When the user submits more than 32 work request to a srq queue
at a time, it needs to find the corresponding number of entries
in the bitmap in the idx queue. However, the original lookup
function named ffs only processes 32 bits of the array element,
When the number of srq wqe issued exceeds 32, the ffs will only
process the lower 32 bits of the elements, it will not be able
to get the correct wqe index for srq wqe.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

If the kzalloc() fails then we should return ERR_PTR(-ENOMEM).  In the
current code it's possible that the kzalloc() fails and the
radix_tree_insert() inserts the NULL pointer successfully and we return
the NULL "elm" pointer to the caller.  That results in a NULL pointer
dereference.

Fixes: 9ed3e5f4 ("IB/uverbs: Build the specs into a radix tree at runtime")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace the following form:

sizeof(struct opa_port_status_rsp) + num_vls * sizeof(struct _vls_pctrs)

with:

struct_size(rsp, vls, num_vls)

and so on...

Also, notice that variable size is unnecessary, hence it is removed.

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace the following form:

sizeof(*pkt) + sizeof(pkt->addr[0])*n

with:

struct_size(pkt, addr, n)

Also, notice that variable size is unnecessary, hence it is removed.

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace the following form:

sizeof(struct rvt_sge) * init_attr->cap.max_send_sge + sizeof(struct rvt_swqe)

with:

struct_size(swq, sg_list, init_attr->cap.max_send_sge)

and so on...

Also, notice that variable size is unnecessary, hence it is removed.

This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Remove leftover includes that are no longer used from the driver.
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When creating the chunks list the rdma_for_each_block() iterator is used
in order to iterate over the payload in EFA_CHUNK_PAYLOAD_SIZE (device
defined) strides.
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The admin commands abort flow is buggy (use-after-free) and not really
necessary as it is guaranteed that after ib_unregister_device() is called
there are no user verbs threads running in parallel, delete it.
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Use kvzalloc which attempts to allocate a physically continuous buffer and
fallbacks to virtually continuous on failure instead of open coding it in
the driver.

The is_vmalloc_addr function is used to determine whether the buffer is
physically continuous or not (which determines direct vs indirect MR
registration mode).
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

A recent patch to hfi1 left behind a checkpatch error.

Fixes: fb24ea52 ("drivers: Remove explicit invocations of mmiowb()")
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

For infiniband code that retains pages via get_user_pages*(), release
those pages via the new put_user_page(), or put_user_pages*(), instead of
put_page()

This is a tiny part of the second step of fixing the problem described in
[1]. The steps are:

1) Provide put_user_page*() routines, intended to be used for releasing
   pages that were pinned via get_user_pages*().

2) Convert all of the call sites for get_user_pages*(), to invoke
   put_user_page*(), instead of put_page(). This involves dozens of call
   sites, and will take some time.

3) After (2) is complete, use get_user_pages*() and put_user_page*() to
   implement tracking of these pages. This tracking will be separate from
   the existing struct page refcounting.

4) Use the tracking and identification of these pages, to implement
   special handling (especially in writeback paths) when the pages are
   backed by a filesystem. Again, [1] provides details as to why that is
   desirable.

[1] https://lwn.net/Articles/753027/ : "The Trouble with get_user_pages()"
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jérôme Glisse <jglisse@redhat.com>
Acked-by: Jason Gunthorpe <jgg@mellanox.com>
Tested-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/hfi1/tid_rdma.c: In function tid_rdma_rcv_error:
drivers/infiniband/hw/hfi1/tid_rdma.c:2029:7: warning: variable offset set but not used [-Wunused-but-set-variable]
drivers/infiniband/hw/hfi1/tid_rdma.c: In function hfi1_rc_rcv_tid_rdma_ack:
drivers/infiniband/hw/hfi1/tid_rdma.c:4555:35: warning: variable fspsn set but not used [-Wunused-but-set-variable]

'offset' is never used since introduction in
commit d0d564a1 ("IB/hfi1: Add functions to receive TID RDMA READ request")

'fspsn' is never used since introduciotn in
commit 9e93e967 ("IB/hfi1: Add a function to receive TID RDMA ACK packet")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This patch makes the code more readable by removing magic numbers.
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

In some functions, the jiffies operation is unnecessary, and we can
control delay using mdelay and udelay functions only.  Especially, in
hns_roce_v1_clear_hem, the function calls spin_lock_irqsave, the context
disables interrupt, so we can not use jiffies and msleep functions.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

When hip08 set gid, it will call spin_unlock_bh when send cmq.  if main.ko
call spin_lock_irqsave firstly, and the kernel is before commit
f71b74bc ("irq/softirqs: Use lockdep to assert IRQs are
disabled/enabled"), it will cause WARN_ON_ONCE because of calling
spin_unlock_bh in disable context.

