- 16 Jun, 2005 2 commits
-
-
Catalin Marinas authored
Patch from Catalin Marinas The current red and blue colours on the Versatile CLCD are reversed when the 5:6:5 mode is used. The patch sets the proper bit in the SYS_CLCD register value. Signed-off-by: Catalin Marinas Signed-off-by:Russell King <rmk+kernel@arm.linux.org.uk>
-
David S. Miller authored
This fixes various crashes on 64-bit when using this module. Based upon a patch by Juergen Kreileder <jk@blackdown.de>. Signed-off-by:
David S. Miller <davem@davemloft.net> ACKed-by:
Patrick McHardy <kaber@trash.net>
-
- 15 Jun, 2005 1 commit
-
-
Olaf Hering authored
enable cpusets enable new lpfc and jsm drivers enable new dm-multipath leave new agp disabled disable rivafb, it does not handle the cards in G5 models (FX5200 as example) the new nvidiafb doesnt work on bigendian, yet Signed-off-by:
Olaf Hering <olh@suse.de> Acked-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- 14 Jun, 2005 16 commits
-
-
Paul Mackerras authored
Here is a patch to update the example configs in arch/ppc64/configs. Signed-off-by:
-
Karsten Wiese authored
Without this patch, some usb kobjects, which are parents to the usx2y's kobjects can be freed before the usx2y's. This led to an oops in get_kobj_path_length() and a dead keyboard, when the usx2y's kobjects were freed. The patch ensures the correct sequence. Tested ok on kernel 2.6.12-rc2. Present in ALSA cvs Signed-off-by:
Karsten Wiese <annabellesgarden@yahoo.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
Chris Wright <chrisw@osdl.org> Signed-off-by:
-
Karsten Wiese authored
Without this patch, some usb kobjects, which are parents to the usx2y's kobjects can be freed before the usx2y's. This led to an oops in get_kobj_path_length() and a dead keyboard, when the usx2y's kobjects were freed. The patch ensures the correct sequence. Tested ok on kernel 2.6.12-rc2. Present in ALSA cvs Signed-off-by:
-
Randy Dunlap authored
Module needs a license to prevent kernel tainting. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Thomas Hood authored
This patch causes the ignore_normal_resume flag to be set slightly earlier, before there is a chance that the apm driver will receive the normal resume event from the BIOS. (Addresses Debian bug #310865) Signed-off-by:
Thomas Hood <jdthood@yahoo.co.uk> Acked-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Markus Lidel authored
Fixed freeing of event memory in i2o_block_event() Signed-off-by:
Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by:
-
Jon Smirl authored
It prints out x,x instead of x,y. Signed-off-by:
Jon Smirl <jonsmirl@gmail.com> Cc: "Antonino A. Daplas" <adaplas@hotpop.com> Signed-off-by:
-
Jan Kara authored
On one path, cond_resched_lock() fails to return true if it dropped the lock. We think this might be causing the crashes in JBD's log_do_checkpoint(). Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Olof Johansson authored
On 64-bit machines, PCI_BASE_ADDRESS_MEM_MASK and other mask constants passed to pci_size() are 64-bit (for example ~0x0fUL). However, pci_size does comparisons between the u32 arguments and the mask, which will fail even though any result from pci_size is still just 32-bit. Changing the mask argument to u32 seems the obvious thing to do, since all arithmetic in the function is 32-bit and having a larger mask makes no sense. This triggered on a PPC64 system here where an adapter (VGA, as it happened) had a memory region base of 0xfe000000 and a sz of the same, matching the if (max == maxbase ...) test at the bottom of pci_size but failing the mask comparison. Quite a corner case which I guess explains why we haven't seen it until now. Signed-off-by:
Olof Johansson <olof@lixom.net> Acked-by:
Greg KH <greg@kroah.com> Signed-off-by:
-
Jeff Dike authored
This patch merges a lot of duplicated code in the slip and slirp drivers, abstracts out the slip protocol, and makes the slip driver work in 2.6. Signed-off-by:
Jeff Dike <jdike@addtoit.com> Signed-off-by:
-
Jeff Dike authored
Convert the boot-time host ptrace testing from clone to fork. They were essentially doing fork anyway. This cleans up the code a bit, and makes valgrind a bit happier about grinding it. Signed-off-by:
-
Jeff Dike authored
Fix a build failure when CONFIG_MODE_SKAS is disabled and make a Makefile comment fit in 80 columns. Signed-off-by:
-
Jeff Dike authored
A few files include the same header twice. Signed-off-by:
-
-
Patrick McHardy authored
Signed-off-by:
-
Linus Torvalds authored
This adds a clause that notes explicitly that the person doing the sign-off knows that the project (and his sign-off) is public and will possibly get archived and re-distributed.
