- 22 Feb, 2018 4 commits
-
-
Ilan Peer authored
In multi channel scenarios, when disassociating from the AP before a beacon was heard from the AP, it is not guaranteed that the virtual interface is granted air time for the transmission of the deauthentication frame. This in turn can lead to various issues as the AP might never get the deauthentication frame. To mitigate such possible issues, add a HW flag indicating that the driver requires mac80211 to call the mgd_prep_tx() driver callback to make sure that the virtual interface is granted immediate airtime to be able to transmit the frame, in case that no beacon was heard from the AP. Signed-off-by:
Ilan Peer <ilan.peer@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Sara Sharon authored
Extracting the TID from the QOS header is common enough to justify helper. Signed-off-by:
Sara Sharon <sara.sharon@intel.com> Signed-off-by:
-
Johannes Berg authored
Support getting the EOF bit value reported from hardware and writing it out to radiotap. Signed-off-by: -
Denis Kenzior authored
This adds 0x88c7 protocol type to if_ether. Signed-off-by:
Denis Kenzior <denkenz@gmail.com> Signed-off-by:
-
- 19 Feb, 2018 6 commits
-
-
Srinivas Dasari authored
Increase the PMK maximum length to 64 bytes to accommodate the key length used in DPP with the NIST P-521 and Brainpool 512 curves. Signed-off-by:
Srinivas Dasari <dasaris@codeaurora.org> Signed-off-by:
-
Venkateswara Naralasetty authored
This allows users to get ack signal strength of last transmitted frame. Signed-off-by:
Venkateswara Naralasetty <vnaralas@codeaurora.org> Signed-off-by:
-
Venkateswara Naralasetty authored
This patch provides support to get ack signal in probe client response and in station info from user. Signed-off-by:
-
Colin Ian King authored
The pointer hrd is being initialized with a value that is never read and re-assigned a little later, hence the initialization is redundant and can be removed. Cleans up clang warning: net/mac80211/tx.c:1924:24: warning: Value stored to 'hdr' during its initialization is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Srinivas Dasari authored
Unfortunately removal of the ext_feature flag in the last revision of the patch ended up negating the comparison and prevented the command from being processed (either nl80211_external_auth() or rdev_external_auth() returns -EOPNOTSUPP). Fix this by adding back the lost '!'. Fixes: 40cbfa90 ("cfg80211/nl80211: Optional authentication offload to userspace") Signed-off-by:
Jouni Malinen <jouni@codeaurora.org> Signed-off-by:
-
Johannes Berg authored
If we free the message immediately, there's no reason to trim it back to the previous size. Done with spatch: @@ identifier msg, hdr; @@ -if (hdr) - genlmsg_cancel(msg, hdr); ... when != msg; nlmsg_free(msg); @@ identifier msg, hdr; @@ -genlmsg_cancel(msg, hdr); ... when != msg; nlmsg_free(msg); Signed-off-by:
-
- 31 Jan, 2018 9 commits
-
-
tamizhr@codeaurora.org authored
This will add support to send an event to a userspace application whenever station advertise its ht/vht opmode modification through an action frame. Signed-off-by:
Tamizh chelvam <tamizhr@codeaurora.org> Signed-off-by:
-
tamizhr@codeaurora.org authored
ht/vht action frames will be sent to AP from station to notify change of its ht/vht opmode(max bandwidth, smps mode or nss) modified values. Currently these valuse used by driver/firmware for rate control algorithm. This patch introduces NL80211_CMD_STA_OPMODE_CHANGED command to notify those modified/current supported values(max bandwidth, smps mode, max nss) to userspace application. This will be useful for the application like steering, which closely monitoring station's capability changes. Since the application has taken these values during station association. Signed-off-by:
-
Ben Greear authored
Might help one figure out why aqm drivers may fail to transmit frames sometimes. Signed-off-by:
Ben Greear <greearb@candelatech.com> Signed-off-by:
-
Srinivas Dasari authored
This commit allows SAE Authentication for NL80211_CMD_CONNECT interface, provided host driver advertises the support. Host drivers may offload the SAE authentication to user space through NL80211_CMD_EXTERNAL_AUTH interface and thus expect the user space to advertise support to handle offload through NL80211_ATTR_EXTERNAL_AUTH_SUPPORT in NL80211_CMD_CONNECT request. Such drivers should reject the connect request on no offload support from user space. Signed-off-by:
Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by:
Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by:
-
Srinivas Dasari authored
This interface allows the host driver to offload the authentication to user space. This is exclusively defined for host drivers that do not define separate commands for authentication and association, but rely on userspace SME (e.g., in wpa_supplicant for the ~WPA_DRIVER_FLAGS_SME case) for the authentication to happen. This can be used to implement SAE without full implementation in the kernel/firmware while still being able to use NL80211_CMD_CONNECT with driver-based BSS selection. Host driver sends NL80211_CMD_EXTERNAL_AUTH event to start/abort authentication to the port on which connect is triggered and status of authentication is further indicated by user space to host driver through the same command response interface. User space entities advertise this capability through the NL80211_ATTR_EXTERNAL_AUTH_SUPP flag in the NL80211_CMD_CONNECT request. Host drivers shall look at this capability to offload the authentication. Signed-off-by:
-
Sunil Dutt authored
This commit defines new scan flags (LOW_SPAN, LOW_POWER, HIGH_LATENCY) to emphasize the requested scan behavior for the driver. These flags are optional and are mutually exclusive. The implementation of the respective functionality can be driver/hardware specific. These flags can be used to control the compromise between how long a scan takes, how much power it uses, and high accurate/complete the scan is in finding the BSSs. Signed-off-by:
Sunil Dutt <usdutt@qti.qualcomm.com> Signed-off-by:
-
Benjamin Beichler authored
Make the dump operation aware of changes on radio list and corresponding inconsistent dumps. Changed variable name for better understanding. Signed-off-by:
Benjamin Beichler <benjamin.beichler@uni-rostock.de> [compress ternary operator] Signed-off-by:
-
Benjamin Beichler authored
Add a NL_ERR_MSG in case of creating a radio by a netlink message to give clear output to the creating process instead of creating only a debug message in kernel log. The same function is used for the creation while module load, so keep the old message, although it should never be thrown while load, because the module controls all mac addresses. Signed-off-by:
-
Benjamin Beichler authored
If simulation needs predictable permanent mac addresses of hwsim wireless phy, this patch add the ability to create a new radio with a user defined permanent mac address. Allowed mac addresses needs to be locally administrated mac addresses (as also the former fixed 42:* and 02:* were). To do not break the operation with legacy software using hwsim, the new address is set twice. The problem here is, the netlink call backs use wiphy->addresses[1] as identification of a radio and not the proposed permanent address (wiphy->addresses[0]). This design decision is not documented in the kernel repo, therefore this patch simply reproduces this, but with the same address. Signed-off-by:
-
- 30 Jan, 2018 1 commit
-
-
James Hogan authored
ipmr_vif_seq_show() prints the difference between two pointers with the format string %2zd (z for size_t), however the correct format string is %2td instead (t for ptrdiff_t). The same bug in ip6mr_vif_seq_show() was already fixed long ago by commit d430a227 ("bogus format in ip6mr"). Signed-off-by:
James Hogan <jhogan@kernel.org> Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Cc: "David S. Miller" <davem@davemloft.net> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: netdev@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 29 Jan, 2018 20 commits
-
-
Thomas Falcon authored
Wait for a response from the VNIC server before exiting after setting the MAC address. The resolves an issue with bonding a VNIC client in ALB or TLB modes. The bonding driver was changing the MAC address more rapidly than the device could respond, causing the following errors. "bond0: the hw address of slave eth2 is in use by the bond; couldn't find a slave with a free hw address to give it (this should not have happened)" If the function waits until the change is finalized, these errors are avoided. Signed-off-by:
Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by:
-
Junxiao Bi authored
The following soft lockup was caught. This is a deadlock caused by recusive locking. Process kworker/u40:1:28016 was holding spin lock "mbx->queue_lock" in qlcnic_83xx_mailbox_worker(), while a softirq came in and ask the same spin lock in qlcnic_83xx_enqueue_mbx_cmd(). This lock should be hold by disable bh.. [161846.962125] NMI watchdog: BUG: soft lockup - CPU#1 stuck for 22s! [kworker/u40:1:28016] [161846.962367] Modules linked in: tun ocfs2 xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn xenfs xen_privcmd autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc sunrpc 8021q mrp garp bridge stp llc bonding dm_round_robin dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 shpchp lpc_ich mfd_core ioatdma ipmi_devintf ipmi_si ipmi_msghandler sg ext4 jbd2 mbcache2 sr_mod cdrom sd_mod igb i2c_algo_bit i2c_core ahci libahci megaraid_sas ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel qla2xxx scsi_transport_fc qlcnic crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi dm_mirror dm_region_hash dm_log dm_mod [161846.962454] [161846.962460] CPU: 1 PID: 28016 Comm: kworker/u40:1 Not tainted 4.1.12-94.5.9.el6uek.x86_64 #2 [161846.962463] Hardware name: Oracle Corporation SUN SERVER X4-2L /ASSY,MB,X4-2L , BIOS 26050100 09/19/2017 [161846.962489] Workqueue: qlcnic_mailbox qlcnic_83xx_mailbox_worker [qlcnic] [161846.962493] task: ffff8801f2e34600 ti: ffff88004ca5c000 task.ti: ffff88004ca5c000 [161846.962496] RIP: e030:[<ffffffff810013aa>] [<ffffffff810013aa>] xen_hypercall_sched_op+0xa/0x20 [161846.962506] RSP: e02b:ffff880202e43388 EFLAGS: 00000206 [161846.962509] RAX: 0000000000000000 RBX: ffff8801f6996b70 RCX: ffffffff810013aa [161846.962511] RDX: ffff880202e433cc RSI: ffff880202e433b0 RDI: 0000000000000003 [161846.962513] RBP: ffff880202e433d0 R08: 0000000000000000 R09: ffff8801fe893200 [161846.962516] R10: ffff8801fe400538 R11: 0000000000000206 R12: ffff880202e4b000 [161846.962518] R13: 0000000000000050 R14: 0000000000000001 R15: 000000000000020d [161846.962528] FS: 0000000000000000(0000) GS:ffff880202e40000(0000) knlGS:ffff880202e40000 [161846.962531] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [161846.962533] CR2: 0000000002612640 CR3: 00000001bb796000 CR4: 0000000000042660 [161846.962536] Stack: [161846.962538] ffff880202e43608 0000000000000000 ffffffff813f0442 ffff880202e433b0 [161846.962543] 0000000000000000 ffff880202e433cc ffffffff00000001 0000000000000000 [161846.962547] 00000009813f03d6 ffff880202e433e0 ffffffff813f0460 ffff880202e43440 [161846.962552] Call Trace: [161846.962555] <IRQ> [161846.962565] [<ffffffff813f0442>] ? xen_poll_irq_timeout+0x42/0x50 [161846.962570] [<ffffffff813f0460>] xen_poll_irq+0x10/0x20 [161846.962578] [<ffffffff81014222>] xen_lock_spinning+0xe2/0x110 [161846.962583] [<ffffffff81013f01>] __raw_callee_save_xen_lock_spinning+0x11/0x20 [161846.962592] [<ffffffff816e5c57>] ? _raw_spin_lock+0x57/0x80 [161846.962609] [<ffffffffa028acfc>] qlcnic_83xx_enqueue_mbx_cmd+0x7c/0xe0 [qlcnic] [161846.962623] [<ffffffffa028e008>] qlcnic_83xx_issue_cmd+0x58/0x210 [qlcnic] [161846.962636] [<ffffffffa028caf2>] qlcnic_83xx_sre_macaddr_change+0x162/0x1d0 [qlcnic] [161846.962649] [<ffffffffa028cb8b>] qlcnic_83xx_change_l2_filter+0x2b/0x30 [qlcnic] [161846.962657] [<ffffffff8160248b>] ? __skb_flow_dissect+0x18b/0x650 [161846.962670] [<ffffffffa02856e5>] qlcnic_send_filter+0x205/0x250 [qlcnic] [161846.962682] [<ffffffffa0285c77>] qlcnic_xmit_frame+0x547/0x7b0 [qlcnic] [161846.962691] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962696] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962701] [<ffffffff81630112>] sch_direct_xmit+0x112/0x220 [161846.962706] [<ffffffff8160b80f>] __dev_queue_xmit+0x1df/0x5e0 [161846.962710] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962721] [<ffffffffa0575bd5>] bond_dev_queue_xmit+0x35/0x80 [bonding] [161846.962729] [<ffffffffa05769fb>] __bond_start_xmit+0x1cb/0x210 [bonding] [161846.962736] [<ffffffffa0576a71>] bond_start_xmit+0x31/0x60 [bonding] [161846.962740] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962745] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962749] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962754] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962760] [<ffffffffa05cfa72>] vlan_dev_hard_start_xmit+0xb2/0x150 [8021q] [161846.962764] [<ffffffff8160ac22>] xmit_one+0x82/0x1a0 [161846.962769] [<ffffffff8160ad90>] dev_hard_start_xmit+0x50/0xa0 [161846.962773] [<ffffffff8160bb1e>] __dev_queue_xmit+0x4ee/0x5e0 [161846.962777] [<ffffffff8160bc33>] dev_queue_xmit_sk+0x13/0x20 [161846.962789] [<ffffffffa05adf74>] br_dev_queue_push_xmit+0x54/0xa0 [bridge] [161846.962797] [<ffffffffa05ae4ff>] br_forward_finish+0x2f/0x90 [bridge] [161846.962807] [<ffffffff810b0dad>] ? ttwu_do_wakeup+0x1d/0x100 [161846.962811] [<ffffffff815f929b>] ? __alloc_skb+0x8b/0x1f0 [161846.962818] [<ffffffffa05ae04d>] __br_forward+0x8d/0x120 [bridge] [161846.962822] [<ffffffff815f613b>] ? __kmalloc_reserve+0x3b/0xa0 [161846.962829] [<ffffffff810be55e>] ? update_rq_runnable_avg+0xee/0x230 [161846.962836] [<ffffffffa05ae176>] br_forward+0x96/0xb0 [bridge] [161846.962845] [<ffffffffa05af85e>] br_handle_frame_finish+0x1ae/0x420 [bridge] [161846.962853] [<ffffffffa05afc4f>] br_handle_frame+0x17f/0x260 [bridge] [161846.962862] [<ffffffffa05afad0>] ? br_handle_frame_finish+0x420/0x420 [bridge] [161846.962867] [<ffffffff8160d057>] __netif_receive_skb_core+0x1f7/0x870 [161846.962872] [<ffffffff8160d6f2>] __netif_receive_skb+0x22/0x70 [161846.962877] [<ffffffff8160d913>] netif_receive_skb_internal+0x23/0x90 [161846.962884] [<ffffffffa07512ea>] ? xenvif_idx_release+0xea/0x100 [xen_netback] [161846.962889] [<ffffffff816e5a10>] ? _raw_spin_unlock_irqrestore+0x20/0x50 [161846.962893] [<ffffffff8160e624>] netif_receive_skb_sk+0x24/0x90 [161846.962899] [<ffffffffa075269a>] xenvif_tx_submit+0x2ca/0x3f0 [xen_netback] [161846.962906] [<ffffffffa0753f0c>] xenvif_tx_action+0x9c/0xd0 [xen_netback] [161846.962915] [<ffffffffa07567f5>] xenvif_poll+0x35/0x70 [xen_netback] [161846.962920] [<ffffffff8160e01b>] napi_poll+0xcb/0x1e0 [161846.962925] [<ffffffff8160e1c0>] net_rx_action+0x90/0x1c0 [161846.962931] [<ffffffff8108aaba>] __do_softirq+0x10a/0x350 [161846.962938] [<ffffffff8108ae75>] irq_exit+0x125/0x130 [161846.962943] [<ffffffff813f03a9>] xen_evtchn_do_upcall+0x39/0x50 [161846.962950] [<ffffffff816e7ffe>] xen_do_hypervisor_callback+0x1e/0x40 [161846.962952] <EOI> [161846.962959] [<ffffffff816e5c4a>] ? _raw_spin_lock+0x4a/0x80 [161846.962964] [<ffffffff816e5b1e>] ? _raw_spin_lock_irqsave+0x1e/0xa0 [161846.962978] [<ffffffffa028e279>] ? qlcnic_83xx_mailbox_worker+0xb9/0x2a0 [qlcnic] [161846.962991] [<ffffffff810a14e1>] ? process_one_work+0x151/0x4b0 [161846.962995] [<ffffffff8100c3f2>] ? check_events+0x12/0x20 [161846.963001] [<ffffffff810a1960>] ? worker_thread+0x120/0x480 [161846.963005] [<ffffffff816e187b>] ? __schedule+0x30b/0x890 [161846.963010] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963015] [<ffffffff810a1840>] ? process_one_work+0x4b0/0x4b0 [161846.963021] [<ffffffff810a6b3e>] ? kthread+0xce/0xf0 [161846.963025] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963031] [<ffffffff816e6522>] ? ret_from_fork+0x42/0x70 [161846.963035] [<ffffffff810a6a70>] ? kthread_freezable_should_stop+0x70/0x70 [161846.963037] Code: cc 51 41 53 b8 1c 00 00 00 0f 05 41 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc 51 41 53 b8 1d 00 00 00 0f 05 <41> 5b 59 c3 cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Signed-off-by:
-
Li RongQing authored
socket can be disconnected and gets transformed back to a listening socket, if sk_frag.page is not released, which will be cloned into a new socket by sk_clone_lock, but the reference count of this page is increased, lead to a use after free or double free issue Signed-off-by:
Li RongQing <lirongqing@baidu.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Tonghao Zhang authored
When using ioctl to get address of interface, we can't get it anymore. For example, the command is show as below. # ifconfig eth0 In the patch ("03aef17b"), the devinet_ioctl does not return a suitable value, even though we can find it in the kernel. Then fix it now. Fixes: 03aef17b ("devinet_ioctl(): take copyin/copyout to caller") Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:Tonghao Zhang <xiangxia.m.yue@gmail.com> Acked-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Eric Dumazet authored
syzbot reported a lockdep splat in gen_new_estimator() / est_fetch_counters() when attempting to lock est->stats_lock. Since est_fetch_counters() is called from BH context from timer interrupt, we need to block BH as well when calling it from process context. Most qdiscs use per cpu counters and are immune to the problem, but net/sched/act_api.c and net/netfilter/xt_RATEEST.c are using a spinlock to protect their data. They both call gen_new_estimator() while object is created and not yet alive, so this bug could not trigger a deadlock, only a lockdep splat. Fixes: 1c0d32fd ("net_sched: gen_estimator: complete rewrite of rate estimators") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Harini Katakam authored
Handle HRESP error by doing a SW reset of RX and TX and re-initializing the descriptors, RX and TX queue pointers. Signed-off-by:
Harini Katakam <harinik@xilinx.com> Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
-
Gal Pressman authored
On TTC table creation, the indirection TIRs should be used instead of the inner indirection TIRs. Fixes: 1ae1df3a ("net/mlx5e: Refactor RSS related objects and code") Signed-off-by:
Gal Pressman <galp@mellanox.com> Reviewed-by:
Shalom Lagziel <shaloml@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Eric Dumazet authored
