- 20 Dec, 2011 5 commits
-
-
Eliad Peller authored
dev_role_id only indicates whether the dev role is enabled, not started (e.g. on IBSS merge, the device role is enabled, but not started). Checking for any role in ROC (in order to determine whether dev role was started) is wrong as well, especially in multi-vif env. Check for started dev role only by checking the dev_hlid. Signed-off-by:
Eliad Peller <eliad@wizery.com> Signed-off-by:
Luciano Coelho <coelho@ti.com>
-
Eliad Peller authored
During sta disconnection, a deauth packet is being queued to the dev role queue. However, the dev role is being stopped before the packet was sent. Flush the tx queue before stopping the dev role. Signed-off-by:
-
Eliad Peller authored
This flag should be set per-vif, rather than globally. Rename the flag to indicate IN_USE (rather than IDLE), as in the default configuration (i.e. flag is clear) the vif should be idle. Change all the bit operations (and elp conditions) appropriately. Signed-off-by:
-
Eliad Peller authored
Since the conf_tx callback passes the vif as param, we must have been added first (and mac80211 verifies it). Remove the handling of such case. Signed-off-by:
-
Eliad Peller authored
Implement the change_interface callback by simply removing the current vif and adding a new one after updating the vif type. Signed-off-by:
-
- 19 Dec, 2011 35 commits
-
-
Yogesh Ashok Powar authored
The commit 42624d49 created following sparse warning >net/mac80211/sta_info.c:965:24: warning: incorrect type in assignment (different address spaces) >net/mac80211/sta_info.c:965:24: expected struct tid_ampdu_tx *tid_tx >net/mac80211/sta_info.c:965:24: got struct tid_ampdu_tx [noderef] <asn:4>*<noident> Making use of rcu_dereference_protected to fix the problem. V2: - Replacing rcu_dereference with rcu_dereference_protected as suggested by Johannes. - Adding mutex_lock/unlock to satisfy the condition at rcu_dereference_protected Cc: Nishant Sarmukadam <nishants@marvell.com> Reported-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Felix Fietkau authored
The commit "ath9k: simplify tx locking" introduced a soft lockup triggered by mac80211 sending a BAR frame triggered by a driver call to ieee80211_tx_send_bar or ieee80211_tx_status. Fix these issues by queueing processed tx status skbs and submitting them to mac80211 outside of the lock. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
Felix Fietkau authored
Many systems (e.g. embedded systems) do not have wifi modules connected to bluetooth modules, so bluetooth coexistence is irrelevant there. With the addition of MCI support, ath9k picked up quite a bit of extra code that can be compiled out this way. This patch redefines ATH9K_HW_CAP_MCI and adds an inline wrapper for querying the bluetooth coexistence scheme, allowing the compiler to eliminate code that uses it, with only very little use of #ifdef. On MIPS this reduces the total size for the modules by about 20k. Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Larry Finger authored
When I tested commit 6539306b, I did not notice that loading an out-of-tree module turns off lockdep testing in kernel 3.2. For that reason, I missed the kernel WARNING shown below: The solution fixes the warning by partially reverting commit 6539306b. [ 84.168146] ------------[ cut here ]------------ [ 84.168155] WARNING: at kernel/mutex.c:198 mutex_lock_nested+0x309/0x310() [ 84.168158] Hardware name: HP Pavilion dv2700 Notebook PC [ 84.168161] Modules linked in: nfs lockd auth_rpcgss nfs_acl sunrpc af_packet cpufreq_conservative cpufreq_userspace cpufreq_powersave powernow_k8 mperf e xt3 jbd ide_cd_mod cdrom snd_hda_codec_conexant arc4 rtl8192ce ide_pci_generic rtl8192c_common rtlwifi snd_hda_intel mac80211 snd_hda_codec snd_pcm snd_timer amd74xx ide_core cfg80211 k8temp snd joydev soundcore hwmon battery forcedeth i2c_nforce2 sg rfkill ac serio_raw snd_page_alloc button video i2c_core ipv6 a utofs4 ext4 mbcache jbd2 crc16 sd_mod ahci ohci_hcd libahci libata scsi_mod ehci_hcd usbcore usb_common fan processor thermal [ 84.168231] Pid: 1218, comm: kworker/u:2 Not tainted 3.2.0-rc5-wl+ #155 [ 84.168234] Call Trace: [ 84.168240] [<ffffffff81048aaa>] warn_slowpath_common+0x7a/0xb0 [ 84.168245] [<ffffffff81048af5>] warn_slowpath_null+0x15/0x20 [ 84.168249] [<ffffffff813811f9>] mutex_lock_nested+0x309/0x310 [ 84.168269] [<ffffffffa00793f9>] ? rtl_ips_nic_on+0x49/0xb0 [rtlwifi] [ 84.168277] [<ffffffffa00793f9>] rtl_ips_nic_on+0x49/0xb0 [rtlwifi] [ 84.168284] [<ffffffffa007ab85>] rtl_pci_tx+0x1b5/0x560 [rtlwifi] [ 84.168291] [<ffffffffa007635a>] rtl_op_tx+0x9a/0xa0 [rtlwifi] [ 84.168359] [<ffffffffa043cf51>] __ieee80211_tx+0x181/0x2b0 [mac80211] [ 84.168375] [<ffffffffa043ef06>] ieee80211_tx+0xf6/0x120 [mac80211] [ 84.168391] [<ffffffffa043ee49>] ? ieee80211_tx+0x39/0x120 [mac80211] [ 84.168408] [<ffffffffa043f80b>] ieee80211_xmit+0xdb/0x100 [mac80211] [ 84.168425] [<ffffffffa043f730>] ? ieee80211_skb_resize.isra.26+0xb0/0xb0 [mac80211] [ 84.168441] [<ffffffffa0440b2a>] ieee80211_tx_skb_tid+0x5a/0x70 [mac80211] [ 84.168458] [<ffffffffa0443da2>] ieee80211_send_auth+0x152/0x1b0 [mac80211] [ 