In fact, the spin_lock_irqsave in main.ko is only used for hip06, and
should be placed in hns_roce_hw_v1.c. hns_roce_hw_v2.c uses its own
spin_unlock_bh and does not need main.ko manage spin_lock.
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

According to hip08 UM, the maximum number of CQEs supported by each CQ is
4M.
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

There is no need to print when communication is established, especially
while lots of qp used by application.
Signed-off-by: Yixian Liu <liuyixian@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Add await in destroy_qp() so that all references to qp are dereferenced
and qp is freed in destroy_qp() itself.  This ensures freeing of all QPs
before invocation of dealloc_ucontext(), which prevents loss of in use
qpids stored in the ucontext.
Signed-off-by: Nirranjan Kirubaharan <nirranjan@chelsio.com>
Reviewed-by: Potnuri Bharat Teja <bharat@chelsio.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Change unconditional print of DMA address to be printed with special
printk format type specifier.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Convert various sizeof call sites to be written in standard format
sizeof().
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Resize CQ implementation was guarded by undeclared "notyet" define while
cxgb3 was added to the kernel. Twelve years later, this call is still
unimplemented, so safely delete it and fix improper return error code when
.resize_cq() is not implemented.

Fixes: b038ced7 ("RDMA/cxgb3: Add driver for Chelsio T3 RNIC")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

DMA addresses like all other kernel addresses should be printed with
special %p* formatter. It is needed to allow control of exposure of such
information through a dedicated knob.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

sizeof(a), sizeof a and sizeof (a) are all valid notations, but first is
more readable format recommended by checkpatch.pl.

Let's canonize it in cxgb3 drivers, so latter patches won't emit
checkpatch warnings. As part of this change, a redundant memset() was
removed.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Drivers cannot check the udata for validity when doing destroy as there
will be no way to report this error back to the uverbs.

Since udata is new for destroy no driver should start to use it - instead
drivers should opt for the ioctl interface and define it in a way where it
cannot fail due to incorrect data.

Remove the checks on udata construction so EFA is consistent with
everything else.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The same wait queue is initialized a couple of lines above.

Fixes: 3c2d774c ("RDMA/nes: Add a driver for NetEffect RNICs")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

There is no need to check existence of structures to be destroyed.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The destroy functions are always called with relevant structs, there is no
need to check their existence.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Kernel destroy CQ flows can't fail and the returned value of
ib_destroy_cq() is not interested in those flows.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

There are nothing to do from user side with knowledge that destroy CQ
fails.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

There is no value in checking ib_destroy_cq() result and skipping to clear
struct ic fields. This connection needs to be reinitialized anyway.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The return value from ib_device_check_mandatory() is always 0 - change it
to be void.
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The function argument virt_addr is not in use - delete it.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

This value has always been set to PAGE_SHIFT in the core code, the only
thing that does differently was the ODP path. Move the value into the ODP
struct and still use it for ODP, but change all the non-ODP things to just
use PAGE_SHIFT/PAGE_SIZE/PAGE_MASK directly.
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

Use the correct enum value introduced in commit 12113a35 ("IB/core:
Add HDR speed enum") Prior to this change a 50Gbps port would show 40Gbps.

This patch also cleaned up the redundant redefiniton of ib speeds for
qedr.

Fixes: 12113a35 ("IB/core: Add HDR speed enum")
Signed-off-by: Sagiv Ozeri <sagiv.ozeri@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Use the correct function names.

Fixes: c4367a26 ("IB: Pass uverbs_attr_bundle down ib_x destroy path")
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Print the supported and wanted values for SG count during signature
operation.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

A wrong value was printed in case of sig MR pool initialization failure.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Use the correct function name.
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>