- 07 Mar, 2011 39 commits
-
-
Xiaochen Wang authored
use kmemdup instead of kmalloc and memcpy, and check its return value Signed-off-by:
Xiaochen Wang <wangxiaochen0@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Xiaochen Wang authored
check kmalloc return value Signed-off-by:
-
Dowan Kim authored
The attempt to enter to suspend mode can be hindered when the network interface is disabled. When system enters the suspend mode with the network interface disabled, network layer calls ifdown() followed by cfg80211 layer calling wl_cfg80211_suspend() which is registered as suspend handler for cfg80211 layer. ifdown() call ultimately funnels down to __wl_cfg80211_down() call where WL_STATUS_READY bit is cleared via call to "clear_bit(WL_STATUS_READY, &wl->status)" But CHECK_SYS_UP()checks WL_STATUS_READY bit thinking it's not ready and returns -EIO from suspend handler which intern prevents entering into system suspend state CHECK_SYS_UP() is mainly used in the code path where upper layer would request certain wifi related activity to be performed by the firmware, where this calls helps to make sure our firmware would be in ready state to respond to those requests But in the case of wl_cfg80211_suspend() code path there is no need to check for firmware status for any reason Signed-off-by:
Dowan Kim <dowan@broadcom.com> Signed-off-by:
-
wwang authored
A greenhouse sd card can't be recognized using rts5209. To fix this bug, these modifications are applied: 1, Move some codes which clear sd internal variables from sd_init_type to sd_prepare_reset. So sd_init_type is useless any more and is removed entirely; 2, If a sd card can't pass sd3.0 mode, the action of tunning phase should be avoided when retrying sd2.0 mode. Signed-off-by:
wwang <wei_wang@realsil.com.cn> Signed-off-by:
-
Mark Allyn authored
Also remove associated functions, structures, and defines Signed-off-by:
Mark Allyn <mark.a.allyn@intel.com> Signed-off-by:
-
huajun li authored
The usb portion of this driver can now go into drivers/usb/storage. This leaves the non-usb portion of the code still in staging. Signed-off-by:
Huajun Li <huajun.li.lee@gmail.com> Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
Mike McCormack <mikem@ring3k.org> Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Phy functions shouldn't be associated with net_device. Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
This variable is not used by the ieee80211 library, so move it rtl8192e's private struct. Signed-off-by:
-
Mike McCormack authored
Move variables only accessed by the RTL ieee80211 library into its private struct. Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Mike McCormack authored
Signed-off-by:
-
Marek Belisko authored
This patch will fix following compilation error: drivers/staging/gma500/psb_drv.c:1635: error: unknown field ‘pci_driver’ specified in initializer drivers/staging/gma500/psb_drv.c:1636: error: unknown field ‘name’ specified in initializer drivers/staging/gma500/psb_drv.c:1636: warning: initialization from incompatible pointer type drivers/staging/gma500/psb_drv.c:1637: error: unknown field ‘id_table’ specified in initializer drivers/staging/gma500/psb_drv.c:1637: warning: excess elements in union initializer drivers/staging/gma500/psb_drv.c:1637: warning: (near initialization for ‘driver.kdriver’) drivers/staging/gma500/psb_drv.c:1638: error: unknown field ‘resume’ specified in initializer drivers/staging/gma500/psb_drv.c:1638: warning: excess elements in union initializer drivers/staging/gma500/psb_drv.c:1638: warning: (near initialization for ‘driver.kdriver’) drivers/staging/gma500/psb_drv.c:1639: error: unknown field ‘suspend’ specified in initializer drivers/staging/gma500/psb_drv.c:1639: warning: excess elements in union initializer drivers/staging/gma500/psb_drv.c:1639: warning: (near initialization for ‘driver.kdriver’) drivers/staging/gma500/psb_drv.c:1640: error: unknown field ‘probe’ specified in initializer drivers/staging/gma500/psb_drv.c:1640: warning: excess elements in union initializer drivers/staging/gma500/psb_drv.c:1640: warning: (near initialization for ‘driver.kdriver’) drivers/staging/gma500/psb_drv.c:1641: error: unknown field ‘remove’ specified in initializer drivers/staging/gma500/psb_drv.c:1641: warning: excess elements in union initializer drivers/staging/gma500/psb_drv.c:1641: warning: (near initialization for ‘driver.kdriver’) drivers/staging/gma500/psb_drv.c:1643: error: unknown field ‘driver’ specified in initializer drivers/staging/gma500/psb_drv.c:1643: warning: excess elements in union initializer drivers/staging/gma500/psb_drv.c:1643: warning: (near initialization for ‘driver.kdriver’) drivers/staging/gma500/psb_drv.c: In function ‘psb_init’: drivers/staging/gma500/psb_drv.c:1664: error: implicit declaration of function ‘drm_init’ drivers/staging/gma500/psb_drv.c: In function ‘psb_exit’: drivers/staging/gma500/psb_drv.c:1669: error: implicit declaration of function ‘drm_exit’ Signed-off-by:
Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Alan Cox authored
Remove all sorts of bits we can get rid of. We are now a very simple KMS driver relying on the stolen memory for our framebuffer base (which is for the moment hardcoded). To support multiple frame buffers and some accel bits we will need some kind of memory allocator, possibly a minimal use of GEM. Signed-off-by:
-
Jonathan Neuschäfer authored
Signed-off-by:
Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by:
Jack Stone <jwjstone@fastmail.fm> Signed-off-by:
-
Jonathan Neuschäfer authored
Signed-off-by:
-
Tomas Winkler authored
convert if (NULL != ptr) to if (ptr) convert if (NULL == ptr) to if (!ptr) Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
's/(false == \([^ ]\+\))/(!\1)/g' Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by: -
Tomas Winkler authored
's/(true == \([^ ]\+\))/(\1)/g' Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by:
-
Tomas Winkler authored
mostly indentation fixes and some line over 80 characters fixes Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by:
-
Aaro Koskinen authored
Drop the badly defined and broken private ioctl interface. Since the driver is in staging, and some of the ioctls are clearly unsafe or not even working, it's unlikely that there are any users. Signed-off-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
-
Thomas Viehweger authored
Unable to load the module lirc_parallel without the attached patch. Signed-off-by:
Thomas Viehweger <patchesThomas.Vie@web.de> Signed-off-by:
-
- 03 Mar, 2011 1 commit
-
-
Greg Kroah-Hartman authored
When the code moved around earlier, this function declaration should have been removed but it wasn't. Resolve that. Cc: Hank Janssen <hjanssen@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
-
