- 17 Aug, 2006 8 commits
-
-
Michael Chan authored
Convert dev_alloc_skb() to netdev_alloc_skb() and increase default rx ring size to 255. The old ring size of 100 was too small. Update version to 1.4.44. Signed-off-by:
Michael Chan <mchan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Fix a subtle race condition between bnx2_start_xmit() and bnx2_tx_int() similar to the one in tg3 discovered by Herbert Xu: CPU0 CPU1 bnx2_start_xmit() if (tx_ring_full) { tx_lock bnx2_tx() if (!netif_queue_stopped) netif_stop_queue() if (!tx_ring_full) update_tx_ring netif_wake_queue() tx_unlock } Even though tx_ring is updated before the if statement in bnx2_tx_int() in program order, it can be re-ordered by the CPU as shown above. This scenario can cause the tx queue to be stopped forever if bnx2_tx_int() has just freed up the entire tx_ring. The possibility of this happening should be very rare though. The following changes are made, very much identical to the tg3 fix: 1. Add memory barrier to fix the above race condition. 2. Eliminate the private tx_lock altogether and rely solely on netif_tx_lock. This eliminates one spinlock in bnx2_start_xmit() when the ring is full. 3. Because of 2, use netif_tx_lock in bnx2_tx_int() before calling netif_wake_queue(). 4. Add memory barrier to bnx2_tx_avail(). 5. Add bp->tx_wake_thresh which is set to half the tx ring size. 6. Check for the full wake queue condition before getting netif_tx_lock in tg3_tx(). This reduces the number of unnecessary spinlocks when the tx ring is full in a steady-state condition. Signed-off-by: -
Jan "Yenya" Kasprzak authored
this minor patch fixes the description of net.ipv4.tcp_mem sysctl in ip-sysctl.txt - the headline names the values "min, pressure, max", while the description uses the "low, pressure, high" values. Both tcp_rmem and tcp_wmem descriptions use the "min, pressure, max" values, so I have changed the tcp_mem to match this and not vice versa. Signed-off-by:
Jan "Yenya" Kasprzak <kas@fi.muni.cz> Signed-off-by:
-
Michal Ruzicka authored
There is a leak of a socket's multicast source filter list structure on closing a socket with a multicast source filter set on an interface that does not exist any more. Signed-off-by:
Michal Ruzicka <michal.ruzicka@comstar.cz> Acked-by:
David L Stevens <dlstevens@us.ibm.com> Signed-off-by:
-
Ingo Molnar authored
Split off __icmpv6_socket's sk->sk_dst_lock class, because it gets used from softirqs, which is safe for __icmpv6_sockets (because they never get directly used via userspace syscalls), but unsafe for normal sockets. Has no effect on non-lockdep kernels. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Andrew Morton authored
It needs netfilter_bridge.h for brnf_deferred_hooks Signed-off-by:
-
Suresh Siddha authored
On High end systems (1024 or so cpus) this can potentially cause stack overflow. Fix the stack usage. Signed-off-by:
Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by:
-
David S. Miller authored
Since __vlan_hwaccel_rx() is essentially bypassing the netif_receive_skb() call that would have occurred if we did the VLAN decapsulation in software, we are missing the skb_bond() call and the assosciated checks it does. Export those checks via an inline function, skb_bond_should_drop(), and use this in __vlan_hwaccel_rx(). Signed-off-by:
-
- 16 Aug, 2006 7 commits
-
-
-
Sam Ravnborg authored
Some architectures change $CC in arch/$(ARCH)/Makefile mips is one example. That have impact on what options are supported by gcc so move all $(call cc-option, ...) after include of arch specific Makefile. Signed-off-by:Sam Ravnborg <sam@ravnborg.org>
-
-
Heiko Carstens authored
Don't waste DMA capable pages for identity mapping page tables. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Peter Oberparleiter authored
In some situations PAV alias devices on LPAR are not accessible. The initialization procedure required to enable access to PAV alias devices has to be performed per storage server subsystem and not only once per storage server. Signed-off-by:
Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
The dasd_page_cache should return page addresses and therefore the cache must be created with an alignment of PAGE_SIZE. Signed-off-by:
-
Greg Kroah-Hartman authored
-
- 15 Aug, 2006 3 commits
-
-
Hans de Goede authored
