- 22 Mar, 2016 40 commits
-
-
Alexandre Bounine authored
Add RapidIO controller (mport) outbound window configuration operations. This patch is a part of the original patch submitted by Li Yang: https://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/071210.html For some reason the original part was not applied to mainline code tree. The inbound window mapping part has been applied later during tsi721 mport driver submission. Now goes the second part with corresponding HW support. Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Alexandre Bounine authored
- Add spinlock protection into outbound message queuing routine. - Change outbound message interrupt handler to avoid deadlock when calling registered callback routine. - Allow infinite retries for outbound messages to avoid retry threshold error signaling in systems with nodes that have slow message receive queue processing. Signed-off-by:
-
Alexandre Bounine authored
Add new Port Write handler registration interfaces that attach PW handlers to local mport device objects. This is different from old interface that attaches PW callback to individual RapidIO device. The new interfaces are intended for use for common event handling (e.g. hot-plug notifications) while the old interface is available for individual device drivers. This patch is based on patch proposed by Andre van Herk but preserves existing per-device interface and adds lock protection for list handling. Signed-off-by:
-
Alexandre Bounine authored
Make rio_pw_enable() routine available to other RapidIO drivers. Signed-off-by:
-
Alexandre Bounine authored
Make function rio_local_set_device_id() common for all components of RapidIO subsystem. Signed-off-by:
-
Alexandre Bounine authored
Add lock protection around doorbell list handling to prevent list corruption on SMP platforms. Signed-off-by:
-
Alexandre Bounine authored
Add handling of a local mport device removal. RIONET driver registers itself as class interface that supports only removal notification, 'add_device' callback is not provided because RIONET network device can be initialized only after enumeration is completed and the existing method (using remote peer addition) satisfies this condition. Signed-off-by:
-
Alexandre Bounine authored
Add spinlock protection when handling list of connected peers and ability to handle new peer device addition after the RIONET device was open. Before his update RIONET was sending JOIN requests only when it have been opened, peer devices added later have been missing from this process. Signed-off-by:
-
Alexandre Bounine authored
Change mport object initialization/registration sequence to match reworked version of rio_register_mport() in the core code. Signed-off-by:
-
Alexandre Bounine authored
Add hardware-specific device removal support for Tsi721 PCIe-to-RapidIO bridge. To avoid excessive data type conversions, parameters passed to some internal functions have been revised. Dynamic memory allocations of rio_mport and rio_ops have been replaced to reduce references between data structures. Signed-off-by:
-
Alexandre Bounine authored
Add common mport removal support functions into the RapidIO subsystem core. Changes to the existing mport registration process have been made to avoid race conditions with active subsystem interfaces immediately after mport device registration: part of initialization code from rio_register_mport() have been moved into separate function rio_mport_initialize() to allow to perform mport registration as the final step of setup process. Signed-off-by:
-
Alexandre Bounine authored
Make net allocation/release routines available to all components of RapidIO subsystem by moving code from rio-scan enumerator. Make destination ID allocation method private to existing enumerator because other enumeration methods can use their own algorithm. Setup net device object as a parent of all RapidIO devices residing in it and register net as a child of active mport device. Signed-off-by:
-
Alexandre Bounine authored
This patch moves per-net device list handling from rio-scan to common RapidIO core and adds a matching device deletion routine. This makes device object creation/removal available to other implementations of enumeration/discovery process. Signed-off-by:
-
Alexandre Bounine authored
Add shutdown notification handler which terminates active connections with remote RapidIO nodes. This prevents remote nodes from sending packets to the powered off node and eliminates hardware error events on remote nodes. Signed-off-by:
-
Alexandre Bounine authored
Add device driver specific shutdown notification callback. Signed-off-by:
