For a merge dir that was copied up before v4.12 or that was hand crafted
offline (e.g. mkdir {upper/lower}/dir), upper dir does not contain the
'trusted.overlay.origin' xattr.  In that case, stat(2) on the merge dir
returns the lower dir st_ino, but getdents(2) returns the upper dir d_ino.

After this change, on merge dir lookup, missing origin xattr on upper
dir will be fixed and 'impure' xattr will be fixed on parent of the legacy
merge dir.
Suggested-by: zhangyi (F) <yi.zhang@huawei.com>
Reviewed-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

The optimization in ovl_cache_get_impure() that tries to remove an
unneeded "impure" xattr needs to take mnt_want_write() on upper fs.

Fixes: 4edb83bb ("ovl: constant d_ino for non-merge dirs")
Cc: <stable@vger.kernel.org> #v4.14
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

There are several write operations on upper fs not covered by
mnt_want_write():

- test set/remove OPAQUE xattr
- test create O_TMPFILE
- set ORIGIN xattr in ovl_verify_origin()
- cleanup of index entries in ovl_indexdir_cleanup()

Some of these go way back, but this patch only applies over the
v4.14 re-factoring of ovl_fill_super().

Cc: <stable@vger.kernel.org> #v4.14
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

The functions ovl_lower_positive() and ovl_check_empty_dir() both take
inode mutex on the real lower dir under ovl_want_write() which takes
the upper_mnt sb_writers lock.

While this is not a clear locking order or layering violation, it creates
an undesired lock dependency between two unrelated layers for no good
reason.

This lock dependency materializes to a false(?) positive lockdep warning
when calling rmdir() on a nested overlayfs, where both nested and
underlying overlayfs both use the same fs type as upper layer.

rmdir() on the nested overlayfs creates the lock chain:
  sb_writers of upper_mnt (e.g. tmpfs) in ovl_do_remove()
  ovl_i_mutex_dir_key[] of lower overlay dir in ovl_lower_positive()

rmdir() on the underlying overlayfs creates the lock chain in
reverse order:
  ovl_i_mutex_dir_key[] of lower overlay dir in vfs_rmdir()
  sb_writers of nested upper_mnt (e.g. tmpfs) in ovl_do_remove()

To rid of the unneeded locking dependency, move both ovl_lower_positive()
and ovl_check_empty_dir() to before ovl_want_write() in rmdir() and
rename() implementation.

This change spreads the pieces of ovl_check_empty_and_clear() directly
inside the rmdir()/rename() implementations so the helper is no longer
needed and removed.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

As a writable mount, it is not expected for overlayfs to return
EINVAL/EROFS for fsync, even if dir/file is not changed.

This commit fixes the case of fsync of directory, which is easier to
address, because overlayfs already implements fsync file operation for
directories.

The problem reported by Raphael is that new PostgreSQL 10.0 with a
database in overlayfs where lower layer in squashfs fails to start.
The failure is due to fsync error, when PostgreSQL does fsync on all
existing db directories on startup and a specific directory exists
lower layer with no changes.
Reported-by: Raphael Hertzog <raphael@ouaza.com>
Cc: <stable@vger.kernel.org> # v3.18
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Raphaël Hertzog <hertzog@debian.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

fsnotify pins a watched directory inode in cache, but if directory dentry
is released, new lookup will allocate a new dentry and a new inode.
Directory events will be notified on the new inode, while fsnotify listener
is watching the old pinned inode.

Hash all directory inodes to reuse the pinned inode on lookup. Pure upper
dirs are hashes by real upper inode, merge and lower dirs are hashed by
real lower inode.

The reference to lower inode was being held by the lower dentry object
in the overlay dentry (oe->lowerstack[0]). Releasing the overlay dentry
may drop lower inode refcount to zero. Add a refcount on behalf of the
overlay inode to prevent that.

As a by-product, hashing directory inodes also detects multiple
redirected dirs to the same lower dir and uncovered redirected dir
target on and returns -ESTALE on lookup.

