This commit adds support for ImgTec PowerDown Controller Watchdog Timer.
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Signed-off-by: Naidu Tellapati <Naidu.Tellapati@imgtec.com>
Signed-off-by: Jude Abraham <Jude.Abraham@imgtec.com>
[ezequiel: Minor style fixes]
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@imgtec.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Pull ARM SoC 64-bit changes and additions from Olof Johansson:
 "The 64-bit set of updates this release cycle adds support for three
  new platforms:

   - Samsunc Exynos 7
   - Freescale LS2085a
   - Mediatek MT8173

  For all these, the changes mostly consititude additions of DT
  contents, but also some Kconfig entries to allow dependency/selection
  of drivers per-platform, etc"

* tag '64bit-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  arm64: Kconfig: clean up two no-op Kconfig options from CONFIG_ARCH_TEGRA*
  arm64: Fix sort of platform Kconfig entries
  arm64: Add support for FSL's LS2085A SoC in Kconfig and defconfig
  arm64: Add DTS support for FSL's LS2085A SoC
  arm64: mediatek: Add MT8173 SoC Kconfig and defconfig
  arm64: dts: Add mediatek MT8173 SoC and evaluation board dts and Makefile
  Document: DT: Add bindings for mediatek MT8173 SoC Platform
  arm64: Add Tegra132 support
  arm64: Enable ARMv8 based exynos7 SoC support
  arm64: dts: Add nodes for mmc, i2c, rtc, watchdog, adc on exynos7
  arm64: dts: Add PMU DT node for exynos7 SoC
  arm64: dts: Add initial pinctrl support to exynos7
  arm64: dts: Add initial device tree support for exynos7

Pull ARM SoC defconfig changes from Olof Johansson:
 "Most of these changes are to enable new drivers that have been merged,
  or various additions to make defconfigs more useful.  There's also a
  set of patches trimming down omap2plus kernel size a bit since it is
  quite large"

* tag 'defconfig-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: config: add DEVTMPFS option by default to keystone config
  ARM: multi_v7_defconfig: Enable Exynos5420 Multi-Cluster PM support
  ARM: shmobile: Select CONFIG_REGULATOR in defconfig once again
  ARM: exynos_defconfig: Enable CONFIG_FHANDLE
  ARM: exynos_defconfig: Enable PMIC and MUIC drivers for Gears and Trats2
  ARM: exynos_defconfig: Enable CONFIG_LOCKUP_DETECTOR
  ARM: config: enable ARCH_HIP01
  ARM: omap2plus_defconfig: Enable OHCI & EHCI HCD support
  ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform
  ARM: imx_v6_v7_defconfig: enable more USB functions
  ARM: imx_v6_v7_defconfig: Select CONFIG_FB_MXS
  ARM: omap2plus_defconfig: Enable pcf857x
  ARM: omap2plus_defconfig: Add NOR flash support
  ARM: omap2plus_defconfig: Enable support for davinci_emac
  ARM: multi_v7_defconfig: Enable MiPHY28lp - ST's Generic (SATA, PCIe & USB3) PHY
  ARM: efm32: update defconfig
  ARM: at91: sama5: enable atmel-isi and ov2640 in defconfig
  ARM: multi_v7_defconfig: Enable Hip01 platform
  ARM: config: multi_v7: Update it for Keystone defconfig
  ARM: shmobile: Enable kzm9g board in multiplatform defconfig
  ...

Pull ARM SoC driver updates from Olof Johansson:
 "These are changes for drivers that are intimately tied to some SoC and
  for some reason could not get merged through the respective subsystem
  maintainer tree.

  This time around, much of this is for at91, with the bulk of it being
  syscon and udc drivers.

  Also, there's:
   - coupled cpuidle support for Samsung Exynos4210
   - Renesas 73A0 common-clk work
   - of/platform changes to tear down DMA mappings on device destruction
   - a few updates to the TI Keystone knav code"

* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (26 commits)
  cpuidle: exynos: add coupled cpuidle support for exynos4210
  ARM: EXYNOS: apply S5P_CENTRAL_SEQ_OPTION fix only when necessary
  soc: ti: knav_qmss_queue: change knav_range_setup_acc_irq to static
  soc: ti: knav_qmss_queue: makefile tweak to build as dynamic module
  pcmcia: at91_cf: depend on !ARCH_MULTIPLATFORM
  soc: ti: knav_qmss_queue: export API calls for use by user driver
  of/platform: teardown DMA mappings on device destruction
  usb: gadget: at91_udc: Allocate udc instance
  usb: gadget: at91_udc: Update DT binding documentation
  usb: gadget: at91_udc: Rework for multi-platform kernel support
  usb: gadget: at91_udc: Simplify probe and remove functions
  usb: gadget: at91_udc: Remove non-DT handling code
  usb: gadget: at91_udc: Document DT clocks and clock-names property
  usb: gadget: at91_udc: Drop uclk clock
  usb: gadget: at91_udc: Fix clock names
  mfd: syscon: Add Atmel SMC binding doc
  mfd: syscon: Add atmel-smc registers definition
  mfd: syscon: Add Atmel Matrix bus DT binding documentation
  mfd: syscon: Add atmel-matrix registers definition
  clk: shmobile: fix sparse NULL pointer warning
  ...

Pull ARM SoC DT updates from Olof Johansson:
 "DT changes continue to be the bulk of our merge window contents.

  We continue to have a large set of changes across the board as new
  platforms and drivers are added.

  Some of the new platforms are:
   - Alphascale ASM9260
   - Marvell Armada 388
   - CSR Atlas7
   - TI Davinci DM816x
   - Hisilicon HiP01
   - ST STiH418

  There have also been some sweeping changes, including relicensing of
  DTS contents from GPL to GPLv2+/X11 so that the same files can be
  reused in other non-GPL projects more easily.  There's also been
  changes to the DT Makefile to make it a little less conflict-ridden
  and churny down the road"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (330 commits)
  ARM: dts: Add PPMU node for exynos4412-trats2
  ARM: dts: Add PPMU node for exynos3250-monk and exynos3250-rinato
  ARM: dts: Add PPMU dt node for exynos4 and exynos4210
  ARM: dts: Add PPMU dt node for exynos3250
  ARM: dts: add mipi dsi device node for exynos4415
  ARM: dts: add fimd device node for exynos4415
  ARM: dts: Add syscon phandle to the video-phy node for Exynos4
  ARM: dts: Add sound nodes for exynos4412-trats2
  ARM: dts: Fix CLK_MOUT_CAMn parent clocks assignment for exynos4412-trats2
  ARM: dts: Fix CLK_UART_ISP_SCLK clock assignment in exynos4x12.dtsi
  ARM: dts: Add max77693 charger node for exynos4412-trats2
  ARM: dts: Switch max77686 regulators to GPIO control for exynos4412-trats2
  ARM: dts: Add suspend configuration for max77686 regulators for exynos4412-trats2
  ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2
  ARM: dts: am57xx-beagle-x15: Fix USB2 mode
  ARM: dts: am57xx-beagle-x15: Add extcon nodes for USB
  ARM: dts: dra72-evm: Add extcon nodes for USB
  ARM: dts: dra7-evm: Add extcon nodes for USB
  ARM: dts: rockchip: move the hdmi ddc-i2c-bus property to the actual boards
  ARM: dts: rockchip: enable vops and hdmi output on rk3288-firefly and -evb
  ...

Pull ARM SoC platform changes from Olof Johansson:
 "New and updated SoC support.  Also included are some cleanups where
  the platform maintainers hadn't separated cleanups from new developent
  in separate branches.

  Some of the larger things worth pointing out:

   - A large set of changes from Alexandre Belloni and Nicolas Ferre
     preparing at91 platforms for multiplatform and cleaning up quite a
     bit in the process.

   - Removal of CSR's "Marco" SoC platform that never made it out to the
     market.  We love seeing these since it means the vendor published
     support before product was out, which is exactly what we want!

  New platforms this release are:

   - Conexant Digicolor (CX92755 SoC)
   - Hisilicon HiP01 SoC
   - CSR/sirf Atlas7 SoC
   - ST STiH418 SoC
   - Common code changes for Nvidia Tegra132 (64-bit SoC)

