Per the comment in the change - it's not always prudent to immediately
remove the rport upon first notice of a disconnect. Make all rports
wait dev_loss_tmo before being deleted (and each could have a separate
dev_loss_tmo value).

The original post was:
http://marc.info/?l=linux-scsi&m=117392196006703&w=2

The repost contains the following changes:
 - Bug fix in fc_starget_delete(). Dev_loss_tmo_callbk() was called prior to
   tearing down the target. The callback is to be the last thing called, as
   it tells the LLDD that the rport is completely finished and can be torn
   down.  Rework so that terminate_rport_io() is called to terminate the
   outstanding io. Isolated work so it's is simply "starget" work.
 - Fix holes in original patch. There were code paths that did not expect
   the dev_loss_tmo timer to be running for the non-fcp rports.
 - Bug Fix: the transport wasn't protecting against a LLDD calling
   fc_remote_port_delete() back-to-back. Thus, the dev_loss_tmo timer
   could be restarted such that it fires after the rport had been deleted.
   Validate rport state before starting the timer.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Enables multi-initiator support on ipr RAID adapters that support it.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Formats ipr dual adapter errors so that they are more compact.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Increases the adapter operational timeout for some adapters that support
dual controller configurations, since they may take longer to come ready.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

In ipr dual adapter configurations, the ipr adapter firmware
may require an adapter reset for various reasons. The reset
is requested by the adapter firmware logging an error with
an IOASC of 0x02048000. Add support to log this error, and
reset the adapter.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

On newer levels of microcode for ipr RAID adapters supporting
multi-initiator configurations, the disk array, or VSET, resources
are capable of generating a check condition. This patch prevents
ipr from generating sense data in this scenario and retrieving it
from the logical device instead.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

On certain ipr RAID adapters, which are capable of multi-initiator
configurations, the disk array, or VSET, resources will be in a POR
Unit Attention state following an adapter reset. In order for the
midlayer to handle the UA, I must report a bus reset to the logical
disk array bus at the end of an adapter reset.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Since driver_data for pci ids in the ipr driver is now
just flags, we can allow these to be passed in from userspace
for dynamic ids.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

This patch fixes some scenarios where an ipr adapter
could get reset overlapped, which could cause very
long timeouts to occur, or PCI bus errors.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

- make needlessly global code static
- #if 0 unused functions
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Ravi Anand <ravi.anand@qlogic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Change version number to 8.1.12
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Update copyright year to 2007
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Added support for 8G speed and new HBAs.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Add support for async scanning

Notes: This is the async scan patch to our driver from Matthew Wilcox.
  The async scan logic is still subject to errors in insmod/rmmod, as
  the async scan threads don't get shutdown when the module unloads
  underneath them. See http://marc.info/?l=linux-scsi&m=117551999925582&w=2Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Don't process ERATT interrupts when issuing KILL_BOARD mbx command
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Collapse discovery lists to a single node list.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Reference count node structures for node lifetime management.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Improve handling of failed ELS aborts.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Improve diagnostic messages and change local loopback message to KERN_INFO
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Fixed recovery of rport after race with dev_loss_tmo
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Round 2 of Miscellaneous fixes:
 - Ensure we don't prematurely re-enable IRQs in lpfc_sli_abort_fcp_cmpl().
 - Prevent freeing of iocb after IOCB_TIMEDOUT error.
 - Added code to cleanup REG_LOGIN mailbox command when a LOGO is received.
 - Fix offline window where more work can sneak in after clearing work_ha
 - Use target reset instead of LU reset in bus_device_reset_handler
 - Fixed system hangs due to leaked host_lock.
 - Fixed NULL pointer dereference during I/O with LIP.
 - Fixed false iocb timeout.
 - Fixed name server query response handling.
 - Change rport dev_loss_tmo value when user change lpfc HBA's dev_loss_tmo.
 - Fixed a memory leak in lpfc_sli_wake_mbox_wait.
 - Fixed check for dropped frames.
 - Removed hba queue depth calculation based on device PCI IDs
 - Change min cr_count value specified in comment to agree with setting
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Reorganize lpfc_nlp_list() and callers to prepare for nodelist simplification.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Fix unlock inside list traversal.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Rework offline path to solve HBA reset issues
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Modify ELS abort handling to prevent double completion

