Merge tag 'uniphier-dt-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier into next/dt

UniPhier ARM SoC DT updates for v4.19

- Add missing #cooling-cells properties

* tag 'uniphier-dt-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-uniphier:
  ARM: dts: uniphier: Add missing cooling device properties for CPUs
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.19/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Few more beaglebone variants for v4.19 merge window

This adds dts files for two new beaglebone variants for
Octavo Systems OSD3358-SM-RED and Sancloud am335x-sancloud-bbe.

* tag 'omap-for-v4.19/dt-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x: add am335x-sancloud-bbe board support
  dt-bindings: Add vendor prefix for Sancloud
  ARM: dts: Add DT support for Octavo Systems OSD3358-SM-RED based on TI AM335x
Signed-off-by: Olof Johansson <olof@lixom.net>

The cooling device properties, like "#cooling-cells" and
"dynamic-power-coefficient", should either be present for all the CPUs
of a cluster or none. If these are present only for a subset of CPUs of
a cluster then things will start falling apart as soon as the CPUs are
brought online in a different order. For example, this will happen
because the operating system looks for such properties in the CPU node
it is trying to bring up, so that it can register a cooling device.

Add such missing properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

The "Beaglebone Enhanced" by Sancloud is based on the Beaglebone Black,
but with the following differences:

 * Gigabit capable PHY
 * Extra USB hub, optional i2c control
 * lps3331ap barometer connected over i2c
 * MPU6050 6 axis MEMS accelerometer/gyro connected over i2c
 * 1GiB DDR3 RAM
 * RTL8723 Wifi/Bluetooth connected over USB

Tested on a revision G board.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Add vendor prefix for Sancloud Ltd.
Signed-off-by: Koen Kooi <koen@dominion.thruhere.net>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

OSD3358-SM-RED is a dev board for OSD335x System-in-Package(SiP) devices from
Octavo Systems.

This board family can be indentified by the A335BNLTOS00 in the at24 eeprom:
A2: [aa 55 33 ee 41 33 33 35  42 4e 4c 54 4f 53 30 30 |.U3.A335BNLTOS00|]

https://octavosystems.com/octavo_products/osd3358-sm-red/Signed-off-by: Neeraj Dantu <neeraj.dantu@octavosystems.com>
CC: Tony Lindgren <tony@atomide.com>
CC: Robert Nelson <robertcnelson@gmail.com>
CC: Jason Kridner <jkridner@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'gemini-dts-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt

Gemini DTS updates for v4.19:
- Add Vitesse switch chips
- Add a new DT for a reference design

* tag 'gemini-dts-v4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: Add devicetree for Storlink/Storm SL93512R
  ARM: dts: Add Vitesse G5e switch to the Gemini SQ201
  ARM: dts: Add WAN ethernet port to the SQ201
Signed-off-by: Olof Johansson <olof@lixom.net>

The Storlink Gemini324 EV-Board also known as Storm
Semiconductor SL93512R_BRD is ground zero for the Gemini
devices. We add a device tree so we can support it, it
turns out to be pretty trivial.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This adds the Vitesse G5e ethernet switch to the Square
One Itian SQ201 router device tree.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This sets up the ethernet interface and PHY for the
WAN ethernet port which uses a Marvell PHY.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'v4.18-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Fix for a new warning from dtc in graph node unit addresses.

* tag 'v4.18-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: fix graph node unit address error from dtc
Signed-off-by: Olof Johansson <olof@lixom.net>

After the work done by Thomas Petazzoni, the NAND chip timings
can be read out from the chip instead of open coded in the
device tree, so let's just remove the timing information.

Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'stm32-dt-for-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt

STM32 DT updates for v4.19, round 1

Highlights:
----------

-MCU platforms update:
 -Update RTC syscfg bindings on stm32f746 and stm32f429
 -Update IWDG node with LSI clock name on stm32f429

-MPU STM32MP157 platform update:
 -Add HASH support
 -Add m_can support and enable it on EV1 board
 -Add RTC suppoort and enable it on ED1 board
 -Add USB OTG HS support and enable it on EV1 board
 -Enable USB Host EHCI on EV1 board
 -Add DFSDM support
 -Add SPI support
 -Add ETH support and enable it on EV1 board
 -Add IWDG support and enable it on ED1 board
 -Fix useless GPIO aliases and reorder nodes

* tag 'stm32-dt-for-v4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (22 commits)
  ARM: dts: stm32: update iwdg with lsi clock name for stm32f429
  ARM: dts: stm32: add iwdg2 support for stm32mp157c-ed1
  ARM: dts: stm32: add iwdg2 support for stm32mp157c
  ARM: dts: stm32: Reorder nodes in stm32mp157c-ed1
  ARM: dts: stm32: remove gpio aliases for stm32mp157c
  ARM: dts: stm32: add support of ethernet on stm32mp157c-ev1
  ARM: dts: stm32: Add ethernet dwmac on stm32mp1
  ARM: dts: stm32: Add syscfg on stm32mp1
  ARM: dts: stm32: add SPI1 support on stm32mp157c-ev1
  ARM: dts: stm32: add SPI support on stm32mp157c
  ARM: dts: stm32: Add DFSDM support to stm32mp157c
  ARM: dts: stm32: Add ADC support to stm32mp157c
  ARM: dts: stm32: enable USB OTG HS on stm32mp157c-ev1
  ARM: dts: stm32: add USB OTG HS support for stm32mp157c SoC
  ARM: dts: stm32: enable USB Host (USBH) EHCI controller on stm32mp157c-ev1
  ARM: dts: stm32: enable RTC on stm32mp157c-ed1
  ARM: dts: stm32: add RTC support to stm32mp157c
  ARM: dts: stm32: m_can activation on stm32mp157c-ev1
  ARM: dts: stm32: m_can support to stm32mp157c
  ARM: dts: stm32: Add HASH support on stm32mp157c
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt64 for 4.19 (part 1)

Armada 3700
 - Add default memory reservation for ATF
 - Add a node for AVS support
Fix eth3 connector name on the Macchiatobin

* tag 'mvebu-dt64-4.19-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: armada-37xx: reserve memory for ATF
  arm64: dts: marvell: armada-37xx: add the node allowing AVS support
  arm64: dts: marvell: mcbin: fix eth3 connector name
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt for 4.19 (part 1)

 - Add a new Armada 388 based board: helios4
 - Enable SPI flash by default on SolidRun Armada 38x Microsom

* tag 'mvebu-dt-4.19-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada388-clearfog: drop future changes disclaimer
  ARM: dts: armada388-clearfog: enable spi flash
  ARM: dts: armada388-helios4
Signed-off-by: Olof Johansson <olof@lixom.net>

This device-tree pxa update brings :
 - pxa3xx fixes and updates

* tag 'pxa-dt-4.19' of https://github.com/rjarzmik/linux:
  arm: dts: pxa3xx: Add ssp ports to pxa3xx device tree
  arm: dts: pxa3xx: provide correct clk-names property for nand controller node
  ARM: dts: pxa: add label to lcd controller node
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt64-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DTS ARM64 changes for v4.19

Cleanup from old properties and code-style warnings.

* tag 'samsung-dt64-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  arm64: dts: exynos: Remove leading 0x from unit addresses in Exynos5433
  arm64: dts: exynos: Remove no longer needed samsung thermal properties
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-dt-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt

Samsung DTS ARM changes for v4.19

1. Add two new S5Pv210 boards: Samsung Galaxy S and Samsung Galaxy S 4G
   mobile phones.  Both are from family codenamed Aries.  The Samsung
   Galaxy S was released on the market in 2010 with Android operating
   system.  At that time, it was the Samsung's flagship model.
   This brings support for storage (SD card and internal memory), PMIC,
   RTC, fuel-gauge, keys, USB (in peripherial mode) and WiFi.

