- 06 Feb, 2019 40 commits
-
-
Roger Quadros authored
commit 2486e673 upstream. When multiple instances of pcf857x chips are present, a fix up message [1] is printed during the probe of the 2nd and later instances. The issue is that the driver is using the same irq_chip data structure between multiple instances. Fix this by allocating the irq_chip data structure per instance. [1] fix up message addressed by this patch [ 1.212100] gpio gpiochip9: (pcf8575): detected irqchip that is shared with multiple gpiochips: please fix the driver. Cc: Stable <stable@vger.kernel.org> Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bartosz Golaszewski authored
commit 1033be58 upstream. Nested interrupts run inside the calling thread's context and the top half handler is never called which means that we never read the timestamp. This issue came up when trying to read line events from a gpiochip using regmap_irq_chip for interrupts. Fix it by reading the timestamp from the irq thread function if it's still 0 by the time the second handler is called. Fixes: d58f2bf2 ("gpio: Timestamp events in hardirq handler") Cc: stable@vger.kernel.org Signed-off-by:
-
Axel Lin authored
commit 2095a45e upstream. The altr_a10sr_gpio_direction_output should set proper output level based on the value argument. Fixes: 26a48c4c ("gpio: altera-a10sr: Add A10 System Resource Chip GPIO support.") Cc: <stable@vger.kernel.org> Signed-off-by:
Axel Lin <axel.lin@ingics.com> Tested by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by:
-
James Morse authored
commit f7daa9c8 upstream. During resume hibernate restores all physical memory. Any memory that is accessed with the MMU disabled needs to be cleaned to the PoC. KVMs __hyp_text was previously ommitted as it runs with the MMU enabled, but now that the hyp-stub is located in this section, we must clean __hyp_text too. This ensures secondary CPUs that come online after hibernate has finished resuming, and load KVM via the freshly written hyp-stub see the correct instructions. Signed-off-by:
James Morse <james.morse@arm.com> Cc: stable@vger.kernel.org Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
James Morse authored
commit 8fac5cbd upstream. The hyp-stub is loaded by the kernel's early startup code at EL2 during boot, before KVM takes ownership later. The hyp-stub's text is part of the regular kernel text, meaning it can be kprobed. A breakpoint in the hyp-stub causes the CPU to spin in el2_sync_invalid. Add it to the __hyp_text. Signed-off-by:
-
Catalin Marinas authored
commit 132fdc37 upstream. Commit 3b8c9f1c ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings") was aimed at fixing the I-cache invalidation for kernel mappings. However, it inadvertently caused all cache maintenance for user mappings via set_pte_at() -> __sync_icache_dcache() -> sync_icache_aliases() to call kick_all_cpus_sync(). Reported-by:
Shijith Thotton <sthotton@marvell.com> Tested-by:
Wandun Chen <chenwandun@huawei.com> Fixes: 3b8c9f1c ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings") Cc: <stable@vger.kernel.org> # 4.19.x- Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Ard Biesheuvel authored
commit 8ea23593 upstream. Commit 1598ecda ("arm64: kaslr: ensure randomized quantities are clean to the PoC") added cache maintenance to ensure that global variables set by the kaslr init routine are not wiped clean due to cache invalidation occurring during the second round of page table creation. However, if kaslr_early_init() exits early with no randomization being applied (either due to the lack of a seed, or because the user has disabled kaslr explicitly), no cache maintenance is performed, leading to the same issue we attempted to fix earlier, as far as the module_alloc_base variable is concerned. Note that module_alloc_base cannot be initialized statically, because that would cause it to be subject to a R_AARCH64_RELATIVE relocation, causing it to be overwritten by the second round of KASLR relocation processing. Fixes: f80fb3a3 ("arm64: add support for kernel ASLR") Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