-
- 13 Jun, 2005 21 commits
-
-
-
J. Simonetti authored
This patch alows you to change the source address of icmp error messages. It applies cleanly to 2.6.11.11 and retains the default behaviour. In the old (default) behaviour icmp error messages are sent with the ip of the exiting interface. The new behaviour (when the sysctl variable is toggled on), it will send the message with the ip of the interface that received the packet that caused the icmp error. This is the behaviour network administrators will expect from a router. It makes debugging complicated network layouts much easier. Also, all 'vendor routers' I know of have the later behaviour. Signed-off-by: -
Sridhar Samudrala authored
link local address. Signed-off-by:
Sridhar Samudrala <sri@us.ibm.com> Signed-off-by:
-
Neil Horman authored
Signed-off-by:
Neil Horman <nhorman@redhat.com> Signed-off-by:
-
Vladislav Yasevich authored
Signed-off-by:
Vladislav Yasevich <vladislav.yasevich@hp.com> Signed-off-by:
-
Neil Horman authored
Signed-off-by:
-
Vladislav Yasevich authored
Signed-off-by:
-
Rémi Denis-Courmont authored
Userland layer-2 tunneling devices allocated through the TUNTAP driver (drivers/net/tun.c) have a type of ARPHRD_NONE, and have no link-layer address. The kernel complains at regular interval when IPv6 Privacy extension are enabled because it can't find an hardware address : Dec 29 11:02:04 auguste kernel: __ipv6_regen_rndid(idev=cb3e0c00): cannot get EUI64 identifier; use random bytes. IPv6 Privacy extensions should probably be disabled on that sort of device. They won't work anyway. If userland wants a more usual Ethernet-ish interface with usual IPv6 autoconfiguration, it will use a TAP device with an emulated link-layer and a random hardware address rather than a TUN device. As far as I could fine, TUN virtual device from TUNTAP is the very only sort of device using ARPHRD_NONE as kernel device type. Signed-off-by:
Rmi Denis-Courmont <rdenis@simphalempin.com> Acked-by:
YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
YOSHIFUJI Hideaki authored
We saw following trace several times: |BUG: using smp_processor_id() in preemptible [00000001] code: httpd/30137 |caller is icmpv6_send+0x23/0x540 | [<c01ad63b>] smp_processor_id+0x9b/0xb8 | [<c02993e7>] icmpv6_send+0x23/0x540 This is because of icmpv6_socket, which is the only one user of smp_processor_id() in icmpv6_send(), AFAIK. Since it should be used in non-preemptive context, let's defer the dereference after disabling preemption (by icmpv6_xmit_lock()). Signed-off-by:
-
Linus Torvalds authored
-
Nicolas Pitre authored
Patch from Nicolas Pitre Signed-off-by: Nicolas Pitre Signed-off-by: -
Ralf Baechle authored
From: Ralf Baechle <ralf@linux-mips.org> There are archives of the old list at http://oss.sgi.com/archives/netdevSigned-off-by:
-
Randy Dunlap authored
Signed-off-by:
-
Andi Kleen authored
Signed-off-by:
Andi Kleen <ak@suse.de> Signed-off-by:
-
Tom Rini authored
<linux/if_tr.h> uses __be16, but does not directly include <asm/byteorder.h>. Add this in, so that dhcp/net-tools token ring code can compile again. Signed-off-by:
Tom Rini <trini@kernel.crashing.org> Signed-off-by:
-
Trond Myklebust authored
This fixes a data corruption error for mail delivery applications that expect to be able to do posix locking and then append writes on NFS. Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
David Brownell authored
This makes the EHCI driver spin a bit longer before concluding that the port reset failed. "Obviously safe." It allows some devices to enumerate that previously didn't. We've seen a bunch of these problem reports recently, this will make some go away. As reported by Michael Zapf <Michael.Zapf@uni-kassel.de>, some EHCI controllers seem to take forever to finish port resets and produce "port N reset error -110" type errors. Spinning a bit longer helps. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Alan Cox authored
The pwc chainsaw session left some setups not working. There is a sanity check on compression buffers that simply isn't right any more as we never allocate one. This doesn't address the email and other changes. I'll do those tomorrow if I get time, but it is the minimal fix for the code and basic feature set. Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
The current radeonfb memset's the framebuffer to 0 when loaded. This removes occasional artifacts but has the nasty side effect that if you load radeonfb without framebuffer console, you destroy the VGA text buffer, font, etc... radeon must not touch the framebuffer content when it doesn't "own" it. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Geert Uytterhoeven authored
M68k: Mark Sun-3 NCR5380 SCSI broken until NCR5380_abort() and NCR5380_bus_reset() are replaced with real new-style EH routines (the old EH SCSI constants were removed in 2.6.12-rc3). Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
