Skip to content

L
linux
Switch branch/tag
  1. 07 Jan, 2012 1 commit
  3. 21 Dec, 2011 16 commits
    • Tejun Heo's avatar
      tracing: Factorize filter creation · 38b78eb8
      Tejun Heo authored 
      There are four places where new filter for a given filter string is
created, which involves several different steps.  This patch factors
those steps into create_[system_]filter() functions which in turn make
use of create_filter_{start|finish}() for common parts.

The only functional change is that if replace_filter_string() is
requested and fails, creation fails without any side effect instead of
being ignored.

Note that system filter is now installed after the processing is
complete which makes freeing before and then restoring filter string
on error unncessary.

-v2: Rebased to resolve conflict with 49aa2951 and updated both
     create_filter() functions to always set *filterp instead of
     requiring the caller to clear it to %NULL on entry.

Link: http://lkml.kernel.org/r/1323988305-1469-2-git-send-email-tj@kernel.orgSigned-off-by: default avatarTejun Heo <tj@kernel.org>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      38b78eb8
    • Steven Rostedt's avatar
      tracing: Have stack tracing set filtered functions at boot · 762e1207
      Steven Rostedt authored 
      Add stacktrace_filter= to the kernel command line that lets
the user pick specific functions to check the stack on.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      762e1207
    • Steven Rostedt's avatar
      ftrace: Allow access to the boot time function enabling · 2a85a37f
      Steven Rostedt authored 
      Change set_ftrace_early_filter() to ftrace_set_early_filter()
and make it a global function. This will allow other subsystems
in the kernel to be able to enable function tracing at start
up and reuse the ftrace function parsing code.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      2a85a37f
    • Steven Rostedt's avatar
      tracing: Have stack_tracer use a separate list of functions · d2d45c7a
      Steven Rostedt authored 
      The stack_tracer is used to look at every function and check
if the current stack is bigger than the last recorded max stack size.
When a new max is found, then it saves that stack off.

Currently the stack tracer is limited by the global_ops of
the function tracer. As the stack tracer has nothing to do with
the ftrace function tracer, except that it uses it as its internal
engine, the stack tracer should have its own list.

A new file is added to the tracing debugfs directory called:

  stack_trace_filter

that can be used to select which functions you want to check the stack
on.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      d2d45c7a
    • Steven Rostedt's avatar
      ftrace: Decouple hash items from showing filtered functions · 69a3083c
      Steven Rostedt authored 
      The set_ftrace_filter shows "hashed" functions, which are functions
that are added with operations to them (like traceon and traceoff).

As other subsystems may be able to show what functions they are
using for function tracing, the hash items should no longer
be shown just because the FILTER flag is set. As they have nothing
to do with other subsystems filters.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      69a3083c
    • Steven Rostedt's avatar
      ftrace: Allow other users of function tracing to use the output listing · fc13cb0c
      Steven Rostedt authored 
      The function tracer is set up to allow any other subsystem (like perf)
to use it. Ftrace already has a way to list what functions are enabled
by the global_ops. It would be very helpful to let other users of
the function tracer to be able to use the same code.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      fc13cb0c
    • Steven Rostedt's avatar
      ftrace: Create ftrace_hash_empty() helper routine · 06a51d93
      Steven Rostedt authored 
      There are two types of hashes in the ftrace_ops; one type
is the filter_hash and the other is the notrace_hash. Either
one may be null, meaning it has no elements. But when elements
are added, the hash is allocated.

Throughout the code, a check needs to be made to see if a hash
exists or the hash has elements, but the check if the hash exists
is usually missing causing the possible "NULL pointer dereference bug".

Add a helper routine called "ftrace_hash_empty()" that returns
true if the hash doesn't exist or its count is zero. As they mean
the same thing.
Last-bug-reported-by: default avatarJiri Olsa <jolsa@redhat.com>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      06a51d93
    • Steven Rostedt's avatar
      ftrace: Fix ftrace hash record update with notrace · c842e975
      Steven Rostedt authored 
      When disabling the "notrace" records, that means we want to trace them.
If the notrace_hash is zero, it means that we want to trace all
records. But to disable a zero notrace_hash means nothing.

