- 20 Sep, 2011 7 commits
-
-
Ilan Elias authored
Signed-off-by:
Ilan Elias <ilane@ti.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
Ilan Elias authored
The NFC Controller Interface (NCI) is a standard communication protocol between an NFC Controller (NFCC) and a Device Host (DH), defined by the NFC Forum. Signed-off-by:
-
Ilan Elias authored
The file nfc.h was moved from include/net to include/net/nfc, since new NFC header files will be added to include/net/nfc. Signed-off-by:
-
Ilan Elias authored
Add 2 new nfc control operations: dev_up to turn on the nfc device dev_down to turn off the nfc device Signed-off-by:
-
Alexander Simon authored
Signed-off-by:
Alexander Simon <an.alexsimon@googlemail.com> Signed-off-by:
-
Rajkumar Manoharan authored
cfg80211_conn_scan allows disabled channels at scan request. Hence probe request was seen at the disabled one. This patch ensures that disabled channel never be added into the scan request's channel list. Acked-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
Rajkumar Manoharan <rmanohar@qca.qualcomm.com> Signed-off-by:
-
git://git.infradead.org/users/linville/wirelessJohn W. Linville authored
Conflicts: drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-pcie-tx.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
-
- 19 Sep, 2011 33 commits
-
-
Jouni Malinen authored
When the driver (or most likely firmware) decides which AP to use for roaming based on internal scan result processing, user space needs to be notified of PMKSA caching candidates to allow RSN pre-authentication to be used. Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Mohammed Shafi Shajakhan authored
Signed-off-by:
Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com> Signed-off-by:
-
Johannes Berg authored
The IBSS BSSID is never validated, so an invalid one might end up being used. Fix this by rejecting invalid configuration. Reported-by:
Marek Lindner <lindner_marek@yahoo.de> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
They have been taken from brcmsmac, add Broadcom's copyright. Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rajkumar Manoharan authored
The commit "mac80211: stop tx before doing hw config and rate update" stops the tx queue and call drv_flush so frequently whenever a beacon got received with 11n htcap. This leads to massive "Failed to stop TX DMA" logspam on embedded hw. So the queue stop and flush should be called if and only if there is a change in the channel type. Reported-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
Wey-Yi Guy authored
re-apply the unsigned shorts bug fixed by Dan Carpenter but get lost after the file move. Signed-off-by:
Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by:
-
Wey-Yi Guy authored
Same stack corruption problem as temperature offset Signed-off-by:
-
Johannes Berg authored
Since the dawn of its time, iwlwifi has used interruptible waits to wait for synchronous commands and firmware loading. This leads to "interesting" bugs, because it can't actually handle the interruptions; for example when a command sending is interrupted it will assume the command completed fully, and then leave it pending, which leads to all kinds of trouble when the command finishes later. Since there's no easy way to gracefully deal with interruptions, fix the driver to not use interruptible waits. This at least fixes the error iwlagn 0000:02:00.0: Error: Response NULL in 'REPLY_SCAN_ABORT_CMD' I have seen in P2P testing, but it is likely that there are other errors caused by this. Cc: Stanislaw Gruszka <sgruszka@redhat.com> Cc: stable@kernel.org [2.6.24+] Signed-off-by:
-
Wey-Yi Guy authored
For retrieve calibration hdr related information, instead of using structure in one place and #define in other place, unify the method to use data structure. Signed-off-by:
-
Wey-Yi Guy authored
For 2000 series of NICs, version 2 of temperature offset calibration should be used. Signed-off-by:
-
Johannes Berg authored
Since the removal of the sysfs files, it is no longer necessary to have upper layers control the drvdata, so let the PCI driver have it for itself completely. Signed-off-by:
-
Johannes Berg authored
The debug_level and temperature files should be in debugfs, the txpower file is completely unneeded since TX power can be set with iw/iwconfig. Signed-off-by:
-
Johannes Berg authored
iwl_suspend and iwl_resume don't exist. Signed-off-by:
-
Johannes Berg authored
There's nothing PCI(E) specific in this file. Signed-off-by:
-
Johannes Berg authored
The transport callbacks might as well be undefined when CONFIG_PM_SLEEP is not set, so ifdef all of it out and make everything available for PM_SLEEP only. Signed-off-by:
-
Johannes Berg authored
Signed-off-by:
-
Johannes Berg authored
There's no need to have the transport layer have a callback for iwl_trans_send_cmd_pdu() since it is just a generic wrapper around iwl_trans_send_cmd(). Signed-off-by:
-
Johannes Berg authored
Move all the PCI-E specific transport files to be iwl-trans-pcie*; specifically iwl-trans.c which is really iwl-trans-pcie.c. Signed-off-by:
-
Wey-Yi Guy authored
After driver split and no need to support legacy devices, there is no reason we need to separate the NVM access into different files, merge those. Signed-off-by:
-
Emmanuel Grumbach authored
From time to time, we hit a WARN_ON in iwl_mac_remove_interface. This basically means that we got out of sync with mac80211: the vif we hold differs from the vif 80211 passes as parameter. Try to get some data that will help to debug this. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Don Fry authored
All devices use the same value for beacon_time_tsf_bits. Use the #define Signed-off-by:
Don Fry <donald.h.fry@intel.com> Signed-off-by:
-
Fry, Donald H authored
chain_noise_num_beacons is set and never changes. Use the #define rather than 3 levels of indirection. Signed-off-by:
-
Fry, Donald H authored
The modinfo report for 135 ucode is iwlwifi-135-IWL135_UCODE_API_MAX.ucode Change to show the value of the define: iwlwifi-135-6.ucode Signed-off-by:
-
Wey-Yi Guy authored
Adding another SKU for 6005 series devices. Signed-off-by:
-
Joe Perches authored
Convert kzalloc to kcalloc, coalesce multiple lines too. Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Emmanuel Grumbach authored
and do a few clean up fixes on the way Signed-off-by:
-
Emmanuel Grumbach authored
Add documentation to the bus layer API - iwl-bus.h Signed-off-by:
-
