The new Atmel MXT driver expects i2c client's address contain the
primary (main address) of the chip, and calculates the expected
bootloader address form the primary address. Unfortunately chrome_laptop
does probe the devices and if touchpad (or touchscreen, or both) comes
up in bootloader mode the i2c device gets instantiated with the
bootloader address which confuses the driver.

To work around this issue let's probe the primary address first. If the
device is not detected at the primary address we'll probe alternative
addresses as "dummy" devices. If any of them are found, destroy the
dummy client and instantiate client with proper name at primary address
still.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

The ChromeOS EC is connected by LPC only on x86 platforms and no others,
so add a dependency describing that.

But also build the driver if the COMPILE_TEST option is enabled
to have build coverage in other architectures.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
[olof: reworded commit message]
Signed-off-by: Olof Johansson <olof@lixom.net>

The driver uses the inb() and outb() I/O functions so should
include the header file that has these functions definitions.

This patch fixes the following error when the header is not
explicitly included:

drivers/platform/chrome//cros_ec_lpc.c: In function ‘ec_response_timed_out’:
drivers/platform/chrome//cros_ec_lpc.c:40:3: error: implicit declaration of function ‘inb’ [-Werror=implicit-function-declaration]
drivers/platform/chrome//cros_ec_lpc.c: In function ‘cros_ec_cmd_xfer_lpc’:
drivers/platform/chrome//cros_ec_lpc.c:75:3: error: implicit declaration of function ‘outb’ [-Werror=implicit-function-declaration]
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>

drivers/platform/chrome/cros_ec_lpc.c:272:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

CC: Bill Richardson <wfrichar@chromium.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

Fix the following sparse warning:

    drivers/platform/chrome/cros_ec_lightbar.c:254:25: sparse: duplicate const
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Olof Johansson <olofj@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>

Fix the following sparse warning:

    drivers/platform/chrome/cros_ec_dev.c:64:45: sparse: Unknown escape '%'
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Olof Johansson <olofj@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Olof Johansson <olof@lixom.net>

This adds some sysfs entries to provide userspace control of the
four-element LED "lightbar" on the Chromebook Pixel. This only instantiates
the lightbar controls if the device actually exists.

To prevent DoS attacks, this interface is limited to 20 accesses/second,
although that rate can be adjusted by a privileged user.

On Chromebooks without a lightbar, this should have no effect. On the
Chromebook Pixel, you should be able to do things like this:

    $ cd /sys/devices/virtual/chromeos/cros_ec/lightbar
    $ echo 0x80 > brightness
    $ echo 255 > brightness
    $
    $ cat sequence
    S0
    $ echo konami > sequence
    $ cat sequence
    KONAMI
    $
    $ cat sequence
    S0

And

    $ cd /sys/devices/virtual/chromeos/cros_ec/lightbar
    $ echo stop > sequence
    $ echo "4 255 255 255" > led_rgb
    $ echo "0 255 0 0  1 0 255 0  2 0 0 255  3 255 255 0" > led_rgb
    $ echo run  > sequence

Test the DoS prevention with this:

    $ cd /sys/devices/virtual/chromeos/cros_ec/lightbar
    $ echo 500 > interval_msec
    $ time (cat version version version version version version version)
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

This adds the first few sysfs attributes for the Chrome OS EC. These
controls are made available under /sys/devices/virtual/chromeos/cros_ec

    flashinfo   - display current flash info
    reboot      - tell the EC to reboot in various ways
    version     - information about the EC software and hardware

Future changes will build on this to add additional controls.

From a root shell, you should be able to do things like this:

    cd /sys/devices/virtual/chromeos/cros_ec
    cat flashinfo
    cat version
    echo rw > reboot
    cat version
    echo ro > reboot
    cat version
    echo rw > reboot
    cat version
    echo cold > reboot

That last command will reboot the AP too.
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Olof Johansson <olofj@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The ChromeOS EC character device is an user-space interface to
allow applications to access the Embedded Controller.

Add a cell for this device so it's spawned from the mfd driver.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

This patch adds a device interface to access the
Chrome OS Embedded Controller from user-space.
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Reviewed-by: Simon Glass <sjg@google.com>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

Chromebooks have an Embedded Controller (EC) that is used to
implement various functions such as keyboard, power and battery.

