Skip to content

L
linux
Switch branch/tag
  1. 18 Jan, 2016 4 commits
    • Nicolas Boichat's avatar
      ALSA: seq: Fix snd_seq_call_port_info_ioctl in compat mode · 9586495d
      Nicolas Boichat authored 
      This reverts one hunk of
commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which
replaced a number of kmalloc followed by memcpy with memdup calls.

In this case, we are copying from a struct snd_seq_port_info32 to a
struct snd_seq_port_info, but the latter is 4 bytes longer than the
32-bit version, so we need to separate kmalloc and copy calls.

Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()')
Signed-off-by: default avatarNicolas Boichat <drinkcat@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      9586495d
    • Nicolas Boichat's avatar
      ALSA: pcm: Fix snd_pcm_hw_params struct copy in compat mode · 43c54b8c
      Nicolas Boichat authored 
      This reverts one hunk of
commit ef44a1ec ("ALSA: sound/core: use memdup_user()"), which
replaced a number of kmalloc followed by memcpy with memdup calls.

In this case, we are copying from a struct snd_pcm_hw_params32 to
a struct snd_pcm_hw_params, but the latter is 4 bytes longer than
the 32-bit version, so we need to separate kmalloc and copy calls.

This actually leads to an out-of-bounds memory access later on
in sound/soc/soc-pcm.c:soc_pcm_hw_params() (detected using KASan).

Fixes: ef44a1ec ('ALSA: sound/core: use memdup_user()')
Signed-off-by: default avatarNicolas Boichat <drinkcat@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      43c54b8c
    • Takashi Iwai's avatar
      ALSA: hrtimer: Fix stall by hrtimer_cancel() · 2ba1fe7a
      Takashi Iwai authored 
      hrtimer_cancel() waits for the completion from the callback, thus it
must not be called inside the callback itself.  This was already a
problem in the past with ALSA hrtimer driver, and the early commit
[fcfdebe7: ALSA: hrtimer - Fix lock-up] tried to address it.

However, the previous fix is still insufficient: it may still cause a
lockup when the ALSA timer instance reprograms itself in its callback.
Then it invokes the start function even in snd_timer_interrupt() that
is called in hrtimer callback itself, results in a CPU stall.  This is
no hypothetical problem but actually triggered by syzkaller fuzzer.

This patch tries to fix the issue again.  Now we call
hrtimer_try_to_cancel() at both start and stop functions so that it
won't fall into a deadlock, yet giving some chance to cancel the queue
if the functions have been called outside the callback.  The proper
hrtimer_cancel() is called in anyway at closing, so this should be
enough.
Reported-and-tested-by: default avatarDmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      2ba1fe7a
    • Takashi Iwai's avatar
      ALSA: hda - Fix bass pin fixup for ASUS N550JX · db8948e6
      Takashi Iwai authored 
      ASUS N550JX (PCI SSID 1043:13df) requires the same fixup for a bass
speaker output pin as other N550 models.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110001
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      db8948e6
  3. 15 Jan, 2016 3 commits
    • Takashi Iwai's avatar
      ALSA: timer: Code cleanup · c3b16813
      Takashi Iwai authored 
      This is a minor code cleanup without any functional changes:
- Kill keep_flag argument from _snd_timer_stop(), as all callers pass
  only it false.
- Remove redundant NULL check in _snd_timer_stop().
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      c3b16813
    • Takashi Iwai's avatar
      ALSA: timer: Harden slave timer list handling · b5a663aa
      Takashi Iwai authored 
      A slave timer instance might be still accessible in a racy way while
operating the master instance as it lacks of locking.  Since the
master operation is mostly protected with timer->lock, we should cope
with it while changing the slave instance, too.  Also, some linked
lists (active_list and ack_list) of slave instances aren't unlinked
immediately at stopping or closing, and this may lead to unexpected
accesses.

This patch tries to address these issues.  It adds spin lock of
timer->lock (either from master or slave, which is equivalent) in a
few places.  For avoiding a deadlock, we ensure that the global
slave_active_lock is always locked at first before each timer lock.

Also, ack and active_list of slave instances are properly unlinked at
snd_timer_stop() and snd_timer_close().

Last but not least, remove the superfluous call of _snd_timer_stop()
at removing slave links.  This is a noop, and calling it may confuse
readers wrt locking.  Further cleanup will follow in a later patch.

Actually we've got reports of use-after-free by syzkaller fuzzer, and
this hopefully fixes these issues.
Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      b5a663aa
    • Takashi Iwai's avatar
      ALSA: hda - Add fixup for Dell Latitidue E6540 · cf52103a
      Takashi Iwai authored 
      Another Dell model, another fixup entry: Latitude E6540 needs the same
fixup as other Latitude E series as workaround for noise problems.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=104341
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      cf52103a
  5. 14 Jan, 2016 2 commits
  7. 13 Jan, 2016 3 commits
  9. 12 Jan, 2016 5 commits
    • Takashi Iwai's avatar
      ALSA: hda - Fix white noise on Dell Latitude E5550 · 98070576
      Takashi Iwai authored 
      Dell Latitude E5550 (1028:062c) has a white noise problem like other
Latitude E models, and it gets fixed by the very same quirk as well.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=110591
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      98070576
    • Heiner Kallweit's avatar
      ALSA: hda_intel: add card number to irq description · de65360b
      Heiner Kallweit authored 
      Currently the info in /proc/interrupts doesn't allow to figure out which
interrupt belongs to which card (HDMI, PCH, ..).
Therefore add card details to the interrupt description.
With the patch the info in /proc/interrupts looks like this:

PCI-MSI 442368-edge      snd_hda_intel:card1
PCI-MSI 49152-edge      snd_hda_intel:card0

NOTE: this patch adds the new irq_descr field snd_card struct that is
filled automatically at a card object creation.  This can be used
generically for other drivers as well.  The changes for others will
follow later -- tiwai
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      de65360b
    • Takashi Iwai's avatar
      ALSA: seq: Fix race at timer setup and close · 3567eb6a
      Takashi Iwai authored 
      ALSA sequencer code has an open race between the timer setup ioctl and
the close of the client.  This was triggered by syzkaller fuzzer, and
a use-after-free was caught there as a result.

This patch papers over it by adding a proper queue->timer_mutex lock
around the timer-related calls in the relevant code path.
Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
Tested-by: default avatarDmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      3567eb6a
    • Takashi Iwai's avatar
      ALSA: seq: Fix missing NULL check at remove_events ioctl · 030e2c78
      Takashi Iwai authored 
      snd_seq_ioctl_remove_events() calls snd_seq_fifo_clear()
unconditionally even if there is no FIFO assigned, and this leads to
an Oops due to NULL dereference.  The fix is just to add a proper NULL
check.
Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
Tested-by: default avatarDmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      030e2c78
    • Takashi Iwai's avatar
      ALSA: usb-audio: Avoid calling usb_autopm_put_interface() at disconnect · 5c06d68b
      Takashi Iwai authored 
      ALSA PCM may still have a leftover instance after disconnection and
it delays its release.  The problem is that the PCM close code path of
USB-audio driver has a call of snd_usb_autosuspend().  This involves
with the call of usb_autopm_put_interface() and it may lead to a
kernel Oops due to the NULL object like:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000190
 IP: [<ffffffff815ae7ef>] usb_autopm_put_interface+0xf/0x30 PGD 0
 Call Trace:
  [<ffffffff8173bd94>] snd_usb_autosuspend+0x14/0x20
  [<ffffffff817461bc>] snd_usb_pcm_close.isra.14+0x5c/0x90
  [<ffffffff8174621f>] snd_usb_playback_close+0xf/0x20
  [<ffffffff816ef58a>] snd_pcm_release_substream.part.36+0x3a/0x90
  [<ffffffff816ef6b3>] snd_pcm_release+0xa3/0xb0
  [<ffffffff816debb0>] snd_disconnect_release+0xd0/0xe0
  [<ffffffff8114d417>] __fput+0x97/0x1d0
  [<ffffffff8114d589>] ____fput+0x9/0x10
  [<ffffffff8109e452>] task_work_run+0x72/0x90
  [<ffffffff81088510>] do_exit+0x280/0xa80
  [<ffffffff8108996a>] do_group_exit+0x3a/0xa0
  [<ffffffff8109261f>] get_signal+0x1df/0x540
  [<ffffffff81040903>] do_signal+0x23/0x620
  [<ffffffff8114c128>] ? do_readv_writev+0x128/0x200
  [<ffffffff810012e1>] prepare_exit_to_usermode+0x91/0xd0
  [<ffffffff810013ba>] syscall_return_slowpath+0x9a/0x120
  [<ffffffff817587cd>] ? __sys_recvmsg+0x5d/0x70
  [<ffffffff810d2765>] ? ktime_get_ts64+0x45/0xe0
  [<ffffffff8115dea0>] ? SyS_poll+0x60/0xf0
  [<ffffffff818d2327>] int_ret_from_sys_call+0x25/0x8f

We have already a check of disconnection in snd_usb_autoresume(), but
the check is missing its counterpart.  The fix is just to put the same
check in snd_usb_autosuspend(), too.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=109431
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      5c06d68b
  11. 11 Jan, 2016 22 commits
  13. 10 Jan, 2016 1 commit
    • Mengdong Lin's avatar
      ASoC: Make aux_dev more like a generic component · f2ed6b07
      Mengdong Lin authored 
      aux_dev is mainly used by the machine driver to specify analog devices,
which are registered as codecs. Making it more like a generic component
can help the machine driver to use it to specify any component with
topology info by name.

Details:
- Remove the stub 'rtd_aux' array from the soc card.
- Add a list 'aux_comp_list' to store the components of aux_devs.
  And add a list head 'list_aux' to struct snd_soc_component, for adding
  such components to the above list.
- Add a 'init' ops to a component for machine specific init.
  soc_bind_aux_dev() will set it to be aux_dev's init. And it will be
  called when probing the component.
- soc_bind_aux_dev() will also search components by name of an aux_dev,
  since it may not be a codec.
- Move probing of aux_devs before checking new DAI links brought by
  topology.
- Move removal of aux_devs later than removal of links. Because topology
  of aux components may register DAIs and the DAI drivers will go with
  removal of the aux components, we want soc_remove_link_dais() to remove
  the DAIs at first.
Signed-off-by: default avatarMengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
      f2ed6b07
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7