The check for the notrace_hash count was incorrect with:

	if (hash && !hash->count)
		return

With the correct comment above it that states that we do nothing
if the notrace_hash has zero count. But !hash also means that
the notrace hash has zero count. I think this was done to
protect against dereferencing NULL. But if !hash is true, then
we go through the following loop without doing a single thing.

Fix it to:

	if (!hash || !hash->count)
		return;
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      c842e975
    • Steven Rostedt's avatar
      ftrace: Use bsearch to find record ip · 5855fead
      Steven Rostedt authored 
      Now that each set of pages in the function list are sorted by
ip, we can use bsearch to find a record within each set of pages.
This speeds up the ftrace_location() function by magnitudes.

For archs (like x86) that need to add a breakpoint at every function
that will be converted from a nop to a callback and vice versa,
the breakpoint callback needs to know if the breakpoint was for
ftrace or not. It requires finding the breakpoint ip within the
records. Doing a linear search is extremely inefficient. It is
a must to be able to do a fast binary search to find these locations.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      5855fead
    • Steven Rostedt's avatar
      ftrace: Sort the mcount records on each page · 68950619
      Steven Rostedt authored 
      Sort records by ip locations of the ftrace mcount calls on each of the
set of pages in the function list. This helps in localizing cache
usuage when updating the function locations, as well as gives us
the ability to quickly find an ip location in the list.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      68950619
    • Steven Rostedt's avatar
      ftrace: Replace record newlist with record page list · 85ae32ae
      Steven Rostedt authored 
      As new functions come in to be initalized from mcount to nop,
they are done by groups of pages. Whether it is the core kernel
or a module. There's no need to keep track of these on a per record
basis.

At startup, and as any module is loaded, the functions to be
traced are stored in a group of pages and added to the function
list at the end. We just need to keep a pointer to the first
page of the list that was added, and use that to know where to
start on the list for initializing functions.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      85ae32ae
    • Steven Rostedt's avatar
      ftrace: Allocate the mcount record pages as groups · a7900875
      Steven Rostedt authored 
      Allocate the mcount record pages as a group of pages as big
as can be allocated and waste no more than a single page.

Grouping the mcount pages as much as possible helps with cache
locality, as we do not need to redirect with descriptors as we
cross from page to page. It also allows us to do more with the
records later on (sort them with bigger benefits).
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      a7900875
    • Steven Rostedt's avatar
      ftrace: Remove usage of "freed" records · 32082309
      Steven Rostedt authored 
      Records that are added to the function trace table are
permanently there, except for modules. By separating out the
modules to their own pages that can be freed in one shot
we can remove the "freed" flag and simplify some of the record
management.

Another benefit of doing this is that we can also move the
records around; sort them.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      32082309
    • Steven Rostedt's avatar
      ftrace: Allow archs to modify code without stop machine · c88fd863
      Steven Rostedt authored 
      The stop machine method to modify all functions in the kernel
(some 20,000 of them) is the safest way to do so across all archs.
But some archs may not need this big hammer approach to modify code
on SMP machines, and can simply just update the code it needs.

Adding a weak function arch_ftrace_update_code() that now does the
stop machine, will also let any arch override this method.

If the arch needs to check the system and then decide if it can
avoid stop machine, it can still call ftrace_run_stop_machine() to
use the old method.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      c88fd863
    • Steven Rostedt's avatar
      ftrace: Do not function trace inlined functions · 45959ee7
      Steven Rostedt authored 
      When gcc inlines a function, it does not mark it with the mcount
prologue, which in turn means that inlined functions are not traced
by the function tracer. But if CONFIG_OPTIMIZE_INLINING is set, then
gcc is allowed not to inline a function that is marked inline.

Depending on the options and the compiler, a function may or may
not be traced by the function tracer, depending on whether gcc
decides to inline a function or not. This has caused several
problems in the pass becaues gcc is not always consistent with
what it decides to inline between different gcc versions.

Some places should not be traced (like paravirt native_* functions)
and these are mostly marked as inline. When gcc decides not to
inline the function, and if that function should not be traced, then
the ftrace function tracer will suddenly break when it use to work
fine. This becomes even harder to debug when different versions of
gcc will not inline that function, making the same kernel and config
work for some gcc versions and not work for others.

By making all functions marked inline to not be traced will remove
the ambiguity that gcc adds when it comes to tracing functions marked
inline. All gcc versions will be consistent with what functions are
traced and having volatile working code will be removed.

