- 11 Feb, 2013 21 commits
-
-
Stephen Hemminger authored
Fixes sparse complaints about dropping __user in casts. warning: cast removes address space of expression Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
And remove no longer used br->flags. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
Cc: Erik Hugne <erik.hugne@ericsson.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
v2: a) moved before multicast source address check b) changed comment to netdev style Cc: Erik Hugne <erik.hugne@ericsson.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
Reported-by: Erik Hugne <erik.hugne@ericsson.com> Cc: Erik Hugne <erik.hugne@ericsson.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
o Do not read mailbox registers on timeout o Add a helper function to handle mailbox response Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
o Handle async events during diagnostic loopback test o Clear loopback mode on failure to receive async events Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Cleanly separate 83xx diagnostic IRQ test from 82xx Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Cleanly separate 83xx diagnostic loopback test routines from 82xx Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Create a helper routine to handle async events, as it is being called from multiple places Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jitendra Kalsaria authored
Driver needs to stop participating in firmware based Inter Driver Communication (IDC) while unloading driver Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Himanshu Madhani authored
Register for firmware based Inter Driver Communication (IDC) using initialize NIC as the first mailbox command Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
To allow both of protocol-specific data and device-specific data attached with neighbour entry, and to eliminate size calculation cost when allocating entry, sizeof protocol-speicic data must be multiple of NEIGH_PRIV_ALIGN. On 64bit archs, sizeof(struct dn_neigh) is multiple of NEIGH_PRIV_ALIGN, but on 32bit archs, it was not. Introduce NEIGH_ENTRY_SPACE() macro to ensure that protocol-specific entry-size meets our requirement. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
YOSHIFUJI Hideaki / 吉藤英明 authored
RFC4291 (IPv6 addressing architecture) says that interface-Local scope spans only a single interface on a node. We should not join L2 device multicast list for addresses in interface-local (or smaller) scope. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
commit d0e2c55e (veth: avoid a NULL deref in veth_stats_one) added another NULL deref in veth_dellink(). # ip link add name veth1 type veth peer name veth0 # rmmod veth We crash because veth_dellink() is called twice, so we must take care of NULL peer. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
David Ward says: ==================== The Linux kernel currently implements the GARP VLAN Registration Protocol (GVRP) from IEEE 802.1Q-1998 (applicant-only participant). When the GVRP flag is set for a VLAN interface on a Linux host, the host advertises its membership in the VLAN to the attached bridge/ switch, so that it is not necessary to manually configure the bridge/ switch port to participate in the VLAN. GVRP has been superseded by the Multiple VLAN Registration Protocol (MVRP) in IEEE 802.1Q-2011, which addresses scalability concerns about the earlier protocol. The following patches add support for MVRP to the Linux kernel and iproute2 utility. They are based largely off of the existing implementation of GVRP, but have been modified for the new PDU structure and state machine. This implementation was tested with two Juniper EX4200 switches. ==================== Signed-off-by: David Ward <david.ward@ll.mit.edu> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ward authored
Initial implementation of the Multiple VLAN Registration Protocol (MVRP) from IEEE 802.1Q-2011, based on the existing implementation of the GARP VLAN Registration Protocol (GVRP). Signed-off-by: David Ward <david.ward@ll.mit.edu> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ward authored
Initial implementation of the Multiple Registration Protocol (MRP) from IEEE 802.1Q-2011, based on the existing implementation of the Generic Attribute Registration Protocol (GARP). Signed-off-by: David Ward <david.ward@ll.mit.edu> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Andy King says: ==================== In an effort to improve the out-of-the-box experience with Linux kernels for VMware users, VMware is working on readying the VM Sockets (VSOCK, formerly VMCI Sockets) (vsock) kernel module for inclusion in the Linux kernel. The purpose of this post is to acquire feedback on the vsock kernel module. Unlike previous submissions, where the new socket family was entirely reliant on VMware's VMCI PCI device (and thus VMware's hypervisor), VM Sockets is now completely[1] separated out into two parts, each in its own module: o Core socket code, which is transport-neutral and invokes transport callbacks to communicate with the hypervisor. This is vsock.ko. o A VMCI transport, which communicates over VMCI with the VMware hypervisor. This is vmw_vsock_vmci_transport.ko, and it registers with the core module as a transport. This should provide a path to introducing additional transports, for example virtio, with the ultimate goal being to make this new socket family hypervisor-neutral. [1] If Gerd tries it and determines this to be false (still), I'll ship him a keg of beer. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Andy King authored