There is a small but annoying bug in scripts/mod/file2alias.c which causes it to generate invalid aliases for input devices on 64 bit archs. This causes joydev.ko to not be automaticly loaded when inserting a joystick, resulting in a non working joystick (for the average user). In scripts/mod/file2alias.c is the following code for generating the input aliases: static void do_input(char *alias, kernel_ulong_t *arr, unsigned int min, unsigned int max) { unsigned int i; for (i = min; i < max; i++) if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG))) sprintf(alias + strlen(alias), "%X,*", i); } On 32 bits systems, this correctly generates "0,*" for the first alias, "8,*" for the second etc. However on 64 bits it generates: "0,*20,*" resp "8,*28,*" Notice how it adds 20 + first entry (hex) ! to the list of hex codes, which is 32 more then the first entry, thus is because the bit test above wraps at 32 bits instead of 64. scripts/mod/file2alias.c, line 379 reads: if (arr[i / BITS_PER_LONG] & (1 << (i%BITS_PER_LONG))) That should be: if (arr[i / BITS_PER_LONG] & (1L << (i%BITS_PER_LONG))) Notice the added 'L' after the 1, otherwise that is an 32 bit int instead of a 64 bit long, and when that int gets shifted >= 32 times, appearantly the number by which to shift is wrapped at 5 bits ( % 32) causing it to test a bit 32 bits too low. The patch below makes the nescesarry 1 char change :) Signed-off-by:Hans de Goede <j.w.r.degoede@hhs.nl> Acked-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
-
Matt LaPlante authored
Three typos in drivers/char/watchdog/Kconfig... Signed-off-by:
Matt LaPlante <kernel1@cyberdogtech.com> Signed-off-by:
Wim Van Sebroeck <wim@iguana.be>
-
- 14 Aug, 2006 21 commits
-
-
Trond Myklebust authored
fcntl(F_SETSIG) no longer works on leases because lease_release_private_callback() gets called as the lease is copied in order to initialise it. The problem is that lease_alloc() performs an unnecessary initialisation, which sets the lease_manager_ops. Avoid the problem by allocating the target lease structure using locks_alloc_lock(). Signed-off-by:
Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by:
-
Alexander Zarochentsev authored
Don't let fuse_readpages leave the @pages list not empty when exiting on error. [akpm@osdl.org: kernel-doc fixes] Signed-off-by:
Alexander Zarochentsev <zam@namesys.com> Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Signed-off-by:
-
Andrew Morton authored
Use a private lock instead. It protects all per-cpu data structures in workqueue.c, including the workqueues list. Fix a bug in schedule_on_each_cpu(): it was forgetting to lock down the per-cpu resources. Unfixed long-standing bug: if someone unplugs the CPU identified by `singlethread_cpu' the kernel will get very sick. Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Michal Januszewski authored
linux/backlight.h pulls in header files (eg. ioport.h) that break compilation of userspace programs. To solve the problem, only include backlight.h in fb.h if compiling kernel stuff. Signed-off-by:
Michal Januszewski <spock@gentoo.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
john stultz authored
We found this issue last week w/ the -RT kernel, but it seems the same issue is in mainline as well. Basically it is possible for futex_unlock_pi to return without actually freeing the lock. This is due to buggy logic in the use of futex_handle_fault() and its attempt argument in a failure case. Looking at futex.c the logic is as follows: 1) In futex_unlock_pi() we start w/ ret=0 and we go down to the first futex_atomic_cmpxchg_inatomic(), where we find uval==-EFAULT. We then jump to the pi_faulted label. 2) From pi_faulted: We increment attempt, unlock the sem and hit the retry label. 3) From the retry label, with ret still zero, we again hit EFAULT on the first futex_atomic_cmpxchg_inatomic(), and again goto the pi_faulted label. 4) Again from pi_faulted: we increment attempt and enter the conditional, where we call futex_handle_fault. 5) futex_handle_fault fails, and we goto the out_unlock_release_sem label. 