-
Koen Vandeputte authored
commit 65dbb423 upstream. Originally, cns3xxx used its own functions for mapping, reading and writing config registers. Commit 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config accessors") removed the internal PCI config write function in favor of the generic one: cns3xxx_pci_write_config() --> pci_generic_config_write() cns3xxx_pci_write_config() expected aligned addresses, being produced by cns3xxx_pci_map_bus() while the generic one pci_generic_config_write() actually expects the real address as both the function and hardware are capable of byte-aligned writes. This currently leads to pci_generic_config_write() writing to the wrong registers. For instance, upon ath9k module loading: - driver ath9k gets loaded - The driver wants to write value 0xA8 to register PCI_LATENCY_TIMER, located at 0x0D - cns3xxx_pci_map_bus() aligns the address to 0x0C - pci_generic_config_write() effectively writes 0xA8 into register 0x0C (CACHE_LINE_SIZE) Fix the bug by removing the alignment in the cns3xxx mapping function. Fixes: 802b7c06 ("ARM: cns3xxx: Convert PCI to use generic config accessors") Signed-off-by:
Koen Vandeputte <koen.vandeputte@ncentric.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
Krzysztof Halasa <khalasa@piap.pl> Acked-by:
Tim Harvey <tharvey@gateworks.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> CC: stable@vger.kernel.org # v4.0+ CC: Bjorn Helgaas <bhelgaas@google.com> CC: Olof Johansson <olof@lixom.net> CC: Robin Leblon <robin.leblon@ncentric.com> CC: Rob Herring <robh@kernel.org> CC: Russell King <linux@armlinux.org.uk> Signed-off-by:
-
Trond Myklebust authored
commit 8fc75bed upstream. Ensure that we return the fatal error value that caused us to exit nfs_page_async_flush(). Fixes: c373fff7 ("NFSv4: Don't special case "launder"") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Cc: stable@vger.kernel.org # v4.12+ Reviewed-by:
Benjamin Coddington <bcodding@redhat.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Kees Cook authored
commit ed5f1326 upstream. Passing EPERM during syscall skipping was confusing since the test wasn't actually exercising the errno evaluation -- it was just passing a literal "1" (EPERM). Instead, expand the tests to check both direct value returns (positive, 45000 in this case), and errno values (negative, -ESRCH in this case) to check both fake success and fake failure during syscall skipping. Reported-by:
Colin Ian King <colin.king@canonical.com> Fixes: a33b2d03 ("selftests/seccomp: Add tests for basic ptrace actions") Cc: stable@vger.kernel.org Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Gerald Schaefer authored
commit 198bc325 upstream. Commit 9d3a4de4 ("iommu: Disambiguate MSI region types") changed the reserved region type in intel_iommu_get_resv_regions() from IOMMU_RESV_RESERVED to IOMMU_RESV_MSI, but it forgot to also change the type in intel_iommu_put_resv_regions(). This leads to a memory leak, because now the check in intel_iommu_put_resv_regions() for IOMMU_RESV_RESERVED will never be true, and no allocated regions will be freed. Fix this by changing the region type in intel_iommu_put_resv_regions() to IOMMU_RESV_MSI, matching the type of the allocated regions. Fixes: 9d3a4de4 ("iommu: Disambiguate MSI region types") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by:
Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by:
Eric Auger <eric.auger@redhat.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Waiman Long authored