  We're seeing more and more platforms having a harder time labelling
  changes as cleanups vs new development -- which is a good sign that
  we've come quite far on the cleanup effort.  So over time we might
  start combining the cleanup and new-development branches more"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (124 commits)
  ARM: at91/trivial: unify functions and machine names
  ARM: at91: remove at91_dt_initialize and machine init_early()
  ARM: at91: change board files into SoC files
  ARM: at91: remove at91_boot_soc
  ARM: at91: move alternative initial mapping to board-dt-sama5.c
  ARM: at91: merge all SOC_AT91SAM9xxx
  ARM: at91: at91rm9200: set idle and restart from rm9200_dt_device_init()
  ARM: digicolor: select syscon and timer
  ARM: zynq: Simplify SLCR initialization
  ARM: zynq: PM: Fixed simple typo.
  ARM: zynq: Setup default gpio number for Xilinx Zynq
  ARM: digicolor: add low level debug support
  ARM: initial support for Conexant Digicolor CX92755 SoC
  ARM: OMAP2+: Add dm816x hwmod support
  ARM: OMAP2+: Add clock domain support for dm816x
  ARM: OMAP2+: Add board-generic.c entry for ti81xx
  ARM: at91: pm: remove warning to remove SOC_AT91SAM9263 usage
  ARM: at91: remove unused mach/system_rev.h
  ARM: at91: stop using HAVE_AT91_DBGUx
  ARM: at91: fix ordering of SRAM and PM initialization
  ...

Pull ARM SoC cleanups from Olof Johansson:
 "This is a good healthy set of various code removals.  Total net delta
  is 8100 lines removed.

  Among the larger cleanups are:

   - Removal of old Samsung S3C DMA infrastructure by Arnd
   - Removal of the non-DT version of the 'lager' board by Magnus Damm
   - General stale code removal on OMAP and Davinci by Rickard Strandqvist
   - Removal of non-DT support on am3517 platforms by Tony Lindgren

  ... plus several other cleanups of various platforms across the board"

* tag 'cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (47 commits)
  ARM: sirf: drop redundant function and marco declaration
  arm: omap: specify PMUs are for ARMv7 CPUs
  arm: shmobile: specify PMUs are for ARMv7 CPUs
  arm: iop: specify PMUs are for XScale CPUs
  arm: pxa: specify PMUs are for XScale CPUs
  arm: realview: specify PMU types
  ARM: SAMSUNG: remove unused DMA infrastructure
  ARM: OMAP3: Add back Kconfig option MACH_OMAP3517EVM for ASoC
  ARM: davinci: Remove CDCE949 driver
  ARM: at91: remove useless at91rm9200_set_type()
  ARM: at91: remove useless at91rm9200_dt_initialize()
  ARM: at91: move debug-macro.S into the common space
  ARM: at91: remove useless at91_sysirq_mask_rtx
  ARM: at91: remove useless config MACH_AT91SAM9_DT
  ARM: at91: remove useless config MACH_AT91RM9200_DT
  ARM: at91: remove unused mach/memory.h
  ARM: at91: remove useless header file includes
  ARM: at91: remove unneeded header file
  rtc: at91/Kconfig: remove useless options
  ARM: at91/Documentation: add a README for Atmel SoCs
  ...

Merge tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC non-critical fixes from Olof Johansson:
 "Here's a small collection of fixes accrued during the last release
  that weren't considered severe enough to merge during the -rc series.

  A few of these are around resurrecting TI81xx support that's been
  broken for quite a while, the rest are smaller fixes -- most for PXA
  but a few across the board.

  There are also some updates to MAINTAINERS here, in particular for
  Broadcom platforms"

* tag 'fixes-non-critical-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
  MAINTAINERS: fix git repositories for Broadcom SoCs
  ARM: pxa: fix broken isa interrupts for zeus and viper
  ARM: DRA7: hwmod: Fix boot crash with DEBUG_LL enabled on UART3
  ARM: OMAP: DRA7: hwmod: Make gpmc software supervised as the smart idle is broken
  ARM: AM43xx: hwmod: set DSS submodule parent hwmods
  ARM: OMAP2+: hwmod: print error if wait_target_ready() failed
  MAINTAINERS: add maintainer for OMAP hwmod data
  ARM: OMAP2+: Disable omap3 PM init for ti81xx
  ARM: OMAP2+: Fix reboot for 81xx
  ARM: OMAP2+: Fix dm814 and dm816 for clocks and timer init
  ARM: OMAP2+: Fix ti81xx class type
  ARM: OMAP2+: Fix ti81xx devtype
  ARM: OMAP2+: Fix error handling for omap2_clk_enable_init_clocks
  MAINTAINERS: add a git entry for BMIPS-based BCM7xxx SoCs
  MAINTAINERS: add a git entry for BCM7xxx ARM-based SoCs
  MAINTAINERS: update Broadcom Cygnus SoC git tree
  MAINTAINERS: move BCM63xx ARM-based SoCs git tree
  hx4700: regulator: declare full constraints
  ARM: pxa: add regulator_has_full_constraints to spitz board file
  ARM: pxa: add regulator_has_full_constraints to poodle board file
  ...