6) From out_unlock_release_sem we return, and since ret is still zero, we return without error, while never actually unlocking the lock. Issue #1: at the first futex_atomic_cmpxchg_inatomic() we should probably be setting ret=-EFAULT before jumping to pi_faulted: However in our case this doesn't really affect anything, as the glibc we're using ignores the error value from futex_unlock_pi(). Issue #2: Look at futex_handle_fault(), its first conditional will return -EFAULT if attempt is >= 2. However, from the "if(attempt++) futex_handle_fault(attempt)" logic above, we'll *never* call futex_handle_fault when attempt is less then two. So we never get a chance to even try to fault the page in. The following patch addresses these two issues by 1) Always setting ret to -EFAULT if futex_handle_fault fails, and 2) Removing the = in futex_handle_fault's (attempt >= 2) check. I'm really not sure this is the right fix, but wanted to bring it up so folks knew the issue is alive and well in the current -git tree. From looking at the git logs the logic was first introduced (then later copied to other places) in the following commit almost a year ago: http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=4732efbeb997189d9f9b04708dc26bf8613ed721;hp=5b039e681b8c5f30aac9cc04385cc94be45d0823 Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Kirill Korotaev authored
sys_getppid() optimization can access a freed memory. On kernels with DEBUG_SLAB turned ON, this results in Oops. As Dave Hansen noted, this optimization is also unsafe for memory hotplug. So this patch always takes the lock to be safe. [oleg@tv-sign.ru: simplifications] Signed-off-by:
Kirill Korotaev <dev@openvz.org> Cc: <stable@kernel.org> Cc: Dave Hansen <haveblue@us.ibm.com> Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by:
-
Horms authored
Previously the message was "Fatal exception: panic_on_oops", as introduced in a recent patch whith removed a somewhat dangerous call to ssleep() in the panic_on_oops path. However, Paul Mackerras suggested that this was somewhat confusing, leadind people to believe that it was panic_on_oops that was the root cause of the fatal exception. On his suggestion, this patch changes the message to simply "Fatal exception". A suitable oops message should already have been displayed. Signed-off-by:
Simon Horman <horms@verge.net.au> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Michal Miroslaw authored
Fix BUG I tripped on while testing failover and multipathing. BUG shows up on error path in multipath_ctr() when parse_priority_group() fails after returning at least once without error. The fix is to initialize m->ti early - just after alloc()ing it. BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c027c3d2 *pde = 00000000 Oops: 0000 [#3] Modules linked in: qla2xxx ext3 jbd mbcache sg ide_cd cdrom floppy CPU: 0 EIP: 0060:[<c027c3d2>] Not tainted VLI EFLAGS: 00010202 (2.6.17.3 #1) EIP is at dm_put_device+0xf/0x3b eax: 00000001 ebx: ee4fcac0 ecx: 00000000 edx: ee4fcac0 esi: ee4fc4e0 edi: ee4fc4e0 ebp: 00000000 esp: c5db3e78 ds: 007b es: 007b ss: 0068 Process multipathd (pid: 15912, threadinfo=c5db2000 task=ef485a90) Stack: ec4eda40 c02816bd ee4fc4c0 00000000 f7e89498 f883e0bc c02816f6 f7e89480 f7e8948c c0281801 ffffffea f7e89480 f883e080 c0281ffe 00000001 00000000 00000004 dfe9cab8 f7a693c0 f883e080 f883e0c0 ca4b99c0 c027c6ee 01400000 Call Trace: <c02816bd> free_pgpaths+0x31/0x45 <c02816f6> free_priority_group+0x25/0x2e <c0281801> free_multipath+0x35/0x67 <c0281ffe> multipath_ctr+0x123/0x12d <c027c6ee> dm_table_add_target+0x11e/0x18b <c027e5b4> populate_table+0x8a/0xaf <c027e62b> table_load+0x52/0xf9 <c027ec23> ctl_ioctl+0xca/0xfc <c027e5d9> table_load+0x0/0xf9 <c0152146> do_ioctl+0x3e/0x43 <c0152360> vfs_ioctl+0x16c/0x178 <c01523b4> sys_ioctl+0x48/0x60 <c01029b3> syscall_call+0x7/0xb Code: 97 f0 00 00 00 89 c1 83 c9 01 80 e2 01 0f 44 c1 88 43 14 8b 04 24 59 5b 5e 5f 5d c3 53 89 c1 89 d3 ff 4a 08 0f 94 c0 84 c0 74 2a <8b> 01 8b 10 89 d8 e8 f6 fb ff ff 8b 03 8b 53 04 89 50 04 89 02 EIP: [<c027c3d2>] dm_put_device+0xf/0x3b SS:ESP 0068:c5db3e78 Signed-off-by:Michal Miroslaw <mirq-linux@rere.qmqm.pl> Acked-by:
Alasdair G Kergon <agk@redhat.com> Cc: <stable@kernel.org> Signed-off-by:
-
Andrew Morton authored
kernel/panic.c: In function 'add_taint': kernel/panic.c:176: warning: implicit declaration of function 'debug_locks_off' Cc: Andi Kleen <ak@muc.de> Signed-off-by:
-
Jan Blunck authored
The percpu variable is used incorrectly in switch_hrtimer_base(). Signed-off-by:
Jan Blunck <jblunck@suse.de> Acked-by:
-
Dan Bastone authored
