- 16 Jan, 2019 31 commits
-
-
Fabrizio Castro authored
Add the compatible string for RZ/G2E (a.k.a. R8A774C0) to the list of supported SoCs. Signed-off-by:
Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Niklas Söderlund authored
The driver fixed the TXA CSI-2 transmitter in 4-lane mode while it could operate using 1-, 2- and 4-lanes. Update the driver to support all available modes. The driver makes use of large tables of static register/value writes when powering up/down the TXA and TXB transmitters which include the write to the NUM_LANES register. By converting the tables into functions and using parameters the power up/down functions for TXA and TXB power up/down can be merged and used for both transmitters. Signed-off-by:
Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by:
-
Niklas Söderlund authored
The adv748x CSI-2 transmitters TXA and TXB can use different number of lanes to transmit data. In order to be able to configure the device correctly this information need to be parsed from device tree and stored in each TX private data structure. TXA supports 1, 2 and 4 lanes while TXB supports 1 lane. Signed-off-by:
-
Niklas Söderlund authored
Extend the MIPI CSI-2 power up sequence to match the power up sequence in the hardware manual chapter "9.5.1 Power Up Sequence". This change allows the power up functions to be reused when initializing the hardware reducing code duplicating as well aligning with the documentation. Signed-off-by:
-
Niklas Söderlund authored
The CSI-2 transmitters can use a different number of lanes to transmit data. Make the data-lanes mandatory for the endpoints that describe the transmitters as no good default can be set to fallback on. Signed-off-by:
-
Aditya Pakki authored
In sp8870_set_frontend_parameters, the function sp8870_readreg may return an error when i2c_transfer fails. The fix checks for this error and returns upstream consistent with other invocations. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Aditya Pakki authored
Write16 can return an error code -1 when the i2c_write fails. The fix checks for these failures and returns the error upstream Signed-off-by:
-
Ettore Chimenti authored
The actual value of the RC5 System Number (address) is stored in the IR_READ_DATA common register masked with 0x1F00 so it have to be shifted by 8 bits. Signed-off-by:
Ettore Chimenti <ek5.chimenti@gmail.com> Signed-off-by:
-
Colin Ian King authored
There are two return paths that do not kfree dvb_spi. Fix the memory leaks by returning via the exit label fail_adapter that will free dvi_spi. Detected by CoverityScan, CID#1475991 ("Resource Leak") Fixes: cb496cd4 ("media: cxd2880-spi: Add optional vcc regulator") Signed-off-by:Colin Ian King <colin.king@canonical.com> Acked-by: Yasunari Takiguchi <Yasunari.Takiguchi@sony.com>? Signed-off-by:
-
Kangjie Lu authored
mt312_reset() may fail. Although it is called in the end of mt312_set_frontend(), we better check its status and return its error code upstream instead of 0. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Reviewed-by:
Matthias Schwarzott <zzam@gentoo.org> Signed-off-by:
-
Kangjie Lu authored
If lgdt3306a_read_reg() fails, the read data in "val" is incorrect, thus shouldn't be further used. The fix inserts a check for the return value of lgdt3306a_read_reg(). If it fails, goto fail. Signed-off-by:
-
Arnd Bergmann authored
All other drivers that need RC_CORE have a dependency rather than using 'select', so we should do the same here to avoid circular dependencies as well as this warning about missing dependencies: WARNING: unmet direct dependencies detected for RC_CORE Depends on [n]: INPUT [=n] Selected by [y]: - VIDEO_SECO_RC [=y] && MEDIA_SUPPORT [=y] && CEC_PLATFORM_DRIVERS [=y] && VIDEO_SECO_CEC [=y] Fixes: daef9576 ("media: seco-cec: add Consumer-IR support") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Niklas Söderlund authored
The locking implemented in the async notifier callbacks are unnecessary as the global list_lock in v4l2-async.c is held whenever one of the callbacks are called. The locking in itself is not harmful however it produces a LOCKDEP warning between the global v4l2-async list_lock and the rcar-vin local locking schema. Remove the rcar-vin locking for the async callbacks to reduce complexity and silent the false LOCKDEP warning. Signed-off-by:
-
Akinobu Mita authored
Now the equivalent of FRACT_CMP() is added in v4l2 common internal API header. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by:
-
Alexey Khoroshilov authored