Merge fifth set of updates from Andrew Morton:

 - A few things which were awaiting merges from linux-next:
     - rtc
     - ocfs2
     - misc others

 - Willy's "dax" feature: direct fs access to memory (mainly NV-DIMMs)
   which isn't backed by pageframes.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (37 commits)
  rtc: add driver for DS1685 family of real time clocks
  MAINTAINERS: add entry for Maxim PMICs on Samsung boards
  lib/Kconfig: use bool instead of boolean
  powerpc: drop _PAGE_FILE and pte_file()-related helpers
  ocfs2: set append dio as a ro compat feature
  ocfs2: wait for orphan recovery first once append O_DIRECT write crash
  ocfs2: complete the rest request through buffer io
  ocfs2: do not fallback to buffer I/O write if appending
  ocfs2: allocate blocks in ocfs2_direct_IO_get_blocks
  ocfs2: implement ocfs2_direct_IO_write
  ocfs2: add orphan recovery types in ocfs2_recover_orphans
  ocfs2: add functions to add and remove inode in orphan dir
  ocfs2: prepare some interfaces used in append direct io
  MAINTAINERS: fix spelling mistake & remove trailing WS
  dax: does not work correctly with virtual aliasing caches
  brd: rename XIP to DAX
  ext4: add DAX functionality
  dax: add dax_zero_page_range
  ext2: get rid of most mentions of XIP in ext2
  ext2: remove ext2_aops_xip
  ...

This adds a driver for the Dallas/Maxim DS1685-family of RTC chips.  It
supports the DS1685/DS1687, DS1688/DS1691, DS1689/DS1693, DS17285/DS17287,
DS17485/DS17487, and DS17885/DS17887 RTC chips.  These chips are commonly
found in SGI O2 and SGI Octane systems.  It was originally derived from a
driver patch submitted by Matthias Fuchs many years ago for use in
EPPC-405-UC modules, which also used these RTCs.  In addition to the
time-keeping functions, this RTC also handles the shutdown mechanism of
the O2 and Octane and acts as a partial NVRAM for the boot PROMS in these
systems.

Verified on both an SGI O2 and an SGI Octane.
Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add myself and Chanwoo Choi as supporters to help in reviewing patches
for Maxim 77686 PMIC and Maxim 14577/77693 MUIC drivers:
 - mfd (all of them),
 - extcon (extcon-max14577.c, extcon-max77693.c),
 - regulator (all of them),
 - clock (clk-max77686.c),
 - RTC (rtc-max77686.c).

Lately I am the author of contributors to them. These drivers are used
on Exynos-based boards (Trats 2, Gear 1 and Gear 2).
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Chanwoo Choi <cw00.choi@samsung.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Lee Jones <lee.jones@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mike Turquette <mturquette@linaro.org>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Keyword 'boolean' for type definition attributes is considered
deprecated and, therefore, should not be used anymore.

See http://lkml.kernel.org/r/cover.1418003065.git.cj@linux.com
See http://lkml.kernel.org/r/1419108071-11607-1-git-send-email-cj@linux.comSigned-off-by: Christoph Jaeger <cj@linux.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We've replaced remap_file_pages(2) implementation with emulation.  Nobody
creates non-linear mapping anymore.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Intruduce a bit OCFS2_FEATURE_RO_COMPAT_APPEND_DIO and check it in
write flow. If the bit is not set, fall back to the old way.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If one node has crashed with orphan entry leftover, another node which do
append O_DIRECT write to the same file will override the
i_dio_orphaned_slot.  Then the old entry won't be cleaned forever.  If
this case happens, we let it wait for orphan recovery first.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Complte the rest request thourgh buffer io after direct write performed.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Now we can do direct io and do not fallback to buffered IO any more in
case of append O_DIRECT write.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow blocks allocation in ocfs2_direct_IO_get_blocks.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Implement ocfs2_direct_IO_write.  Add the inode to orphan dir first, and
then delete it once append O_DIRECT finished.

This is to make sure block allocation and inode size are consistent.

