- 05 Feb, 2008 40 commits
-
-
Jeff Dike authored
Tweak the UML defconfig - we probably don't need 256 old-style ptys - this slows down udev noticably enable hostfs disable slab debugging - another noticable performance hit Signed-off-by:Jeff Dike <jdike@linux.intel.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Daniel Walker authored
The port_sem is already used as a mutex since it's using DECLARE_MUTEX(), but the underlying construct is still a semaphore .. This patch switches it over to a struct mutex. Signed-off-by:
Daniel Walker <dwalker@mvista.com> Signed-off-by:
-
Daniel Walker authored
The plug_mem_mutex is already used as a mutex since it's using DECLARE_MUTEX(), but the underlying construct is still a semaphore .. This patch switches it over to a struct mutex. Signed-off-by:
-
Daniel Walker authored
The ldt.semaphore conforms to the new struct mutex requirments, so I converted it to use the new API and changed the name. Signed-off-by:
-
Jeff Dike authored
Downgrade one of the MAC validity checks. If it's one that could be possibly assigned to a physical NIC, then nothing will break. So, emit a warning in this case, but keep the requested MAC. Signed-off-by:
-
Karol Swietlicki authored
This patch takes care of a problem with the stopping code. The function inside the while condition returns 0 to signify a problem. A problem could be for example a bad command or a bad version of the mconsole client. A bad command would terminate the stopping loop and resume the kernel. This is a problem. A better solution is to make the loop infinite and don't leave it until we are explicitly told to. Signed-off-by:
Karol Swietlicki <magotari@gmail.com> Signed-off-by:
-
Jeff Dike authored
John Reiser noticed that a physical memory region was being mapped twice. This patch fixes that, and it inlines the responsible function, as that had only one caller. Cc: John Reiser <jreiser@BitWagon.com> Signed-off-by:
-
WANG Cong authored
TOPDIR is obsolete, use srctree instead. This patch removes TOPDIR from all UML Makefiles. Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by:
-
Jeff Dike authored
The 3-level page table fixes forgot to remove a couple now-unused fields from struct mm_context. Signed-off-by:
-
Jeff Dike authored
Calling init_registers inside the skas3 checking causes mysterious crashes if it doesn't happen because the skas3 checking is bypassed. This patch moves it to os_early_checks. Signed-off-by:
-
Jeff Dike authored
Some printks were missing newlines. Signed-off-by:
-
Jeff Dike authored
Style fixes in arch/um/sys-x86_64: updated copyrights CodingStyle fixes added severities to printks which needed them A bunch of functions in sys-*/ptrace_user.c turn out to be unused, so they and their declarations are gone. Signed-off-by:
-
Jeff Dike authored
avoid-overflows-in-kernel-timec.patch makes CONFIG_HZ necessary for a successful build. UML lacks a definition, so this patch adds one. It also changes the hard-wired definition of HZ to CONFIG_HZ. Note: this patch is a good idea even in the absence of hpa's time fixes. Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
-
Jeff Dike authored
A couple more DEBUG_SHIRQ fixes. The previous mconsole blocking fix exposed the lack of O_NONBLOCK on the mconsole socket. Also, winch_interrupt started crashing because it is called at irq free time and it tries to dereference tty->driver_data, which has already been set to NULL. I added some error cleanup in mconsole_init while I was there. Cc: "Karol Swietlicki" <magotari@gmail.com> Signed-off-by:
-
Jeff Dike authored
The fakehd switch lost its implementation at some point. Since no one is screaming for it, we might as well remove it. Signed-off-by:
-
Jeff Dike authored
The .a flags in openflags never had an implementation. Signed-off-by:
-
Jeff Dike authored
Add some more commentary about various pieces of global data not needing locking. Also got rid of unmap_physmem since that is no longer used. Signed-off-by:
-
Jeff Dike authored
init_irq_signals doesn't need to be called from the context of a new process. It initializes handlers, which are useless in process context. With that call gone, init_irq_signals has only one caller, so it can be inlined into init_new_thread_signals. Signed-off-by:
-
Jeff Dike authored
This patch tidies the signal handling code slightly. pending is renamed to signals_pending for symmetry with signals_enabled. remove_sigstack was unused, so can be deleted. The value of change_sig was never used, so it is now void and the return value is not calculated any more. Signed-off-by:
-
Dominique Quatravaux authored
To convert from tv_nsec to tv_usec, one needs to divide by 1000, not multiply. Signed-off-by:
Dominique Quatravaux <dominique@quatravaux.org> Signed-off-by:
-
Jeff Dike authored