commit 1dbd449c upstream. The nr_dentry_unused per-cpu counter tracks dentries in both the LRU lists and the shrink lists where the DCACHE_LRU_LIST bit is set. The shrink_dcache_sb() function moves dentries from the LRU list to a shrink list and subtracts the dentry count from nr_dentry_unused. This is incorrect as the nr_dentry_unused count will also be decremented in shrink_dentry_list() via d_shrink_del(). To fix this double decrement, the decrement in the shrink_dcache_sb() function is taken out. Fixes: 4e717f5c ("list_lru: remove special case function list_lru_dispose_all." Cc: stable@kernel.org Signed-off-by:
Waiman Long <longman@redhat.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Pavel Shilovsky authored
commit 082aaa87 upstream. When doing reads beyound the end of a file the server returns error STATUS_END_OF_FILE error which is mapped to -ENODATA. Currently we report it as a failure which confuses read stats. Change it to not consider -ENODATA as failure for stat purposes. Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Pavel Shilovsky authored
commit 7d42e72f upstream. Currently we log success once we send an async IO request to the server. Instead we need to analyse a response and then log success or failure for a particular command. Also fix argument list for read logging. Cc: <stable@vger.kernel.org> # 4.18 Signed-off-by:
-
Pavel Shilovsky authored
commit 8e6e72ae upstream. Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit 5050471d I had to fold commit df133f3f ("virtio_net: bulk free tx skbs") into this to make it work. ] We do not reset or free up unused buffers when enabling/disabling XDP, so it can happen that xdp_frames are freed after disabling XDP or sk_buffs are freed after enabling XDP on xdp tx queues. Thus we need to handle both forms (xdp_frames and sk_buffs) regardless of XDP setting. One way to trigger this problem is to disable XDP when napi_tx is enabled. In that case, virtnet_xdp_set() calls virtnet_napi_enable() which kicks NAPI. The NAPI handler will call virtnet_poll_cleantx() which invokes free_old_xmit_skbs() for queues which have been used by XDP. Note that even with this change we need to keep skipping free_old_xmit_skbs() from NAPI handlers when XDP is enabled, because XDP tx queues do not aquire queue locks. - v2: Use napi_consume_skb() instead of dev_consume_skb_any() Fixes: 4941d472 ("virtio-net: do not reset during XDP set") Signed-off-by:
Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by:
Jason Wang <jasowang@redhat.com> Acked-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit 07b344f4 ] put_page() can work as a fallback for freeing xdp_frames, but the appropriate way is to use xdp_return_frame(). Fixes: cac320c8 ("virtio_net: convert to use generic xdp_frame and xdp_return_frame API") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
-
Toshiaki Makita authored
[ Upstream commit 03aa6d34 ] Commit 8dcc5b0a ("virtio_net: fix ndo_xdp_xmit crash towards dev not ready for XDP") tried to avoid access to unexpected sq while XDP is disabled, but was not complete. There was a small window which causes out of bounds sq access in virtnet_xdp_xmit() while disabling XDP. An example case of - curr_queue_pairs = 6 (2 for SKB and 4 for XDP) - online_cpu_num = xdp_queue_paris = 4 when XDP is enabled: CPU 0 CPU 1 (Disabling XDP) (Processing redirected XDP frames) virtnet_xdp_xmit() virtnet_xdp_set() _virtnet_set_queues() set curr_queue_pairs (2) check if rq->xdp_prog is not NULL virtnet_xdp_sq(vi) qp = curr_queue_pairs - xdp_queue_pairs + smp_processor_id() = 2 - 4 + 1 = -1 sq = &vi->sq[qp] // out of bounds access set xdp_queue_pairs (0) rq->xdp_prog = NULL Basically we should not change curr_queue_pairs and xdp_queue_pairs while someone can read the values. Thus, when disabling XDP, assign NULL to rq->xdp_prog