-
Alexandre Bounine authored
Add bus-specific callback to stop RapidIO devices during a system shutdown. Signed-off-by:
-
Alexandre Bounine authored
Add device-specific implementation of query_mport callback function. Signed-off-by:
-
Alexandre Bounine authored
Add mport query operation to report master port RapidIO capabilities and run time configuration to upper level drivers. Signed-off-by:
-
Alexandre Bounine authored
Fix pending DMA request queue handling to avoid broken ordering during concurrent request submissions. Signed-off-by:
-
Alexandre Bounine authored
Add an option to configure mapping of Inbound Window without RIO-to-PCIe address translation. If a local memory buffer is not properly aligned to meet HW requirements for RapidIO address mapping with address translation, caller can request an inbound window with matching RapidIO address assigned to it. This implementation selects RapidIO base address and size for inbound window that are capable to accommodate the local memory buffer. Signed-off-by:
-
Alexandre Bounine authored
Add check for attempts to request mapping of inbound RapidIO address space that overlaps with existing active mapping windows. Tsi721 device does not support overlapped inbound windows and SRIO address decoding behavior is not defined in such cases. This patch is applicable to kernel versions starting from v3.7. Signed-off-by:
-
Alexandre Bounine authored
Remove use of hardcoded setting for Maximum Read Request Size (MRRS) value and use one set by PCIe bus driver. Using hardcoded value can cause PCIe bus errors on platforms that have tsi721 device on PCIe path that allows only smaller read request sizes. This fix is applicable to kernel versions starting from v3.2. Signed-off-by:
-
Aurelien Jacquiot authored
These patches are the result of extensive collaboration within the RapidIO.org Software Task Group between Texas Instruments, Freescale, Prodrive Technologies, Nokia Networks, BAE and IDT. Additional input was received from other members of RapidIO.org. The objective was to create a character mode driver interface which exposes the capabilities of RapidIO devices directly to applications, in a manner that allows the numerous and varied RapidIO implementations to interoperate. The Software Task Group has also developed fabric management, Remote Memory Access, and sockets applications which make use of these interfaces in user space. Intensive testing with these applications prompted the RapidIO subsystem updates provided within this set of patches. This patch (of 29): Replace default Ethernet-specific routine by the custom one to allow setting of larger MTU supported by RapidIO messaging (max RIO packet size is 4096 bytes). Signed-off-by:
Aurelien Jacquiot <a-jacquiot@ti.com> Signed-off-by:
-
Aurelien Jacquiot authored
Fix deadlocking during concurrent receive and transmit operations on SMP platforms caused by the use of incorrect lock: on transmit 'tx_lock' spinlock should be used instead of 'lock' which is used for receive operation. This fix is applicable to kernel versions starting from v2.15. Signed-off-by:
-
Eric Biggers authored
Since commit cdfdef75 ("cpumask: only allocate nr_cpumask_bits."), this comment above cpumask_size() is no longer relevant. Signed-off-by:
Eric Biggers <ebiggers3@gmail.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Jann Horn authored
This commit fixes the following security hole affecting systems where all of the following conditions are fulfilled: - The fs.suid_dumpable sysctl is set to 2. - The kernel.core_pattern sysctl's value starts with "/". (Systems where kernel.core_pattern starts with "|/" are not affected.) - Unprivileged user namespace creation is permitted. (This is true on Linux >=3.8, but some distributions disallow it by default using a distro patch.) Under these conditions, if a program executes under secure exec rules, causing it to run with the SUID_DUMP_ROOT flag, then unshares its user namespace, changes its root directory and crashes, the coredump will be written using fsuid=0 and a path derived from kernel.core_pattern - but this path is interpreted relative to the root directory of the process, allowing the attacker to control where a coredump will be written with root privileges. To fix the security issue, always interpret core_pattern for dumps that are written under SUID_DUMP_ROOT relative to the root directory of init. Signed-off-by:
Jann Horn <jann@thejh.net> Acked-by:
Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Oleg Nesterov authored
