- 26 Jan, 2019 40 commits
-
-
wenxu authored
Refactor collect metatdata mode tunnel xmit to the generic xmit function ip_md_tunnel_xmit. It makes codes more generic and support more feture such as pmtu_update through ip_md_tunnel_xmit Signed-off-by:
wenxu <wenxu@ucloud.cn> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
wenxu authored
Init the gre_key from tuninfo->key.tun_id and init the mark from the skb->mark, set the oif to zero in the collect metadata mode. Fixes: cfc7381b ("ip_tunnel: add collect_md mode to IPIP tunnel") Signed-off-by:
-
wenxu authored
Add tnl_update_pmtu in ip_md_tunnel_xmit to dynamic modify the pmtu which packet send through collect_metadata mode ip tunnel Signed-off-by:
-
wenxu authored
Add ip tunnel dst cache in ip_md_tunnel_xmit to make more efficient for the route lookup. Signed-off-by:
-
Bryan Whitehead authored
The LAN743x includes on chip One-Time-Programmable (OTP) memory. This patch extends the ethtool EEPROM read/write interface to access OTP memory space. The currently existing interface is limited, as it does not allow OTP read, and OTP writes are restricted to offset==0, length==512, and data[0]==0xF3. This patch removes these restrictions and adds a private flag called OTP_ACCESS, which is used to switch between EEPROM, and OTP modes. The private flag OTP_ACCESS is configurable through the ethtool --set-priv-flags command. And visible through the ethtool --show-priv-flags command. By default OTP_ACCESS is false, and there for previously existing EEPROM commands will work exactly the same. However now access to OTP requires one extra step of setting OTP_ACCESS to true. This flag controls the read, write, and length reporting, functions of ethtool. EEPROM presence is not checked when setting or clearing this flag. If the EEPROM is not present, the user, as before, will need to diagnose that using existing read and write function of ethtool, while OTP_ACCESS is false. Updates for V2: Added comments as to why this patch is needed. Added comments explaining that EEPROM presence is not check when setting or clearing the OTP_ACCESS flag. Added length checking to all otp/eeprom read/write functions. Signed-off-by:
Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by:
-
David S. Miller authored
Huazhong Tan says: ==================== code optimizations & bugfixes for HNS3 driver This patchset includes bugfixes and code optimizations for the HNS3 ethernet controller driver ==================== Signed-off-by: -
Jian Shen authored
VF can receive packets of other functions when in promisc mode. It's not safe, so don't allow VF to enable promisc mode. Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by:
-
Jian Shen authored
This patch adds initialization for nic state, sets flag HNS3_NIC_STATE_DOWN when initialize, clears it before vectors and napi being enabled in the hns3_nic_net_up(), and sets it back in the error handler. Signed-off-by:
-
Peng Li authored
A single transmit packet can span up to 8 descriptors according to the HW limit. If a skb has more than 8 frags, driver uses skb_copy to get a new skb which has less frags. Signed-off-by:
Peng Li <lipeng321@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
hns3_client_setup_tc in enet is for updating TC configuration to stack, and hclge_setup_tc in hclge_dcb is mainly for setting the configuration to hardware. This patch removes the hns3_nic_set_real_num_queue from hns3_setup_tc in enet, and call hclge_client_setup_tc to update TC configuration to stack with netdev down, because the netdev down operation is done in hclge_dcb now. Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
-
Yunsheng Lin authored
After doing down/uninit/init/up in hclge_dcb, it is not necessary to call dcb_ops->map_update in enet, so hclge_map_update can be called directly in hclge_dcb. This is for preparing to call hns3_nic_set_real_num_queue with netdev down when user changes mqprio configuration. Signed-off-by:
-
Yunsheng Lin authored
When user changes the mqprio configuration, enet need to be uninited and inited besides down'ed and up'ed, because the queue num may change when the TC num changes. Also, it is more suitable to do the down/unint/init/up operation in hclge module using hclge_notify_client, because this config change may affect PF and its VF. Signed-off-by:
-
liuzhongzhu authored
After setting the serdes loopback, you need to determine the status of the MAC negotiation. If a status exception is obtained after 200ms, a timeout error is returned. Signed-off-by:
liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by:
-
Jian Shen authored
For revision 0x20, vlan filter is always bypassed when enable broadcast promisc mode. In this case, broadcast packets with any vlan id can be accpeted. We should disable broadcast promisc mode until user want enable it. Fixes: 46a3df9f ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by:
