- 31 Mar, 2010 15 commits
-
-
Alex Deucher authored
- remove a few more drm only regs - remove sampler, alu, bool, loop constant regs. They are set via separate packet3's already Signed-off-by:
Alex Deucher <alexdeucher@gmail.com> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
- Drop some more safe regs taht userspace shouldn't hit - Constant base regs need relocs. This allows us to use constant buffers rather than the constant register file. Also we don't want userspace to be able to set arbitrary mc base values for the const caches. - Track SQ_CONFIG so we know whether userspace is using the cfile or constant buffers. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
Only the drm should be touching them. Signed-off-by:
-
Chris Wilson authored
Replace a BUG_ON with an error code in the event that the inode mapping changes between calls to drm_open. This may happen for instance if udev is loaded subsequent to the original opening of the device: [ 644.291870] kernel BUG at drivers/gpu/drm/drm_fops.c:146! [ 644.291876] invalid opcode: 0000 [#1] SMP [ 644.291882] last sysfs file: /sys/kernel/uevent_seqnum [ 644.291888] [ 644.291895] Pid: 7276, comm: lt-cairo-test-s Not tainted 2.6.34-rc1 #2 N150/N210/N220 /N150/N210/N220 [ 644.291903] EIP: 0060:[<c11c70e3>] EFLAGS: 00210283 CPU: 0 [ 644.291912] EIP is at drm_open+0x4b1/0x4e2 [ 644.291918] EAX: f72d8d18 EBX: f790a400 ECX: f73176b8 EDX: 00000000 [ 644.291923] ESI: f790a414 EDI: f790a414 EBP: f647ae20 ESP: f647adfc [ 644.291929] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 644.291937] Process lt-cairo-test-s (pid: 7276, ti=f647a000 task=f73f5c80 task.ti=f647a000) [ 644.291941] Stack: [ 644.291945] 00000000 f7bb7400 00000080 f6451100 f73176b8 f6479214 f6451100 f73176b8 [ 644.291957] <0> c1297ce0 f647ae34 c11c6c04 f73176b8 f7949800 00000000 f647ae54 c1080ac5 [ 644.291969] <0> f7949800 f6451100 00000000 f6451100 f73176b8 f6452780 f647ae70 c107d1e6 [ 644.291982] Call Trace: [ 644.291991] [<c11c6c04>] ? drm_stub_open+0x8a/0xb8 [ 644.292000] [<c1080ac5>] ? chrdev_open+0xef/0x106 [ 644.292008] [<c107d1e6>] ? __dentry_open+0xd4/0x1a6 [ 644.292015] [<c107d35b>] ? nameidata_to_filp+0x31/0x45 [ 644.292022] [<c10809d6>] ? chrdev_open+0x0/0x106 [ 644.292030] [<c10864e2>] ? do_last+0x346/0x423 [ 644.292037] [<c108789f>] ? do_filp_open+0x190/0x415 [ 644.292046] [<c1071eb5>] ? handle_mm_fault+0x214/0x710 [ 644.292053] [<c107d008>] ? do_sys_open+0x4d/0xe9 [ 644.292061] [<c1016462>] ? do_page_fault+0x211/0x23f [ 644.292068] [<c107d0f0>] ? sys_open+0x23/0x2b [ 644.292075] [<c1002650>] ? sysenter_do_call+0x12/0x26 [ 644.292079] Code: 89 f0 89 55 dc e8 8d 96 0a 00 8b 45 e0 8b 55 dc 83 78 04 01 75 28 8b 83 18 02 00 00 85 c0 74 0f 8b 4d ec 3b 81 ac 00 00 00 74 13 <0f> 0b eb fe 8b 4d ec 8b 81 ac 00 00 00 89 83 18 02 00 00 89 f0 [ 644.292143] EIP: [<c11c70e3>] drm_open+0x4b1/0x4e2 SS:ESP 0068:f647adfc [ 644.292175] ---[ end trace 2ddd476af89a60fa ]--- Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@kernel.org Signed-off-by:
-
Pauli Nieminen authored
When there is allocation failure in radeon_cs_parser_relocs parser->nrelocs is not cleaned. This causes NULL pointer defeference in radeon_cs_parser_fini when clean up code is trying to loop over the relocation array and free the objects. Fix adds a check for a possible NULL pointer in clean up code. Signed-off-by:
Pauli Nieminen <suokkos@gmail.com> Cc: stable@kernel.org Signed-off-by:
-
Jerome Glisse authored
radeon_gart_fini might call GART unbind callback function which might try to access GART table but if gart_disable is call first the GART table will be unmapped so any access to it will oops. Signed-off-by:
Jerome Glisse <jglisse@redhat.com> Signed-off-by:
-
Dave Airlie authored
We can get this if the user moves the mouse when we are waiting to move some stuff around in the validate. Don't fail. Cc: stable@kernel.org Signed-off-by: -
Alex Deucher authored