The reported issue dates back to initial version of overlayfs, but this
patch depends on ovl_inode code that was introduced in kernel v4.13.

Cc: <stable@vger.kernel.org> #v4.13
Reported-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Niklas Cassel <niklas.cassel@axis.com>

Pull x86 fixlet from Thomas Gleixner.

Remove a warning about lack of compiler support for retpoline that most
people can't do anything about, so it just annoys them needlessly.

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Remove compile time warning

Pull powerpc fixes from Michael Ellerman:
 "One fix for an oops at boot if we take a hotplug interrupt before we
  are ready to handle it.

  The bulk is patches to implement mitigation for Meltdown, see the
  change logs for more details.

  Thanks to: Nicholas Piggin, Michael Neuling, Oliver O'Halloran, Jon
  Masters, Jose Ricardo Ziviani, David Gibson"

* tag 'powerpc-4.15-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/powernv: Check device-tree for RFI flush settings
  powerpc/pseries: Query hypervisor for RFI flush settings
  powerpc/64s: Support disabling RFI flush with no_rfi_flush and nopti
  powerpc/64s: Add support for RFI flush of L1-D cache
  powerpc/64s: Convert slb_miss_common to use RFI_TO_USER/KERNEL
  powerpc/64: Convert fast_exception_return to use RFI_TO_USER/KERNEL
  powerpc/64: Convert the syscall exit path to use RFI_TO_USER/KERNEL
  powerpc/64s: Simple RFI macro conversions
  powerpc/64: Add macros for annotating the destination of rfid/hrfid
  powerpc/pseries: Add H_GET_CPU_CHARACTERISTICS flags & wrapper
  powerpc/pseries: Make RAS IRQ explicitly dependent on DLPAR WQ

Remove the compile time warning when CONFIG_RETPOLINE=y and the compiler
does not have retpoline support. Linus rationale for this is:

  It's wrong because it will just make people turn off RETPOLINE, and the
  asm updates - and return stack clearing - that are independent of the
  compiler are likely the most important parts because they are likely the
  ones easiest to target.

  And it's annoying because most people won't be able to do anything about
  it. The number of people building their own compiler? Very small. So if
  their distro hasn't got a compiler yet (and pretty much nobody does), the
  warning is just annoying crap.

  It is already properly reported as part of the sysfs interface. The
  compile-time warning only encourages bad things.

Fixes: 76b04384 ("x86/retpoline: Add initial retpoline support")
Requested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: thomas.lendacky@amd.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kees Cook <keescook@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Link: https://lkml.kernel.org/r/CA+55aFzWgquv4i6Mab6bASqYXg3ErV3XDFEYf=GEcCDQg5uAtw@mail.gmail.com

Pull NVMe fix from Jens Axboe:
 "Just a single fix for nvme over fabrics that should go into 4.15"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme-fabrics: initialize default host->id in nvmf_host_default()

Pull x86 pti updates from Thomas Gleixner:
 "This contains:

   - a PTI bugfix to avoid setting reserved CR3 bits when PCID is
     disabled. This seems to cause issues on a virtual machine at least
     and is incorrect according to the AMD manual.

   - a PTI bugfix which disables the perf BTS facility if PTI is
     enabled. The BTS AUX buffer is not globally visible and causes the
     CPU to fault when the mapping disappears on switching CR3 to user
     space. A full fix which restores BTS on PTI is non trivial and will
     be worked on.

   - PTI bugfixes for EFI and trusted boot which make sure that the user
     space visible page table entries have the NX bit cleared

   - removal of dead code in the PTI pagetable setup functions

   - add PTI documentation

   - add a selftest for vsyscall to verify that the kernel actually
     implements what it advertises.

   - a sysfs interface to expose vulnerability and mitigation
     information so there is a coherent way for users to retrieve the
     status.