tw9910 driver tries to sleep for the same period of time after each gpiod_set_value(). The patch moves duplicated code to a helper function. Signed-off-by:
Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by:
-
Alexey Khoroshilov authored
If gpiod_get_optional() fails in tw9910_power_on(), clk is left undisabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
-
Pawe? Chmiel authored
Previously when doing format enumeration, it was returning all formats supported by driver, even if they're not supported by hw. Add missing check for fmt_ver_flag, so it'll be fixed and only those supported by hw will be returned. Similar thing is already done in s5p_jpeg_find_format. It was found by using v4l2-compliance tool and checking result of VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS test and using v4l2-ctl to get list of all supported formats. Tested on s5pv210-galaxys (Samsung i9000 phone). Fixes: bb677f3a ("[media] Exynos4 JPEG codec v4l2 driver") Signed-off-by:
Pawe? Chmiel <pawel.mikolaj.chmiel@gmail.com> Reviewed-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> [hverkuil-cisco@xs4all.nl: fix a few alignment issues] Signed-off-by:
-
Aditya Pakki authored
In mt9m111_probe, m5602_write_bridge can timeout and return a negative error value. The fix checks for this error and passes it upstream. Signed-off-by:
-
Aditya Pakki authored
In po1030_probe(), m5602_write_bridge() can timeout and return an error value. The fix checks for the return value and propagates upstream consistent with other usb drivers. Signed-off-by:
-
Kangjie Lu authored
The fix checks if goto_low_power() fails, and if so, issues an error message. Signed-off-by:
-
Kangjie Lu authored
do_command() may fail. The fix adds the missed return value of do_command(). If it fails, returns its error code. Signed-off-by:
-
Ondrej Jirman authored
When cedrus_hw_probe is called, v4l2_dev is not yet initialized. Use dev_err instead. Signed-off-by:
Ondrej Jirman <megous@megous.com> Acked-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Hans Verkuil authored
Control events can leak kernel memory since they do not fully zero the event. The same code is present in both v4l2-ctrls.c and uvc_ctrl.c, so fix both. It appears that all other event code is properly zeroing the structure, it's these two places. Signed-off-by:
-
Dafna Hirschfeld authored
In the fwht_encode_frame, 'encoding = encode_plane' should be replaced with 'encoding |= encode_plane' so existing flags won't be overwrriten. Signed-off-by:
Dafna Hirschfeld <dafna3@gmail.com> Signed-off-by:
-
Andrzej Pietrasiewicz authored
My @samsung.com address is going to cease existing soon, so change it to an address which can actually be used to contact me. Adding Sylwester Nawrocki, who still has access to a wide spectrum of Exynos-based hardware. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
-
Andrzej Pietrasiewicz authored
My @samsung.com address is going to cease existing soon, so change it to an address which can actually be used to contact me. Signed-off-by:
-
Jacopo Mondi authored
The PHTW selection algorithm implemented in rcsi2_phtw_write_mbps() checks for lower bound of the interval used to match the desired bandwidth. Use that in place of the currently used upper bound. Fixes: 10c08812 ("media: rcar: rcar-csi2: Update V3M/E3 PHTW tables") Signed-off-by:
-
Kieran Bingham authored
In the partition sizing the term 'prevents' is inappropriately pluralized. Simplify to 'prevent'. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
-
Hans Verkuil authored
Added include/trace/events/pwc.h to the list of files. Signed-off-by:
-
Matwey V. Kornilov authored
DMA cocherency slows the transfer down on systems without hardware coherent DMA. Instead we use noncocherent DMA memory and explicit sync at data receive handler. Based on previous commit the following performance benchmarks have been carried out. Average memcpy() data transfer rate (rate) and handler completion time (time) have been measured when running video stream at 640x480 resolution at 10fps. x86_64 based system (Intel Core i5-3470). This platform has hardware coherent DMA support and proposed change doesn't make big difference here. * kmalloc: rate = (2.0 +- 0.4) GBps time = (5.0 +- 3.0) usec * usb_alloc_coherent: rate = (3.4 +- 1.2) GBps time = (3.5 +- 3.0) usec We see that the measurements agree within error ranges in this case. So theoretically predicted performance downgrade cannot be reliably measured here. armv7l based system (TI AM335x BeagleBone Black @ 300MHz). This platform has no hardware coherent DMA support. DMA coherence is implemented via disabled page caching that slows down memcpy() due to memory controller behaviour. * kmalloc: rate = ( 94 +- 4) MBps time = (101 +- 4) usec * usb_alloc_coherent: rate = (28.1 +- 0.1) MBps time = (341 +- 2) usec Note, that quantative difference leads (this commit leads to 3.3 times acceleration) to qualitative behavior change in this case. As it was stated before, the video stream cannot be successfully received at AM335x platforms with MUSB based USB host controller due to performance issues [1]. [1] https://www.spinics.net/lists/linux-usb/msg165735.htmlSigned-off-by:Matwey V. Kornilov <matwey@sai.msu.ru> Reviewed-by:
-
Matwey V. Kornilov authored
There were reports that PWC-based webcams don't work at some embedded ARM platforms. [1] Isochronous transfer handler seems to work too long leading to the issues in MUSB USB host subsystem. Also note, that urb->giveback() handlers are still called with disabled interrupts. In order to be able to measure performance of PWC driver, traces are introduced in URB handler section. [1] https://www.spinics.net/lists/linux-usb/msg165735.htmlSigned-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by:
-
- 07 Jan, 2019 9 commits
-
-
Marek Szyprowski authored
Virtual MFC codec's child devices must not be assigned to platform bus, because they are allocated as raw 'struct device' and don't have the corresponding 'platform' part. This fixes NULL pointer access revealed recently by commit a66d9724 ("devres: Align data[] to ARCH_KMALLOC_MINALIGN"). Fixes: c79667dd ("media: s5p-mfc: replace custom reserved memory handling code with generic one") Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
-
Wei Yongjun authored
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Fixes: d2b4387f ("media: platform: Add Aspeed Video Engine driver") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
-
Sakari Ailus authored
The driver documentation is under GPL v2 and the uAPI documentation under GNU FDL 1.1+ (without invariant sections) or GPL v2. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Sakari Ailus authored
The intel-ipu3.h intended-to-be-uAPI header is currently under drivers/staging/media/ipu3/include/, not include/uapi/linux. Signed-off-by:
-
French, Nicholas A authored
A typo in code cleanup commit db9c1007 ("media: lgdt330x: do some cleanups at status logic") broke the FE_HAS_LOCK reporting for 3303 chips by inadvertently modifying the register mask. The broken lock status is critial as it prevents video capture cards from reporting signal strength, scanning for channels, and capturing video. Fix regression by reverting mask change. Cc: stable@vger.kernel.org # Kernel 4.17+ Fixes: db9c1007 ("media: lgdt330x: do some cleanups at status logic") Signed-off-by:
Nick French <naf@ou.edu> Reviewed-by:
Adam Stylinski <kungfujesus06@gmail.com> Signed-off-by:
-
Hans Verkuil authored
The layout of the compound controls has changed to fix 32/64 bit alignment issues and the use of timestamps instead of buffer indices to refer to buffers. Signed-off-by:
-
Hans Verkuil authored
Use the new v4l2_m2m_buf_copy_data helper function and use timestamps to refer to reference frames instead of using buffer indices. Also remove the padding fields in the structs, that's a bad idea. Just use the right types to keep everything aligned. Signed-off-by:
-
Hans Verkuil authored
Use v4l2_timeval_to_ns instead of timeval_to_ns to ensure that both kernelspace and userspace will use the same conversion function. Next add a new vb2_find_timestamp() function to find buffers with a specific timestamp. This function will only look at DEQUEUED and DONE buffers, i.e. buffers that are already processed. Signed-off-by:
-
Hans Verkuil authored
We want to be able to uniquely identify buffers for stateless codecs. The internal timestamp (a u64) as stored internally in the kernel is a suitable candidate for that, but in struct v4l2_buffer it is represented as a struct timeval. Add a v4l2_timeval_to_ns() function that converts the struct timeval into a u64 in the same way that the kernel does. This makes it possible to use this u64 elsewhere as a unique identifier of the buffer. Since timestamps are also copied from the output buffer to the corresponding capture buffer(s) by M2M devices, the u64 can be used to refer to both output and capture buffers. The plan is that in the future we redesign struct v4l2_buffer and use u64 for the timestamp instead of a struct timeval (which has lots of problems with 32 vs 64 bit and y2038 layout changes), and then there is no more need to use this function. Signed-off-by:
-