Rework portions of ELS abort handling to prevent double completion
 - Rework ELS iotags and correct abort routine
 - Move the (badly wrong) ELS completion logic from the initial ELS
   abort request function to the ELS completion function.
 - Fixup the iocb completion handling to account for the ELS abort
   completions.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Misc bug fixes and code cleanup:
 - Fix system hang while running on systems with IOMMU
 - Fix use after free issues with rports
 - Don't free mailbox structure if it's still on the mboxq list
 - Decrement txq_cnt rather than txcmplq_cnt when parsing the txq list
 - Use msleep for long delays to prevent soft lockup bug check
 - Don't remove node during dev_loss_tmo if discovery is active
 - Fix memory leaks in get/reset statistics and link attention paths
 - Fixed lpfc_ns_rsp to handle entire GID_FT response.
 - mbox interface should use MAILBOX_CMD_SIZE rather than sizeof(MAILBOX_t)
 - Fixed bug check in add_timer.
 - Fixup messages 0116, 0117, and 0128 to report ELS I/O tag.
 - Remove unused parameter to lpfc_cleanup.
 - Change mailbox timeout handling.
 - Remove unused buflist. Code cleanup.
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Use the sysfs configurable timeout when issuing a START_UNIT
command from the scsi error handler. This is needed for devices which
take longer than thirty seconds to respond to the start
unit. The problem was observed when sending a start unit
to a disk array device in an ipr RAID adapter, which results
in the adapter firmware sending potentially multiple commands
to physical devices as a result of this command, which ended
up timing out sometimes. This patch does not change the default
value used for this command.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Update the driver version reported by MEGAIOC_QDRVRVER to
match LSI_COMMON_MOD_VERSION.
Signed-off-by: David Milburn <dmilburn@redhat.com>
Acked-by: "Patro, Sumant" <Sumant.Patro@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

QLA1280: call pci_set_dma_mask with DMA_64BIT_MASK instead of  ~ 0ULL
Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Inspired somewhat by Vignesh Babu <vignesh.babu@wipro.com> patch to
dpt_i2o.c to replace kmalloc/memset sequences with kzalloc, doing the
same for the aacraid driver.
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Replacing kmalloc/memset combination with kzalloc.
Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Replacing kmalloc/memset combination with kzalloc.
Signed-off-by: vignesh babu <vignesh.babu@wipro.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Fix typo in cifs readme from previous commit
  [CIFS] Make sec=none force an anonymous mount
  [CIFS] Change semaphore to mutex for cifs lock_sem
  [CIFS] Fix oops in reset_cifs_unix_caps on reconnect
  [CIFS] UID/GID override on CIFS mounts to Samba
  [CIFS] prefixpath mounts to servers supporting posix paths used wrong slash
  [CIFS] Update cifs version to 1.49
  [CIFS] Replace kmalloc/memset combination with kzalloc
  [CIFS]  Add IPv6 support
  [CIFS] New CIFS POSIX mkdir performance improvement (part 2)
  [CIFS] New CIFS POSIX mkdir performance improvement
  [CIFS] Add write perm for usr to file on windows should remove r/o dos attr
  [CIFS] Remove unnecessary parm to cifs_reopen_file
  [CIFS] Switch cifsd to kthread_run from kernel_thread
  [CIFS] Remove unnecessary checks