Joe Perches noticed some printks in smp.c that needed fixing. While I was in there, I did the usual tidying in arch/um/kernel, which should be fairly style-clean at this point: copyright updates emacs formatting comments removal include tidying style fixes Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Jeff Dike authored
sig_handler_common_skas needs significant modernization, starting with its name and storage class. There is no need to hide the true type of the sigcontext pointer, so the void * dummy parameter can be replaced with a sigcontext *sc. The array of uml_pt_regs structs used in the page fault case are gone, replaced by a local variable. This is also used in the non-segfault case instead of the copy in the task_struct. Since it's local, the special handling of the is_user flag can go away. There hasn't been any special treatment of SIGUSR1 in ages, so the line that enables it can be deleted. The special treatment of SIGSEGV similarly goes away, but to compensate, SA_NODEFER is added to sa_mask when registering a signal handler. Signed-off-by:
-
Jeff Dike authored
This patch moves sig_handler_common_skas from arch/um/os-Linux/skas/trap.c to its only caller in arch/um/os-Linux/signal.c. trap.c is now empty, so it can be removed. This is code movement only - the significant cleanup needed here is done in the next patch. Signed-off-by:
-
Jeff Dike authored
Kill a process that tries to branch into a stub and execute a system call. There are no security implications here - a system call in a stub is treated the same as a system call anywhere else. But if a process is trying to branch into a stub, either it is trying something nasty or it has gone haywire, so it's a good idea to get rid of it in either case. Signed-off-by:
-
Jeff Dike authored
Get rid of some syscall counters which haven't been useful in ages. Signed-off-by:
-
Jeff Dike authored
A bit of defensive programming - during development, it ocassionally happens that a call to init_new_context is missed, resulting in context holding a host pid of zero. When that address space is torn down, destroy_context does a kill(0), which instantly kills the whole UML without any errors whatsoever. This patch add a check for pids less than 2, to also catch 1 and negative pids. Signed-off-by:
-
Jeff Dike authored
Style fixes to arch/um/os/helper.c and tidying up the breakpoint fix a bit. helper.c gets all the usual style fixes - updated copyright all printks get severities Also - errval changes to err in helper_child fixed an obsolete comment run_helper was killing a child process which is guaranteed to be dead or dying anyway Removed the nohang and pname arguments from helper_wait and fixed the declaration and callers. nohang was used only in the slirp driver and I don't think it was needed. I think pname was a bit of overkill in putting out an error message when something goes wrong. Signed-off-by:
-
Jeff Dike authored
signals_enabled and pending have requirements on the order in which they are modified. This used to be done by declaring them volatile and putting an mb() where the ordering requirements were in effect. After getting a better (I hope) understanding of how to do this correctly, the volatile declarations are gone and the mb()'s replaced by barrier()'s. One of the mb()'s was deleted because I see no problematic writes that could be re-ordered past that point. Signed-off-by:
-
Jeff Dike authored
It turns out that if there's a panic early enough, UML will just sit there in the LED-blinking loop because the panic notifier hadn't been installed yet. This patch installs it earlier. It also fixes the problem which exposed the hang, namely that if you give UML a zero-sized initrd, it will ask alloc_bootmem for zero bytes, and that will cause the panic. While I was in initrd.c, I gave it a style makeover. Prompted by checkpatch, I moved a couple extern declarations of uml_exitcode to kern_util.h. Signed-off-by:
-
Jeff Dike authored
setjmp_wrapper existed to provide setjmp to kernel code when UML used libc's setjmp and longjmp. Now that UML has its own implementation, this isn't needed and kernel code can invoke setjmp directly. do_buffer_op is massively cleaned up since it is no longer a callback from setjmp_wrapper and given a va_list from which it must extract its arguments. The actual setjmp is moved from buffer_op to do_op_one_page because the copy operation is inside an atomic section (kmap_atomic to kunmap_atomic) and it shouldn't be longjmp-ed out of. Signed-off-by:
-
Jeff Dike authored
Customize the hooks in tlb.h to optimize TLB flushing some more. Add start and end fields to tlb_gather_mmu, which are used to limit the address space range scanned when a region is unmapped. The interfaces which just free page tables, without actually changing mappings, don't need to cause a TLB flush. Signed-off-by:
-
Jeff Dike authored
Some 64-bit tlb fixes - moved pmd_page_vaddr to pgtable.h since it's the same for both 2-level and 3-level page tables fixed a bogus cast on pud_page_vaddr made the address checking in update_*_range more careful Signed-off-by:
-
Jeff Dike authored
arch/um/os-Linux/file.c needed some style work - updated the copyright cleaned up the includes CodingStyle fixes added some missing CATCH_EINTRs os_set_owner was unused, so it is gone all printks now have severities fcntl(F_GETFL) was being called without checking the return removed an obsolete comment Signed-off-by:
-
Jeff Dike authored
Code tidying - the pid field of struct irq_fd isn't used, so it is removed os_set_fd_async needed to read flags before changing them, it doesn't need a pid passed in because it can call getpid itself, and a block of unused code needed deleting os_get_exec_close was unused, so it is removed ptrace_child called _exit for historical reasons which are no longer valid, so just calls exit instead Signed-off-by: -
Karol Swietlicki authored
Bring back the functionality of stopping user mode linux with the help of mconsole. [jdike - the bug being fixed is that the mconsole file descriptor is already set O_NONBLOCK or not, depending on whether we want no blocking (the normal case) or we want blocking (when an mconsole stop is in effect), so the MSG_DONTWAIT is redundant in the normal case, and wrong when we want to block.] Signed-off-by:
-
Karol Swietlicki authored
Fix the repetition of the NET symbol. It was once in UML specific options and once in networking. I removed the first occurrence, as it makes more sense to me to keep it only in networking. It also removes a mostly empty file which is not used anymore and some unused variables. Signed-off-by:
-
Jeff Dike authored
Style fixes in arch/um/os-Linux/irq.c and arch/um/os-Linux/sigio.c: Updated copyrights trimmed includes added severity indicators to printks CodingStyle fixes turned an bunch of panics into printks call some libc functions directly instead of going through the os_* wrappers Signed-off-by:
-
Jeff Dike authored
UML still needed some work in order to allow CFLAGS to be passed in from the command line. USER_CFLAGS is produced from KBUILD_CFLAGS in part by removing all the -I switches. This is so that kernel headers don't accidentally get pulled into libc files. However, a common use of command-line CFLAGS would be to add -I switches to the build. This patch specifically adds any command-line -I flags back to USER_CFLAGS. I also corrected the spelling of LFLAGS to LDFLAGS. Signed-off-by:
-
Jeff Dike authored
Give the stubs a VMA. This allows the removal of a truly nasty kludge to make sure that mm->nr_ptes was correct in exit_mmap. The underlying problem was always that the stubs, which have ptes, and thus allocated a page table, weren't covered by a VMA. This patch fixes that by using install_special_mapping in arch_dup_mmap and activate_context to create the VMA. The stubs have to be moved, since shift_arg_pages seems to assume that the stack is the only VMA present at that point during exec, and uses vma_adjust to fiddle its VMA. However, that extends the stub VMA by the amount removed from the stack VMA. To avoid this problem, the stubs were moved to a different fixed location at the start of the address space. The init_stub_pte calls were moved from init_new_context to arch_dup_mmap because I was occasionally seeing arch_dup_mmap not being called, causing exit_mmap to die. Rather than figure out what was really happening, I decided it was cleaner to just move the calls so that there's no doubt that both the pte and VMA creation happen, no matter what. arch_exit_mmap is used to clear the stub ptes at exit time. The STUB_* constants in as-layout.h no longer depend on UM_TASK_SIZE, that that definition is removed, along with the comments complaining about gcc. Because the stubs are no longer at the top of the address space, some care is needed while flushing TLBs. update_pte_range checks for addresses in the stub range and skips them. flush_thread now issues two unmaps, one for the range before STUB_START and one for the range after STUB_END. Signed-off-by:
-
Jeff Dike authored
Clean up the calculation and use of the usable address space size on the host. task_size is gone, replaced with TASK_SIZE, which is calculated from CONFIG_TOP_ADDR. get_kmem_end and set_task_sizes_skas are also gone. host_task_size, which refers to the entire address space usable by the UML kernel and which may be larger than the address space usable by a UML process, since that has to end on a pgdir boundary, is replaced by CONFIG_TOP_ADDR. STACK_TOP is now TASK_SIZE minus the two stub pages. Signed-off-by:
-