84.168474] [<ffffffffa042e169>] ieee80211_work_work+0x1049/0x1860 [mac80211] [ 84.168489] [<ffffffffa042d120>] ? free_work+0x20/0x20 [mac80211] [ 84.168504] [<ffffffffa042d120>] ? free_work+0x20/0x20 [mac80211] [ 84.168510] [<ffffffff81065ffc>] process_one_work+0x17c/0x530 [ 84.168514] [<ffffffff81065f92>] ? process_one_work+0x112/0x530 [ 84.168519] [<ffffffff81066994>] worker_thread+0x164/0x350 [ 84.168524] [<ffffffff8108420d>] ? trace_hardirqs_on+0xd/0x10 [ 84.168528] [<ffffffff81066830>] ? manage_workers.isra.28+0x220/0x220 [ 84.168533] [<ffffffff8106bc17>] kthread+0x87/0x90 [ 84.168539] [<ffffffff813854b4>] kernel_thread_helper+0x4/0x10 [ 84.168543] [<ffffffff81382bdd>] ? retint_restore_args+0xe/0xe [ 84.168547] [<ffffffff8106bb90>] ? __init_kthread_worker+0x70/0x70 [ 84.168552] [<ffffffff813854b0>] ? gs_change+0xb/0xb [ 84.168554] ---[ end trace f25a4fdc768c028f ]--- Signed-off-by:
-
Franky Lin authored
This patch adds a Kconfig option for SDIO bus support and abstracts a build subset correspondingly. It's the final patch of fullmac bus interface refactoring. Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by:
Arend van Spriel <arend@broadcom.com> Reviewed-by:
Alwin Beukers <alwin@broadcom.com> Signed-off-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Franky Lin authored
This patch removes some headers files include lines from sdio layer code. This is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
The idle macros are only used by dhd_sdio.c. It's more appropriate to place them in dhd_sdio.c instead of dhd.h. Reviewed-by:
-
Franky Lin authored
Debug message level macros are used for debug purpose. It would be more appropriate to place them at dhd_dbg.h. Reviewed-by:
-
Franky Lin authored
Abstract bus layer brcmf_bus_txctl/brcmf_bus_rxctl function pointers for common layer. This patch is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
Abstract bus layer brcmf_bus_txdata function pointer for common layer. This patch is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
Abstract bus layer brcmf_bus_init function pointer for common layer. This patch is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
dhd_bus.h is the header file for bus interface. Move functions declarations and brcmf_bus structure to there. This is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
Common layer should use interface function pointer stored in brcmf_bus to invoke corresponding interface function in bus layer. This patch is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
dhd_bus.h will be used as the shared header file for common layer and bus layer. It should not contain any sdio specific macros. This patch moves them to sdio_host.h as part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
brcmf_sdio is the data structure for sdio bus layer. Stop referencing brcmf_sdio from common layer. This patch is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
brcmf_pub is the data structure for common layer. Since brcmf_bus should be the only structure shared by common layer and bus layer, stop referencing brcmf_pub from bus layer. This patch is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
txoff is the flow control flag for transmit used in sdio layer. Move it to bus layer data structure brcmf_sdio. Also flag management code is moved out of brcmf_txflowcontrol(). This is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
tx_realloc is used by both common layer and bus layer. This patch moves it to interface structure brcmf_bus as part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
Dongle statistics are shared data between common layer and bus layer. This patch places them in bus interface structure brcmf_bus as part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
Some dongle statistics are stored in two places and synced when net device status inquired. There is no need to do it this way any more. Direct all usage to dongle stats structure in order to increase readability. Reviewed-by:
-
Franky Lin authored
Driver up/down status to network interface need to be shared by common layer and bus layer. Move it to bus interface structure brcmf_bus as part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
maxctl is the max size of rxctl request from protocol layer to bus layer. Move it to bus interface structure brcmf_bus. This is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
Some statistics only used by sdio modules. Move them to sdio layer private structure brcmf_sdio. This is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
Change parameter to device pointer for bus layer interface function brcmf_proto_hdrpull This is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
Change parameter to device pointer for bus layer interface function brcmf_rx_frame. This is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
Change parameter to device pointer for bus layer interface function brcmf_c_prec_enq. This is part of the fullmac bus interface refactoring. Reviewed-by:
-
Franky Lin authored
Change parameter to device pointer for bus layer interface function brcmf_txcomplete. This is part of the fullmac bus interface refactoring. Reviewed-by:
-