   - the initial spectre_v2 mitigations, aka retpoline:

      + The necessary ASM thunk and compiler support

      + The ASM variants of retpoline and the conversion of affected ASM
        code

      + Make LFENCE serializing on AMD so it can be used as speculation
        trap

      + The RSB fill after vmexit

   - initial objtool support for retpoline

  As I said in the status mail this is the most of the set of patches
  which should go into 4.15 except two straight forward patches still on
  hold:

   - the retpoline add on of LFENCE which waits for ACKs

   - the RSB fill after context switch

  Both should be ready to go early next week and with that we'll have
  covered the major holes of spectre_v2 and go back to normality"

* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (28 commits)
  x86,perf: Disable intel_bts when PTI
  security/Kconfig: Correct the Documentation reference for PTI
  x86/pti: Fix !PCID and sanitize defines
  selftests/x86: Add test_vsyscall
  x86/retpoline: Fill return stack buffer on vmexit
  x86/retpoline/irq32: Convert assembler indirect jumps
  x86/retpoline/checksum32: Convert assembler indirect jumps
  x86/retpoline/xen: Convert Xen hypercall indirect jumps
  x86/retpoline/hyperv: Convert assembler indirect jumps
  x86/retpoline/ftrace: Convert ftrace assembler indirect jumps
  x86/retpoline/entry: Convert entry assembler indirect jumps
  x86/retpoline/crypto: Convert crypto assembler indirect jumps
  x86/spectre: Add boot time option to select Spectre v2 mitigation
  x86/retpoline: Add initial retpoline support
  objtool: Allow alternatives to be ignored
  objtool: Detect jumps to retpoline thunks
  x86/pti: Make unpoison of pgd for trusted boot work for real
  x86/alternatives: Fix optimize_nops() checking
  sysfs/cpu: Fix typos in vulnerability documentation
  x86/cpu/AMD: Use LFENCE_RDTSC in preference to MFENCE_RDTSC
  ...

The intel_bts driver does not use the 'normal' BTS buffer which is exposed
through the cpu_entry_area but instead uses the memory allocated for the
perf AUX buffer.

This obviously comes apart when using PTI because then the kernel mapping;
which includes that AUX buffer memory; disappears. Fixing this requires to
expose a mapping which is visible in all context and that's not trivial.

As a quick fix disable this driver when PTI is enabled to prevent
malfunction.

Fixes: 385ce0ea ("x86/mm/pti: Add Kconfig")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: greg@kroah.com
Cc: hughd@google.com
Cc: luto@amacapital.net
Cc: Vince Weaver <vince@deater.net>
Cc: torvalds@linux-foundation.org
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20180114102713.GB6166@worktop.programming.kicks-ass.net

When the config option for PTI was added a reference to documentation was
added as well. But the documentation did not exist at that point. The final
documentation has a different file name.

Fix it up to point to the proper file.

Fixes: 385ce0ea ("x86/mm/pti: Add Kconfig")
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: linux-mm@kvack.org
Cc: linux-security-module@vger.kernel.org
Cc: James Morris <james.l.morris@oracle.com>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/3009cc8ccbddcd897ec1e0cb6dda524929de0d14.1515799398.git.wking@tremily.us

The switch to the user space page tables in the low level ASM code sets
unconditionally bit 12 and bit 11 of CR3. Bit 12 is switching the base
address of the page directory to the user part, bit 11 is switching the
PCID to the PCID associated with the user page tables.

This fails on a machine which lacks PCID support because bit 11 is set in
CR3. Bit 11 is reserved when PCID is inactive.

While the Intel SDM claims that the reserved bits are ignored when PCID is
disabled, the AMD APM states that they should be cleared.

This went unnoticed as the AMD APM was not checked when the code was
developed and reviewed and test systems with Intel CPUs never failed to
boot. The report is against a Centos 6 host where the guest fails to boot,
so it's not yet clear whether this is a virt issue or can happen on real
hardware too, but thats irrelevant as the AMD APM clearly ask for clearing
the reserved bits.

Make sure that on non PCID machines bit 11 is not set by the page table
switching code.

Andy suggested to rename the related bits and masks so they are clearly
describing what they should be used for, which is done as well for clarity.

That split could have been done with alternatives but the macro hell is
horrible and ugly. This can be done on top if someone cares to remove the
extra orq. For now it's a straight forward fix.

