ARM: dts: stm32: add SPI support on STM32H743 SoC
  ARM: dts: stm32: enable RTC on stm32h743i-eval
  ARM: dts: stm32: add RTC support on STM32H743
  ARM: dts: stm32: enable USB OTG HS on stm32h743i-eval
  ARM: dts: stm32: add USB OTG HS and FS support for STM32H743 SoC
  ARM: dts: stm32: enable RTC on stm32f769-disco
  ARM: dts: stm32: enable USB HS on stm32f769-disco
  ARM: dts: stm32: select otg mode for usbotg_hs on stm32746g_eval
  ARM: dts: stm32: add gadget fifo sizes to usbotg_hs on stm32f746
  ARM: dts: stm32: Add push button to stm32f769 Discovery board
  ARM: dts: stm32: Add push button to stm32f469 Discovery board
  ARM: dts: stm32: Add leds support to stm32f769 Discovery board
  ARM: dts: stm32: Add leds support to stm32f469 Discovery board
  ARM: dts: stm32: Fix HSE clock frequency for stm32h743i-disco board
  ...

Merge tag 'omap-for-v4.17/dt-sdhci-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "Device tree changes for dra7 sdhci for v4.17" from Tony Lindgren:

This series from Sekhar Nori and Kishon Vijay Abraham I adds
sdhci related nodes for dra7. To support higher transfer speeds,
the iodelay pinmux controller needs to be also configured.

Note that as these changes need SDHCI_OMAP to be enabled to avoid
breaking booting for various systems, these changes are based on
two defconfig changes to enable SDHCI_OMAP in the defconfig files.

* tag 'omap-for-v4.17/dt-sdhci-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am57xx-idk: Select pull down for mmc1_clk line in default mode
  ARM: dts: dra71-evm: Select pull down for mmc1_clk line in default mode
  ARM: dts: dra71-evm: Correct evm_sd regulator max voltage
  ARM: dts: dra76-evm: Add "vqmmc-supply" property for mmc2
  ARM: dts: am57xx-idk: Add "vqmmc-supply" property for mmc2
  ARM: dts: dra7-evm: Add "vqmmc-supply" property for mmc2
  ARM: dts: dra7-evm: Remove mmc specific pinmux
  ARM: dts: am57xx-beagle-x15: Add "vqmmc-supply" property for mmc2
  ARM: dts: dra76-evm: Add pinctrl data for higher speed MMC/SD modes
  ARM: dts: dra76-evm: Shift to using common IOdelay data
  ARM: dts: dra76x: Create a common file with MMC/SD IOdelay data
  ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP
  ARM: multi_v7_defconfig: Enable CONFIG_MMC_SDHCI_OMAP

Merge tag 'keystone_dts_for_4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt

Pull "ARM: Keystone DTS for 4.17" from Santosh Shilimkar:

 - Andrew's various DTS warning fixes
 - clock address separator fix
 - EDAC support for EMIF
 - serial dts node unit address format fix

* tag 'keystone_dts_for_4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: dts: keystone-k2g: Fix unit-address formatting for serial nodes
  dt-bindings: memory: ti-emif: add edac support under emif
  ARM: dts: keystone-k2e-clocks: Fix missing unit address separator
  ARM: dts: keystone-k2g: Move usb-phy nodes out of soc0
  ARM: dts: keystone-k2g: Move keystone_dsp_gpio to under device-state-control
  ARM: dts: keystone-k2g: Move keystone_irq to under device-state-control
  ARM: dts: keystone-k2hk: Move keystone_dsp_gpio to under device-state-control
  ARM: dts: keystone-k2l: Move keystone_dsp_gpio to under device-state-control
  ARM: dts: keystone-k2e: Move keystone_dsp_gpio to under device-state-control
  ARM: dts: keystone: Move reset-controller to under device-state-control
  ARM: dts: keystone: Move keystone_irq to under device-state-control

Merge tag 'omap-for-v4.17/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Pull "Device tree changes for omap variants for v4.17" from Tony Lindgren:

This series of changes updates the device tree files for omaps:

- Nokia N9 support for magnetometer

- Update at24 to use atmel as manufacturer for am335x-boneblue

- Add support for am33xx based PDU001 board

- Update Droid 4 touchscreen for reset-gpios and add audio
  codec and soundcard

- Remove unused dra7 cooling level nodes

- A series of changes to configure am335x and am437x for PM

- Add pinmuxing for i2c2 and 3 for LogicPD boards

- Add EMIF interrupt infor for am437x and am335x

- Add missing omap3 sound-dai-cells

* tag 'omap-for-v4.17/dt-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
  ARM: dts: omap4-droid4: add soundcard
  ARM: dts: motorola-cpcap-mapphone: add audio-codec
  ARM: dts: omap3: Add missing #sound-dai-cells
  ARM: dts: am43xx: add emif interrupt info
  ARM: dts: am33xx: add emif interrupt info
  ARM: dts: Add pinmuxing for i2c2 and i2c3 for LogicPD SOM-LV
  ARM: dts: Add pinmuxing for i2c2 and i2c3 for LogicPD torpedo
  ARM: dts: am4372: Mark omap_l3_noc with ti,no-idle
  ARM: dts: am4372: Mark emif with ti,no-idle
  ARM: dts: am33xx: Mark emif with ti,no-idle
  ARM: dts: am4372: Add soc node
  ARM: dts: am33xx: Add pm-sram phandle to soc node
  ARM: dts: am4372: Update emif node
  ARM: dts: am33xx: Update emif node
  ARM: dts: am4372: Reserve pm code and data regions in ocmcram sram node
  ARM: dts: am33xx: Reserve pm code and data regions in ocmcram sram node
  ARM: dts: omap: Remove "cooling-{min|max}-level" for CPU nodes
  ARM: dts: omap4-droid4: update touchscreen
  ARM: dts: am33xx: add PDU001 board
  ARM: dts: use 'atmel' as at24 manufacturer in am335x-boneblue
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'juno-updates-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/dt

Pull "ARMv8 Vexpress/Juno DT updates for v4.17" from Sudeep Holla:

1. Extends support for missing 3 GICv2m MSI frames
2. Fixes the incorrect GICv2m frame size(64kB instead of 4kB)

* tag 'juno-updates-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: fix size of GICv2m MSI frames
  arm64: dts: juno: Describe the full GICv2m region

'linux,stdout-path' has been deprecated for some time in favor of
'stdout-path'. Now dtc will warn on occurrences of 'linux,stdout-path'.
Search and replace the one occurrence with 'stdout-path'.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

'linux,stdout-path' has been deprecated for some time in favor of
'stdout-path'. Now dtc will warn on occurrences of 'linux,stdout-path'.
Search and replace all the of occurrences with 'stdout-path'.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Spreadtrum SC9860 platform has one SC2731 PMIC, and the SC2731
PMIC integrates all mobile handset power management, audio codec,
battery management and user interface support function in a single
chip.

This patch adds the SC2731 dts file, as well as adding the RTC and
regulator device node for this PMIC.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

The Spreadtrum SC9860 platform has two DMA controllers, one is located
on the ap-ahb system, and another one is located on the agcp system.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add the watchdog device node for Spreadtrum SC9860 platform to
watch the system's stability.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>