The AP can communicate with the EC through different bus types
such as I2C, SPI or LPC.

The cros_ec mfd driver is then composed of a core driver that
register the sub-devices as mfd cells and provide a high level
communication interface that is used by the rest of the kernel
and bus specific interfaces modules.

Each connection method then has its own driver, which register
with the EC driver interface-agnostic interface.

Currently, there are drivers to communicate with the EC over
I2C and SPI and this driver adds support for LPC.
Signed-off-by: Bill Richardson <wfrichar@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The ChromeOS Embedded Controller has to be accessed by applications.
A virtual character device is used as an interface with user-space.

Extend the struct cros_ec_device with the fields needed by the driver
of this virtual character device.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

The struct cros_ec_command will be used as an ioctl() argument for the
API to control the ChromeOS EC from user-space. So the data structure
has to be 64-bit safe to make it compatible between 32 and 64 avoiding
the need for a compat ioctl interface. Since pointers are self-aligned
to different byte boundaries, use fixed size arrays instead of pointers
for transferring ingoing and outgoing data with the Embedded Controller.

Also, re-arrange struct members by decreasing alignment requirements to
reduce the needing padding size.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Lee Jones <lee.jones@linaro.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

.. after extensive statistical analysis of my G+ polling, I've come to
the inescapable conclusion that internet polls are bad.

Big surprise.

But "Hurr durr I'ma sheep" trounced "I like online polls" by a 62-to-38%
margin, in a poll that people weren't even supposed to participate in.
Who can argue with solid numbers like that? 5,796 votes from people who
can't even follow the most basic directions?

In contrast, "v4.0" beat out "v3.20" by a slimmer margin of 56-to-44%,
but with a total of 29,110 votes right now.

Now, arguably, that vote spread is only about 3,200 votes, which is less
than the almost six thousand votes that the "please ignore" poll got, so
it could be considered noise.

But hey, I asked, so I'll honor the votes.

Pull ext4 fixes from Ted Ts'o:
 "Ext4 bug fixes.

  We also reserved code points for encryption and read-only images (for
  which the implementation is mostly just the reserved code point for a
  read-only feature :-)"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix indirect punch hole corruption
  ext4: ignore journal checksum on remount; don't fail
  ext4: remove duplicate remount check for JOURNAL_CHECKSUM change
  ext4: fix mmap data corruption in nodelalloc mode when blocksize < pagesize
  ext4: support read-only images
  ext4: change to use setup_timer() instead of init_timer()
  ext4: reserve codepoints used by the ext4 encryption feature
  jbd2: complain about descriptor block checksum errors

Pull more vfs updates from Al Viro:
 "Assorted stuff from this cycle.  The big ones here are multilayer
  overlayfs from Miklos and beginning of sorting ->d_inode accesses out
  from David"

* 'for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (51 commits)
  autofs4 copy_dev_ioctl(): keep the value of ->size we'd used for allocation
  procfs: fix race between symlink removals and traversals
  debugfs: leave freeing a symlink body until inode eviction
  Documentation/filesystems/Locking: ->get_sb() is long gone
  trylock_super(): replacement for grab_super_passive()
  fanotify: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
  Cachefiles: Fix up scripted S_ISDIR/S_ISREG/S_ISLNK conversions
  VFS: (Scripted) Convert S_ISLNK/DIR/REG(dentry->d_inode) to d_is_*(dentry)
  SELinux: Use d_is_positive() rather than testing dentry->d_inode
  Smack: Use d_is_positive() rather than testing dentry->d_inode
  TOMOYO: Use d_is_dir() rather than d_inode and S_ISDIR()
  Apparmor: Use d_is_positive/negative() rather than testing dentry->d_inode
  Apparmor: mediated_filesystem() should use dentry->d_sb not inode->i_sb
  VFS: Split DCACHE_FILE_TYPE into regular and special types
  VFS: Add a fallthrough flag for marking virtual dentries
  VFS: Add a whiteout dentry type
  VFS: Introduce inode-getting helpers for layered/unioned fs environments
  Infiniband: Fix potential NULL d_inode dereference
  posix_acl: fix reference leaks in posix_acl_create
  autofs4: Wrong format for printing dentry
  ...