Signed-off-by: Steve French <sfrench@us.ibm.com>

* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: (231 commits)
  [PATCH] i386: Don't delete cpu_devs data to identify different x86 types in late_initcall
  [PATCH] i386: type may be unused
  [PATCH] i386: Some additional chipset register values validation.
  [PATCH] i386: Add missing !X86_PAE dependincy to the 2G/2G split.
  [PATCH] x86-64: Don't exclude asm-offsets.c in Documentation/dontdiff
  [PATCH] i386: avoid redundant preempt_disable in __unlazy_fpu
  [PATCH] i386: white space fixes in i387.h
  [PATCH] i386: Drop noisy e820 debugging printks
  [PATCH] x86-64: Fix allnoconfig error in genapic_flat.c
  [PATCH] x86-64: Shut up warnings for vfat compat ioctls on other file systems
  [PATCH] x86-64: Share identical video.S between i386 and x86-64
  [PATCH] x86-64: Remove CONFIG_REORDER
  [PATCH] x86-64: Print type and size correctly for unknown compat ioctls
  [PATCH] i386: Remove copy_*_user BUG_ONs for (size < 0)
  [PATCH] i386: Little cleanups in smpboot.c
  [PATCH] x86-64: Don't enable NUMA for a single node in K8 NUMA scanning
  [PATCH] x86: Use RDTSCP for synchronous get_cycles if possible
  [PATCH] i386: Add X86_FEATURE_RDTSCP
  [PATCH] i386: Implement X86_FEATURE_SYNC_RDTSC on i386
  [PATCH] i386: Implement alternative_io for i386
  ...

Fix up trivial conflict in include/linux/highmem.h manually.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It still used the long-deprecated "pci_module_init()" interface, rather
than the proper "pci_register_driver()" one.

[ I don't have the hardware, and I doubt many do, but the fix is
  trivial and obvious, and can't be worse than not compiling ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

  CC      fs/nfs/nfsroot.o
fs/nfs/nfsroot.c:131: error: tokens causes a section type conflict
make[2]: *** [fs/nfs/nfsroot.o] Error 1

This is due to mixing const and non-const content in the same section
which halfway recent gccs absolutely hate.  Fixed by dropping the const.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TG3]: Add TG3_FLAG_SUPPORT_MSI flag.
  [TG3]: Eliminate the TG3_FLAG_5701_REG_WRITE_BUG flag.
  [TG3]: Eliminate the TG3_FLAG_GOT_SERDES_FLOWCTL flag.
  [TG3]: Remove reset during MAC address changes.
  [TG3]: WoL fixes.
  [TG3]: Clear GPIO mask before storing.
  [TG3]: Improve NVRAM sizing.
  [TG3]: Fix TSO bugs.
  [MAC80211]: Add maintainers entry for mac80211.
  [MAC80211]: Add debugfs attributes.
  [MAC80211]: Add mac80211 wireless stack.
  [MAC80211]: Add generic include/linux/ieee80211.h
  [NETLINK]: Remove references to process ID
  [AF_IUCV]: Compile fix - adopt to skbuff changes.

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (87 commits)
  [SCSI] fusion: fix domain validation loops
  [SCSI] qla2xxx: fix regression on sparc64
  [SCSI] modalias for scsi devices
  [SCSI] sg: cap reserved_size values at max_sectors
  [SCSI] BusLogic: stop using check_region
  [SCSI] tgt: fix rdma transfer bugs
  [SCSI] aacraid: fix aacraid not finding device
  [SCSI] aacraid: Correct SMC products in aacraid.txt
  [SCSI] scsi_error.c: Add EH Start Unit retry
  [SCSI] aacraid: [Fastboot] Panics for AACRAID driver during 'insmod' for kexec test.
  [SCSI] ipr: Driver version to 2.3.2
  [SCSI] ipr: Faster sg list fetch
  [SCSI] ipr: Return better qc_issue errors
  [SCSI] ipr: Disrupt device error
  [SCSI] ipr: Improve async error logging level control
  [SCSI] ipr: PCI unblock config access fix
  [SCSI] ipr: Fix for oops following SATA request sense
  [SCSI] ipr: Log error for SAS dual path switch
  [SCSI] ipr: Enable logging of debug error data for all devices
  [SCSI] ipr: Add new PCI-E IDs to device table
  ...