stih407 SoC have a dedicated hardware cursor plane,
this patch enable it.
The hardware have a color look up table, fix it to
be able to use ARGB8888.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

For stih407 SoC enable the second mixer to get two CRTC.
Allow GPD planes and encoders to be connected to this new CRTC.
Cursor plane can only be set on first CRTC.
GPD clocks needed change the parent clock depending on which
CRTC GPD are used.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

The HDMI path introduce a delay of 6 pixels.
This delay should be take into account while programming
VTG for the HDMI. Without this delay, the HDMI active
window area is shift of 6 pixel on the right.

Set also timing for DVO output.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

Change some functions prototype to prepare the introduction of
auxiliary crtc. It will also help to have a DVO encoder.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

Make sure that vblank is enabled when crtc commit is call.
Replace drm_vblank_off() by drm_crtc_vblank_off()
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

The hardware expect to have the infoframe checksum in the first byte.
In consequence shift all infoframe on one byte.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

Stop use event_lock in vblank disable function.
This was creating a dead lock.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

Store the physical address at node creation time
to avoid use of virt_to_dma and dma_to_virt everywhere
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

Make sure that mixer control register is correctly reset
before use it.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

gpio used for HDMI hot plug detection is useless,
HDMI_STI register contains an hot plug detection status bit.
Fix binding documentation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

Depending of the board configuration i2c for ddc could change,
this patch allow to use a phandle to specify which i2c controller to use.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>

And fix a spelling mistake.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge drm core fixes from Daniel.

* tag 'topic/core-stuff-2014-12-10' of git://anongit.freedesktop.org/drm-intel:
  drm: Zero out DRM object memory upon cleanup
  drm: fix a typo in a comment
  drm: fix a word repetition in a comment
  drm: Fix memory leak at error path of drm_read()
  drm/Documentation: Fix rowspan value in drm-kms-properties
  drm/edid: Restore kerneldoc consistency
  drm/edid: new drm_edid_block_checksum helper function V3
  drm/edid: shorten log output in case of all zeroes edid block
  drm/edid: move drm_edid_is_zero to top, make edid argument const

Drivers where the DRM objects have a lifetime that extends beyond that
of the DRM device need to zero out the DRM object memory to void stale
data such as properties. The DRM core code expects to operate on newly
allocated and zeroed out objects and will behave unexpectedly, such as
add duplicate properties, otherwise.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Spotted while reviewing the DRM changes in Linux 3.18 for LinuxFR.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Spotted while reviewing the DRM changes in Linux 3.18 for LinuxFR.

CC: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge mst tiling patches and MST fixes

* 'drm-mst-next' of ssh://people.freedesktop.org/~/linux:
  drm/fb: add support for tiled monitor configurations. (v2)
  drm/tile: expose the tile property to userspace (v3)
  drm/connector: store tile information from displayid (v3)
  drm/mst: cached EDID for logical ports (v2)
  drm: add tile_group support. (v3)
  drm/displayid: add displayid defines and edid extension (v2)
  drm/dp-mst: Remove branches before dropping the reference
  drm/fb_helper: move deferred fb checking into restore mode (v2)
  drm/dp: retry AUX transactions 32 times (v1.1)

This adds fbdev/con support for tiled monitors, so that we
only set a mode on the correct half of the monitor, or
span the two halves if needed.

v2: remove unneeded ERROR, fix | vs ||
Signed-off-by: Dave Airlie <airlied@redhat.com>

This takes the tiling info from the connector and
exposes it to userspace, as a blob object in a
connector property.

The contents of the blob is ABI.

v2: add property + function documentation.

v3: move property setup from previous patch.
add boilerplate + fix long line (Daniel)
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This creates a tile group from DisplayID block, and
stores the pieces of parsed info from the DisplayID block
into the connector.

v2: add missing signoff, add new connector bits to docs.

v3: remove some debugging.
Signed-off-by: Dave Airlie <airlied@redhat.com>

Logical ports are never going to have EDID changes,
they are used for the internal ports on MST monitors.

We cache the EDIDs from these to save time at MST probe.

v2: drop misplace tile property line, meant for other patch.
Signed-off-by: Dave Airlie <airlied@redhat.com>

A tile group is an identifier shared by a single monitor,
DisplayID topology has 8 bytes we can use for this, just
use those for now until something else comes up in the
future. We assign these to an idr and use the idr to
tell userspace what connectors are in the same tile group.