Pull ARM fix from Russell King:
 "Just one fix this time around.  __iommu_alloc_buffer() can cause a
  BUG() if dma_alloc_coherent() is called with either __GFP_DMA32 or
  __GFP_HIGHMEM set.  The patch from Alexandre addresses this"

* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
  ARM: 8305/1: DMA: Fix kzalloc flags in __iommu_alloc_buffer()

X-Coverup: just ask spender
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

use_pde()/unuse_pde() in ->follow_link()/->put_link() resp.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

As it is, we have debugfs_remove() racing with symlink traversals.
Supply ->evict_inode() and do freeing there - inode will remain
pinned until we are done with the symlink body.

And rip the idiocy with checking if dentry is positive right after
we'd verified debugfs_positive(), which is a stronger check...

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

I've noticed significant locking contention in memory reclaimer around
sb_lock inside grab_super_passive(). Grab_super_passive() is called from
two places: in icache/dcache shrinkers (function super_cache_scan) and
from writeback (function __writeback_inodes_wb). Both are required for
progress in memory allocator.

Grab_super_passive() acquires sb_lock to increment sb->s_count and check
sb->s_instances. It seems sb->s_umount locked for read is enough here:
super-block deactivation always runs under sb->s_umount locked for write.
Protecting super-block itself isn't a problem: in super_cache_scan() sb
is protected by shrinker_rwsem: it cannot be freed if its slab shrinkers
are still active. Inside writeback super-block comes from inode from bdi
writeback list under wb->list_lock.

This patch removes locking sb_lock and checks s_instances under s_umount:
generic_shutdown_super() unlinks it under sb->s_umount locked for write.
New variant is called trylock_super() and since it only locks semaphore,
callers must call up_read(&sb->s_umount) instead of drop_super(sb) when
they're done.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Fanotify probably doesn't want to watch autodirs so make it use d_can_lookup()
rather than d_is_dir() when checking a dir watch and give an error on fake
directories.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Fix up the following scripted S_ISDIR/S_ISREG/S_ISLNK conversions (or lack
thereof) in cachefiles:

 (1) Cachefiles mostly wants to use d_can_lookup() rather than d_is_dir() as
     it doesn't want to deal with automounts in its cache.

 (2) Coccinelle didn't find S_IS* expressions in ASSERT() statements in
     cachefiles.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Convert the following where appropriate:

 (1) S_ISLNK(dentry->d_inode) to d_is_symlink(dentry).

 (2) S_ISREG(dentry->d_inode) to d_is_reg(dentry).

 (3) S_ISDIR(dentry->d_inode) to d_is_dir(dentry).  This is actually more
     complicated than it appears as some calls should be converted to
     d_can_lookup() instead.  The difference is whether the directory in
     question is a real dir with a ->lookup op or whether it's a fake dir with
     a ->d_automount op.

In some circumstances, we can subsume checks for dentry->d_inode not being
NULL into this, provided we the code isn't in a filesystem that expects
d_inode to be NULL if the dirent really *is* negative (ie. if we're going to
use d_inode() rather than d_backing_inode() to get the inode pointer).

Note that the dentry type field may be set to something other than
DCACHE_MISS_TYPE when d_inode is NULL in the case of unionmount, where the VFS
manages the fall-through from a negative dentry to a lower layer.  In such a
case, the dentry type of the negative union dentry is set to the same as the
type of the lower dentry.

However, if you know d_inode is not NULL at the call site, then you can use
the d_is_xxx() functions even in a filesystem.

There is one further complication: a 0,0 chardev dentry may be labelled
DCACHE_WHITEOUT_TYPE rather than DCACHE_SPECIAL_TYPE.  Strictly, this was
intended for special directory entry types that don't have attached inodes.