2. Add missing secondary CPU properties.
3. Cleanup from old files and properties.

* tag 'samsung-dt-4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  dt-bindings: samsung: Document bindings for SGH-T959P board
  dt-bindings: samsung: Document bindings for Samsung aries boards
  ARM: dts: s5pv210: Add initial DTS for SGH-T959P phone
  ARM: dts: s5pv210: Add initial DTS for Samsung Galaxy S phone
  ARM: dts: s5pv210: Add initial DTS for Samsung Aries based phones
  ARM: dts: s5pv210: Add missing interrupt-controller property to gph2
  ARM: dts: exynos: remove no longer needed samsung thermal properties
  dt-bindings: arm: Remove obsolete insignal-boards.txt
  ARM: dts: exynos: Add missing CPU clocks to secondary CPUs on Exynos542x
  arm: dts: exynos: Add missing cooling device properties for CPUs
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

arm64: tegra: Device tree changes for v4.19-rc1

These changes enable the GPIO controllers on Tegra194 SoCs, which in
turn allows the SD card detection and ethernet controllers to be enabled
as well. The Tegra194 device tree is also extended with the list of CPUs
and a PSCI node to inform the kernel about the presence of PSCI capable
firmware.

* tag 'tegra-for-4.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Add CPU nodes to Tegra194 device tree
  arm64: tegra: Add ethernet controller on Tegra194
  arm64: tegra: Enable card detect for SD card on P2888
  arm64: tegra: Add GPIO controller on Tegra194
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.19-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

ARM: tegra: Device tree changes for v4.19-rc1

This set of changes adds support for the memory client resets on Tegra20
and Tegra30, fixes a couple of issues on Cardhu and Tegra30 Apalis as
well as adds a unit-address to the memory node to avoid warnings from
DTC. To round things of, the NAND flash controller is enabled on the
Tegra20 Colibri.

* tag 'tegra-for-4.19-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  ARM: dts: tegra: enable NAND flash on Colibri T20
  ARM: dts: tegra: add Tegra20 NAND flash controller node
  ARM: tegra: Work safely with 256 MB Colibri-T20 modules
  ARM: tegra: Fix unit_address_vs_reg and avoid_unnecessary_addr_size DTC warnings
  ARM: tegra: Fix unit_address_vs_reg DTC warnings for /memory
  ARM: tegra: Remove usage of deprecated skeleton.dtsi
  ARM: tegra: Fix can2 on Tegra30 Apalis
  ARM: tegra: Fix Tegra30 Cardhu PCA954x reset
  ARM: dts: tegra30: Add Memory Client reset to VDE
  ARM: dts: tegra20: Add Memory Client reset to VDE
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-4.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

dt-bindings: tegra: Changes for v4.19-rc1

This contains a single update that adds the Carmel CPU found in Tegra194
SoCs to the arm/cpus.txt device tree bindings.

* tag 'tegra-for-4.19-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  dt-bindings: arm: Add compatible string for NVIDIA Carmel
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.19/dt-mcan-v2-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

dts changes for mcan for omaps for v4.19 merge window

These changes configure the mcan clock, interconnect target
module and mcan device. These changes depend on the ti-sysc
related driver changes and are based on those.

Notably this is the first new driver that probes with ti-sysc
driver with no legacy hwmod platform data for the interconnect
target module.

* tag 'omap-for-v4.19/dt-mcan-v2-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra76x: Add MCAN node
  ARM: dts: Add generic interconnect target module node for MCAN
  ARM: dts: dra762: Add MCAN clock support
  bus: ti-sysc: Add support for software reset
  bus: ti-sysc: Add support for using ti-sysc for MCAN on dra76x
  clk: ti: dra7: Add clkctrl clock data for the mcan clocks
  bus: ti-sysc: Use 2-factor allocator arguments
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'omap-for-v4.19/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

dts changes for omaps for v4.19 merge window

Mostly updates to configure and improve the devices
found on various SoCs and boards:

- several patches to update support for am3517-evm
  to replace bogus fixed regulators with proper
  regulators and configure various devices such
  as wlan, bluetooth and usb1