VM Sockets allows communication between virtual machines and the hypervisor. User level applications both in a virtual machine and on the host can use the VM Sockets API, which facilitates fast and efficient communication between guest virtual machines and their host. A socket address family, designed to be compatible with UDP and TCP at the interface level, is provided. Today, VM Sockets is used by various VMware Tools components inside the guest for zero-config, network-less access to VMware host services. In addition to this, VMware's users are using VM Sockets for various applications, where network access of the virtual machine is restricted or non-existent. Examples of this are VMs communicating with device proxies for proprietary hardware running as host applications and automated testing of applications running within virtual machines. The VMware VM Sockets are similar to other socket types, like Berkeley UNIX socket interface. The VM Sockets module supports both connection-oriented stream sockets like TCP, and connectionless datagram sockets like UDP. The VM Sockets protocol family is defined as "AF_VSOCK" and the socket operations split for SOCK_DGRAM and SOCK_STREAM. For additional information about the use of VM Sockets, please refer to the VM Sockets Programming Guide available at: https://www.vmware.com/support/developer/vmci-sdk/Signed-off-by: George Zhang <georgezhang@vmware.com> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> Signed-off-by: Andy king <acking@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 08 Feb, 2013 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller authored
Synchronize with 'net' in order to sort out some l2tp, wireless, and ipv6 GRE fixes that will be built on top of in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vipul Pandya authored
This was preventing GRO and RxCheckSum offload to happen. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
In sctp_auth_make_key_vector, we allocate a temporary sctp_auth_bytes structure with kmalloc instead of the sctp_auth_create_key allocator. Change this to sctp_auth_create_key as it is the case everywhere else, so that we also can properly free it via sctp_auth_key_put. This makes it easier for future code changes in the structure and allocator itself, since a single API is consistently used for this purpose. Also, by using sctp_auth_create_key we're doing sanity checks over the arguments. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Some multicast addresses are common to all macvlans, so if a multicast message has a hash value collision, we have to deliver a copy to all macvlans, adding significant latency and possible packet drops if netdev_max_backlog limit is hit. Having a per macvlan hash function permits to reduce the impact of hash collisions. Suggested-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
commit cd431e73 (macvlan: add multicast filter) forgot the broadcast case. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Maciej Żenczykowski <maze@google.com> SIgned-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Amerigo Wang authored
This patch fixes the following RCU warning: [ 51.680236] =============================== [ 51.681914] [ INFO: suspicious RCU usage. ] [ 51.683610] 3.8.0-rc6-next-20130206-sasha-00028-g83214f7-dirty #276 Tainted: G W [ 51.686703] ------------------------------- [ 51.688281] net/ipv6/ip6_flowlabel.c:671 suspicious rcu_dereference_check() usage! we should use rcu_dereference_bh() when we hold rcu_read_lock_bh(). Reported-by: Sasha Levin <sasha.levin@oracle.com> Cc: David S. Miller <davem@davemloft.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: Cong Wang <amwang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Joe Perches authored
alloc failures already get standardized OOM messages and a dump_stack. For the affected mallocs around these OOM messages: Converted kmallocs with multiplies to kmalloc_array. Converted a kmalloc/memcpy to kmemdup. Removed now unused stack variables. Removed unnecessary parentheses. Neatened alignment. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rafał Miłecki authored
The last (bool) parameter in bgmac_cmdcfg_maskset says if the write should be made, even if value didn't change. Currently driver doesn't match the specs about (not) forcing some changes. This makes it follow them. Reported-by: Nathan Hintz <nlhintz@hotmail.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rafał Miłecki authored
This adds check for a valid Ethernet MAC address and in case it is not, it will generate a valid random one, such that the adapter is still usable. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Alexander Duyck authored
In order to address the fact that some devices cannot support the full 32K frag size we need to have the value accessible somewhere so that we can use it to do comparisons against what the device can support. As such I am moving the values out of skbuff.c and into skbuff.h. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
