- 15 Oct, 2019 8 commits
-
-
Le Ma authored
Workaround to make RAS recovery work in BACO reset. Signed-off-by:
Le Ma <le.ma@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Hans de Goede authored
Bail from the pci_driver probe function instead of from the drm_driver load function. This avoid /dev/dri/card0 temporarily getting registered and then unregistered again, sending unwanted add / remove udev events to userspace. Specifically this avoids triggering the (userspace) bug fixed by this plymouth merge-request: https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/59 Note that despite that being a userspace bug, not sending unnecessary udev events is a good idea in general. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1490490Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Alex Deucher authored
Use the dcn21 functions in dcn21_resource.c and make the dcn20 functions static since they are only used in dcn20_resource now. Cc: bhawanpreet.lakha@amd.com Reviewed-by:
Harry Wentland <harry.wentland@amd.com> Signed-off-by:
-
Xiaojie Yuan authored
SMU firmware has fix the bug, so remove this workaround. Signed-off-by:
Xiaojie Yuan <xiaojie.yuan@amd.com> Acked-by:
Kevin Wang <kevin1.wang@amd.com> Signed-off-by:
-
Xiaojie Yuan authored
IP Discovery data is TMR fenced by the latest PSP BL, so we need to reserve this region. Tested on navi10/12/14 with VBIOS integrated with latest PSP BL. v2: use DISCOVERY_TMR_SIZE macro as bo size use amdgpu_bo_create_kernel_at() to allocate bo Signed-off-by: -
Kevin Wang authored
add navi14 umd pstate peak clock support. NAVI14_UMD_PSTATE_PEAK_XT_GFXCLK 1670 MHz NAVI14_UMD_PSTATE_PEAK_XTM_GFXCLK 1448 MHz NAVI14_UMD_PSTATE_PEAK_XLM_GFXCLK 1181 MHz NAVI14_UMD_PSTATE_PEAK_XTX_GFXCLK 1717 MHz NAVI14_UMD_PSTATE_PEAK_XL_GFXCLK 1448 MHz Signed-off-by:
Kenneth Feng <kenneth.feng@amd.com> Signed-off-by:
-
Evan Quan authored
Currently this is only supported on Vega20 with 40.50 and later SMC firmware. Signed-off-by:
Evan Quan <evan.quan@amd.com> Reviewed-by:
-
Evan Quan authored
Currently this is only supported on Vega20 with 40.50 and later SMC firmware. Signed-off-by:
-
- 11 Oct, 2019 32 commits
-
-
Alex Deucher authored
Add toggles for more power features. Helpful in debugging. Reviewed-by:
-
Ville Syrjälä authored
@swap@ identifier TEMP; expression A,B; @@ - TEMP = A; - A = B; - B = TEMP; + swap(A, B); @@ type T; identifier swap.TEMP; @@ ( - T TEMP; | - T TEMP = {...}; ) ... when != TEMP Cc: Rex Zhu <rex.zhu@amd.com> Cc: Evan Quan <evan.quan@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by:Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Mostly a cocci-job, but it flat out refused to remove the declaration in drivers/gpu/drm/amd/display/dc/core/dc.c so had to do that part manually. @swap@ identifier TEMP; expression A,B; @@ - TEMP = A; - A = B; - B = TEMP; + swap(A, B); @@ type T; identifier swap.TEMP; @@ ( - T TEMP; | - T TEMP = {...}; ) ... when != TEMP Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com> Cc: amd-gfx@lists.freedesktop.org Reviewed-by:Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by:
-
chen gong authored
Find that ring sdma0 test failed if turn on SDMA powergating after do mode2 reset. Perhaps the mode2 reset does not reset the SDMA PG state, SDMA is already powered up so there is no need to ask the SMU to power it up again. So I skip this function for a moment. Signed-off-by:
chen gong <curry.gong@amd.com> Reviewed-by:
-
Xiaojie Yuan authored
Additional features that can be enabled in the SMU. Signed-off-by:
-
Xiaojie Yuan authored
sdma will hang once sequence number to be polled reaches 0x1000_0000 Signed-off-by:
-
Alex Deucher authored
Polaris and vegam use count for the value rather than level. This looks like a copy paste typo from when the code was adapted from previous asics. I'm not sure that the SMU actually uses this value, so I don't know that it actually is a bug per se. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=108609Reported-by:
Robert Strube <rstrube@gmail.com> Reviewed-by:
-
Nirmoy Das authored
cleanup error handling code and make sure temporary info array with the handles are freed by amdgpu_bo_list_put() on idr_replace()'s failure. Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Tao Zhou authored
check whether a page is bad page before umc error injection, bad page should not be accessed again Signed-off-by:
Tao Zhou <tao.zhou1@amd.com> Reviewed-by:
Guchun Chen <guchun.chen@amd.com> Signed-off-by:
-
Luben Tuikov authored
Use the ALIGN() macro to set "num_dw" to a multiple of 8, i.e. lower 3 bits cleared. Signed-off-by:
Luben Tuikov <luben.tuikov@amd.com> Reviewed-by:
-
Alex Deucher authored
We recently added it, but never documented it. Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
-
Alex Deucher authored
Fix a couple of spelling typos. Reviewed-by:
-
Dmytro Laktyushkin authored
Doing this allows us to split it for diffrent asics. This design will be helpful for future Asciis. Signed-off-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by:
-
Eric Yang authored
[Why] Previously SMU was giving us 0s for the clock table. Now they have valid clock table. We should use theirs. Also, need to send SMU watermark ranges for selecting optimal watermarks. Signed-off-by:
Eric Yang <Eric.Yang2@amd.com> Signed-off-by:
-
Sung Lee authored
[WHY] Without a check for virtual links, every link's DIG was getting checked for enabled or disabled. If link was virtual, since it did not have a DIG, this would cause issues. [HOW] Skip DIG Enable check if link is virtual and add virtual link to to display count. Signed-off-by:
Sung Lee <sung.lee@amd.com> Reviewed-by:
Yongqiang Sun <yongqiang.sun@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
-
Wayne Lin authored
[Why] HDMI 2.0 requires scrambling under specific conditions. We refer to stream property LTE_340MCSC_SCRAMBLE to determine whether en/dis scrambling. While creating stream for sink, we setup LTE_340MCSC_SCRAMBLE by referring to edid_caps. However, dm_helpers_parse_edid_caps() doesn't construct HDMI Forum block data for edid_caps. Moreover, fill_stream_properties_from_drm_display_mode() aslo unconsciously clear the LTE_340MCSC_SCRAMBLE flag. [How] Drm already provides drm_display_info to refer HDMI Forum vsdb info. Set stream LTE_340MCSC_SCRAMBLE by drm_display_info and remove memset in fill_stream_properties_from_drm_display_mode() Signed-off-by:
Wayne Lin <Wayne.Lin@amd.com> Reviewed-by:
-
David Galiffi authored
[WHY] During detection: function: get_active_converter_info populates link->dpcd_caps.dongle_caps only when dpcd_rev >= DPCD_REV_11 and DWN_STRM_PORTX_TYPE is DOWN_STREAM_DETAILED_HDMI or DOWN_STREAM_DETAILED_DP_PLUS_PLUS. Otherwise, it is not cleared, and stale information remains. During mode validation: function: dp_active_dongle_validate_timing reads link->dpcd_caps.dongle_caps->dongle_type to determine the maximum pixel clock to support. This information is now stale and no longer valid. [HOW] dp_active_dongle_validate_timing should be using link->dpcd_caps->dongle_type instead. Signed-off-by:
David Galiffi <david.galiffi@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
-
Jaehyun Chung authored
[Why] Static ramp to max refresh rate does not have capability check on calculated v_total. Programming a lower v_total_min and max than the total causes continuous spurious HPDs. [How] Add a capability check after v_total calculation similar to calculate v_total helper functions. Signed-off-by:
Jaehyun Chung <jaehyun.chung@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
-
Aric Cyr authored
Signed-off-by:
Aric Cyr <aric.cyr@amd.com> Reviewed-by:
-
Xiaodong Yan authored
[why] 1. defer delay and sw start delay has been mixed up, defer delay was programmed to AUX_SW_CONTROL:AUX_SW_START_DELAY. 2. There's no delay for defer [how] 1. Set aux sw start to 0 2. Add delay for defer scenario Signed-off-by:
Xiaodong Yan <Xiaodong.Yan@amd.com> Reviewed-by:
Tony Cheng <Tony.Cheng@amd.com> Acked-by:
-
Charlene Liu authored
[Description] use vbios message to call smu for dpm level also only program dmdata in vsyncflip as HW requirement. Signed-off-by:
Charlene Liu <charlene.liu@amd.com> Reviewed-by:
-
Leo Li authored
[Why] Compiling with GCC 9.1.0 gives the following warning (I have warnings-as-errors enabled): drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc.c: In function 'dc_validate_seamless_boot_timing': drivers/gpu/drm/amd/amdgpu/../dal-dev/dc/core/dc.c:1180:8: error: 'se' may be used uninitialized in this function [-Werror=maybe-uninitialized] 1180 | if (!se->funcs->dp_get_pixel_format( | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1181 | se, | ~~~ 1182 | &hw_crtc_timing.pixel_encoding, | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1183 | &hw_crtc_timing.display_color_depth)) [How] Initialize se to NULL. Signed-off-by:Leo Li <sunpeng.li@amd.com> Reviewed-by:
-
Martin Leung authored
[why] we found using an active DP to HDMI panel that we weren't validating dp_pixel_format and hardware timing v_front_porch, causing screen to blank and/or corrupt while attempting a seamless boot. [how] added checks during dc_validate_seamless_boot_timing for these values Signed-off-by:
Martin Leung <martin.leung@amd.com> Reviewed-by:
-
Vitaly Prosyak authored
[Why & How] Dongle 0x00E04C power down all internal circuits including AUX communication preventing reading DPCD table. Encoder will skip DP RX power down on disable output to keep receiver powered all the time. Signed-off-by:
Vitaly Prosyak <vitaly.prosyak@amd.com> Reviewed-by:
-
Michael Strauss authored
[WHY] Number of audio endpoints wasn't updated from dcn20's 6 when created [HOW] Changed num_audio to 4 to match the correct sbios value Signed-off-by:
Michael Strauss <michael.strauss@amd.com> Reviewed-by:
-
Joseph Gravenor authored
[why] dp_48m_refclk_driver_pwdn is persistent through S3 and S5. This was worked arround in SMU FW 55.21.0. Earlier FW don't have this fix so we will hang on reboot [how] add a guard for smu versions before SMU FW 55.21.0 Signed-off-by:
Joseph Gravenor <joseph.gravenor@amd.com> Signed-off-by:
-
Eric Yang authored
[Why] The SMU message to enable this feature looks at argument. Previous code didn't send right argument. This change will allow the feature to be be enabled. [How] Fixed one issue where SMU message to enable the feature was sent without setting the parameter. Signed-off-by:
-
Eric Yang authored
[Why] If 48mhz refclk is turned off during PSR, we will have issue doing link training during detection. [How] Get out of PSR before detection Signed-off-by:
-
Julian Parkin authored
[Why] When diags adds a DWB via a stream update, we calculate MMHUBBUB paramaters, but dc->current_state has not yet been updated when the DWB programming happens. This leads to overflow on high bandwidth tests since the incorrect MMHUBBUB arbitration parameters are programmed. [How] Pass the updated context down to the (enable|update)_writeback functions so that they can use the correct watermarks when programming MMHUBBUB. Signed-off-by:
Julian Parkin <julian.parkin@amd.com> Reviewed-by:
-
Aric Cyr authored
Signed-off-by:
-
Wesley Chalmers authored
[WHY] dpp2_get_optimal_number_of_taps is incorrect, and dcn2 should be using dpp1_get_optimal_number_of_taps instead Signed-off-by:
Wesley Chalmers <Wesley.Chalmers@amd.com> Reviewed-by:
-
Sivapiriyan Kumarasamy authored
[Why] There is a bug when determining if link training should be retried when HPD is low in dp_verify_link_cap_with_retries. [How] Correctly, fail dp_verify_link_cap_with_retries without retry when HPD is low. Signed-off-by:
Sivapiriyan Kumarasamy <sivapiriyan.kumarasamy@amd.com> Reviewed-by:
Wenjing Liu <Wenjing.Liu@amd.com> Acked-by:
Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by:
-