DisplayID v1.3 says the serial number must be unique for
displays from the same manufacturer.

v2:
destroy idr (dvdhrm)
add docbook (danvet)
airlied:- not sure how to make docbook add fns to tile group section.

v3: fix missing unlock.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

These are just taken from the DisplayID v1.3 spec, and the
DDC spec.

v2: use __packed (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>

When we unplug a dp mst branch we unreference the entire tree from
the root towards the leaves. Which is ok, since that's the way the
pointers and so also the refcounts go.

But when we drop the reference we must make sure that we remove the
branches/ports from the lists/pointers before dropping the reference.
Otherwise the get_validated functions will still return it instead
of returning NULL (which indicates a potentially on-going unplug).

The mst branch destroy gets this right for ports: First it deletes
the port from the ports list, then it unrefs. But the ports destroy
function gets it wrong: First it unrefs, then it drops the ref. Which
means a zombie mst branch can still be validate with get_validated_mstb_ref
when it shouldn't.

Fix this.

This should address a backtrace Dave dug out somewhere on unplug:

 [<ffffffffa00cc262>] drm_dp_mst_get_validated_mstb_ref_locked+0x92/0xa0 [drm_kms_helper]
 [<ffffffffa00cc211>] drm_dp_mst_get_validated_mstb_ref_locked+0x41/0xa0 [drm_kms_helper]
 [<ffffffffa00cc2aa>] drm_dp_get_validated_mstb_ref+0x3a/0x60 [drm_kms_helper]
 [<ffffffffa00cc2fb>] drm_dp_payload_send_msg.isra.14+0x2b/0x100 [drm_kms_helper]
 [<ffffffffa00cc547>] drm_dp_update_payload_part1+0x177/0x360 [drm_kms_helper]
 [<ffffffffa015c52e>] intel_mst_disable_dp+0x3e/0x80 [i915]
 [<ffffffffa013d60b>] haswell_crtc_disable+0x1cb/0x340 [i915]
 [<ffffffffa0136739>] intel_crtc_control+0x49/0x100 [i915]
 [<ffffffffa0136857>] intel_crtc_update_dpms+0x67/0x80 [i915]
 [<ffffffffa013fa59>] intel_connector_dpms+0x59/0x70 [i915]
 [<ffffffffa015c752>] intel_dp_destroy_mst_connector+0x32/0xc0 [i915]
 [<ffffffffa00cb44b>] drm_dp_destroy_port+0x6b/0xa0 [drm_kms_helper]
 [<ffffffffa00cb588>] drm_dp_destroy_mst_branch_device+0x108/0x130 [drm_kms_helper]
 [<ffffffffa00cb3cd>] drm_dp_port_teardown_pdt+0x3d/0x50 [drm_kms_helper]
 [<ffffffffa00cdb79>] drm_dp_mst_handle_up_req+0x499/0x540 [drm_kms_helper]
 [<ffffffff810d9ead>] ? trace_hardirqs_on_caller+0x15d/0x200 [<ffffffffa00cdc73>]
 drm_dp_mst_hpd_irq+0x53/0xa00 [drm_kms_helper] [<ffffffffa00c7dfb>]
 ? drm_dp_dpcd_read+0x1b/0x20 [drm_kms_helper] [<ffffffffa0153ed8>]
 ? intel_dp_dpcd_read_wake+0x38/0x70 [i915] [<ffffffffa015a225>]
 intel_dp_check_mst_status+0xb5/0x250 [i915] [<ffffffffa015ac71>]
 intel_dp_hpd_pulse+0x181/0x210 [i915] [<ffffffffa01104f6>]
 i915_digport_work_func+0x96/0x120 [i915]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

On MST systems the monitors don't appear when we set the fb up,
but plymouth opens the drm device and holds it open while they
come up, when plymouth finishes and lastclose gets called we
don't do the delayed fb probe, so the monitor never appears on the
console.

Fix this by moving the delayed checking into the mode restore.

v2: Daniel suggested that ->delayed_hotplug is set under
the mode_config mutex, so we should check it under that as
well, while we are in the area.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

At least on two MST devices I've tested with, when
they are link training downstream, they are totally
unable to handle aux ch msgs, so they defer like nuts.
I tried 16, it wasn't enough, 32 seems better.

This fixes one Dell 4k monitor and one of the
MST hubs.

v1.1: fixup comment (Tom).
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge rockchip GPU support.

This has a branch in common with the iommu tree, hopefully the
process works.

* 'drm_iommu_v15' of https://github.com/markyzq/kernel-drm-rockchip:
  dt-bindings: video: Add documentation for rockchip vop
  dt-bindings: video: Add for rockchip display subsytem
  drm: rockchip: Add basic drm driver
  dt-bindings: iommu: Add documentation for rockchip iommu
  iommu/rockchip: rk3288 iommu driver

As discussed on irc, I'm sending a pull request with one important change:

- Disable support for 32-bit user processes. This is done due to AMD's decision
  to remove support for 32-bit user processes on Linux for its HSA stack.