git://git.linaro.org/people/rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "I was going to hold these off until v3.8 was out, and send them with a stable tag, but as everyone else is pushing much bigger fixes which Linus is accepting, let's save people from the hastle of having to patch v3.8 back into working or use a stable kernel. Looking at the diffstat, this really is high value for its size; this is miniscule compared to how the -rc6 to tip diffstat currently looks. So, four patches in this set: - Punit Agrawal reports that the kernel no longer boots on MPCore due to a new assumption made in the GIC code which isn't true of earlier GIC designs. This is the biggest change in this set. - Punit's boot log also revealed a bunch of WARN_ON() dumps caused by the DT-ification of the GIC support without fixing up non-DT Realview - which now sees a greater number of interrupts than it did before. - A fix for the DMA coherent code from Marek which uses the wrong check for atomic allocations; this can result in spinlock lockups or other nasty effects. - A fix from Will, which will affect all Android based platforms if not applied (which use the 2G:2G VM split) - this causes particularly 'make' to misbehave unless this bug is fixed." * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7641/1: memory: fix broken mmap by ensuring TASK_UNMAPPED_BASE is aligned ARM: DMA mapping: fix bad atomic test ARM: realview: ensure that we have sufficient IRQs available ARM: GIC: fix GIC cpumask initialization
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Revert iwlwifi reclaimed packet tracking, it causes problems for a bunch of folks. From Emmanuel Grumbach. 2) Work limiting code in brcmsmac wifi driver can clear tx status without processing the event. From Arend van Spriel. 3) rtlwifi USB driver processes wrong SKB, fix from Larry Finger. 4) l2tp tunnel delete can race with close, fix from Tom Parkin. 5) pktgen_add_device() failures are not checked at all, fix from Cong Wang. 6) Fix unintentional removal of carrier off from tun_detach(), otherwise we confuse userspace, from Michael S. Tsirkin. 7) Don't leak socket reference counts and ubufs in vhost-net driver, from Jason Wang. 8) vmxnet3 driver gets it's initial carrier state wrong, fix from Neil Horman. 9) Protect against USB networking devices which spam the host with 0 length frames, from Bjørn Mork. 10) Prevent neighbour overflows in ipv6 for locally destined routes, from Marcelo Ricardo. This is the best short-term fix for this, a longer term fix has been implemented in net-next. 11) L2TP uses ipv4 datagram routines in it's ipv6 code, whoops. This mistake is largely because the ipv6 functions don't even have some kind of prefix in their names to suggest they are ipv6 specific. From Tom Parkin. 12) Check SYN packet drops properly in tcp_rcv_fastopen_synack(), from Yuchung Cheng. 13) Fix races and TX skb freeing bugs in via-rhine's NAPI support, from Francois Romieu and your's truly. 14) Fix infinite loops and divides by zero in TCP congestion window handling, from Eric Dumazet, Neal Cardwell, and Ilpo Järvinen. 15) AF_PACKET tx ring handling can leak kernel memory to userspace, fix from Phil Sutter. 16) Fix error handling in ipv6 GRE tunnel transmit, from Tommi Rantala. 17) Protect XEN netback driver against hostile frontend putting garbage into the rings, don't leak pages in TX GOP checking, and add proper resource releasing in error path of xen_netbk_get_requests(). From Ian Campbell. 18) SCTP authentication keys should be cleared out and released with kzfree(), from Daniel Borkmann. 19) L2TP is a bit too clever trying to maintain skb->truesize, and ends up corrupting socket memory accounting to the point where packet sending is halted indefinitely. Just remove the adjustments entirely, they aren't really needed. From Eric Dumazet. 20) ATM Iphase driver uses a data type with the same name as the S390 headers, rename to fix the build. From Heiko Carstens. 21) Fix a typo in copying the inner network header offset from one SKB to another, from Pravin B Shelar. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (56 commits) net: sctp: sctp_endpoint_free: zero out secret key data net: sctp: sctp_setsockopt_auth_key: use kzfree instead of kfree atm/iphase: rename fregt_t -> ffreg_t net: usb: fix regression from FLAG_NOARP code l2tp: dont play with skb->truesize net: sctp: sctp_auth_key_put: use kzfree instead of kfree netback: correct netbk_tx_err to handle wrap around. xen/netback: free already allocated memory on failure in xen_netbk_get_requests xen/netback: don't leak pages on failure in xen_netbk_tx_check_gop. xen/netback: shutdown the ring if it contains garbage. net: qmi_wwan: add more Huawei devices, including E320 net: cdc_ncm: add another Huawei vendor specific device ipv6/ip6_gre: fix error case handling in ip6gre_tunnel_xmit() tcp: fix for zero packets_in_flight was too broad brcmsmac: rework of mac80211 .flush() callback operation ssb: unregister gpios before unloading ssb bcma: unregister gpios before unloading bcma rtlwifi: Fix scheduling while atomic bug net: usbnet: fix tx_dropped statistics tcp: ipv6: Update MIB counters for drops ...