- add missing cooling devices for omap5 and dra7

- configure dual role for usb ports for am57xx
  and dra7

- PM updates for omap4 devices to allow retention
  idle for minimal configurations

- am335x-sl50 updates for various devices

- update d-can alias names to not use undescore

- configure pandaboard gpio button

- a non-urgent change to fix dcan node address that
  i forgot to send a pull request for earlier

* tag 'omap-for-v4.19/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits)
  ARM: dts: pandaboard: add gpio user button
  ARM: dts: am3517-evm: Add 'vdd_io_reg' regulator references
  ARM: dts: am3517-evm: Enable USB1 Host
  ARM: dts: am33xx: Fix syntax of alias names
  ARM: dts: am3517-som:  Add builtin Bluetooth
  ARM: dts: am3517-som: Add WL127x Wifi
  ARM: dts: am335x-sl50: enable tsadc on SL50 board
  ARM: dts: am335x-sl50: fix label names for all LEDs
  ARM: dts: am335x-sl50: use audio-graph-card for sound
  ARM: dts: am335x-sl50: add support for DS1339 Real Time Clock
  ARM: dts: am335x-sl50: set dr_mode to otg
  ARM: dts: am335x-sl50: add a node for the LCD controller
  ARM: dts: am335x-sl50: use phy-phandle declarations
  ARM: dts: am335x-sl50: update backlight nodes
  ARM: dts: omap4-droid4: Use software debounce for gpio-keys
  ARM: dts: Configure duovero for to allow core retention during idle
  ARM: dts: Improve omap l4per idling with wlcore edge sensitive interrupt
  ARM: dts: dra76-evm: Add VBUS GPIO to USB1/USB2 extcon
  ARM: dts: dra71-evm: Add VBUS GPIO to USB1/USB2 extcon
  ARM: dts: dra7-evm: Add extcon to USB2 port
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-for-v4.19/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/dt

DaVinci Device-Tree updates for v4.19
-------------------------------------

* DA850 now uses clocks from device-tree
* DA850 EVM gains LCD (with backlight) and SATA support
* Lego Mindstorms gains bluetooth support
* DSP reset control support on DA850

* tag 'davinci-for-v4.19/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: dts: da850: Add power-domains to CPPI 4.1 node
  ARM: davinci: dts: add a reset control to the dsp node
  ARM: davinci: dts: make psc0 a reset provider
  ARM: dts: da850-lego-ev3: Add Bluetooth nodes
  ARM: dts: da850: Add power-domains to PWM nodes
  ARM: dts: da850: Add clocks
  dt-bindings: timer: new bindings for TI DaVinci timer
  ARM: dts: da850-evm: Enable LCD and backlight
  ARM: dts: da850-evm: Enable SATA port
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM64-based SoCs Device Tree changes
for 4.19, please pull the following:

- Scott does a bunch of updates to the Stingray DTS and DTS include
  files to better support the addition of new boards. Scott also adds
  the Stingray OTP Device Tree node

- Pramod updates the Stingray clocks such that they match the latest
  revision of the ASIC and datasheets

- Ray sets the Stingray initial watchdog timeout to 60 seconds to give
  sufficient time for the kernel to boot and then adds PAXC (internal
  PCIe) support to the Stingray base DTS files

- Vladimir adds support for the Stingray smart NIC PS225 boards variants

* tag 'arm-soc/for-4.19/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: stingray: add bcm958802a802x dts
  arm64: dts: stingray: add PAXC support
  arm64: dts: set initial SR watchdog timeout to 60 seconds
  arm64: dts: Update Stingray clock DT nodes
  arm64: dts: stingray: Add OTP device node
  arm64: dts: stingray: move common board components to stingray-board-base
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 4.19, please pull the following:

- Clement adds ethernet aliases to the Cygnus DTS include file such that
  a DT aware bootloader such as u-boot can properly insert MAC addresses

- Mohamed adds a Device Tree node for the HWRNG found on Cygnus SoCs

- Vivek migrates all the BCM5301x (Northstar) Device Tree sources to use
  the proper USB 3.0 PHY representation using its parent MDIO bus.
  Vivek also completes the Linksys EA9500 Device Tree by adding support
  for LEDs, internal and external switches.