Fixes: 6fd166aa ("x86/mm: Use/Fix PCID to optimize user/kernel switches")
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable <stable@vger.kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Willy Tarreau <w@1wt.eu>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1801140009150.2371@nanos

Pull USB fixes from Greg KH:
 "Here are some small USB fixes and device ids for 4.15-rc8

  Nothing major, small fixes for various devices, some resolutions for
  bugs found by fuzzers, and the usual handful of new device ids.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Documentation: usb: fix typo in UVC gadgetfs config command
  usb: misc: usb3503: make sure reset is low for at least 100us
  uas: ignore UAS for Norelsys NS1068(X) chips
  USB: UDC core: fix double-free in usb_add_gadget_udc_release
  USB: fix usbmon BUG trigger
  usbip: vudc_tx: fix v_send_ret_submit() vulnerability to null xfer buffer
  usbip: remove kernel addresses from usb device and urb debug msgs
  usbip: fix vudc_rx: harden CMD_SUBMIT path to handle malicious input
  USB: serial: cp210x: add new device ID ELV ALC 8xxx
  USB: serial: cp210x: add IDs for LifeScan OneTouch Verio IQ

Pull staging driver fix from Greg KH:
 "Here is a single android ashmem bugfix that resolves a reported issue
  in that interface. It's been in linux-next this week with no reported
  issues"

* tag 'staging-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ashmem: fix a race condition in ASHMEM_SET_SIZE ioctl

Pull char/misc fixes from Greg KH:
 "Here are two bugfixes for some driver bugs for 4.15-rc8

  The first is a bluetooth security bug that has been ignored by the
  Bluetooth developers for months for no obvious reason at all, so I've
  taken it through my tree.

  The second is a simple double-free bug in the mux subsystem.

  Both have been in linux-next for a while with no reported issues"

* tag 'char-misc-4.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mux: core: fix double get_device()
  Bluetooth: Prevent stack info leak from the EFS element.

Merge tag 'kbuild-fixes-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - fix cross-compilation for architectures that setup CROSS_COMPILE in
   their arch Makefile

 - fix Kconfig rational operators for bool / tristate

 - drop a gperf-generated file from .gitignore

* tag 'kbuild-fixes-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  genksyms: drop *.hash.c from .gitignore
  kconfig: fix relational operators for bool and tristate symbols
  kbuild: move cc-option and cc-disable-warning after incl. arch Makefile

Merge tag 'apparmor-pr-2018-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor

Pull apparmor regression fixes from John Johansen:
 "This fixes a couple bugs I have been working with Matthew Garrett on
  this week. Specifically a regression in the handling of a conflicting
  profile attachment and label match restrictions for ptrace when
  profiles are stacked.

  Summary:

   - fix ptrace label match when matching stacked labels

   - fix regression in profile conflict logic"

* tag 'apparmor-pr-2018-01-12' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor:
  apparmor: Fix regression in profile conflict logic
  apparmor: fix ptrace label match when matching stacked labels

Pull PCI fixes from Bjorn Helgaas:
 "Fix AMD boot regression due to 64-bit window conflicting with system
  memory (Christian König)"

* tag 'pci-v4.15-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  x86/PCI: Move and shrink AMD 64-bit window to avoid conflict
  x86/PCI: Add "pci=big_root_window" option for AMD 64-bit windows

Merge misc fixlets from Andrew Morton:
 "4 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  tools/objtool/Makefile: don't assume sync-check.sh is executable
  kdump: write correct address of mem_section into vmcoreinfo
  kmemleak: allow to coexist with fault injection
  MAINTAINERS, nilfs2: change project home URLs

patch(1) loses the x bit.  So if a user follows our patching
instructions in Documentation/admin-guide/README.rst, their kernel will
not compile.

Fixes: 3bd51c5a ("objtool: Move kernel headers/code sync check to a script")
Reported-by: Nicolas Bock <nicolasbock@gentoo.org>
Reported-by Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Depending on configuration mem_section can now be an array or a pointer
to an array allocated dynamically.  In most cases, we can continue to
refer to it as 'mem_section' regardless of what it is.