The following perl+coccinelle script was used:

use strict;

my @callers;
open($fd, 'git grep -l \'S_IS[A-Z].*->d_inode\' |') ||
    die "Can't grep for S_ISDIR and co. callers";
@callers = <$fd>;
close($fd);
unless (@callers) {
    print "No matches\n";
    exit(0);
}

my @cocci = (
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISLNK(E->d_inode->i_mode)',
    '+ d_is_symlink(E)',
    '',
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISDIR(E->d_inode->i_mode)',
    '+ d_is_dir(E)',
    '',
    '@@',
    'expression E;',
    '@@',
    '',
    '- S_ISREG(E->d_inode->i_mode)',
    '+ d_is_reg(E)' );

my $coccifile = "tmp.sp.cocci";
open($fd, ">$coccifile") || die $coccifile;
print($fd "$_\n") || die $coccifile foreach (@cocci);
close($fd);

foreach my $file (@callers) {
    chomp $file;
    print "Processing ", $file, "\n";
    system("spatch", "--sp-file", $coccifile, $file, "--in-place", "--no-show-diff") == 0 ||
	die "spatch failed";
}

[AV: overlayfs parts skipped]
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Use d_is_positive() rather than testing dentry->d_inode in SELinux to get rid
of direct references to d_inode outside of the VFS.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Use d_is_positive() rather than testing dentry->d_inode in Smack to get rid of
direct references to d_inode outside of the VFS.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Use d_is_dir() rather than d_inode and S_ISDIR().  Note that this will include
fake directories such as automount triggers.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Use d_is_positive(dentry) or d_is_negative(dentry) rather than testing
dentry->d_inode as the dentry may cover another layer that has an inode when
the top layer doesn't or may hold a 0,0 chardev that's actually a whiteout.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

mediated_filesystem() should use dentry->d_sb not dentry->d_inode->i_sb and
should avoid file_inode() also since it is really dealing with the path.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Split DCACHE_FILE_TYPE into DCACHE_REGULAR_TYPE (dentries representing regular
files) and DCACHE_SPECIAL_TYPE (representing blockdev, chardev, FIFO and
socket files).

d_is_reg() and d_is_special() are added to detect these subtypes and
d_is_file() is left as the union of the two.

This allows a number of places that use S_ISREG(dentry->d_inode->i_mode) to
use d_is_reg(dentry) instead.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a DCACHE_FALLTHRU flag to indicate that, in a layered filesystem, this is
a virtual dentry that covers another one in a lower layer that should be used
instead.  This may be recorded on medium if directory integration is stored
there.

The flag can be set with d_set_fallthru() and tested with d_is_fallthru().

Original-author: Valerie Aurora <vaurora@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add DCACHE_WHITEOUT_TYPE and provide a d_is_whiteout() accessor function.  A
d_is_miss() accessor is also added for ordinary cache misses and
d_is_negative() is modified to indicate either an ordinary miss or an enforced
miss (whiteout).
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Introduce some function for getting the inode (and also the dentry) in an
environment where layered/unioned filesystems are in operation.

The problem is that we have places where we need *both* the union dentry and
the lower source or workspace inode or dentry available, but we can only have
a handle on one of them.  Therefore we need to derive the handle to the other
from that.

The idea is to introduce an extra field in struct dentry that allows the union
dentry to refer to and pin the lower dentry.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Pull MIPS updates from Ralf Baechle:
 "This is the main pull request for MIPS:

   - a number of fixes that didn't make the 3.19 release.

   - a number of cleanups.

   - preliminary support for Cavium's Octeon 3 SOCs which feature up to
     48 MIPS64 R3 cores with FPU and hardware virtualization.

   - support for MIPS R6 processors.

     Revision 6 of the MIPS architecture is a major revision of the MIPS
     architecture which does away with many of original sins of the
     architecture such as branch delay slots.  This and other changes in
     R6 require major changes throughout the entire MIPS core
     architecture code and make up for the lion share of this pull
     request.

   - finally some preparatory work for eXtendend Physical Address
     support, which allows support of up to 40 bit of physical address
     space on 32 bit processors"

     [ Ahh, MIPS can't leave the PAE brain damage alone.  It's like
       every CPU architect has to make that mistake, but pee in the snow
       by changing the TLA.  But whether it's called PAE, LPAE or XPA,
       it's horrid crud   - Linus ]