Check that atom cmd and data tables are valid before using them. (v2) - fix some whitespace errors noticed by Rafał Miłecki - check a few more cases Signed-off-by:
-
Alex Deucher authored
- no longer needed with the latest new pll algo fixes. - also don't use lcd pll limits. They don't seem to work well for all systems. If we have a case where they are useful, we can set the flag for that case. fixes fdo bug 27083 Signed-off-by:
-
Alex Deucher authored
I missed rs4xx in 7f1e613daf0fdd0884316ab25a749db3c671329e Fixes fdo bug 27219. Signed-off-by:
-
Alex Deucher authored
RS4xx+ IGP chips use an internal gart, however, some of them have the agp cap bits set in their pci configs. Make sure to clear the AGP flag as AGP will not work with them. Should fix fdo bug 27225 Signed-off-by:
-
Alex Deucher authored
- rs780/880 were using the wrong bandwidth functions - convert r1xx-r4xx to use the same pm sclk/mclk structs as r5xx+ - move bandwidth setup to a common function Signed-off-by:
-
- 30 Mar, 2010 5 commits
-
-
Alex Deucher authored
Replace hardcoded numbers with rdev->num_crtc. Signed-off-by:
-
Alex Deucher authored
Signed-off-by:
-
Alex Deucher authored
This fixes some issues with the last gfx init patch. Signed-off-by:
-
Alex Deucher authored
Make sure we have a crtc assigned to the encoder before dereferencing it. Signed-off-by: -
Alex Deucher authored
Look up i2c bus in the power table and expose it. You'll need to load a hwmon driver for any chips on the bus, this patch just exposes the bus. Signed-off-by:
-
- 15 Mar, 2010 20 commits
-
-
Daniel Vetter authored
This just an example to show what radeon_asic.h might be good for. Before Jerome kills it ;) Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Daniel Vetter authored
In essence this creates a home for all asic specific declarations in radeon_asic.h Signed-off-by:
-
Daniel Vetter authored
No one cares about it, so set it to void. Signed-off-by:
-
Daniel Vetter authored
With these static structs gone, radeon_asic.h is a real header file and can be used as such. Signed-off-by:
-
Daniel Vetter authored
And move asic init plus a few related functions from radeon_device.c to it. This file will hold all the asic structures in the future, but atm they're still stuck in radeon_asic.h. Signed-off-by:
-
Dave Airlie authored
* 'radeon-for-airlied' of ../linux-2.6: drm/radeon/kms: prepare for more reclocking operations drm/radeon/kms: switch to condition waiting for reclocking drm/radeon/r600: add missing license and comments to r600_blit_shaders.c drm/radeon/kms: improve coding style a little drm/radeon/kms: remove dead audio/HDMI code drm/radeon/kms: enable audio engine on DCE32 drm/radeon/kms: add HDMI code for pre-DCE3 R6xx GPUs drm/radeon/kms: clean assigning HDMI blocks to encoders drm/radeon/kms: clean HDMI definitions drm/radeon/kms/rs4xx: make sure crtcs are enabled when setting timing drm/radeon/kms/r1xx: enable hw i2c drm/radeon/kms: fix i2c prescale calc on older radeons drm/radeon/kms: fix for hw i2c drm/radeon/kms: fix pal tv-out support on legacy IGP chips drm/radeon/kms: further spread spectrum fixes drm/radeon/kms: use lcd pll limits when available drm/radeon/kms/atom: spread spectrum fix drm/radeon/kms: catch atombios infinite loop and break out of it drm/radeon: add new RS880 pci id
-
Dave Airlie authored
* nouveau/for-airlied: drm/nouveau: add module option to disable TV detection drm/nouveau: Never evict VRAM buffers to system. drm/nv50: fix connector table parsing for some cards drm/nv50: add a memory barrier to pushbuf submission drm/nouveau: print a message very early during suspend drm/nv04-nv40: Fix up the programmed horizontal sync pulse delay. drm/nouveau: Gigabyte NX85T connector table lies, it has DVI-I not HDMI drm/nouveau: add option to allow override of dcb connector table types drm/nv50: Improve PGRAPH interrupt handling. drm/nv50: Make ctxprog wait until interrupt handler is done. drm/nouveau: Fix fbcon corruption with font width not divisible by 8 drm/nv50: Remove redundant/incorrect ctxvals initialisation.
