- 07 Jul, 2020 4 commits
-
-
David S. Miller authored
Alex Elder says: ==================== net: ipa: fix warning-reported errors Building the kernel with W=1 produces numerous warnings for the IPA code. Some of those warnings turn out to flag real problems, and this series fixes them. The first patch fixes the most important ones, but the second and third are problems I think are worth treating as bugs as well. Note: I'll happily combine any of these if someone prefers that. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Alex Elder authored
Include "ipa_gsi.h" in "ipa_gsi.c", so the public functions are defined before they are used in "ipa_gsi.c". This addresses some warnings that are reported with a "W=1" build. Fixes: c3f398b1 ("soc: qcom: ipa: IPA interface to GSI") Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Alex Elder authored
Pointers to two struct types are used in "ipa_gsi.h", without those struct types being forward-declared. Add these declarations. Fixes: c3f398b1 ("soc: qcom: ipa: IPA interface to GSI") Signed-off-by:
-
Alex Elder authored
Building with "W=1" did exactly what it was supposed to do, namely point out some suspicious-looking code to be verified not to contain bugs. Some QMI message structures defined in "ipa_qmi_msg.c" contained some bad field names (duplicating the "elem_size" field instead of defining the "offset" field), almost certainly due to copy/paste errors that weren't obvious in a scan of the code. Fix these bugs. Fixes: 530f9216 ("soc: qcom: ipa: AP/modem communications") Signed-off-by:
-
- 06 Jul, 2020 10 commits
-
-
David Ahern authored
Brian reported a crash in IPv6 code when using rpfilter with a setup running FRR and external nexthop objects. The root cause of the crash is fib6_select_path setting fib6_nh in the result to NULL because of an improper check for nexthop objects. More specifically, rpfilter invokes ip6_route_lookup with flowi6_oif set causing fib6_select_path to be called with have_oif_match set. fib6_select_path has early check on have_oif_match and jumps to the out label which presumes a builtin fib6_nh. This path is invalid for nexthop objects; for external nexthops fib6_select_path needs to just return if the fib6_nh has already been set in the result otherwise it returns after the call to nexthop_path_fib6_result. Update the check on have_oif_match to not bail on external nexthops. Update selftests for this problem. Fixes: f88d8ea6 ("ipv6: Plumb support for nexthop object in a fib6_info") Reported-by:
Brian Rak <brak@choopa.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== net: hns3: fixes for -net There are some fixes about reset issue and a use-after-free of self-test. ==================== Signed-off-by: -
Yonglong Liu authored
Enable promisc mode of PF, set VF link state to enable, and run iperf of the VF, then do self test of the PF. The self test will fail with a low frequency, and may cause a use-after-free problem. [ 87.142126] selftest:000004a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [ 87.159722] ================================================================== [ 87.174187] BUG: KASAN: use-after-free in hex_dump_to_buffer+0x140/0x608 [ 87.187600] Read of size 1 at addr ffff003b22828000 by task ethtool/1186 [ 87.201012] [ 87.203978] CPU: 7 PID: 1186 Comm: ethtool Not tainted 5.5.0-rc4-gfd51c473-dirty #4 [ 87.219306] Hardware name: Huawei TaiShan 2280 V2/BC82AMDA, BIOS TA BIOS 2280-A CS V2.B160.01 01/15/2020 [ 87.238292] Call trace: [ 87.243173] dump_backtrace+0x0/0x280 [ 87.250491] show_stack+0x24/0x30 [ 87.257114] dump_stack+0xe8/0x140 [ 87.263911] print_address_description.isra.8+0x70/0x380 [ 87.274538] __kasan_report+0x12c/0x230 [ 87.282203] kasan_report+0xc/0x18 [ 87.288999] __asan_load1+0x60/0x68 [ 87.295969] hex_dump_to_buffer+0x140/0x608 [ 87.304332] print_hex_dump+0x140/0x1e0 [ 87.312000] hns3_lb_check_skb_data+0x168/0x170 [ 87.321060] hns3_clean_rx_ring+0xa94/0xfe0 [ 87.329422] hns3_self_test+0x708/0x8c0 The length of packet sent by the selftest process is only 128 + 14 bytes, and the min buffer size of a BD is 256 bytes, and the receive process will make sure the packet sent by the selftest process is in the linear part, so only check the linear part in hns3_lb_check_skb_data(). So fix this use-after-free by using skb_headlen() to dump skb->data instead of skb->len. Fixes: c39c4d98 ("net: hns3: Add mac loopback selftest support in hns3 driver") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Huazhong Tan authored
When unloading driver, if flag HNS3_NIC_STATE_INITED has been already cleared, the debugfs will not be uninitialized, so fix it. Fixes: b2292360 ("net: hns3: Add debugfs framework registration") Signed-off-by:
-
Huazhong Tan authored
When asserts VF reset fail, flag HCLGEVF_STATE_CMD_DISABLE and handshake status should not set, otherwise the retry will fail. So adds a check for asserting VF reset and returns directly when fails. Fixes: ef5f8e50 ("net: hns3: stop handling command queue while resetting VF") Signed-off-by:
-
Huazhong Tan authored
If there is a PF reset pending before FLR prepare, FLR's preparatory work will not fail, but the FLR rebuild procedure will fail for this pending. So this PF reset pending should be handled in the FLR preparatory. Fixes: 8627bded ("net: hns3: refactor the precedure of PF FLR") Signed-off-by:
-
David S. Miller authored
Andre Edich says: ==================== smsc95xx: fix smsc95xx_bind The patchset fixes two problems in the function smsc95xx_bind: - return of false success - memory leak Changes in v2: - added "Fixes" tags to both patches ==================== Signed-off-by: -
Andre Edich authored
In a case where the ID_REV register read is failed, the memory for a private data structure has to be freed before returning error from the function smsc95xx_bind. Fixes: bbd9f9ee ("smsc95xx: add wol support for more frame types") Signed-off-by:
Andre Edich <andre.edich@microchip.com> Signed-off-by:
Parthiban Veerasooran <Parthiban.Veerasooran@microchip.com> Signed-off-by:
-
Andre Edich authored
The return value of the function smsc95xx_reset() must be checked to avoid returning false success from the function smsc95xx_bind(). Fixes: 2f7ca802 ("net: Add SMSC LAN9500 USB2.0 10/100 ethernet adapter driver") Signed-off-by:
-
Xie He authored
When this driver transmits data, first this driver will remove a pseudo header of 1 byte, then the lapb module will prepend the LAPB header of 2 or 3 bytes, then this driver will prepend a length field of 2 bytes, then the underlying Ethernet device will prepend its own header. So, the header length required should be: -1 + 3 + 2 + "the header length needed by the underlying device". This patch fixes kernel panic when this driver is used with AF_PACKET SOCK_DGRAM sockets. Signed-off-by:
Xie He <xie.he.0141@gmail.com> Signed-off-by:
-
- 05 Jul, 2020 14 commits
-
-
David S. Miller authored
Taehee Yoo says: ==================== net: rmnet: fix interface leak for rmnet module There are two problems in rmnet module that they occur the leak of a lower interface. The symptom is the same, which is the leak of a lower interface. But there are two different real problems. This patchset is to fix these real problems. 1. Do not allow to have different two modes. As a lower interface of rmnet, there are two modes that they are VND and BRIDGE. One interface can have only one mode. But in the current rmnet, there is no code to prevent to have two modes in one lower interface. So, interface leak occurs. 2. Do not allow to add multiple bridge interfaces. rmnet can have only two bridge interface. If an additional bridge interface is tried to be attached, rmnet should deny it. But there is no code to do that. So, interface leak occurs. ==================== Signed-off-by: -