Heiner reported a lockdep splat [1] This is caused by attempting GFP_KERNEL allocation while RCU lock is held and BH blocked. We believe that addrconf_verify_rtnl() could run for a long period, so instead of using GFP_ATOMIC here as Ido suggested, we should break the critical section and restart it after the allocation. [1] [86220.125562] ============================= [86220.125586] WARNING: suspicious RCU usage [86220.125612] 4.15.0-rc7-next-20180110+ #7 Not tainted [86220.125641] ----------------------------- [86220.125666] kernel/sched/core.c:6026 Illegal context switch in RCU-bh read-side critical section! [86220.125711] other info that might help us debug this: [86220.125755] rcu_scheduler_active = 2, debug_locks = 1 [86220.125792] 4 locks held by kworker/0:2/1003: [86220.125817] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.125895] #1: ((addr_chk_work).work){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.125959] #2: (rtnl_mutex){+.+.}, at: [<00000000b06d9510>] rtnl_lock+0x12/0x20 [86220.126017] #3: (rcu_read_lock_bh){....}, at: [<00000000aef52299>] addrconf_verify_rtnl+0x1e/0x510 [ipv6] [86220.126111] stack backtrace: [86220.126142] CPU: 0 PID: 1003 Comm: kworker/0:2 Not tainted 4.15.0-rc7-next-20180110+ #7 [86220.126185] Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015 [86220.126250] Workqueue: ipv6_addrconf addrconf_verify_work [ipv6] [86220.126288] Call Trace: [86220.126312] dump_stack+0x70/0x9e [86220.126337] lockdep_rcu_suspicious+0xce/0xf0 [86220.126365] ___might_sleep+0x1d3/0x240 [86220.126390] __might_sleep+0x45/0x80 [86220.126416] kmem_cache_alloc_trace+0x53/0x250 [86220.126458] ? ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.126498] ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.126538] ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.126580] ? ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.126623] addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.126664] ? addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.126708] addrconf_verify_work+0xe/0x20 [ipv6] [86220.126738] process_one_work+0x258/0x680 [86220.126765] worker_thread+0x35/0x3f0 [86220.126790] kthread+0x124/0x140 [86220.126813] ? process_one_work+0x680/0x680 [86220.126839] ? kthread_create_worker_on_cpu+0x40/0x40 [86220.126869] ? umh_complete+0x40/0x40 [86220.126893] ? call_usermodehelper_exec_async+0x12a/0x160 [86220.126926] ret_from_fork+0x4b/0x60 [86220.126999] BUG: sleeping function called from invalid context at mm/slab.h:420 [86220.127041] in_atomic(): 1, irqs_disabled(): 0, pid: 1003, name: kworker/0:2 [86220.127082] 4 locks held by kworker/0:2/1003: [86220.127107] #0: ((wq_completion)"%s"("ipv6_addrconf")){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.127179] #1: ((addr_chk_work).work){+.+.}, at: [<00000000da8e9b73>] process_one_work+0x1de/0x680 [86220.127242] #2: (rtnl_mutex){+.+.}, at: [<00000000b06d9510>] rtnl_lock+0x12/0x20 [86220.127300] #3: (rcu_read_lock_bh){....}, at: [<00000000aef52299>] addrconf_verify_rtnl+0x1e/0x510 [ipv6] [86220.127414] CPU: 0 PID: 1003 Comm: kworker/0:2 Not tainted 4.15.0-rc7-next-20180110+ #7 [86220.127463] Hardware name: ZOTAC ZBOX-CI321NANO/ZBOX-CI321NANO, BIOS B246P105 06/01/2015 [86220.127528] Workqueue: ipv6_addrconf addrconf_verify_work [ipv6] [86220.127568] Call Trace: [86220.127591] dump_stack+0x70/0x9e [86220.127616] ___might_sleep+0x14d/0x240 [86220.127644] __might_sleep+0x45/0x80 [86220.127672] kmem_cache_alloc_trace+0x53/0x250 [86220.127717] ? ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.127762] ipv6_add_addr+0xfe/0x6e0 [ipv6] [86220.127807] ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.127854] ? ipv6_create_tempaddr+0x24d/0x430 [ipv6] [86220.127903] addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.127950] ? addrconf_verify_rtnl+0x339/0x510 [ipv6] [86220.127998] addrconf_verify_work+0xe/0x20 [ipv6] [86220.128032] process_one_work+0x258/0x680 [86220.128063] worker_thread+0x35/0x3f0 [86220.128091] kthread+0x124/0x140 [86220.128117] ? process_one_work+0x680/0x680 [86220.128146] ? kthread_create_worker_on_cpu+0x40/0x40 [86220.128180] ? umh_complete+0x40/0x40 [86220.128207] ? call_usermodehelper_exec_async+0x12a/0x160 [86220.128243] ret_from_fork+0x4b/0x60 Fixes: f3d9832e ("ipv6: addrconf: cleanup locking in ipv6_add_addr") Signed-off-by:Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Wei Wang authored
In current route cache aging logic, if a route has both RTF_EXPIRE and RTF_GATEWAY set, the route will only be removed if the neighbor cache has no NTF_ROUTER flag. Otherwise, even if the route has expired, it won't get deleted. Fix this logic to always check if the route has expired first and then do the gateway neighbor cache check if previous check decide to not remove the exception entry. Fixes: 1859bac0 ("ipv6: remove from fib tree aged out RTF_CACHE dst") Signed-off-by:
Wei Wang <weiwan@google.com> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Alexander Duyck authored
When compared to ixgbe and other previous Intel drivers the i40e and i40evf drivers actually reserve 2 additional descriptors in maybe_stop_tx for cache line alignment. We need to update DESC_NEEDED to reflect this as otherwise we are more likely to return TX_BUSY which will cause issues with things like xmit_more. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Andy Gospodarek authored
Make sure to cancel any pending work that might update driver coalesce settings when taking down an interface. Fixes: 6a8788f2 ("bnxt_en: add support for software dynamic interrupt moderation") Signed-off-by:
Andy Gospodarek <gospo@broadcom.com> Cc: Michael Chan <michael.chan@broadcom.com> Acked-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
David Ahern authored
Unsolicited IPv6 neighbor advertisements should be sent after DAD completes. Update ndisc_send_unsol_na to skip tentative, non-optimistic addresses and have those sent by addrconf_dad_completed after DAD. Fixes: 4a6e3c5d ("net: ipv6: send unsolicited NA on admin up") Reported-by:
Vivek Venkatraman <vivek@cumulusnetworks.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Andy Spencer authored
When the frame check sequence (FCS) is split across the last two frames of a fragmented packet, part of the FCS gets counted twice, once when subtracting the FCS, and again when subtracting the previously received data. For example, if 1602 bytes are received, and the first fragment contains the first 1600 bytes (including the first two bytes of the FCS), and the second fragment contains the last two bytes of the FCS: 'skb->len == 1600' from the first fragment size = lstatus & BD_LENGTH_MASK; # 1602 size -= ETH_FCS_LEN; # 1598 size -= skb->len; # -2 Since the size is unsigned, it wraps around and causes a BUG later in the packet handling, as shown below: kernel BUG at ./include/linux/skbuff.h:2068! Oops: Exception in kernel mode, sig: 5 [#1] ... NIP [c021ec60] skb_pull+0x24/0x44 LR [c01e2fbc] gfar_clean_rx_ring+0x498/0x690 Call Trace: [df7edeb0] [c01e2c1c] gfar_clean_rx_ring+0xf8/0x690 (unreliable) [df7edf20] [c01e33a8] gfar_poll_rx_sq+0x3c/0x9c [df7edf40] [c023352c] net_rx_action+0x21c/0x274 [df7edf90] [c0329000] __do_softirq+0xd8/0x240 [df7edff0] [c000c108] call_do_irq+0x24/0x3c [c0597e90] [c00041dc] do_IRQ+0x64/0xc4 [c0597eb0] [c000d920] ret_from_except+0x0/0x18 --- interrupt: 501 at arch_cpu_idle+0x24/0x5c Change the size to a signed integer and then trim off any part of the FCS that was received prior to the last fragment. Fixes: 6c389fc9 ("gianfar: fix size of scatter-gathered frames") Signed-off-by:
Andy Spencer <aspencer@spacex.com> Signed-off-by:
-
David S. Miller authored
Cong Wang says: ==================== net_sched: reflect tx_queue_len change for pfifo_fast This pathcset restores the pfifo_fast qdisc behavior of dropping packets based on latest dev->tx_queue_len. Patch 1 introduces a helper, patch 2 introduces a new Qdisc ops which is called when we modify tx_queue_len, patch 3 implements this ops for pfifo_fast. Please see each patch for details. --- v3: use skb_array_resize_multiple() v2: handle error case for ->change_tx_queue_len() ==================== Signed-off-by: -
Cong Wang authored
pfifo_fast used to drop based on qdisc_dev(qdisc)->tx_queue_len, so we have to resize skb array when we change tx_queue_len. Other qdiscs which read tx_queue_len are fine because they all save it to sch->limit or somewhere else in qdisc during init. They don't have to implement this, it is nicer if they do so that users don't have to re-configure qdisc after changing tx_queue_len. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Cong Wang authored
Introduce a new qdisc ops ->change_tx_queue_len() so that each qdisc could decide how to implement this if it wants. Previously we simply read dev->tx_queue_len, after pfifo_fast switches to skb array, we need this API to resize the skb array when we change dev->tx_queue_len. To avoid handling race conditions with TX BH, we need to deactivate all TX queues before change the value and bring them back after we are done, this also makes implementation easier. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Cong Wang authored
This patch promotes the local change_tx_queue_len() to a core helper function, dev_change_tx_queue_len(), so that rtnetlink and net-sysfs could share the code. This also prepares for the following patch. Note, the -EFAULT in the original code doesn't make sense, we should propagate the errno from notifiers. Cc: John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Jason Wang authored
We don't stop device before reset owner, this means we could try to serve any virtqueue kick before reset dev->worker. This will result a warn since the work was pending at llist during owner resetting. Fix this by stopping device during owner reset. Reported-by: syzbot+eb17c6162478cc50632c@syzkaller.appspotmail.com Fixes: 3a4d5c94 ("vhost_net: a kernel-level virtio server") Signed-off-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
David S. Miller authored
Nicolas Dichtel says: ==================== net: Ease to follow an interface that moves to another netns The goal of this series is to ease the user to follow an interface that moves to another netns. After this series, with a patched iproute2: $ ip netns bar foo $ ip monitor link & $ ip link set dummy0 netns foo Deleted 5: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default link/ether 6e:a7:82:35:96:46 brd ff:ff:ff:ff:ff:ff new-nsid 0 new-ifindex 6 => new nsid: 0, new ifindex: 6 (was 5 in the previous netns) $ ip link set eth1 netns bar Deleted 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default link/ether 52:54:01:12:34:57 brd ff:ff:ff:ff:ff:ff new-nsid 1 new-ifindex 3 => new nsid: 1, new ifindex: 3 (same ifindex) $ ip netns bar (id: 1) foo (id: 0) ==================== Signed-off-by: -
Nicolas Dichtel authored
The goal is to let the user follow an interface that moves to another netns. CC: Jiri Benc <jbenc@redhat.com> CC: Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