first, and wait for RCU grace period, then change xxx_queue_pairs. Note that we need to keep the current order when enabling XDP though. - v2: Make rcu_assign_pointer/synchronize_net conditional instead of _virtnet_set_queues. Fixes: 186b3c99 ("virtio-net: support XDP_REDIRECT") Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit 1667c08a ] When XDP is disabled, curr_queue_pairs + smp_processor_id() can be larger than max_queue_pairs. There is no guarantee that we have enough XDP send queues dedicated for each cpu when XDP is disabled, so do not count drops on sq in that case. Fixes: 5b8f3c8d ("virtio_net: Add XDP related stats") Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit 188313c1 ] When _virtnet_set_queues() failed we did not restore real_num_rx_queues. Fix this by placing the change of real_num_rx_queues after _virtnet_set_queues(). This order is also in line with virtnet_set_channels(). Fixes: 4941d472 ("virtio-net: do not reset during XDP set") Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit 534da5e8 ] When napi_tx is enabled, virtnet_poll_cleantx() called free_old_xmit_skbs() even for xdp send queue. This is bogus since the queue has xdp_frames, not sk_buffs, thus mangled device tx bytes counters because skb->len is meaningless value, and even triggered oops due to general protection fault on freeing them. Since xdp send queues do not aquire locks, old xdp_frames should be freed only in virtnet_xdp_xmit(), so just skip free_old_xmit_skbs() for xdp send queues. Similarly virtnet_poll_tx() called free_old_xmit_skbs(). This NAPI handler is called even without calling start_xmit() because cb for tx is by default enabled. Once the handler is called, it enabled the cb again, and then the handler would be called again. We don't need this handler for XDP, so don't enable cb as well as not calling free_old_xmit_skbs(). Also, we need to disable tx NAPI when disabling XDP, so virtnet_poll_tx() can safely access curr_queue_pairs and xdp_queue_pairs, which are not atomically updated while disabling XDP. Fixes: b92f1e67 ("virtio-net: transmit napi") Fixes: 7b0411ef ("virtio-net: clean tx descriptors from rx napi") Signed-off-by:
-
Toshiaki Makita authored
[ Upstream commit 8be4d9a4 ] Commit 4e09ff53 ("virtio-net: disable NAPI only when enabled during XDP set") tried to fix inappropriate NAPI enabling/disabling when !netif_running(), but was not complete. On error path virtio_net could enable NAPI even when !netif_running(). This can cause enabling NAPI twice on virtnet_open(), which would trigger BUG_ON() in napi_enable(). Fixes: 4941d472 ("virtio-net: do not reset during XDP set") Signed-off-by:
-
Xin Long authored
[ Upstream commit ecf938fe ] Now sctp_transport_pmtu() passes transport->saddr into .get_dst() to set flow sport from 'saddr'. However, transport->saddr is set only when transport->dst exists in sctp_transport_route(). If sctp_transport_pmtu() is called without transport->saddr set, like when transport->dst doesn't exists, the flow sport will be set to 0 from transport->saddr, which will cause a wrong route to be got. Commit 6e91b578 ("sctp: re-use sctp_transport_pmtu in sctp_transport_route") made the issue be triggered more easily since sctp_transport_pmtu() would be called in sctp_transport_route() after that. In gerneral, fl4->fl4_sport should always be set to htons(asoc->base.bind_addr.port), unless transport->asoc doesn't exist in sctp_v4/6_get_dst(), which is the case: sctp_ootb_pkt_new() -> sctp_transport_route() For that, we can simply handle it by setting flow sport from saddr only when it's 0 in sctp_v4/6_get_dst(). Fixes: 6e91b578 ("sctp: re-use sctp_transport_pmtu in sctp_transport_route") Reported-by:
Ying Xu <yinxu@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 4ff40b86 ] In the paths: sctp_sf_do_unexpected_init() -> sctp_make_init_ack() sctp_sf_do_dupcook_a/b()() -> sctp_sf_do_5_1D_ce() The new chunk 'retval' transport is set from the incoming chunk 'chunk' transport. However, 'retval' transport belong to the new asoc, which is a different one from 'chunk' transport's asoc. It will cause that the 'retval' chunk gets set with a wrong transport. Later when sending it and because of Commit b9fd6839 ("sctp: add sctp_packet_singleton"), sctp_packet_singleton() will set some fields, like vtag to 'retval' chunk from that wrong transport's asoc. This patch is to fix it by setting 'retval' transport correctly which belongs to the right asoc in sctp_make_init_ack() and sctp_sf_do_5_1D_ce(). Fixes: b9fd6839 ("sctp: add sctp_packet_singleton") Reported-by:
-
Bodong Wang authored
[ Upstream commit 4e046de0 ] This reverts commit 5f5991f3. With the original commit, eswitch instance will not be initialized for a function which is vport group manager but not eswitch manager such as host PF on SmartNIC (BlueField) card. This will result in a kernel crash when such a vport group manager is trying to access vports in its group. E.g, PF vport manager (not eswitch manager) tries to configure the MAC of its VF vport, a kernel trace will happen similar as bellow: BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 ... RIP: 0010:mlx5_eswitch_get_vport_config+0xc/0x180 [mlx5_core] ... Fixes: 5f5991f3 ("net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager") Signed-off-by:
Bodong Wang <bodong@mellanox.com> Reported-by:
Yuval Avnery <yuvalav@mellanox.com> Reviewed-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Nir Dotan authored
[ Upstream commit 146820cc ] When the MC route socket is closed, mroute_clean_tables() is called to cleanup existing routes. Mistakenly notifiers call was put on the cleanup of the unresolved MC route entries cache. In a case where the MC socket closes before an unresolved route expires, the notifier call leads to a crash, caused by the driver trying to increment a non initialized refcount_t object [1] and then when handling is done, to decrement it [2]. This was detected by a test recently added in commit 6d4efada ("selftests: forwarding: Add multicast routing test"). Fix that by putting notifiers call on the resolved entries traversal, instead of on the unresolved entries traversal. [1] [ 245.748967] refcount_t: increment on 0; use-after-free. [ 245.754829] WARNING: CPU: 3 PID: 3223 at lib/refcount.c:153 refcount_inc_checked+0x2b/0x30 ... [ 245.802357] Hardware name: Mellanox Technologies Ltd. MSN2740/SA001237, BIOS 5.6.5 06/07/2016 [ 245.811873] RIP: 0010:refcount_inc_checked+0x2b/0x30 ... [ 245.907487] Call Trace: [ 245.910231] mlxsw_sp_router_fib_event.cold.181+0x42/0x47 [mlxsw_spectrum] [ 245.917913] notifier_call_chain+0x45/0x7 [ 245.922484] atomic_notifier_call_chain+0x15/0x20 [ 245.927729] call_fib_notifiers+0x15/0x30 [ 245.932205] mroute_clean_tables+0x372/0x3f [ 245.936971] ip6mr_sk_done+0xb1/0xc0 [ 245.940960] ip6_mroute_setsockopt+0x1da/0x5f0 ... [2] [ 246.128487] refcount_t: underflow; use-after-free. [ 246.133859] WARNING: CPU: 0 PID: 7 at lib/refcount.c:187 refcount_sub_and_test_checked+0x4c/0x60 [ 246.183521] Hardware name: Mellanox Technologies Ltd. MSN2740/SA001237, BIOS 5.6.5 06/07/2016 ... [ 246.193062] Workqueue: mlxsw_core_ordered mlxsw_sp_router_fibmr_event_work [mlxsw_spectrum] [ 246.202394] RIP: 0010:refcount_sub_and_test_checked+0x4c/0x60 ... [ 246.298889] Call Trace: [ 246.301617] refcount_dec_and_test_checked+0x11/0x20 [ 246.307170] mlxsw_sp_router_fibmr_event_work.cold.196+0x47/0x78 [mlxsw_spectrum] [ 246.315531] process_one_work+0x1fa/0x3f0 [ 246.320005] worker_thread+0x2f/0x3e0 [ 246.324083] kthread+0x118/0x130 [ 246.327683] ? wq_update_unbound_numa+0x1b0/0x1b0 [ 246.332926] ? kthread_park+0x80/0x80 [ 246.337013] ret_from_fork+0x1f/0x30 Fixes: 088aa3ee ("ip6mr: Support fib notifications") Signed-off-by:
Nir Dotan <nird@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
Aya Levin authored
[ Upstream commit 9d2cbdc5 ] Prior to this patch the driver prohibited spoof checking on invalid MAC. Now the user can set this configuration if it wishes to. This is required since libvirt might invalidate the VF Mac by setting it to zero, while spoofcheck is ON. Fixes: 1ab2068a ("net/mlx5: Implement vports admin state backup/restore") Signed-off-by:
Aya Levin <ayal@mellanox.com> Reviewed-by:
Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 8220c870 ] This patch is to improve sctp stream adding events in 2 places: 1. In sctp_process_strreset_addstrm_out(), move up SCTP_MAX_STREAM and in stream allocation failure checks, as the adding has to succeed after reconf_timer stops for the in stream adding request retransmission. 3. In sctp_process_strreset_addstrm_in(), no event should be sent, as no in or out stream is added here. Fixes: 50a41591 ("sctp: implement receiver-side procedures for the Add Outgoing Streams Request Parameter") Fixes: c5c4ebb3 ("sctp: implement receiver-side procedures for the Add Incoming Streams Request Parameter") Reported-by:
-
Lorenzo Bianconi authored
[ Upstream commit c706863b ] As Erspan_v4, Erspan_v6 protocol relies on o_key to configure session id header field. However TUNNEL_KEY bit is cleared in ip6erspan_tunnel_xmit since ERSPAN protocol does not set the key field of the external GRE header and so the configured o_key is not reported to userspace. The issue can be triggered with the following reproducer: $ip link add ip6erspan1 type ip6erspan local 2000::1 remote 2000::2 \ key 1 seq erspan_ver 1 $ip link set ip6erspan1 up ip -d link sh ip6erspan1 ip6erspan1@NONE: <BROADCAST,MULTICAST> mtu 1422 qdisc noop state DOWN mode DEFAULT link/ether ba:ff:09:24:c3:0e brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500 ip6erspan remote 2000::2 local 2000::1 encaplimit 4 flowlabel 0x00000 ikey 0.0.0.1 iseq oseq Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in ip6gre_fill_info Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by:
-
Jason Wang authored
[ Upstream commit b46a0bf7 ] After batched used ring updating was introduced in commit e2b3b35e ("vhost_net: batch used ring update in rx"). We tend to batch heads in vq->heads for more than one packet. But the quota passed to get_rx_bufs() was not correctly limited, which can result a OOB write in vq->heads. headcount = get_rx_bufs(vq, vq->heads + nvq->done_idx, vhost_len, &in, vq_log, &log, likely(mergeable) ? UIO_MAXIOV : 1); UIO_MAXIOV was still used which is wrong since we could have batched used in vq->heads, this will cause OOB if the next buffer needs more than 960 (1024 (UIO_MAXIOV) - 64 (VHOST_NET_BATCH)) heads after we've batched 64 (VHOST_NET_BATCH) heads: Acked-by:
Stefan Hajnoczi <stefanha@redhat.com> ============================================================================= BUG kmalloc-8k (Tainted: G B ): Redzone overwritten ----------------------------------------------------------------------------- INFO: 0x00000000fd93b7a2-0x00000000f0713384. First byte 0xa9 instead of 0xcc INFO: Allocated in alloc_pd+0x22/0x60 age=3933677 cpu=2 pid=2674 kmem_cache_alloc_trace+0xbb/0x140 alloc_pd+0x22/0x60 gen8_ppgtt_create+0x11d/0x5f0 i915_ppgtt_create+0x16/0x80 i915_gem_create_context+0x248/0x390 i915_gem_context_create_ioctl+0x4b/0xe0 drm_ioctl_kernel+0xa5/0xf0 drm_ioctl+0x2ed/0x3a0 do_vfs_ioctl+0x9f/0x620 ksys_ioctl+0x6b/0x80 __x64_sys_ioctl+0x11/0x20 do_syscall_64+0x43/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 INFO: Slab 0x00000000d13e87af objects=3 used=3 fp=0x (null) flags=0x200000000010201 INFO: Object 0x0000000003278802 @offset=17064 fp=0x00000000e2e6652b Fixing this by allocating UIO_MAXIOV + VHOST_NET_BATCH iovs for vhost-net. This is done through set the limitation through vhost_dev_init(), then set_owner can allocate the number of iov in a per device manner. This fixes CVE-2018-16880. Fixes: e2b3b35e ("vhost_net: batch used ring update in rx") Signed-off-by:
-
Mathias Thore authored
[ Upstream commit e15aa3b2 ] After a timeout event caused by for example a broadcast storm, when the MAC and PHY are reset, the BQL TX queue needs to be reset as well. Otherwise, the device will exhibit severe performance issues even after the storm has ended. Co-authored-by:
David Gounaris <david.gounaris@infinera.com> Signed-off-by:
Mathias Thore <mathias.thore@infinera.com> Signed-off-by:
-
George Amanakis authored
[ Upstream commit 3a03cb84 ] Call tun_set_real_num_queues() after the increment of tun->numqueues since the former depends on it. Otherwise, the number of queues is not correctly accounted for, which results to warnings similar to: "vnet0 selects TX queue 11, but real number of TX queues is 11". Fixes: 0b7959b6 ("tun: publish tfile after it's fully initialized") Reported-and-tested-by:
George Amanakis <gamanakis@gmail.com> Signed-off-by:
Stanislav Fomichev <sdf@google.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit 2e6dc4d9 ] This patch is to improve sctp stream reset events in 4 places: 1. In sctp_process_strreset_outreq(), the flag should always be set with SCTP_STREAM_RESET_INCOMING_SSN instead of OUTGOING, as receiver's in stream is reset here. 2. In sctp_process_strreset_outreq(), move up SCTP_STRRESET_ERR_WRONG_SSN check, as the reset has to succeed after reconf_timer stops for the in stream reset request retransmission. 3. In sctp_process_strreset_inreq(), no event should be sent, as no in or out stream is reset here. 4. In sctp_process_strreset_resp(), SCTP_STREAM_RESET_INCOMING_SSN or OUTGOING event should always be sent for stream reset requests, no matter it fails or succeeds to process the request. Fixes: 81054476 ("sctp: implement receiver-side procedures for the Outgoing SSN Reset Request Parameter") Fixes: 16e1a919 ("sctp: implement receiver-side procedures for the Incoming SSN Reset Request Parameter") Fixes: 11ae76e6 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by:
-
Simon Horman authored
[ Upstream commit 12da6430 ] EtherAVB may provide a checksum of packet data appended to packet data. In order to allow this checksum to be received by the host descriptor data needs to be enlarged by 2 bytes to accommodate the checksum. In the case of MTU-sized packets without a VLAN tag the checksum were already accommodated by virtue of the space reserved for the VLAN tag. However, a packet of MTU-size with a VLAN tag consumed all packet data space provided by a descriptor leaving no space for the trailing checksum. This was not detected by the driver which incorrectly used the last two bytes of packet data as the checksum and truncate the packet by two bytes. This resulted all such packets being dropped. A work around is to disable RX checksum offload # ethtool -K eth0 rx off This patch resolves this problem by increasing the size available for packet data in RX descriptors by two bytes. Tested on R-Car E3 (r8a77990) ES1.0 based Ebisu-4D board v2 * Use sizeof(__sum16) directly rather than adding a driver-local #define for the size of the checksum provided by the hw (2 bytes). Fixes: 4d86d381 ("ravb: RX checksum offload") Signed-off-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Josh Elsasser authored