Taehee Yoo authored
rmnet can have only two bridge interface. One of them is a link interface and another one is added by the master operation. rmnet interface shouldn't allow adding additional bridge interfaces by mater operation. But, there is no code to deny additional interfaces. So, interface leak occurs. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add dummy2 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link set dummy1 master rmnet0 ip link set dummy2 master rmnet0 ip link del rmnet0 In the above test command, the dummy0 was attached to rmnet as VND mode. Then, dummy1 was attached to rmnet0 as BRIDGE mode. At this point, dummy0 mode is switched from VND to BRIDGE automatically. Then, dummy2 is attached to rmnet as BRIDGE mode. At this point, rmnet0 should deny this operation. But, rmnet0 doesn't deny this. So that below splat occurs when the rmnet0 interface is deleted. Splat looks like: [ 186.684787][ C2] WARNING: CPU: 2 PID: 1009 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0 [ 186.684788][ C2] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_x [ 186.684805][ C2] CPU: 2 PID: 1009 Comm: ip Not tainted 5.8.0-rc1+ #621 [ 186.684807][ C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 186.684808][ C2] RIP: 0010:rollback_registered_many+0x986/0xcf0 [ 186.684811][ C2] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 5 [ 186.684812][ C2] RSP: 0018:ffff8880cd9472e0 EFLAGS: 00010287 [ 186.684815][ C2] RAX: ffff8880cc56da58 RBX: ffff8880ab21c000 RCX: ffffffff9329d323 [ 186.684816][ C2] RDX: 1ffffffff2be6410 RSI: 0000000000000008 RDI: ffffffff95f32080 [ 186.684818][ C2] RBP: dffffc0000000000 R08: fffffbfff2be6411 R09: fffffbfff2be6411 [ 186.684819][ C2] R10: ffffffff95f32087 R11: 0000000000000001 R12: ffff8880cd947480 [ 186.684820][ C2] R13: ffff8880ab21c0b8 R14: ffff8880cd947400 R15: ffff8880cdf10640 [ 186.684822][ C2] FS: 00007f00843890c0(0000) GS:ffff8880d4e00000(0000) knlGS:0000000000000000 [ 186.684823][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 186.684825][ C2] CR2: 000055b8ab1077b8 CR3: 00000000ab612006 CR4: 00000000000606e0 [ 186.684826][ C2] Call Trace: [ 186.684827][ C2] ? lockdep_hardirqs_on_prepare+0x379/0x540 [ 186.684829][ C2] ? netif_set_real_num_tx_queues+0x780/0x780 [ 186.684830][ C2] ? rmnet_unregister_real_device+0x56/0x90 [rmnet] [ 186.684831][ C2] ? __kasan_slab_free+0x126/0x150 [ 186.684832][ C2] ? kfree+0xdc/0x320 [ 186.684834][ C2] ? rmnet_unregister_real_device+0x56/0x90 [rmnet] [ 186.684835][ C2] unregister_netdevice_many.part.135+0x13/0x1b0 [ 186.684836][ C2] rtnl_delete_link+0xbc/0x100 [ ... ] [ 238.440071][ T1009] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1 Fixes: 037f9cdf ("net: rmnet: use upper/lower device infrastructure") Signed-off-by:Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
There are two types of the lower interface of rmnet that are VND and BRIDGE. Each lower interface can have only one type either VND or BRIDGE. But, there is a case, which uses both lower interface types. Due to this unexpected behavior, lower interface leak occurs. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add rmnet0 link dummy0 type rmnet mux_id 1 ip link set dummy1 master rmnet0 ip link add rmnet1 link dummy1 type rmnet mux_id 2 ip link del rmnet0 The dummy1 was attached as BRIDGE interface of rmnet0. Then, it also was attached as VND interface of rmnet1. This is unexpected behavior and there is no code for handling this case. So that below splat occurs when the rmnet0 interface is deleted. Splat looks like: [ 53.254112][ C1] WARNING: CPU: 1 PID: 1192 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0 [ 53.254117][ C1] Modules linked in: rmnet dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nfx [ 53.254182][ C1] CPU: 1 PID: 1192 Comm: ip Not tainted 5.8.0-rc1+ #620 [ 53.254188][ C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.254192][ C1] RIP: 0010:rollback_registered_many+0x986/0xcf0 [ 53.254200][ C1] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 0f 0b e5 [ 53.254205][ C1] RSP: 0018:ffff888050a5f2e0 EFLAGS: 00010287 [ 53.254214][ C1] RAX: ffff88805756d658 RBX: ffff88804d99c000 RCX: ffffffff8329d323 [ 53.254219][ C1] RDX: 1ffffffff0be6410 RSI: 0000000000000008 RDI: ffffffff85f32080 [ 53.254223][ C1] RBP: dffffc0000000000 R08: fffffbfff0be6411 R09: fffffbfff0be6411 [ 53.254228][ C1] R10: ffffffff85f32087 R11: 0000000000000001 R12: ffff888050a5f480 [ 53.254233][ C1] R13: ffff88804d99c0b8 R14: ffff888050a5f400 R15: ffff8880548ebe40 [ 53.254238][ C1] FS: 00007f6b86b370c0(0000) GS:ffff88806c200000(0000) knlGS:0000000000000000 [ 53.254243][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.254248][ C1] CR2: 0000562c62438758 CR3: 000000003f600005 CR4: 00000000000606e0 [ 53.254253][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.254257][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.254261][ C1] Call Trace: [ 53.254266][ C1] ? lockdep_hardirqs_on_prepare+0x379/0x540 [ 53.254270][ C1] ? netif_set_real_num_tx_queues+0x780/0x780 [ 53.254275][ C1] ? rmnet_unregister_real_device+0x56/0x90 [rmnet] [ 53.254279][ C1] ? __kasan_slab_free+0x126/0x150 [ 53.254283][ C1] ? kfree+0xdc/0x320 [ 53.254288][ C1] ? rmnet_unregister_real_device+0x56/0x90 [rmnet] [ 53.254293][ C1] unregister_netdevice_many.part.135+0x13/0x1b0 [ 53.254297][ C1] rtnl_delete_link+0xbc/0x100 [ 53.254301][ C1] ? rtnl_af_register+0xc0/0xc0 [ 53.254305][ C1] rtnl_dellink+0x2dc/0x840 [ 53.254309][ C1] ? find_held_lock+0x39/0x1d0 [ 53.254314][ C1] ? valid_fdb_dump_strict+0x620/0x620 [ 53.254318][ C1] ? rtnetlink_rcv_msg+0x457/0x890 [ 53.254322][ C1] ? lock_contended+0xd20/0xd20 [ 53.254326][ C1] rtnetlink_rcv_msg+0x4a8/0x890 [ ... ] [ 73.813696][ T1192] unregister_netdevice: waiting for rmnet0 to become free. Usage count = 1 Fixes: 037f9cdf ("net: rmnet: use upper/lower device infrastructure") Signed-off-by: -
Taehee Yoo authored
To release hsr(upper) interface, it should release its own lower interfaces first. Then, hsr(upper) interface can be released safely. In the current code of error path of hsr_dev_finalize(), it releases hsr interface before releasing a lower interface. So, a warning occurs, which warns about the leak of lower interfaces. In order to fix this problem, changing the ordering of the error path of hsr_dev_finalize() is needed. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add dummy2 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 ip link add hsr1 type hsr slave1 dummy2 slave2 dummy0 Splat looks like: [ 214.923127][ C2] WARNING: CPU: 2 PID: 1093 at net/core/dev.c:8992 rollback_registered_many+0x986/0xcf0 [ 214.923129][ C2] Modules linked in: hsr dummy openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipx [ 214.923154][ C2] CPU: 2 PID: 1093 Comm: ip Not tainted 5.8.0-rc2+ #623 [ 214.923156][ C2] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 214.923157][ C2] RIP: 0010:rollback_registered_many+0x986/0xcf0 [ 214.923160][ C2] Code: 41 8b 4e cc 45 31 c0 31 d2 4c 89 ee 48 89 df e8 e0 47 ff ff 85 c0 0f 84 cd fc ff ff 5 [ 214.923162][ C2] RSP: 0018:ffff8880c5156f28 EFLAGS: 00010287 [ 214.923165][ C2] RAX: ffff8880d1dad458 RBX: ffff8880bd1b9000 RCX: ffffffffb929d243 [ 214.923167][ C2] RDX: 1ffffffff77e63f0 RSI: 0000000000000008 RDI: ffffffffbbf31f80 [ 214.923168][ C2] RBP: dffffc0000000000 R08: fffffbfff77e63f1 R09: fffffbfff77e63f1 [ 214.923170][ C2] R10: ffffffffbbf31f87 R11: 0000000000000001 R12: ffff8880c51570a0 [ 214.923172][ C2] R13: ffff8880bd1b90b8 R14: ffff8880c5157048 R15: ffff8880d1dacc40 [ 214.923174][ C2] FS: 00007fdd257a20c0(0000) GS:ffff8880da200000(0000) knlGS:0000000000000000 [ 214.923175][ C2] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 214.923177][ C2] CR2: 00007ffd78beb038 CR3: 00000000be544005 CR4: 00000000000606e0 [ 214.923179][ C2] Call Trace: [ 214.923180][ C2] ? netif_set_real_num_tx_queues+0x780/0x780 [ 214.923182][ C2] ? dev_validate_mtu+0x140/0x140 [ 214.923183][ C2] ? synchronize_rcu.part.79+0x85/0xd0 [ 214.923185][ C2] ? synchronize_rcu_expedited+0xbb0/0xbb0 [ 214.923187][ C2] rollback_registered+0xc8/0x170 [ 214.923188][ C2] ? rollback_registered_many+0xcf0/0xcf0 [ 214.923190][ C2] unregister_netdevice_queue+0x18b/0x240 [ 214.923191][ C2] hsr_dev_finalize+0x56e/0x6e0 [hsr] [ 214.923192][ C2] hsr_newlink+0x36b/0x450 [hsr] [ 214.923194][ C2] ? hsr_dellink+0x70/0x70 [hsr] [ 214.923195][ C2] ? rtnl_create_link+0x2e4/0xb00 [ 214.923197][ C2] ? __netlink_ns_capable+0xc3/0xf0 [ 214.923198][ C2] __rtnl_newlink+0xbdb/0x1270 [ ... ] Fixes: e0a4b997 ("hsr: use upper/lower device infrastructure") Reported-by: syzbot+7f1c020f68dab95aab59@syzkaller.appspotmail.com Signed-off-by: -
Luo bin authored
When sending mailbox in the work of aeq event, another aeq event will be triggered. because the last aeq work is not exited and only one work can be excuted simultaneously in the same workqueue, mailbox sending function will return failure of timeout. We create and use another workqueue to fix this. Signed-off-by:
Luo bin <luobin9@huawei.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Use kvfree() to release vmalloc()'ed areas in ipset, from Eric Dumazet. 2) UAF in nfnetlink_queue from the nf_conntrack_update() path. ==================== Signed-off-by: -
David S. Miller authored
Randy Dunlap says: ==================== Documentation: networking: eliminate doubled words Drop all duplicated words in Documentation/networking/ files. ==================== Signed-off-by: -
Randy Dunlap authored
Drop the doubled word "have". Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-doc@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Cc: David Howells <dhowells@redhat.com> Cc: linux-afs@lists.infradead.org Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "that". Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "that". Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "in". Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Randy Dunlap authored
Drop the doubled words "the" and "of". Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "and". Signed-off-by:
-
Randy Dunlap authored
Drop the doubled word "to". Signed-off-by:
-
- 03 Jul, 2020 2 commits
-
-
Toke Høiland-Jørgensen authored
There are a couple of places in net/sched/ that check skb->protocol and act on the value there. However, in the presence of VLAN tags, the value stored in skb->protocol can be inconsistent based on whether VLAN acceleration is enabled. The commit quoted in the Fixes tag below fixed the users of skb->protocol to use a helper that will always see the VLAN ethertype. However, most of the callers don't actually handle the VLAN ethertype, but expect to find the IP header type in the protocol field. This means that things like changing the ECN field, or parsing diffserv values, stops working if there's a VLAN tag, or if there are multiple nested VLAN tags (QinQ). To fix this, change the helper to take an argument that indicates whether the caller wants to skip the VLAN tags or not. When skipping VLAN tags, we make sure to skip all of them, so behaviour is consistent even in QinQ mode. To make the helper usable from the ECN code, move it to if_vlan.h instead of pkt_sched.h. v3: - Remove empty lines - Move vlan variable definitions inside loop in skb_protocol() - Also use skb_protocol() helper in IP{,6}_ECN_decapsulate() and bpf_skb_ecn_set_ce() v2: - Use eth_type_vlan() helper in skb_protocol() - Also fix code that reads skb->protocol directly - Change a couple of 'if/else if' statements to switch constructs to avoid calling the helper twice Reported-by:Ilya Ponetayev <i.ponetaev@ndmsystems.com> Fixes: d8b9605d ("net: sched: fix skb->protocol use in case of accelerated vlan path") Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by:
-
Pablo Neira Ayuso authored
__nf_conntrack_update() might refresh the conntrack object that is attached to the skbuff. Otherwise, this triggers UAF. [ 633.200434] ================================================================== [ 633.200472] BUG: KASAN: use-after-free in nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200478] Read of size 1 at addr ffff888370804c00 by task nfqnl_test/6769 [ 633.200487] CPU: 1 PID: 6769 Comm: nfqnl_test Not tainted 5.8.0-rc2+ #388 [ 633.200490] Hardware name: LENOVO 23259H1/23259H1, BIOS G2ET32WW (1.12 ) 05/30/2012 [ 633.200491] Call Trace: [ 633.200499] dump_stack+0x7c/0xb0 [ 633.200526] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200532] print_address_description.constprop.6+0x1a/0x200 [ 633.200539] ? _raw_write_lock_irqsave+0xc0/0xc0 [ 633.200568] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200594] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200598] kasan_report.cold.9+0x1f/0x42 [ 633.200604] ? call_rcu+0x2c0/0x390 [ 633.200633] ? nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200659] nf_conntrack_update+0x34e/0x770 [nf_conntrack] [ 633.200687] ? nf_conntrack_find_get+0x30/0x30 [nf_conntrack] Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1436 Fixes: ee04805f ("netfilter: conntrack: make conntrack userspace helpers work again") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
- 02 Jul, 2020 9 commits
-
-
Nicolas Ferre authored
I would like that Claudiu becomes co-maintainer of the Cadence macb driver. He's already participating to lots of reviews and enhancements to this driver and knows the different versions of this controller. Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
-
Codrin Ciubotariu authored
The number of ports is incorrectly set to the maximum available for a DSA switch. Even if the extra ports are not used, this causes some functions to be called later, like port_disable() and port_stp_state_set(). If the driver doesn't check the port index, it will end up modifying unknown registers. Fixes: b987e98e ("dsa: add DSA switch driver for Microchip KSZ9477") Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Reviewed-by:
-
Eric Dumazet authored
This essentially reverts commit 72123032 ("tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets") Mathieu reported that many vendors BGP implementations can actually switch TCP MD5 on established flows. Quoting Mathieu : Here is a list of a few network vendors along with their behavior with respect to TCP MD5: - Cisco: Allows for password to be changed, but within the hold-down timer (~180 seconds). - Juniper: When password is initially set on active connection it will reset, but after that any subsequent password changes no network resets. - Nokia: No notes on if they flap the tcp connection or not. - Ericsson/RedBack: Allows for 2 password (old/new) to co-exist until both sides are ok with new passwords. - Meta-Switch: Expects the password to be set before a connection is attempted, but no further info on whether they reset the TCP connection on a change. - Avaya: Disable the neighbor, then set password, then re-enable. - Zebos: Would normally allow the change when socket connected. We can revert my prior change because commit 9424e2e7 ("tcp: md5: fix potential overestimation of TCP option space") removed the leak of 4 kernel bytes to the wire that was the main reason for my patch. While doing my investigations, I found a bug when a MD5 key is changed, leading to these commits that stable teams want to consider before backporting this revert : Commit 6a2febec ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()") Commit e6ced831 ("tcp: md5: refine tcp_md5_do_add()/tcp_md5_hash_key() barriers") Fixes: 72123032 "tcp: md5: reject TCP_MD5SIG or TCP_MD5SIG_EXT on established sockets" Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by:
-
Helmut Grohne authored
The KSZ9893 3-Port Gigabit Ethernet Switch can be controlled via SPI, I²C or MDIO (very limited and not supported by this driver). While there is already a compatible entry for the SPI bus, it was missing for I²C. Signed-off-by:
Helmut Grohne <helmut.grohne@intenta.de> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
Whenever tcp_try_rmem_schedule() returns an error, we are under trouble and should make sure to wakeup readers so that they can drain socket queues and eventually make room. Fixes: 03f45c88 ("tcp: avoid extra wakeups for SO_RCVLOWAT users") Signed-off-by:
-
Willem de Bruijn authored
When no full socket is available, skbs are sent over a per-netns control socket. Its sk_mark is temporarily adjusted to match that of the real (request or timewait) socket or to reflect an incoming skb, so that the outgoing skb inherits this in __ip_make_skb. Introduction of the socket cookie mark field broke this. Now the skb is set through the cookie and cork: <caller> # init sockc.mark from sk_mark or cmsg ip_append_data ip_setup_cork # convert sockc.mark to cork mark ip_push_pending_frames ip_finish_skb __ip_make_skb # set skb->mark to cork mark But I missed these special control sockets. Update all callers of __ip(6)_make_skb that were originally missed. For IPv6, the same two icmp(v6) paths are affected. The third case is not, as commit 92e55f41 ("tcp: don't annotate mark on control socket from tcp_v6_send_response()") replaced the ctl_sk->sk_mark with passing the mark field directly as a function argument. That commit predates the commit that introduced the bug. Fixes: c6af0c22 ("ip: support SO_MARK cmsg") Signed-off-by:Willem de Bruijn <willemb@google.com> Reported-by:
Martin KaFai Lau <kafai@fb.com> Reviewed-by:
-
Eric Dumazet authored
Whenever cookie_init_timestamp() has been used to encode ECN,SACK,WSCALE options, we can not remove the TS option in the SYNACK. Otherwise, tcp_synack_options() will still advertize options like WSCALE that we can not deduce later when receiving the packet from the client to complete 3WHS. Note that modern linux TCP stacks wont use MD5+TS+SACK in a SYN packet, but we can not know for sure that all TCP stacks have the same logic. Before the fix a tcpdump would exhibit this wrong exchange : 10:12:15.464591 IP C > S: Flags [S], seq 4202415601, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val 456965269 ecr 0,nop,wscale 8], length 0 10:12:15.464602 IP S > C: Flags [S.], seq 253516766, ack 4202415602, win 65535, options [nop,nop,md5 valid,mss 1400,nop,nop,sackOK,nop,wscale 8], length 0 10:12:15.464611 IP C > S: Flags [.], ack 1, win 256, options [nop,nop,md5 valid], length 0 10:12:15.464678 IP C > S: Flags [P.], seq 1:13, ack 1, win 256, options [nop,nop,md5 valid], length 12 10:12:15.464685 IP S > C: Flags [.], ack 13, win 65535, options [nop,nop,md5 valid], length 0 After this patch the exchange looks saner : 11:59:59.882990 IP C > S: Flags [S], seq 517075944, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val 1751508483 ecr 0,nop,wscale 8], length 0 11:59:59.883002 IP S > C: Flags [S.], seq 1902939253, ack 517075945, win 65535, options [nop,nop,md5 valid,mss 1400,sackOK,TS val 1751508479 ecr 1751508483,nop,wscale 8], length 0 11:59:59.883012 IP C > S: Flags [.], ack 1, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508483 ecr 1751508479], length 0 11:59:59.883114 IP C > S: Flags [P.], seq 1:13, ack 1, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508483 ecr 1751508479], length 12 11:59:59.883122 IP S > C: Flags [.], ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508483 ecr 1751508483], length 0 11:59:59.883152 IP S > C: Flags [P.], seq 1:13, ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508484 ecr 1751508483], length 12 11:59:59.883170 IP C > S: Flags [.], ack 13, win 256, options [nop,nop,md5 valid,nop,nop,TS val 1751508484 ecr 1751508484], length 0 Of course, no SACK block will ever be added later, but nothing should break. Technically, we could remove the 4 nops included in MD5+TS options, but again some stacks could break seeing not conventional alignment. Fixes: 4957faad ("TCPCT part 1g: Responder Cookie => Initiator") Signed-off-by:
-
Rao Shoaib authored
In testing with mprds enabled, Oracle Cluster nodes after reboot were not able to communicate with others nodes and so failed to rejoin the cluster. Peers with lower IP address initiated connection but the node could not respond as it choose a different path and could not initiate a connection as it had a higher IP address. With this patch, when a node sends out a packet and the selected path is down, all other paths are also checked and any down paths are re-connected. Reviewed-by:
Ka-cheong Poon <ka-cheong.poon@oracle.com> Reviewed-by:
David Edmondson <david.edmondson@oracle.com> Signed-off-by:
Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com> Signed-off-by:
Rao Shoaib <rao.shoaib@oracle.com> Signed-off-by:
-
Eric Dumazet authored
My prior fix went a bit too far, according to Herbert and Mathieu. Since we accept that concurrent TCP MD5 lookups might see inconsistent keys, we can use READ_ONCE()/WRITE_ONCE() instead of smp_rmb()/smp_wmb() Clearing all key->key[] is needed to avoid possible KMSAN reports, if key->keylen is increased. Since tcp_md5_do_add() is not fast path, using __GFP_ZERO to clear all struct tcp_md5sig_key is simpler. data_race() was added in linux-5.8 and will prevent KCSAN reports, this can safely be removed in stable backports, if data_race() is not yet backported. v2: use data_race() both in tcp_md5_hash_key() and tcp_md5_do_add() Fixes: 6a2febec ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 01 Jul, 2020 1 commit
-
-
Sean Tranchetti authored
A potential deadlock can occur during registering or unregistering a new generic netlink family between the main nl_table_lock and the cb_lock where each thread wants the lock held by the other, as demonstrated below. 1) Thread 1 is performing a netlink_bind() operation on a socket. As part of this call, it will call netlink_lock_table(), incrementing the nl_table_users count to 1. 2) Thread 2 is registering (or unregistering) a genl_family via the genl_(un)register_family() API. The cb_lock semaphore will be taken for writing. 3) Thread 1 will call genl_bind() as part of the bind operation to handle subscribing to GENL multicast groups at the request of the user. It will attempt to take the cb_lock semaphore for reading, but it will fail and be scheduled away, waiting for Thread 2 to finish the write. 4) Thread 2 will call netlink_table_grab() during the (un)registration call. However, as Thread 1 has incremented nl_table_users, it will not be able to proceed, and both threads will be stuck waiting for the other. genl_bind() is a noop, unless a genl_family implements the mcast_bind() function to handle setting up family-specific multicast operations. Since no one in-tree uses this functionality as Cong pointed out, simply removing the genl_bind() function will remove the possibility for deadlock, as there is no attempt by Thread 1 above to take the cb_lock semaphore. Fixes: c380d9a7 ("genetlink: pass multicast bind/unbind to families") Suggested-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Johannes Berg <johannes.berg@intel.com> Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Sean Tranchetti <stranche@codeaurora.org> Signed-off-by:
-