-
Ben Skeggs authored
Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Cc: stable@kernel.org Signed-off-by:
-
Zhao Yakui authored
Now the EDID property will be updated when the corresponding EDID can be obtained from the external display device. But after the external device is plugged-out, the EDID property is not updated. In such case we still get the corresponding EDID property although it is already detected as disconnected. https://bugs.freedesktop.org/show_bug.cgi?id=26743Signed-off-by:
Zhao Yakui <yakui.zhao@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Cc: stable@kernel.org Signed-off-by:
-
Randy Dunlap authored
vmwfgx uses framebuffer interfaces, so it should depend on FB. Otherwise it has these build errors (e.g., when CONFIG_FB=m): drivers/built-in.o: In function `vmw_fb_close': (.text+0x97713): undefined reference to `unregister_framebuffer' drivers/built-in.o: In function `vmw_fb_close': (.text+0x97754): undefined reference to `framebuffer_release' drivers/built-in.o: In function `vmw_fb_init': (.text+0x97e1c): undefined reference to `framebuffer_alloc' drivers/built-in.o: In function `vmw_fb_init': (.text+0x9838d): undefined reference to `register_framebuffer' drivers/built-in.o: In function `vmw_fb_init': (.text+0x9842a): undefined reference to `framebuffer_release' Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
-
Robert P. J. Day authored
Replace sequential calls to kobject_init() and kobject_add() with the combo wrapper kobject_init_and_add(), which provides the same semantics. Signed-off-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
-
Dave Airlie authored
Now that the drm core can do this, lets just use it, split the code out so TTM doesn't have to drag all of drmP.h in. Signed-off-by: -
Rafał Miłecki authored
Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
-
Rafał Miłecki authored
We tried to implement interruptible waiting with timeout (it was broken anyway) which was not a good idea as explained by Andrew. It's possible to avoid using additional variable but actually it inroduces using more complex in-kernel tools. So simply add one variable for condition. Signed-off-by:
-
Alex Deucher authored
R6xx+ cards need to use the 3D engine to blit data which requires quite a bit of hw state setup. Rather than pull the whole 3D driver (which normally generates the 3D state) into the DRM, we opt to use statically generated state tables. The regsiter state and shaders were hand generated to support blitting functionality. See the 3D driver or documentation for descriptions of the registers and shader instructions. Signed-off-by:
-
Rafał Miłecki authored
We still have many magic numbers in HDMI/audio to define Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Signed-off-by:
-
Rafał Miłecki authored
Older GPUs are little different, HDMI blocks are not hard-wired, but routable. We should just find some free HDMI block and route it to choosen encoder. In case of RS6x0 there is only one HDMI block, we don't enable HDMI on RS6x00 yet however. Signed-off-by:
-
Rafał Miłecki authored
We almost always used first HDMI block for first encoder and second for sencod. Exception was KLDSCP_LVTMA. Analyzing code picking DIG encoder shows the same behaviour. It shows HDMI block are related to DIGs, which relation we now use. Signed-off-by:
-