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (114 commits)
  MIPS: sead3: Corrected get_c0_perfcount_int
  MIPS: mm: Remove dead macro definitions
  MIPS: OCTEON: irq: add CIB and other fixes
  MIPS: OCTEON: Don't do acknowledge operations for level triggered irqs.
  MIPS: OCTEON: More OCTEONIII support
  MIPS: OCTEON: Remove setting of processor specific CVMCTL icache bits.
  MIPS: OCTEON: Core-15169 Workaround and general CVMSEG cleanup.
  MIPS: OCTEON: Update octeon-model.h code for new SoCs.
  MIPS: OCTEON: Implement DCache errata workaround for all CN6XXX
  MIPS: OCTEON: Add little-endian support to asm/octeon/octeon.h
  MIPS: OCTEON: Implement the core-16057 workaround
  MIPS: OCTEON: Delete unused COP2 saving code
  MIPS: OCTEON: Use correct instruction to read 64-bit COP0 register
  MIPS: OCTEON: Save and restore CP2 SHA3 state
  MIPS: OCTEON: Fix FP context save.
  MIPS: OCTEON: Save/Restore wider multiply registers in OCTEON III CPUs
  MIPS: boot: Provide more uImage options
  MIPS: Remove unneeded #ifdef __KERNEL__ from asm/processor.h
  MIPS: ip22-gio: Remove legacy suspend/resume support
  mips: pci: Add ifdef around pci_proc_domain
  ...

Pull ARM SoC fixes from Arnd Bergmann:
 "A few fixes that came in too late to make it into the first set of
  pull requests but would still be nice to have in -rc1.

  The majority of these are trivial build fixes for bugs that I found
  myself using randconfig testing, and a set of two patches from Uwe to
  mark DT strings as 'const' where appropriate, to resolve inconsistent
  section attributes"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: make of_device_ids const
  ARM: make arrays containing machine compatible strings const
  ARM: mm: Remove Kconfig symbol CACHE_PL310
  ARM: rockchip: force built-in regulator support for PM
  ARM: mvebu: build armada375-smp code conditionally
  ARM: sti: always enable RESET_CONTROLLER
  ARM: rockchip: make rockchip_suspend_init conditional
  ARM: ixp4xx: fix {in,out}s{bwl} data types
  ARM: prima2: do not select SMP_ON_UP
  ARM: at91: fix pm declarations
  ARM: davinci: multi-soc kernels require AUTO_ZRELADDR
  ARM: davinci: davinci_cfg_reg cannot be init
  ARM: BCM: put back ARCH_MULTI_V7 dependency for mobile
  ARM: vexpress: use ARM_CPU_SUSPEND if needed
  ARM: dts: add I2C device nodes for Broadcom Cygnus
  ARM: dts: BCM63xx: fix L2 cache properties

Pull misc SCSI patches from James Bottomley:
 "This is a short patch set representing a couple of left overs from the
  merge window (debug removal and MAINTAINER changes).

  Plus one merge window regression (the local workqueue for hpsa) and a
  set of bug fixes for several issues (two for scsi-mq and the rest an
  assortment of long standing stuff, all cc'd to stable)"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  sg: fix EWOULDBLOCK errors with scsi-mq
  sg: fix unkillable I/O wait deadlock with scsi-mq
  sg: fix read() error reporting
  wd719x: add missing .module to wd719x_template
  hpsa: correct compiler warnings introduced by hpsa-add-local-workqueue patch
  fixed invalid assignment of 64bit mask to host dma_boundary for scatter gather segment boundary limit.
  fcoe: Transition maintainership to Vasu
  am53c974: remove left-over debugging code

Merge tag 'xfs-pnfs-for-linus-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs

Pull xfs pnfs block layout support from Dave Chinner:
 "This contains the changes to XFS needed to support the PNFS block
  layout server that you pulled in through Bruce's NFS server tree
  merge.

  I originally thought that I'd need to merge changes into the NFS
  server side, but Bruce had already picked them up and so this is
  purely changes to the fs/xfs/ codebase.

