- 22 May, 2020 21 commits
-
-
Bruce Allan authored
The else conditional expression is always true due to the if conditional expression; remove it and add a comment to make it obvious still. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Lihong Yang authored
In function ice_set_mac_address, we will remove old dev_addr before adding the new MAC. In the removing and adding process of the MAC, there is no need to return error if the check finds the to-be-removed dev_addr does not exist in the MAC filter list or the to-be-added mac already exists, keep going or return success accordingly. Signed-off-by:
Lihong Yang <lihong.yang@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
-
Michal Swiatkowski authored
Move filter functions to separate file. Add functions that prepare suitable ice_fltr_info struct depending on the filter type and add this struct to earlier created list: - ice_fltr_add_mac_to_list - ice_fltr_add_vlan_to_list - ice_fltr_add_eth_to_list This functions are used in adding and removing filters. Create wrappers for functions mentioned above that alloc list, add suitable ice_fltr_info to it and call add or remove function. - ice_fltr_prepare_mac - ice_fltr_prepare_mac_and_broadcast - ice_fltr_prepare_vlan - ice_fltr_prepare_eth Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
-
Eric Joyner authored
Memory allocated in the ice_add_prof_id_vsig() function wasn't being properly freed if an error occurred inside the for-loop in the function. In particular, 'p' wasn't being freed if an error occurred before it was added to the resource list at the end of the for-loop. Signed-off-by:
Eric Joyner <eric.joyner@intel.com> Signed-off-by:
-
Jesse Brandeburg authored
The vf_id variable is dealt with in the code in inconsistent ways of sign usage, preventing compilation with -Werror=sign-compare. Fix this problem in the code by always treating vf_id as unsigned, since there are no valid values of vf_id that are negative. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
-
Karol Kolacinski authored
Change min() macros to min_t() which has compare type specified and it helps avoid precision loss. In some cases there was precision loss during calls or assignments. Some fields in structs were unnecessarily large and gave multiple warnings. There were also some minor type differences which are now fixed as well as some cases where a simple cast was needed. Callers were were passing data that is a u16 to ice_sched_cfg_node_bw_alloc() but the function was truncating that to a u8. Fix that by changing the function to take a u16. Signed-off-by:
Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by:
-
Lihong Yang authored
When printing the ice status or AQ error codes, instead of printing out the numerical value, provide the description of the error code. This provides more info about the issue than a number. Signed-off-by:
-
Anirudh Venkataramanan authored
As soon as the driver registers the PF netdev, userspace utilities like NetworkManager try to bring up the associated interface. When this happens, the driver may not have finished initializing fully, resulting in a bunch of errors in the interface up flow. The driver already has a mechanism to indicate if it's not up yet; by setting the __ICE_DOWN bit in pf->state, but this bit gets cleared too early in the current flow. So clear this bit only when the driver is fully up. Also check for the same bit in the ice_open flow, and return -EBUSY if the bit is set. Also in ice_open, replace references of vsi->back with a local variable. Signed-off-by:
-
Dave Ertman authored
Currently, the ice driver is setting a PHY configuration, which causes a link drop, and then additionally it calls for a nway_reset, which restarts auto-negotiation on the link, which also causes a link drop. These two link events in such close timing is causing the FW to not be able to generate a link interrupt for the driver to respond to. Remove the unnecessary auto-negotiation restart from the set pauseparams flow. Also remove error path that would have performed an ice_down/ice_up as that is also unnecessary. Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by:
-
Dave Ertman authored
The current implementation for contiguous TC check is assuming that the UPs will be mapped to TCs in a linear progressing fashion. This is obviously not always true. Change the check to allow for various UP2TC mapping configurations. Signed-off-by:
-
Avinash JD authored
