- 17 Jul, 2014 40 commits
-
-
Laurent Pinchart authored
The V4L2 specification states that "When the application did not call VIDIOC_QBUF or VIDIOC_STREAMON yet the poll() function succeeds, but sets the POLLERR flag in the revents field." The vb2_poll() function sets POLLERR when the queued buffers list is empty, regardless of whether this is caused by the stream not being active yet, or by a transient buffer underrun. Bring the implementation in line with the specification by returning POLLERR if no buffer has been queued only when the queue is not streaming. Buffer underruns during streaming are not treated specially anymore and just result in poll() blocking until the next event. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Pawel Osciak <pawel@osciak.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
Pixel color components can be scaled using either bilinear interpolation or a multitap filter. The multitap filter provides better results, but can't be selected when the alpha layer need to be scaled down by more than 1/2. Disable alpha scaling when the input has a fixed alpha value, and program the UDS to output a fixed alpha value in that case. This ensures the multitap filter will be used whenever possible. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Laurent Pinchart authored
Expose the background color to userspace through the V4L2_CID_BG_COLOR control. Signed-off-by:
-
Laurent Pinchart authored
The BRU outputs premultiplied colors, enable color data normalization when the format configured at the output of the pipeline isn't premultiplied. Signed-off-by:
-
Laurent Pinchart authored
Adjust the BRU blending formula to avoid the multiplication by alpha when the corresponding input format is premultiplied. As this requires access to the RPFs connected to the BRU inputs from the BRU module, store pointers to the RPFs in the BRU structure when validating the pipeline. Signed-off-by:
-
Laurent Pinchart authored
The control is used to configure the fixed alpha channel value, when reading from memory in the RPF or writing to memory in the WPF. Signed-off-by:
-
Laurent Pinchart authored
Support ARGB formats on the RPF side by reading the alpha component from memory and on the WPF side by writing it to memory. Signed-off-by:
-
Laurent Pinchart authored
The driver ignores the alpha component on output video nodes and hardcodes the alpha component to 0 on capture video nodes. Make this explicit by exposing XRGB formats. Compatibility with existing userspace applications is handled by selecting the XRGB format corresponding to the requested old RGB format. Signed-off-by:
-
Laurent Pinchart authored
The VSP1 stores the video pipelines' input (RPF) to output (WPF) mappings in a WPF register. An RPF must never be associated with multiple WPFs, even if all of those WPFs but one are unused, otherwise the hardware won't function properly. The driver doesn't ensure this correctly as it never clears the mappings. An RPF used with one WPF and later with a different WPF will lead to malfunction, as it will be associated with two WPFs. Clear the mappings at stream off time to fix this. Reported-by:
Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by:
-
Laurent Pinchart authored
Use the subdev pointer directly to_vsp1_pipeline() macro instead of casting from the subdev to the wpf object and back to the subdev. Signed-off-by:
-
Laurent Pinchart authored
The control value is currently stored in the SRU structure by the control set handler and written to the hardware at stream on time, making control set during streaming ineffective. Fix it by writing to the registers from within the control set handler. Signed-off-by:
-
Laurent Pinchart authored
The default value isn't set and defaults to 0, which isn't in the 1-6 min-max range. Fix it by setting the default value to 1. This shoud have been caught when checking the control handler error field at initialization time, but the check was missing. Add it. Signed-off-by:
-
Laurent Pinchart authored
When setting a control directly on a subdev node the VSP1 driver doesn't guarantee that the device is powered on. This leads to crashes when the control handlers writes to hardware registers. One easy way to fix this is to ensure that the device gets powered on when a subdev node is opened. However, this consumes power unnecessarily, as there's no need to power the device on when setting formats on the pipeline. Furthermore, control handler setup at entity init time suffers from the same problem as the device isn't powered on easier. Fix this by extend the entity base object to setup the control handler automatically when starting the stream. Entities must then skip writing to registers in the set control handler when not streaming, which can be tested with the new vsp1_entity_is_streaming() helper function. Signed-off-by:
-
Laurent Pinchart authored
Modify the vsp1_device_get() function to return an error code instead of a pointer to the VSP1 device, and use the return value in the callers. Signed-off-by:
-
Laurent Pinchart authored
Video nodes created and initialized in the RPF and WPF init code paths are never unregistered, and the related resources (videobuf alloc context and media entity) never released. Fix this by storing a pointer to the vsp1_video object in vsp1_entity and calling vsp1_video_cleanup() from vsp1_entity_destroy(). This also allows simplifying the init error code paths. Signed-off-by:
-
Laurent Pinchart authored
Several macros were mistakenly prefixed with VPS1 instead of VSP1. Fix them. Signed-off-by:
-
Laurent Pinchart authored
If the pipeline was already stopped when stopping the stream, no frame end interrupt will be generated and the driver will time out waiting for the pipeline to stop. Fix this by setting the pipeline state to STOPPED when the pipeline is idle waiting for frames to process, and to STOPPING at stream stop time only when the pipeline is currently RUNNING. Signed-off-by:
-
Laurent Pinchart authored