[akpm@linux-foundation.org: fix it for "block: Add discard flag to blkdev_issue_zeroout() function"]
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Define two orphan recovery types, which indicates if need truncate file or
not.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add functions to add inode to orphan dir and remove inode in orphan dir.
Here we do not call ocfs2_prepare_orphan_dir and ocfs2_orphan_add
directly.  Because append O_DIRECT will add inode to orphan two and may
result in more than one orphan entry for the same inode.

[akpm@linux-foundation.org: avoid dynamic stack allocation]
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: alex chen <alex.chen@huawei.com>
Cc: Fengguang Wu <fengguang.wu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently in case of append O_DIRECT write (block not allocated yet),
ocfs2 will fall back to buffered I/O.  This has some disadvantages.
Firstly, it is not the behavior as expected.  Secondly, it will consume
huge page cache, e.g.  in mass backup scenario.  Thirdly, modern
filesystems such as ext4 support this feature.

In this patch set, the direct I/O write doesn't fallback to buffer I/O
write any more because the allocate blocks are enabled in direct I/O now.

This patch (of 9):

Prepare some interfaces which will be used in append O_DIRECT write.
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Weiwei Wang <wangww631@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Xuejiufei <xuejiufei@huawei.com>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: alex chen <alex.chen@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Akash Shende <akash0x53s@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The DAX code accesses the underlying storage through the kernel's linear
mapping, which may not be cache-coherent with user mappings on ARM, MIPS
or SPARC.  Temporarily disable the DAX code until this problem is
resolved.

The original XIP code also had this problem, but it was never noticed.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since this is relating to FS_XIP, not KERNEL_XIP, it should be called
DAX instead of XIP.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is a port of the DAX functionality found in the current version of
ext2.

[matthew.r.wilcox@intel.com: heavily tweaked]
[akpm@linux-foundation.org: remap_pages went away]
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This new function allows us to support hole-punch for DAX files by zeroing
a partial page, as opposed to the dax_truncate_page() function which can
only truncate to the end of the page.  Reimplement dax_truncate_page() to
call dax_zero_page_range().

[ross.zwisler@linux.intel.com: ported to 3.13-rc2]
[akpm@linux-foundation.org: fix typos in comments]
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

To help people transition, accept the 'xip' mount option (and report it in
/proc/mounts), but print a message encouraging people to switch over to
the 'dax' option.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We shouldn't need a special address_space_operations any more
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The fewer Kconfig options we have the better.  Use the generic
CONFIG_FS_DAX to enable XIP support in ext2 as well as in the core.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

These files are now empty, so delete them
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Replace ext2_use_xip() with test_opt(XIP) which expands to the same code
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Jan Kara pointed out that calling ext2_xip_verify_sb() in ext2_remount()
doesn't make sense, since changing the XIP option on remount isn't
allowed.  It also doesn't make sense to re-check whether blocksize is
supported since it can't change between mounts.

Replace the call to ext2_xip_verify_sb() in ext2_fill_super() with the
equivalent check and delete the definition.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

All callers of get_xip_mem() are now gone.  Remove checks for it,
initialisers of it, documentation of it and the only implementation of it.
 Also remove mm/filemap_xip.c as it is now empty.  Also remove
documentation of the long-gone get_xip_page().
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Based on the original XIP documentation, this documents the current state
of affairs, and includes instructions on how users can enable DAX if their
devices and kernel support it.
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It takes a get_block parameter just like nobh_truncate_page() and
block_truncate_page()
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Instead of calling aops->get_xip_mem from the fault handler, the
filesystem passes a get_block_t that is used to find the appropriate
blocks.

This requires that all architectures implement copy_user_page().  At the
time of writing, mips and arm do not.  Patches exist and are in progress.

[akpm@linux-foundation.org: remap_file_pages went away]
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is practically generic code; other filesystems will want to call it
from other places, but there's nothing ext2-specific about it.

Make it a little more generic by allowing it to take a count of the number
of bytes to zero rather than fixing it to a single page.  Thanks to Dave
Hansen for suggesting that I need to call cond_resched() if zeroing more
than one page.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use the generic AIO infrastructure instead of custom read and write
methods.  In addition to giving us support for AIO, this adds the missing
locking between read() and truncate().
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use an inode flag to tag inodes which should avoid using the page cache.
Convert ext2 to use it instead of mapping_is_xip().  Prevent I/Os to files
tagged with the DAX flag from falling back to buffered I/O.
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>