  Summary:

  This update contains the implementation of the PNFS server export
  methods that enable use of XFS filesystems as a block layout target"

* tag 'xfs-pnfs-for-linus-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: recall pNFS layouts on conflicting access
  xfs: implement pNFS export operations

Pull more NFS client updates from Trond Myklebust:
 "Highlights include:

   - Fix a use-after-free in decode_cb_sequence_args()
   - Fix a compile error when #undef CONFIG_PROC_FS
   - NFSv4.1 backchannel spinlocking issue
   - Cleanups in the NFS unstable write code requested by Linus
   - NFSv4.1 fix issues when the server denies our backchannel request
   - Cleanups in create_session and bind_conn_to_session"

* tag 'nfs-for-3.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4.1: Clean up bind_conn_to_session
  NFSv4.1: Always set up a forward channel when binding the session
  NFSv4.1: Don't set up a backchannel if the server didn't agree to do so
  NFSv4.1: Clean up create_session
  pnfs: Refactor the *_layout_mark_request_commit to use pnfs_layout_mark_request_commit
  NFSv4: Kill unused nfs_inode->delegation_state field
  NFS: struct nfs_commit_info.lock must always point to inode->i_lock
  nfs: Can call nfs_clear_page_commit() instead
  nfs: Provide and use helper functions for marking a page as unstable
  SUNRPC: Always manipulate rpc_rqst::rq_bc_pa_list under xprt->bc_pa_lock
  SUNRPC: Fix a compile error when #undef CONFIG_PROC_FS
  NFSv4.1: Convert open-coded array allocation calls to kmalloc_array()
  NFSv4.1: Fix a kfree() of uninitialised pointers in decode_cb_sequence_args

Pull one more batch of power management and ACPI updates from Rafael Wysocki:
 "These are mostly fixes on top of the previously merged recent PM and
  ACPI material.

  First, one commit that broke the ACPI LPSS (Low-Power Subsystem)
  driver on a Dell box is reverted and there are two stable-candidate
  fixes for that driver.  Another fix cleans up two recently added ACPI
  EC messages that look odd and the printk level of a noisy debug
  message in the core ACPI resources handling code is reduced.

  In addition to that we have two stable-candidate fixes for the s3c
  cpufreq driver, two cpuidle powernv driver updates related to Device
  Trees and a PNP subsystem cleanup that will allow us to get rid of
  some old ugliness going forward.  Also there is a new blacklist entry
  for the ACPI backlight code.

  Specifics:

   - Revert a recent ACPI LPSS driver commit that prevented the touchpad
     driver from loading on Dell XPS13 (Jarkko Nikula).

   - Make the ACPI LPSS driver disable the I2C controllers and deassert
     SPI host controllers resets at startup on Intel BayTrail and
     Braswell SoCs in case they have been left in wrong states by the
     platform firmware which then may casuse fatal controller driver
     failures during resume from hibernation (Mika Westerberg).

   - Make two recently added ACPI EC messages look better (Scot Doyle).

   - Reduce the printk level of a recently added debug message related
     to ACPI resources that may become noisy in some cases (Rafael J
     Wysocki).

   - Add a new ACPI backlight blacklist entry for Samsung Series 9
     (900X3C/900X3D/900X3E/900X4C/900X4D) laptops where the native
     backlight interface doesn't work while the ACPI based one does
     (Jens Reyer).

   - Make the PNP sybsystem's core code use __request_region() followed
     by __release_region() instead of __check_region() which then will
     allow us to get rid of the latter as it has no more users (Jakub
     Sitnicki).

   - Fix a build breakage and an issue with two __init functions that
     may be called after initialization in the s3c cpufreq driver (Arnd
     Bergmann).

   - Make the powernv cpuidle driver read target_residency values for
     idle states from a Device Tree (as we have the suitable DT bindings
     for that now) and improve the parsing of the powermgmt DT node in
     that driver (Preeti U Murthy)"

* tag 'pm+acpi-3.20-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpuidle: powernv: Avoid endianness conversions while parsing DT
  cpufreq: s3c: remove last use of resume_clocks callback
  cpufreq: s3c: remove incorrect __init annotations
  ACPI / LPSS: Deassert resets for SPI host controllers on Braswell
  ACPI / LPSS: Always disable I2C host controllers
  ACPI / resources: Change pr_info() to pr_debug() for debug information
  ACPI / video: Disable native backlight on Samsung Series 9 laptops
  cpuidle: powernv: Read target_residency value of idle states from DT if available
  Revert "ACPI / LPSS: Remove non-existing clock control from Intel Lynxpoint I2C"
  ACPI / EC: Remove non-standard log emphasis
  PNP: Switch from __check_region() to __request_region()