Eric says: > I saw an oops down this path when trying to create a new file on a UDF > filesystem which was internally marked as readonly, but mounted rw: > > udf_create > udf_new_inode > new_inode > alloc_inode > udf_alloc_inode > udf_new_block > returns EIO due to readonlyness > iput (on error) I ran into the same issue today, but when listing a directory with invalid/corrupt entries: udf_lookup udf_iget get_new_inode_fast alloc_inode udf_alloc_inode __udf_read_inode fails for any reason iput (on error) ... The following patch to udf_alloc_inode() should take care of both (and other similar) cases, but I've only tested it with udf_lookup(). Signed-off-by:Dan Bastone <dan@pwienterprises.com> Cc: Eric Sandeen <sandeen@sandeen.net> Signed-off-by:
-
Andrew Morton authored
Don't use NULL as a printf control string. Fixes bug #6889. Cc: Ralph Corderoy <ralph@inputplus.co.uk> Signed-off-by:
-
Edgar Hucek authored
Add basic Machine detection to imacfb and some Ducumentation bits for imacfb. Signed-off-by:
Edgar Hucek <hostmaster@ed-soft.at> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Herbert Xu authored
The IPv4/IPv6 datagram output path was using skb_trim to trim paged packets because they know that the packet has not been cloned yet (since the packet hasn't been given to anything else in the system). This broke because skb_trim no longer allows paged packets to be trimmed. Paged packets must be given to one of the pskb_trim functions instead. This patch adds a new pskb_trim_unique function to cover the IPv4/IPv6 datagram output path scenario and replaces the corresponding skb_trim calls with it. Signed-off-by:
-
Mark Huang authored
Fix kernel panic on various SMP machines. The culprit is a null ub->skb in ulog_send(). If ulog_timer() has already been scheduled on one CPU and is spinning on the lock, and ipt_ulog_packet() flushes the queue on another CPU by calling ulog_send() right before it exits, there will be no skbuff when ulog_timer() acquires the lock and calls ulog_send(). Cancelling the timer in ulog_send() doesn't help because it has already been scheduled and is running on the first CPU. Similar problem exists in ebt_ulog.c and nfnetlink_log.c. Signed-off-by:
Mark Huang <mlhuang@cs.princeton.edu> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Patrick McHardy authored
Neither of {arp,ip,ip6}_tables cleans up behind itself when something goes wrong during initialization. Noticed by Rennie deGraaf <degraaf@cpsc.ucalgary.ca> Signed-off-by: -
Stephen Hemminger authored
Fix from Aji_Srinivas@emc.com, STP packets are incorrectly received on all LLC datagram sockets, whichever interface they are bound to. The llc_sap datagram receive logic sends packets with a unicast destination MAC to one socket bound to that SAP and MAC, and multicast packets to all sockets bound to that SAP. STP packets are multicast, and we do need to know on which interface they were received. Signed-off-by:
Stephen Hemminger <shemminger@osdl.org> Signed-off-by:
-
David S. Miller authored
If dst->obsolete is -1, this is a signal from the bundle creator that we want the XFRM dst and the dsts that it references to be validated on every use. I misunderstood this intention when I changed xfrm_dst_check() to always return NULL. Now, when we purge a dst entry, by running dst_free() on it. This will set the dst->obsolete to a positive integer, and we want to return NULL in that case so that the socket does a relookup for the route. Thus, if dst->obsolete<0, let stale_bundle() validate the state, else always return NULL. In general, we need to do things more intelligently here because we flush too much state during rule changes. Herbert Xu has some ideas wherein the key manager gives us some help in this area. We can also use smarter state management algorithms inside of the kernel as well. Signed-off-by: -
Patrick McHardy authored
Hashlimit doesn't account for the first packet, which is inconsistent with the limit match. Reported by ryan.castellucci@gmail.com, netfilter bugzilla #500. Signed-off-by:
-
Phil Oester authored
The xt_string match is broken with ! negation. This resolves a portion of netfilter bugzilla #497. Signed-off-by:
Phil Oester <kernel@linuxace.com> Signed-off-by:
-
David S. Miller authored
Somehow I clobbered James's original fix and only my subsequent compiler warning change went in for that changeset. Get the real fix in there. Noticed by Jesper Juhl. Signed-off-by:
-
- 11 Aug, 2006 1 commit
-
-
Orjan Friberg authored
In my quest to try and figure out why test 14 (control write) doesn't work with my EZ-USB board, I noticed that sometimes testusb reported no error even though the kernel log complained "byte 0 is 0 not 2" etc. Signed-off-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