-
David S. Miller authored
John W. Linville says: ==================== Please accept this pull request intended for the 3.9 stream! Included are a mac80211 pull, an iwlwifi pull (actually two -- one was a fast-forward), a wl12xx pull, and a couple of Bluetooth pulls. On mac80211, Johannes says: "I've included * AKM definitions from Bing, * mesh fixes from Thomas, including a fix from him for me breaking his patch while applying, * channel check fix from Simon, * an old patch from Yoni Divinsky who doesn't even work for TI any more, to configure the WEP TX key for ARP offload etc. * MAC ACL API from Vasanth * a fix for the infamous chanctx_conf warning from Arnd * from myself, a fix for my previous aggregation changes, some cleanup and some improvements and fixes for WoWLAN" On iwlwifi, Johannes says: "Two small changes for iwlwifi-next, one to update all our Copyright notices and one to provide the RX page order." And also: "So what I have here is some cleanups, preparations and the new MVM (multi-virtual MAC) driver itself and (this is new) some work on the transport API as well as a message flooding fix." On wl12xx, Luca says: "Lots of bugfixes and improvements in our TI wireless drivers, including support for multi-channel. Intended for 3.9." On Bluetooth, Gustavo says: "This is my first pull request to 3.9. The biggest changes here are from Johan Hedberg who made a lot of fixes in the Management interface. The issues arose due to a new test tool we wrote and the usage of the Management interface as default in BlueZ 5. The rest of the patches are more clean ups and small fixes." And also: "Here goes another batch intended for 3.9, the majority of the patch here are from Johan who is fixing many issues in the management interface that have appeared lately. The rest of the patches are just small improvements, fixes and clean ups." Along with those are the usual variety of updates/enhancements to the mwl8k, mwifiex, ath9k, rtlwifi, and rt2x00 drivers as well as a few updates for the ssb and bcma busses. I don't think there are any big headliners there. Please let me know if there are problems! ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Daniel Borkmann says: ==================== Cryptographically used keys should be zeroed out when our session ends resp. memory is freed, thus do not leave them somewhere in the memory. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
On sctp_endpoint_destroy, previously used sensitive keying material should be zeroed out before the memory is returned, as we already do with e.g. auth keys when released. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
In sctp_setsockopt_auth_key, we create a temporary copy of the user passed shared auth key for the endpoint or association and after internal setup, we free it right away. Since it's sensitive data, we should zero out the key before returning the memory back to the allocator. Thus, use kzfree instead of kfree, just as we do in sctp_auth_key_put(). Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Heiko Carstens authored
We have conflicting type qualifiers for "freg_t" in s390's ptrace.h and the iphase atm device driver, which causes the compile error below. Unfortunately the s390 typedef can't be renamed, since it's a user visible api, nor can I change the include order in s390 code to avoid the conflict. So simply rename the iphase typedef to a new name. Fixes this compile error: In file included from drivers/atm/iphase.c:66:0: drivers/atm/iphase.h:639:25: error: conflicting type qualifiers for 'freg_t' In file included from next/arch/s390/include/asm/ptrace.h:9:0, from next/arch/s390/include/asm/lowcore.h:12, from next/arch/s390/include/asm/thread_info.h:30, from include/linux/thread_info.h:54, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/seqlock.h:29, from include/linux/time.h:5, from include/linux/stat.h:18, from include/linux/module.h:10, from drivers/atm/iphase.c:43: next/arch/s390/include/uapi/asm/ptrace.h:197:3: note: previous declaration of 'freg_t' was here Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
-