- 08 Jan, 2009 40 commits
-
-
Alan Cox authored
Correct the DMA bit flags (UDMA and MWDMA were swapped) Add workarounds so that we clear ERR and INTR bits before issuing a DMA Add workarounds so that we stop a live DMA before touching the CTL register Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
Jeff Garzik <jgarzik@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (53 commits) serial: Add driver for the Cell Network Processor serial port NWP device powerpc: enable dynamic ftrace powerpc/cell: Fix the prototype of create_vma_map() powerpc/mm: Make clear_fixmap() actually work powerpc/kdump: Use ppc_save_regs() in crash_setup_regs() powerpc: Export cacheable_memzero as its now used in a driver powerpc: Fix missing semicolons in mmu_decl.h powerpc/pasemi: local_irq_save uses an unsigned long powerpc/cell: Fix some u64 vs. long types powerpc/cell: Use correct types in beat files powerpc: Use correct type in prom_init.c powerpc: Remove unnecessary casts mtd/ps3vram: Use _PAGE_NO_CACHE in memory ioremap mtd/ps3vram: Use msleep in waits mtd/ps3vram: Use proper kernel types mtd/ps3vram: Cleanup ps3vram driver messages mtd/ps3vram: Remove ps3vram debug routines mtd/ps3vram: Add modalias support to the ps3vram driver mtd/ps3vram: Add ps3vram driver for accessing video RAM as MTD powerpc: Fix iseries drivers build failure without CONFIG_VIOPATH ...
-
Coly Li authored
When I review ocfs2 code, find there are 2 typos to "successfull". After doing grep "successfull " in kernel tree, 22 typos found totally -- great minds always think alike :) This patch fixes all the similar typos. Thanks for Randy's ack and comments. Signed-off-by:
Coly Li <coyli@suse.de> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Acked-by:
Roland Dreier <rolandd@cisco.com> Cc: Jeremy Kerr <jk@ozlabs.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Vlad Yasevich <vladislav.yasevich@hp.com> Cc: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Roel Kluin authored
Building an allnoconfig kernel, sparse asked whether these could be static, so I checked, and they are only used in the file where they are declared. Signed-off-by:
Roel Kluin <roel.kluin@gmail.com> Signed-off-by:
-
Wu Fengguang authored
Use the new generic implementation. Signed-off-by:
Wu Fengguang <fengguang.wu@intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Wu Fengguang authored
Use the new generic implementation. Signed-off-by:
Wu Fengguang <wfg@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Wu Fengguang authored
Use the new generic implementation. Signed-off-by:
-
Wu Fengguang authored
Use the new generic implementation. Signed-off-by:
-
Wu Fengguang authored
There have been some local definitions of swap(), it's time to replace them all with a uniform one. Signed-off-by:
-
Wu Fengguang authored
This is to avoid name clashes for the introduction of a global swap() macro. Signed-off-by:
-
Wu Fengguang authored
In preparation for the introduction of a generic swap() macro. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Wu Fengguang authored
In preparation for the introduction of a generic swap() macro. Signed-off-by:
-
Fernando Carrijo authored
Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Acked-by:
Theodore Ts'o <tytso@mit.edu> Acked-by:
Mark Fasheh <mfasheh@suse.com> Acked-by:
Casey Schaufler <casey@schaufler-ca.com> Acked-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
roel kluin authored
romfs_strnlen() returns int unsigned X >= 0 is always true [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Magnus Damm authored
Remove the saved_max_pfn check from the /proc/vmcore function read_from_oldmem(). No need to verify, we should be able to just trust that "elfcorehdr=" is correctly passed to the crash kernel on the kernel command line like we do with other parameters. The read_from_oldmem() function in fs/proc/vmcore.c is quite similar to read_from_oldmem() in drivers/char/mem.c, but only in the latter it makes sense to use saved_max_pfn. For oldmem it is used to determine when to stop reading. For vmcore we already have the elf header info pointing out the physical memory regions, no need to pass the end-of- old-memory twice. Removing the saved_max_pfn check from vmcore makes it possible for architectures to skip oldmem but still support crash dump through vmcore - without the need for the old saved_max_pfn cruft. Architectures that want to play safe can do the saved_max_pfn check in copy_oldmem_page(). Not sure why anyone would want to do that, but that's even safer than today - the saved_max_pfn check in vmcore removed by this patch only checks the first page. Signed-off-by:
Magnus Damm <damm@igel.co.jp> Acked-by:
Vivek Goyal <vgoyal@redhat.com> Acked-by:
Simon Horman <horms@verge.net.au> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Evgeniy Polyakov authored
Send completion status of the commands to the userspace. Message and protocol are described in the documentation. Signed-off-by:
Evgeniy Polyakov <zbr@ioremap.net> Cc: Paul Alfille <paul.alfille@gmail.com> Signed-off-by:
-
Evgeniy Polyakov authored
Command which allows to reset the bus. Signed-off-by:
-
Evgeniy Polyakov authored
Signed-off-by:
-
Evgeniy Polyakov authored
This small patchset extendes existing commands with reset, master IO and status messages. Reset is used to reset the bus for given master device, master IO command allows to initiate IO against bus itself not selecting slave device first, which can be used to probe the device for example. And status messages carry command completion status back to the userspace (namely very useful to get -ENODEV from when requested device was not found). Great thanks to Paul Alfille of OWFS for testing and commands suggestions. This patch: Allow starting of IO not against already found slave devices, but against the bus itself, which can be used for example to probe devices. [akpm@linux-foundation.org: reindent switch statements] Signed-off-by:
-
Evgeniy Polyakov authored
Signed-off-by:
-
Evgeniy Polyakov authored
Initiates search (or alarm search) and returns all found devices to userspace. Found devices are not added into the system (i.e. they are not attached to family devices or bus masters), it will be done via (if was not done yet) usual timed searching. Signed-off-by:
-
Evgeniy Polyakov authored