[ Upstream commit 35edfdc7 ] Assign a default net namespace to netdevs created by init_dummy_netdev(). Fixes a NULL pointer dereference caused by busy-polling a socket bound to an iwlwifi wireless device, which bumps the per-net BUSYPOLLRXPACKETS stat if napi_poll() received packets: BUG: unable to handle kernel NULL pointer dereference at 0000000000000190 IP: napi_busy_loop+0xd6/0x200 Call Trace: sock_poll+0x5e/0x80 do_sys_poll+0x324/0x5a0 SyS_poll+0x6c/0xf0 do_syscall_64+0x6b/0x1f0 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 Fixes: 7db6b048 ("net: Commonize busy polling code to focus on napi_id instead of socket") Signed-off-by:
Josh Elsasser <jelsasser@appneta.com> Signed-off-by:
-
Bernard Pidoux authored
[ Upstream commit b0cf0292 ] When an internally generated frame is handled by rose_xmit(), rose_route_frame() is called: if (!rose_route_frame(skb, NULL)) { dev_kfree_skb(skb); stats->tx_errors++; return NETDEV_TX_OK; } We have the same code sequence in Net/Rom where an internally generated frame is handled by nr_xmit() calling nr_route_frame(skb, NULL). However, in this function NULL argument is tested while it is not in rose_route_frame(). Then kernel panic occurs later on when calling ax25cmp() with a NULL ax25_cb argument as reported many times and recently with syzbot. We need to test if ax25 is NULL before using it. Testing: Built kernel with CONFIG_ROSE=y. Signed-off-by:
Bernard Pidoux <f6bvp@free.fr> Acked-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by: syzbot+1a2c456a1ea08fa5b5f7@syzkaller.appspotmail.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Bernard Pidoux <f6bvp@free.fr> Cc: linux-hams@vger.kernel.org Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Cong Wang authored
[ Upstream commit 63346650 ] sk_reset_timer() and sk_stop_timer() properly handle sock refcnt for timer function. Switching to them could fix a refcounting bug reported by syzbot. Reported-and-tested-by: syzbot+defa700d16f1bd1b9a05@syzkaller.appspotmail.com Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-hams@vger.kernel.org Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Aya Levin authored
[ Upstream commit a40ded60 ] Driver reads the query HCA capabilities without the corresponding masks. Without the correct masks, the base addresses of the queues are unaligned. In addition some reserved bits were wrongly read. Using the correct masks, ensures alignment of the base addresses and allows future firmware versions safe use of the reserved bits. Fixes: ab9c17a0 ("mlx4_core: Modify driver initialization flow to accommodate SRIOV for Ethernet") Fixes: 0ff1fb65 ("{NET, IB}/mlx4: Add device managed flow steering firmware API") Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit cb73ee40 ] Use ERSPAN key header field as tunnel key in gre_parse_header routine since ERSPAN protocol sets the key field of the external GRE header to 0 resulting in a tunnel lookup fail in ip6gre_err. In addition remove key field parsing and pskb_may_pull check in erspan_rcv and ip6erspan_rcv Fixes: 5a963eb6 ("ip6_gre: Add ERSPAN native tunnel support") Signed-off-by:
-
Lorenzo Bianconi authored
[ Upstream commit feaf5c79 ] Erspan protocol (version 1 and 2) relies on o_key to configure session id header field. However TUNNEL_KEY bit is cleared in erspan_xmit since ERSPAN protocol does not set the key field of the external GRE header and so the configured o_key is not reported to userspace. The issue can be triggered with the following reproducer: $ip link add erspan1 type erspan local 192.168.0.1 remote 192.168.0.2 \ key 1 seq erspan_ver 1 $ip link set erspan1 up $ip -d link sh erspan1 erspan1@NONE: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc pfifo_fast state UNKNOWN mode DEFAULT link/ether 52:aa:99:95:9a:b5 brd ff:ff:ff:ff:ff:ff promiscuity 0 minmtu 68 maxmtu 1500 erspan remote 192.168.0.2 local 192.168.0.1 ttl inherit ikey 0.0.0.1 iseq oseq erspan_index 0 Fix the issue adding TUNNEL_KEY bit to the o_flags parameter in ipgre_fill_info Fixes: 84e54fe0 ("gre: introduce native tunnel support for ERSPAN") Signed-off-by:
-