-
Jian Shen authored
In current code, it always return 0, even loopback mode setting failed. It's incorrect. This patch fixes return value handle for loopback test. Fixes: 0f29fc23 ("net: hns3: Fix for loopback selftest failed problem") Signed-off-by:
-
Yunsheng Lin authored
Currently hclge_ieee_setets returns error directly when there is error, which may cause netdev not up problem. This patch adds some error handling when setting ETS configuration fails. Fixes: cacde272 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by:
-
Jian Shen authored
When unload hns3 driver, we should clear the pci private data. Signed-off-by:
-
Jian Shen authored
Packet statistics for netdev should not include the packets dropped by hardware. Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: add EEE support for RTL8168f This series adds EEE support for RTL8168f. Again first patch adds the support, and second patch enables EEE per default. ==================== Signed-off-by: -
Heiner Kallweit authored
Enable EEE per default on RTL8168f. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
Add EEE support for RTL8168f to the recently added EEE handling framework in the driver. This patch leaves the chip defaults, means EEE typically is disabled initially and it's up to the user to enable it via ethtool. Signed-off-by:
-
Heiner Kallweit authored
Switch phylib documentation to rst format. Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Willem de Bruijn authored
Accept MSG_ZEROCOPY in all the TCP states that allow sendmsg. Remove the explicit check for ESTABLISHED and CLOSE_WAIT states. This requires correctly handling zerocopy state (uarg, sk_zckey) in all paths reachable from other TCP states. Such as the EPIPE case in sk_stream_wait_connect, which a sendmsg() in incorrect state will now hit. Most paths are already safe. Only extension needed is for TCP Fastopen active open. This can build an skb with data in tcp_send_syn_data. Pass the uarg along with other fastopen state, so that this skb also generates a zerocopy notification on release. Tested with active and passive tcp fastopen packetdrill scripts at https://github.com/wdebruij/packetdrill/commit/1747eef03d25a2404e8132817d0f1244fd6f129dSigned-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
YueHaibing authored
Use DEFINE_DEBUGFS_ATTRIBUTE rather than DEFINE_SIMPLE_ATTRIBUTE for debugfs files. Semantic patch information: Rationale: DEFINE_SIMPLE_ATTRIBUTE + debugfs_create_file() imposes some significant overhead as compared to DEFINE_DEBUGFS_ATTRIBUTE + debugfs_create_file_unsafe(). Generated by: scripts/coccinelle/api/debugfs/debugfs_simple_attr.cocci Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Yangbo Lu <yangbo.lu@nxp.com> Signed-off-by:
-
David S. Miller authored
Heiner Kallweit says: ==================== r8169: add EEE support for RTL8168g+ This series adds general EEE support to be used with ethtool. In addition it implements EEE for chip versions from RTL8168g. The first patch leaves the default chip settings and the second enables EEE per default. This allows us to revert patch 2 w/o removing EEE support completely if we should face issues with EEE on particular chip versions. Unfortunately Realtek decided not to use the standard EEE MMD registers but to use proprietary registers. Therefore we can't use phylib functions like phy_ethtool_set_eee and have to reimplement the functionality. Tested on a system with RTL8168g (chip version 40). ==================== Signed-off-by: -
Heiner Kallweit authored
Enable EEE per default on chip versions from RTL8168g. Signed-off-by:
-
Heiner Kallweit authored
This patch adds the general framework to deal with EEE in this driver plus EEE support for chip versions from RTL8168g. We don't touch the default chip settings, therefore EEE will usually be disabled and it's up to the user to enable it. Signed-off-by:
-
David S. Miller authored
Peter Oskolkov says: ==================== net: IP defrag: use rbtrees in IPv6 defragmentation Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implementations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patchset contains four patches: - patch 1 moves rbtree-related code from IPv4 to files shared b/w IPv4/IPv6 - patch 2 changes IPv6 defragmenation code to use rbtrees for defrag queue - patch 3 changes nf_conntrack IPv6 defragmentation code to use rbtrees - patch 4 changes ip_defrag selftest to test changes made in the previous three patches. Along the way, the 1280-byte restrictions are removed. I plan to introduce similar changes to 6lowpan defragmentation code once I figure out how to test it. ==================== Reviewed-by:
-
Peter Oskolkov authored
This patch adds several changes to the ip_defrag selftest, to cover new IPv6 defrag behavior: - min IPv6 frag size is now 8 instead of 1280 - new test cases to cover IPv6 defragmentation in nf_conntrack_reasm.c - new "permissive" mode in negative (overlap) tests: netfilter sometimes drops invalid packets without passing them to IPv6 underneath, and thus defragmentation sometimes succeeds when it is expected to fail; so the permissive mode does not fail the test if the correct reassembled datagram is received instead of a timeout. Signed-off-by:
Peter Oskolkov <posk@google.com> Signed-off-by:
-
Peter Oskolkov authored
Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implemenations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patch re-uses common IP defragmentation queueing and reassembly code in IP6 defragmentation in nf_conntrack, removing the 1280 byte restriction. Signed-off-by:
Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by:
-
Peter Oskolkov authored
Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implemenations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patch re-uses common IP defragmentation queueing and reassembly code in IPv6, removing the 1280 byte restriction. Signed-off-by:
-
Peter Oskolkov authored
This is a refactoring patch: without changing runtime behavior, it moves rbtree-related code from IPv4-specific files/functions into .h/.c defrag files shared with IPv6 defragmentation code. Signed-off-by:
-
David S. Miller authored
Julian Wiedmann says: ==================== s390/qeth: updates 2019-01-25 please apply a first batch of qeth patches for net-next, primarily touching the net_device parts of the driver. In addition to the usual refactoring & code consolidation, patch 7 makes use of netif_device_detach() to let the stack know when our control plane is down. This helps quite a bit wrt to overall locking and proper init/shutdown sequencing. ==================== Signed-off-by: -
Julian Wiedmann authored
For recovery purposes, qeth keeps track of all registered VIDs. Replace this by using the infrastructure introduced in commit 9daae9bd ("net: Call add/kill vid ndo on vlan filter feature toggling"). By managing NETIF_F_HW_VLAN_CTAG_FILTER as a hw_feature, netdev_update_features() will select it from dev->wanted_features and replay all of the netdevice's VIDs to its ndo_vlan_rx_add_vid() callback. z/VM NICs strictly require VLAN registration, so don't expose it as hw_feature there but add a little hack in qeth_enable_hw_features() to make things work regardless. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
When a qeth card is offline, it has no connection to the HW. So none of our control callbacks can run IO against it, and we can only cache the input (eg a new MAC address) without providing proper feedback to the caller. In this context, it seems much more reasonable to simply detach the netdevice and let the kernel reject any interaction with it. This also makes all sorts of internal state checks and locking obsolete. Signed-off-by:
-
Julian Wiedmann authored
Re-order the code flow a bit so that all initial HW setup is done before putting the netdevice into play. For a netdevice that hasn't been registered before, we also don't need to re-enable its HW features or check for recovery actions. Signed-off-by:
-
Julian Wiedmann authored
At best this is redundant, at worst it papers over a race in the offline / online code. Signed-off-by:
-
Julian Wiedmann authored
commit 4789a218 ("s390/qeth: fix race when setting MAC address") resolved a race where our initial programming of dev_addr into the HW and a call to ndo_set_mac_address() could run concurrently. In this case, we could end up getting confused about which address was actually set in the HW. The quick fix was to introduce additional locking that blocks any ndo_set_mac_address() while the device is being set online. But the race primarily originated from the fact that we first register the netdevice, and only then program its dev_addr. By re-ordering this sequence, userspace will only be able to change the MAC address _after_ we have finished with setting the initial dev_addr. Still, the same MAC address race can also occur during a subsequent call to qeth_l2_set_online(). So keep around the locking for now, until a follow-up patch fully resolves this. Signed-off-by:
-
Julian Wiedmann authored
The L2 and L3 code for these ops is almost identical, we only need to provide a custom ndo_validate_addr() for L2 that checks whether programming the MAC address succeeded. Signed-off-by:
-
Julian Wiedmann authored
qeth_qdio_cq_handler() doesn't replenish the Output Queue(s), and thus has no reason to wake the txq. Signed-off-by:
-