But there's one exception: '&mem_section' means "address of the array"
if mem_section is an array, but if mem_section is a pointer, it would
mean "address of the pointer".

We've stepped onto this in kdump code.  VMCOREINFO_SYMBOL(mem_section)
writes down address of pointer into vmcoreinfo, not array as we wanted.

Let's introduce VMCOREINFO_SYMBOL_ARRAY() that would handle the
situation correctly for both cases.

Link: http://lkml.kernel.org/r/20180112162532.35896-1-kirill.shutemov@linux.intel.comSigned-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Fixes: 83e3c487 ("mm/sparsemem: Allocate mem_section at runtime for CONFIG_SPARSEMEM_EXTREME=y")
Acked-by: Baoquan He <bhe@redhat.com>
Acked-by: Dave Young <dyoung@redhat.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kmemleak does one slab allocation per user allocation.  So if slab fault
injection is enabled to any degree, kmemleak instantly fails to allocate
and turns itself off.  However, it's useful to use kmemleak with fault
injection to find leaks on error paths.  On the other hand, checking
kmemleak itself is not so useful because (1) it's a debugging tool and
(2) it has a very regular allocation pattern (basically a single
allocation site, so it either works or not).

Turn off fault injection for kmemleak allocations.

Link: http://lkml.kernel.org/r/20180109192243.19316-1-dvyukov@google.comSigned-off-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The domain of NILFS project home was changed to "nilfs.sourceforge.io"
to enable https access (the previous domain "nilfs.sourceforge.net" is
redirected to the new one).  Modify URLs of the project home to reflect
this change and to replace their protocol from http to https.

Link: http://lkml.kernel.org/r/1515416141-5614-1-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is a left-over of commit bb3290d9 ("Remove gperf usage from
toolchain").

We do not generate a hash function any more.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

This tests that the vsyscall entries do what they're expected to do.
It also confirms that attempts to read the vsyscall page behave as
expected.

If changes are made to the vsyscall code or its memory map handling,
running this test in all three of vsyscall=none, vsyscall=emulate,
and vsyscall=native are helpful.

(Because it's easy, this also compares the vsyscall results to their
 vDSO equivalents.)

Note to KAISER backporters: please test this under all three
vsyscall modes.  Also, in the emulate and native modes, make sure
that test_vsyscall_64 agrees with the command line or config
option as to which mode you're in.  It's quite easy to mess up
the kernel such that native mode accidentally emulates
or vice versa.

Greg, etc: please backport this to all your Meltdown-patched
kernels.  It'll help make sure the patches didn't regress
vsyscalls.
CSigned-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/2b9c5a174c1d60fd7774461d518aa75598b1d8fd.1515719552.git.luto@kernel.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

The intended behaviour in apparmor profile matching is to flag a
conflict if two profiles match equally well. However, right now a
conflict is generated if another profile has the same match length even
if that profile doesn't actually match. Fix the logic so we only
generate a conflict if the profiles match.

Fixes: 844b8292 ("apparmor: ensure that undecidable profile attachments fail")
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

Given a label with a profile stack of
  A//&B or A//&C ...

A ptrace rule should be able to specify a generic trace pattern with
a rule like

  ptrace trace A//&**,

however this is failing because while the correct label match routine
is called, it is being done post label decomposition so it is always
being done against a profile instead of the stacked label.

To fix this refactor the cross check to pass the full peer label in to
the label_match.