- Rafal adds the ARM architected timer to the BCM53573 Device Tree
  include file.

- Eric adds the Performance Monitoring Unit to the BCM2837 DTS include
  file since it was absent before

- Boris adds the BCM283x transposer block to the Device Tree

- Stefan adds the Raspberry Pi Compute Module (CM1) Device Tree include
  and sources.

* tag 'arm-soc/for-4.19/devicetree' of https://github.com/Broadcom/stblinux:
  ARM: dts: BCM5301X: Add support for Linksys EA9500
  ARM: dts: BCM53573: Add architected timer
  ARM: dts: BCM5301X: Make USB 3.0 PHY use MDIO PHY driver
  ARM: dts: cygnus: enable iproc-hwrng
  ARM: dts: cygnus: add ethernet0 alias
  ARM: dts: bcm283x: Add Transposer block
  ARM: dts: bcm283x: Add the PMU to the devicetree.
  ARM: dts: add Raspberry Pi Compute Module and IO board
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v4.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

SPDX conversion for existing devicetree files. New board is Gru-Bob
the Chromebook Flip C101PA which also got some stuff moved around
to make room for Scarlet once its display pipeline makes some more
advances.
Also included are some general sound improvements for rk3399
including enabling hdmi-sound on the sapphire board and some
misc fixes like missing cooling device properties and wrong
clock-names for the uart1 on rk3328.

* tag 'v4.19-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  arm64: dts: rockchip: corrected uart1 clock-names for rk3328
  arm64: dts: rockchip: add Google Bob
  arm64: dts: rockchip: move core edp from rk3399-kevin to shared chromebook
  arm64: dts: rockchip: move Chromebook-specific Gru-parts to a separate file
  arm64: dts: rockchip: add phandles to some nodes on rk3399-gru
  arm64: dts: rockchip: add some common pin-settings to rk3399
  arm64: dts: rockchip: generalize rk3399 #sound-dai-cells
  arm64: dts: rockchip: Add missing cooling device properties for CPUs
  arm64: dts: rockchip: enable hdmi sound on rk3399-sapphire
  arm64: dts: rockchip: connect hdmi sound in rk3399
  arm64: dts: rockchip: use SPDX-License-Identifier
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'v4.19-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

SPDX conversion for existing Rockchip devicetree files as well
as conversion of rk3288 to OPPv2 to facilitate the addition of
missing cpu-cooling-device properties.

* tag 'v4.19-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
  ARM: dts: rockchip: Add missing cooling device properties for CPUs on rk3288
  ARM: dts: rockchip: convert rk3288 to operating-points-v2
  ARM: dts: rockchip: Add missing cooling device properties for CPUs on rk322x
  ARM: dts: rockchip: use SPDX-License-Identifier
Signed-off-by: Olof Johansson <olof@lixom.net>

Add bcm958802a802x dts to be used on all Stingray smart NIC PS225 board
variants
Signed-off-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Signed-off-by: Pramod Kumar <pramod.kumar@broadcom.com>
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Add PAXC support to Broadcom Stingray SoC
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Peter Spreadborough <peter.spreadborough@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

This patch updates iwdg watchdog to use lsi clock name.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch activates independent watchdog support for
stm32mp157c board.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds independent watchdog support for stm32mp157c.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Nodes should be ordered in alphabetic order.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

GPIO aliases are not used by stm32 pinctrl driver.
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

MAC is connected to a PHY in RGMII mode.
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Add Ethernet support (Synopsys MAC IP 4.20a) on stm32mp1 SOC.
Enable feature supported by the stmmac driver, such as TSO.
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

System configuration controller is mainly used to manage
the compensation cell and other IOs and system related
settings.
Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds SPI1 support on stm32mp157c-ev1 board.
SPI1 is available on GPIO expansion connector but kept disabled
so these pins can be used as GPIOs by default.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

This patch adds all SPI instances on stm32mp157c.
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>