When there's a Tx timeout for a queue which belongs to a PFC enabled TC, then it's not because the queue is hung but because PFC is in action. In PFC, peer sends a pause frame for a specified period of time when its buffer threshold is exceeded (due to congestion). Netdev on the other hand checks if ACK is received within a specified time for a TX packet, if not, it'll invoke the tx_timeout routine. Signed-off-by:
Avinash JD <avinash.dayanand@intel.com> Signed-off-by:
-
Brett Creeley authored
Implement promiscuous support for VF VSIs. Behaviour of promiscuous support is based on VF trust as well as the, introduced, vf-true-promisc flag. A trusted VF with vf-true-promisc disabled will be the default VSI, which means that all traffic without a matching destination MAC address in the device's internal switch will be forwarded to this VF VSI. A trusted VF with vf-true-promisc enabled will go into "true promiscuous mode". This amounts to the VF receiving all ingress and egress traffic that hits the device's internal switch. An untrusted VF will only receive traffic destined for that VF. The vf-true-promisc-support flag cannot be toggled while any VF is in promiscuous mode. This flag should be set prior to loading the iavf driver or spawning VF(s). Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Tested-by:
-
Tony Nguyen authored
Create a boost TCAM entry for each tunnel port in order to get a tunnel PTYPE. Update netdev feature flags and implement the appropriate logic to get and set values for hardware offloads. Signed-off-by:
Henry Tieman <henry.w.tieman@intel.com> Tested-by:
-
Jacob Keller authored
The flash memory for the ice hardware contains a block of information used for link management called the Netlist module. As this essentially represents another section of firmware, add its version information to the output of the driver's .info_get handler. This includes both a version and the first few bytes of a hash of the module contents. fw.netlist -> the version information extracted from the netlist module fw.netlist.build-> first 4 bytes of the hash of the contents, similar to fw.mgmt.build Signed-off-by:Jacob Keller <jacob.e.keller@intel.com> Tested-by:
-
David S. Miller authored
Oleksij Rempel says: ==================== provide KAPI for SQI This patches are extending ethtool netlink interface to export Signal Quality Index (SQI). SQI provided by 100Base-T1 PHYs and can be used for cable diagnostic. Compared to a typical cable tests, this value can be only used after link is established. changes v3: - rename __ethtool_get_sqi* to linkstate_get_sqi*. And move this functions to the net/ethtool/linkstate.c - protect linkstate_get_sqi* with locking changes v2: - use u32 instead of u8 for SQI - add SQI_MAX field and callbacks - some style fixes in the rst. - do not convert index to shifted index. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
This patch implements reading of the Signal Quality Index for better cable/link troubleshooting. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Oleksij Rempel authored
Signal Quality Index is a mandatory value required by "OPEN Alliance SIG" for the 100Base-T1 PHYs [1]. This indicator can be used for cable integrity diagnostic and investigating other noise sources and implement by at least two vendors: NXP[2] and TI[3]. [1] http://www.opensig.org/download/document/218/Advanced_PHY_features_for_automotive_Ethernet_V1.0.pdf [2] https://www.nxp.com/docs/en/data-sheet/TJA1100.pdf [3] https://www.ti.com/product/DP83TC811R-Q1Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
-
David S. Miller authored
Yuval Basson says: ==================== qed: Add xrc core support for RoCE This patch adds support for configuring XRC and provides the necessary APIs for rdma upper layer driver (qedr) to enable the XRC feature. ==================== Signed-off-by: -
Yuval Basson authored
Add support for XRC-SRQ's and XRC-QP's for upper layer driver. We maintain separate bitmaps for resource management for srq and xrc-srq, However, the range in FW is one, The xrc-srq's are first and then the srq's follow. Therefore we maintain a srq-id offset. v2: perform cleanups if XRC bitmpas allocation fail. Signed-off-by:
Michal Kalderon <mkalderon@marvell.com> Signed-off-by:
Yuval Bason <ybason@marvell.com> Signed-off-by:
-
Yuval Basson authored
First ILT page for TSDM client is allocated for XRC-SRQ's. For regular SRQ's skip first ILT page that is reserved for XRC-SRQ's. Signed-off-by:
-
Chris Mi authored
Currently, psample can only send the packet bits after decapsulation. The tunnel information is lost. Add the tunnel support. If the sampled packet has no tunnel info, the behavior is the same as before. If it has, add a nested metadata field named PSAMPLE_ATTR_TUNNEL and include the tunnel subfields if applicable. Increase the metadata length for sampled packet with the tunnel info. If new subfields of tunnel info should be included, update the metadata length accordingly. Signed-off-by:
Chris Mi <chrism@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
- 21 May, 2020 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2020-05-19 This series contains updates to igc only. Sasha cleans up the igc driver code that is not used or needed. Vitaly cleans up driver code that was used to support Virtualization on a device that is not supported by igc, so remove the dead code. Andre renames a few macros to align with register and field names described in the data sheet. Also adds the VLAN Priority Queue Fliter and EType Queue Filter registers to the list of registers dumped by igc_get_regs(). Added additional debug messages and updated return codes for unsupported features. Refactored the VLAN priority filtering code to move the core logic into igc_main.c. Cleaned up duplicate code and useless code. ==================== Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsDavid S. Miller authored
Al Viro says: ==================== uaccess-related stuff in net/* Assorted uaccess-related work in net/*. First, there's getting rid of compat_alloc_user_space() mess in MCAST_... [gs]etsockopt() - no need to play with copying to/from temporary object on userland stack, etc., when ->compat_[sg]etsockopt() instances in question can easly do everything without that. That's the first 13 patches. Then there's a trivial bit in net/batman-adv (completely unrelated to everything else) and finally getting the atm compat ioctls into simpler shape. ==================== Signed-off-by: -
Al Viro authored
Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
Al Viro authored
Signed-off-by: -
Al Viro authored
... and sod the compat_alloc_user_space() with its complications Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
atm_dev_ioctl() does copyin in two different ways - one for ATM_GETNAMES, another for everything else. Start with separating the former into a new helper (atm_getnames()). The next step will be to lift the copyin into the callers. Signed-off-by: -
Al Viro authored
address is passed only to copy_to_user() Signed-off-by: -
Al Viro authored
not used anymore Signed-off-by: -
Al Viro authored
Native ->setsockopt() handling of these options (MCAST_..._SOURCE_GROUP and MCAST_{,UN}BLOCK_SOURCE) consists of copyin + call of a helper that does the actual work. The only change needed for ->compat_setsockopt() is a slightly different copyin - the helpers can be reused as-is. Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
direct parallel to the way these two are handled in the native ->setsockopt() instances - the helpers that do the real work are already separated and can be reused as-is in this case. Signed-off-by: -
Al Viro authored
similar to the ipv4 counterpart of that patch - the same trick used to align the tail array properly. Signed-off-by: -
Al Viro authored
that way we'll be able to reuse it for compat case Signed-off-by: -
Al Viro authored
Parallel to what the native setsockopt() does, except that unlike the native setsockopt() we do not use memdup_user() - we want the sockaddr_storage fields properly aligned, so we allocate 4 bytes more and copy compat_group_filter at the offset 4, which yields the proper alignments. Signed-off-by: -
Al Viro authored
Signed-off-by: -
Al Viro authored
now we can do MCAST_MSFILTER in compat ->getsockopt() without playing silly buggers with copying things back and forth. We can form a native struct group_filter (sans the variable-length tail) on stack, pass that + pointer to the tail of original request to the helper doing the bulk of the work, then do the rest of copyout - same as the native getsockopt() does. Signed-off-by: -
Al Viro authored
pass the userland pointer to the array in its tail, so that part gets copied out by our functions; copyout of everything else is done in the callers. Rationale: reuse for compat; the array is the same in native and compat, the layout of parts before it is different for compat. Signed-off-by:
-