Fixes: 290f458a ("apparmor: allow ptrace checks to be finer grained than just capability")
Cc: Stable <stable@vger.kernel.org>
Reported-by: Matthew Garrett <mjg59@google.com>
Tested-by: Matthew Garrett <mjg59@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>

Pull x86 fixes from Ingo Molnar:
 "Two pending (non-PTI) x86 fixes:

   - an Intel-MID crash fix

   - and an Intel microcode loader blacklist quirk to avoid a
     problematic revision"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/intel-mid: Revert "Make 'bt_sfi_data' const"
  x86/microcode/intel: Extend BDW late-loading with a revision check

Pull scheduler fixes from Ingo Molnar:
 "A Kconfig fix, a build fix and a membarrier bug fix"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  membarrier: Disable preemption when calling smp_call_function_many()
  sched/isolation: Make CONFIG_CPU_ISOLATION=y depend on SMP or COMPILE_TEST
  ia64, sched/cputime: Fix build error if CONFIG_VIRT_CPU_ACCOUNTING_NATIVE=y

Pull locking fixes from Ingo Molnar:
 "No functional effects intended: removes leftovers from recent lockdep
  and refcounts work"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/refcounts: Remove stale comment from the ARCH_HAS_REFCOUNT Kconfig entry
  locking/lockdep: Remove cross-release leftovers
  locking/Documentation: Remove stale crossrelease_fullstack parameter

Pull xen fixes from Juergen Gross:
 "This contains two build fixes for clang and two fixes for rather
  unlikely situations in the Xen gntdev driver"

* tag 'for-linus-4.15-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/gntdev: Fix partial gntdev_mmap() cleanup
  xen/gntdev: Fix off-by-one error when unmapping with holes
  x86: xen: remove the use of VLAIS
  x86/xen/time: fix section mismatch for xen_init_time_ops()

Pull KVM fixes from Paolo Bonzini:
 "PPC:
   - user-triggerable use-after-free in HPT resizing
   - stale TLB entries in the guest
   - trap-and-emulate (PR) KVM guests failing to start under pHyp

  x86:
   - Another "Spectre" fix.
   - async pagefault fix
   - Revert an old fix for x86 nested virtualization, which turned out
     to do more harm than good
   - Check shrinker registration return code, to avoid warnings from
     upcoming 4.16 -mm patches"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Add memory barrier on vmcs field lookup
  KVM: x86: emulate #UD while in guest mode
  x86: kvm: propagate register_shrinker return code
  KVM MMU: check pending exception before injecting APF
  KVM: PPC: Book3S HV: Always flush TLB in kvmppc_alloc_reset_hpt()
  KVM: PPC: Book3S PR: Fix WIMG handling under pHyp
  KVM: PPC: Book3S HV: Fix use after free in case of multiple resize requests
  KVM: PPC: Book3S HV: Drop prepare_done from struct kvm_resize_hpt

Pull crypto fix from Herbert Xu:
 "This fixes a NULL pointer dereference in crypto_remove_spawns that can
  be triggered through af_alg"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algapi - fix NULL dereference in crypto_remove_spawns()

Pull a single NVMe fix from Christoph for 4.15.

Pull MMC host fixes from Ulf Hansson:

 - s3mci: mark debug_regs[] as static

 - renesas_sdhi: Add MODULE_LICENSE

* tag 'mmc-v4.15-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: s3mci: mark debug_regs[] as static
  mmc: renesas_sdhi: Add MODULE_LICENSE

Pull drm fixes from Dave Airlie:

 - Nouveau: regression fix

 - Tegra: regression fix

 - vmwgfx: crasher + freed data leak

 - i915: KASAN use after free fix, whitelist register to avoid hang fix,
   GVT fixes

 - vc4: irq/pm fix

* tag 'drm-fixes-for-v4.15-rc8' of git://people.freedesktop.org/~airlied/linux:
  drm/i915: Don't adjust priority on an already signaled fence
  drm/i915: Whitelist SLICE_COMMON_ECO_CHICKEN1 on Geminilake.
  drm/vmwgfx: Potential off by one in vmw_view_add()
  drm/tegra: sor: Fix hang on Tegra124 eDP
  drm/vmwgfx: Don't cache framebuffer maps
  drm/nouveau/disp/gf119: add missing drive vfunc ptr
  drm/i915/gvt: Fix stack-out-of-bounds bug in cmd parser
  drm/i915/gvt: Clear the shadow page table entry after post-sync
  drm/vc4: Move IRQ enable to PM path