Note, only the inline macro when CONFIG_OPTIMIZE_INLINING is set needs
to have notrace added, as the attribute __always_inline will force
the function to be inlined and then not traced.
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      45959ee7
    • Jiri Olsa's avatar
      ftrace: Fix unregister ftrace_ops accounting · 30fb6aa7
      Jiri Olsa authored 
      Multiple users of the function tracer can register their functions
with the ftrace_ops structure. The accounting within ftrace will
update the counter on each function record that is being traced.
When the ftrace_ops filtering adds or removes functions, the
function records will be updated accordingly if the ftrace_ops is
still registered.

When a ftrace_ops is removed, the counter of the function records,
that the ftrace_ops traces, are decremented. When they reach zero
the functions that they represent are modified to stop calling the
mcount code.

When changes are made, the code is updated via stop_machine() with
a command passed to the function to tell it what to do. There is an
ENABLE and DISABLE command that tells the called function to enable
or disable the functions. But the ENABLE is really a misnomer as it
should just update the records, as records that have been enabled
and now have a count of zero should be disabled.

The DISABLE command is used to disable all functions regardless of
their counter values. This is the big off switch and is not the
complement of the ENABLE command.

To make matters worse, when a ftrace_ops is unregistered and there
is another ftrace_ops registered, neither the DISABLE nor the
ENABLE command are set when calling into the stop_machine() function
and the records will not be updated to match their counter. A command
is passed to that function that will update the mcount code to call
the registered callback directly if it is the only one left. This
means that the ftrace_ops that is still registered will have its callback
called by all functions that have been set for it as well as the ftrace_ops
that was just unregistered.

Here's a way to trigger this bug. Compile the kernel with
CONFIG_FUNCTION_PROFILER set and with CONFIG_FUNCTION_GRAPH not set:

 CONFIG_FUNCTION_PROFILER=y
 # CONFIG_FUNCTION_GRAPH is not set

This will force the function profiler to use the function tracer instead
of the function graph tracer.

  # cd /sys/kernel/debug/tracing
  # echo schedule > set_ftrace_filter
  # echo function > current_tracer
  # cat set_ftrace_filter
 schedule
  # cat trace
 # tracer: nop
 #
 # entries-in-buffer/entries-written: 692/68108025   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
      kworker/0:2-909   [000] ....   531.235574: schedule <-worker_thread
           <idle>-0     [001] .N..   531.235575: schedule <-cpu_idle
      kworker/0:2-909   [000] ....   531.235597: schedule <-worker_thread
             sshd-2563  [001] ....   531.235647: schedule <-schedule_hrtimeout_range_clock

  # echo 1 > function_profile_enabled
  # echo 0 > function_porfile_enabled
  # cat set_ftrace_filter
 schedule
  # cat trace
 # tracer: function
 #
 # entries-in-buffer/entries-written: 159701/118821262   #P:4
 #
 #                              _-----=> irqs-off
 #                             / _----=> need-resched
 #                            | / _---=> hardirq/softirq
 #                            || / _--=> preempt-depth
 #                            ||| /     delay
 #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
 #              | |       |   ||||       |         |
           <idle>-0     [002] ...1   604.870655: local_touch_nmi <-cpu_idle
           <idle>-0     [002] d..1   604.870655: enter_idle <-cpu_idle
           <idle>-0     [002] d..1   604.870656: atomic_notifier_call_chain <-enter_idle
           <idle>-0     [002] d..1   604.870656: __atomic_notifier_call_chain <-atomic_notifier_call_chain

The same problem could have happened with the trace_probe_ops,
but they are modified with the set_frace_filter file which does the
update at closure of the file.

The simple solution is to change ENABLE to UPDATE and call it every
time an ftrace_ops is unregistered.

Link: http://lkml.kernel.org/r/1323105776-26961-3-git-send-email-jolsa@redhat.com

Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: default avatarJiri Olsa <jolsa@redhat.com>
Signed-off-by: default avatarSteven Rostedt <rostedt@goodmis.org>
      30fb6aa7
  5. 12 Dec, 2011 3 commits
  7. 06 Dec, 2011 14 commits
  9. 05 Dec, 2011 6 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7