videobuf2 expects no buffer to be owned by the driver when the stop_stream queue operation returns. As the vsp1 driver fails to do so, a warning is generated at stream top time. Fix this by releasing all buffers queued on the IRQ queue in the stop_stream operation handler and marking them as erroneous. Signed-off-by:
-
Laurent Pinchart authored
Commit d9b45ed3 ("v4l: vsp1: Support multi-input entities") reworked pipeline routing configuration and introduced a bug by writing to the entities routing registers without first checking whether the entity had a routing register. This results in overwriting the value at offset 0 of the device register space when stopping the stream. Fix this by skipping routing register write for entities without a routing register. Signed-off-by:
-
Laurent Pinchart authored
videobuf2 stores the driver streaming state internally in the queue in the start_streaming_called variable. The state is set right after the driver start_stream operation returns, and checked in the vb2_buffer_done() function, typically called from the frame completion interrupt handler. A race condition exists if the hardware finishes processing the first frame before the start_stream operation returns. Fix this by setting start_streaming_called to 1 before calling the start_stream operation, and resetting it to 0 if the operation fails. Cc: stable@vger.kernel.org # for v3.15 and up Signed-off-by:
-
Laurent Pinchart authored
When set, the new V4L2_PIX_FMT_FLAG_PREMUL_ALPHA flag indicates that the pixel values are premultiplied by the alpha channel value. Signed-off-by:
-
Laurent Pinchart authored
The v4l2_pix_format structure has no reserved field. It is embedded in the v4l2_framebuffer structure which has no reserved fields either, and in the v4l2_format structure which has reserved fields that were not previously required to be zeroed out by applications. To allow extending v4l2_pix_format, inline it in the v4l2_framebuffer structure, and use the priv field as a magic value to indicate that the application has set all v4l2_pix_format extended fields and zeroed all reserved fields following the v4l2_pix_format field in the v4l2_format structure. The availability of this API extension is reported to userspace through the new V4L2_CAP_EXT_PIX_FORMAT capability flag. Just checking that the priv field is still set to the magic value at [GS]_FMT return wouldn't be enough, as older kernels don't zero the priv field on return. To simplify the internal API towards drivers zero the extended fields and set the priv field to the magic value for applications not aware of the extensions. Signed-off-by:
-
Laurent Pinchart authored
Extend the V4L2_CID_ALPHA_COMPONENT control for use on output devices, to set the alpha component value when the output format doesn't have an alpha channel. Signed-off-by:
-
Laurent Pinchart authored
The existing RGB pixel formats are ill-defined in respect to their alpha bits and their meaning is driver dependent. Create new standard ARGB and XRGB variants with clearly defined meanings and make the existing variants deprecated. The new pixel formats 4CC values have been selected to match the DRM 4CCs for the same in-memory formats. Signed-off-by:
-
Hans Verkuil authored
Commit 0ba2aeb6 increased the internal control ranges to 64 bit, but that caused problems in drivers that use the minimum/maximum/step/default_value control values in a division or modulus operations since not all architectures support those natively. Luckily, in almost all cases it is possible to just cast to 32 bits (the control value is known to be 32 bits, so it is safe to cast). Only in v4l2-ctrls.c was it necessary to use do_div in one function. Signed-off-by:
-
Hans Verkuil authored
Removed the "This type is only used-in array controls." sentence in DocBook which was thought to only confuse. Signed-off-by:
-
Hans Verkuil authored
This patch adds motion detection support to the go7007 driver using the new motion detection controls, events. The global motion detection works fine, but the regional motion detection support probably needs more work. There seems to be some interaction between regions that makes setting correct thresholds difficult. The exact meaning of the thresholds isn't entirely clear either. I do not have any documentation, the only information I have is the custom code in the driver and a modet.c application. Signed-off-by:
-
Hans Verkuil authored
The dma_map_sg() function can fail, so check for the return value. Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Hans Verkuil authored
Use the new motion detection event. Signed-off-by:
-
Hans Verkuil authored
Replace the custom ioctls to set motion detection thresholds by standard matrix controls. Signed-off-by:
-
Hans Verkuil authored
Document the new motion detection event. Signed-off-by:
-
Hans Verkuil authored
Add a new MOTION_DET event to signal when motion is detected. Signed-off-by:
-
Hans Verkuil authored
Document the 'Detect' control class and the new Motion Detection controls. Those controls will be used by the solo6x10 and go7007 drivers. Signed-off-by:
-
Hans Verkuil authored
Add the 'Detect' control class and the new motion detection controls. Those controls will be used by the solo6x10 and go7007 drivers. Signed-off-by:
-
Hans Verkuil authored
Various comments referred to videodev2.h, but the control definitions have been moved to v4l2-controls.h. Also add the same reminder message to each class of controls. Signed-off-by:
-
Hans Verkuil authored
These types are needed for the upcoming Motion Detection matrix controls, so document them. Signed-off-by:
-
Hans Verkuil authored
These are needed by the upcoming patches for the motion detection matrices. Signed-off-by:
-
Hans Verkuil authored
The way current and new values are accessed has changed. Update the document to bring it up to date with the code. Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Hans Verkuil authored
Document the support for compound types in controls. Signed-off-by:
-