This test-case (simplified version of generated by syzkaller) #include <unistd.h> #include <sys/ptrace.h> #include <sys/wait.h> void test(void) { for (;;) { if (fork()) { wait(NULL); continue; } ptrace(PTRACE_SEIZE, getppid(), 0, 0); ptrace(PTRACE_INTERRUPT, getppid(), 0, 0); _exit(0); } } int main(void) { int np; for (np = 0; np < 8; ++np) if (!fork()) test(); while (wait(NULL) > 0) ; return 0; } triggers the 2nd WARN_ON_ONCE(!signr) warning in do_jobctl_trap(). The problem is that __ptrace_unlink() clears task->jobctl under siglock but task->ptrace is cleared without this lock held; this fools the "else" branch which assumes that !PT_SEIZED means PT_PTRACED. Note also that most of other PTRACE_SEIZE checks can race with detach from the exiting tracer too. Say, the callers of ptrace_trap_notify() assume that SEIZED can't go away after it was checked. Signed-off-by:Oleg Nesterov <oleg@redhat.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: syzkaller <syzkaller@googlegroups.com> Signed-off-by:
-
Maciej S. Szmigiero authored
FAT has long supported its own default file name encoding config setting, separate from CONFIG_NLS_DEFAULT. However, if UTF-8 encoded file names are desired FAT character set should not be set to utf8 since this would make file names case sensitive even if case insensitive matching is requested. Instead, "utf8" mount options should be provided to enable UTF-8 file names in FAT file system. Unfortunately, there was no possibility to set the default value of this option so on UTF-8 system "utf8" mount option had to be added manually to most FAT mounts. This patch adds config option to set such default value. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Acked-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by:
-
Andy Lutomirski authored
x86's is_compat_task always checked the current syscall type, not the task type. It has no non-arch users any more, so just remove it to avoid confusion. On x86, nothing should really be checking the task ABI. There are legitimate users for the syscall ABI and for the mm ABI. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Andy Lutomirski authored
uhid changes the format expected in write() depending on bitness. It should check the syscall bitness directly. Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Andy Lutomirski authored
The input compat code should work like all other compat code: for 32-bit syscalls, use the 32-bit ABI and for 64-bit syscalls, use the 64-bit ABI. We have a helper for that (in_compat_syscall()): just use it. Signed-off-by:
-
Andy Lutomirski authored
amdkfd wants to know syscall type, not task type. Check directly. Unfortunately, amdkfd is making nasty assumptions that a process' bitness is a well-defined constant thing. This isn't the case on x86. I don't know how much this matters, but this patch has no effect on generated code on x86, so amdkfd is equally broken with and without this patch. Signed-off-by:
-
Andy Lutomirski authored
This should make no difference on any architecture, as x86's historical is_compat_task behavior really did check whether the calling syscall was a compat syscall. x86's is_compat_task is going away, though. Signed-off-by:
Matt Fleming <matt@codeblueprint.co.uk> Signed-off-by:
-
Andy Lutomirski authored
Firewire was using is_compat_task to check whether it was in a compat ioctl or a non-compat ioctl. Use is_compat_syscall instead so it works properly on all architectures. Signed-off-by:
-
Andy Lutomirski authored
The code wants to prevent compat code from receiving messages. Use in_compat_syscall for this. Signed-off-by:
-
Andy Lutomirski authored
SCTP unfortunately has a different ABI for SCTP_SOCKOPT_CONNECTX3 for 32-bit and 64-bit callers. Use in_compat_syscall to correctly distinguish them on all architectures. Signed-off-by:
-
Andy Lutomirski authored
ext4 treats directory offsets differently for 32-bit and 64-bit callers. Check the caller type using in_compat_syscall, not is_compat_task. This changes behavior on SPARC slightly. Signed-off-by:
-
Andy Lutomirski authored
AFAICT, lustre is trying to determine syscall bitness. Use the new accessor. Signed-off-by:
-
Andy Lutomirski authored
Except on SPARC, this is what the code always did. SPARC compat seccomp was buggy, although the impact of the bug was limited because SPARC 32-bit and 64-bit syscall numbers are the same. Signed-off-by:
-
Andy Lutomirski authored
Users of the 32-bit ptrace() ABI expect the full 32-bit ABI. siginfo translation should check ptrace() ABI, not caller task ABI. This is an ABI change on SPARC. Let's hope that no one relied on the old buggy ABI. Signed-off-by:
-