* 'amdkfd-next-3.19' of git://people.freedesktop.org/~gabbayo/linux:
  amdkfd: Disable support for 32-bit user processes

Linux 3.18

Backmerge Linus tree into -next as we had conflicts in i915/radeon/nouveau,
and everyone was solving them individually.

* tag 'v3.18': (57 commits)
  Linux 3.18
  watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7
  uapi: fix to export linux/vm_sockets.h
  i2c: cadence: Set the hardware time-out register to maximum value
  i2c: davinci: generate STP always when NACK is received
  ahci: disable MSI on SAMSUNG 0xa800 SSD
  context_tracking: Restore previous state in schedule_user
  slab: fix nodeid bounds check for non-contiguous node IDs
  lib/genalloc.c: export devm_gen_pool_create() for modules
  mm: fix anon_vma_clone() error treatment
  mm: fix swapoff hang after page migration and fork
  fat: fix oops on corrupted vfat fs
  ipc/sem.c: fully initialize sem_array before making it visible
  drivers/input/evdev.c: don't kfree() a vmalloc address
  cxgb4: Fill in supported link mode for SFP modules
  xen-netfront: Remove BUGs on paged skb data which crosses a page boundary
  mm/vmpressure.c: fix race in vmpressure_work_fn()
  mm: frontswap: invalidate expired data on a dup-store failure
  mm: do not overwrite reserved pages counter at show_mem()
  drm/radeon: kernel panic in drm_calc_vbltimestamp_from_scanoutpos with 3.18.0-rc6
  ...

Conflicts:
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/nouveau/nouveau_drm.c
	drivers/gpu/drm/radeon/radeon_cs.c

Pull libata fixes from Tejun Heo:
 "Three libata fixes for v3.18.  Nothing too interesting.  PCI ID ID and
  quirk additions to ahci and an error handling path fix in sata_fsl"

* 'for-3.18-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ahci: disable MSI on SAMSUNG 0xa800 SSD
  sata_fsl: fix error handling of irq_of_parse_and_map
  AHCI: Add DeviceIDs for Sunrise Point-LP SATA controller

Pull watchdog fix from Wim Van Sebroeck:
 "Fix the watchdog mask bit offset for Exynos7"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: s3c2410_wdt: Fix the mask bit offset for Exynos7

Pull i2c fixes from Wolfram Sang:
 "Here are two more driver bugfixes for I2C which would be good to have"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: cadence: Set the hardware time-out register to maximum value
  i2c: davinci: generate STP always when NACK is received

This patch checks if the process that opens the /dev/kfd device is 32-bit
process. If so, it returns -EPERM and prints a warning message in dmesg.

This is done to prevent 32-bit user processes from using amdkfd, and hence, HSA
features.

AMD's HSA userspace stack will also support only 64-bit processes on Linux.
Reviewed-by: Alexey Skidanov <alexey.skidanov@amd.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

The watchdog mask bit offset listed for Exynos7 is incorrect.
Fix this.
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Naveen Krishna Chatradhi <naveenkrishna.ch@gmail.com
Reviewd-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Pull x86 fixes from Thomas Gleixner:
 "Two final fixlets for 3.18:
   - Prevent microcode reload wreckage on 32bit
   - Unbreak cross compilation"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: Limit the microcode reloading to 64-bit for now
  x86: Use $(OBJDUMP) instead of plain objdump

Pull sound fixlet from Takashi Iwai:
 "Just one commit for adding a copule of HD-audio quirk entries"

* tag 'sound-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Add headset Mic support for new Dell machine

Pull drm intel fixes from Dave Airlie:
 "Two intel stable fixes, that should be it from me for this round"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Unlock panel even when LVDS is disabled
  drm/i915: More cautious with pch fifo underruns

Pull ACPI backlight fix from Rafael Wysocki:
 "This is a simple fix for an ACPI backlight regression introduced by a
  recent commit that overlooked a corner case which should have been
  taken into account"

* tag 'pm+acpi-3.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / video: update condition to check if device is in _DOD list

Silence some pch fifo underrun reports and panel locking backtraces,
both cc: stable.

* tag 'drm-intel-fixes-2014-12-04' of git://anongit.freedesktop.org/drm-intel:
  drm/i915: Unlock panel even when LVDS is disabled
  drm/i915: More cautious with pch fifo underruns