Writes and returns sampled data back to userspace. Signed-off-by:
-
Evgeniy Polyakov authored
This patch series introduces and extends several userspace commands used with netlink protocol. Touch block command allows to write data and return sampled data to the userspace. Extended search and alarm seach commands to return list of slave devices found during given search. List masters command allows to send all registered master IDs to the userspace. Great thanks to Paul Alfille (owfs) who tested this implementation and wrote w1-to-network daemon http://sourceforge.net/projects/w1repeater/ and Frederik Deweerdt and Randy Dunlap for review. This patch: Returns list of registered bus master devices. Signed-off-by:
-
Sascha Hauer authored
This patch adds support for the 1-wire master interface for i.MX27 and i.MX31. Signed-off-by:
Luotao Fu <l.fu@pengutronix.de> Signed-off-by:
Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by:
-
David Smith authored
Signed-off-by:
Marcel Selhorst <tpm@selhorst.net> Signed-off-by:
-
Matthew Garrett authored
Add a driver for controlling Dell-specific backlight and rfkill interfaces. This driver makes use of the dcdbas interface to the Dell firmware to allow the backlight and rfkill interfaces on Dell systems to be driven through the standardised sysfs interfaces. Signed-off-by:
Matthew Garrett <mjg@redhat.com> Cc: Matt Domsch <Matt_Domsch@dell.com> Cc: Ivo van Doorn <ivdoorn@gmail.com> Cc: Len Brown <lenb@kernel.org> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by:
-
Matthew Garrett authored
The dcdbas code allows calls to be made into the firmware on Dell systems. Exporting this to other drivers allows them to implement Dell-specific functionality in a safe way. Signed-off-by:
-
Kees Cook authored
While discussing[1] the need for glibc to have access to random bytes during program load, it seems that an earlier attempt to implement AT_RANDOM got stalled. This implements a random 16 byte string, available to every ELF program via a new auxv AT_RANDOM vector. [1] http://sourceware.org/ml/libc-alpha/2008-10/msg00006.html Ulrich said: glibc needs right after startup a bit of random data for internal protections (stack canary etc). What is now in upstream glibc is that we always unconditionally open /dev/urandom, read some data, and use it. For every process startup. That's slow. ... The solution is to provide a limited amount of random data to the starting process in the aux vector. I suggested 16 bytes and this is what the patch implements. If we need only 16 bytes or less we use the data directly. If we need more we'll use the 16 bytes to see a PRNG. This avoids the costly /dev/urandom use and it allows the kernel to use the most adequate source of random data for this purpose. It might not be the same pool as that for /dev/urandom. Concerns were expressed about the depletion of the randomness pool. But this patch doesn't make the situation worse, it doesn't deplete entropy more than happens now. Signed-off-by:
Kees Cook <kees.cook@canonical.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by:
-
Sukadev Bhattiprolu authored
If a process registers for asynchronous notification on a POSIX message queue, it gets a signal and a siginfo_t structure when a message arrives on the message queue. The si_pid in the siginfo_t structure is set to the PID of the process that sent the message to the message queue. The principle is the following: . when mq_notify(SIGEV_SIGNAL) is called, the caller registers for notification when a msg arrives. The associated pid structure is stroed into inode_info->notify_owner. Let's call this process P1. . when mq_send() is called by say P2, P2 sends a signal to P1 to notify him about msg arrival. The way .si_pid is set today is not correct, since it doesn't take into account the fact that the process that is sending the message might not be in the same namespace as the notified one. This patch proposes to set si_pid to the sender's pid into the notify_owner namespace. Signed-off-by:
Nadia Derbey <Nadia.Derbey@bull.net> Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Roland McGrath <roland@redhat.com> Cc: Bastian Blank <bastian@waldi.eu.org> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Acked-by:
Serge Hallyn <serue@us.ibm.com> Signed-off-by:
-
Eric W. Biederman authored
Currently task_active_pid_ns is not safe to call after a task becomes a zombie and exit_task_namespaces is called, as nsproxy becomes NULL. By reading the pid namespace from the pid of the task we can trivially solve this problem at the cost of one extra memory read in what should be the same cacheline as we read the namespace from. When moving things around I have made task_active_pid_ns out of line because keeping it in pid_namespace.h would require adding includes of pid.h and sched.h that I don't think we want. This change does make task_active_pid_ns unsafe to call during copy_process until we attach a pid on the task_struct which seems to be a reasonable trade off. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Eric W. Biederman authored
A current problem with the pid namespace is that it is easy to do pid related work after exit_task_namespaces which drops the nsproxy pointer. However if we are doing pid namespace related work we are always operating on some struct pid which retains the pid_namespace pointer of the pid namespace it was allocated in. So provide ns_of_pid which allows us to find the pid namespace a pid was allocated in. Using this we have the needed infrastructure to do pid namespace related work at anytime we have a struct pid, removing the chance of accidentally having a NULL pointer dereference when accessing current->nsproxy. Signed-off-by:
-
Li Zefan authored
Impact: cleanups, use new cpumask API Final trivial cleanups: mainly s/cpumask_t/struct cpumask Note there is a FIXME in generate_sched_domains(). A future patch will change struct cpumask *doms to struct cpumask *doms[]. (I suppose Rusty will do this.) Signed-off-by:
Li Zefan <lizf@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Acked-by:
Mike Travis <travis@sgi.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Li Zefan authored
Impact: use new cpumask API This patch mainly does the following things: - change cs->cpus_allowed from cpumask_t to cpumask_var_t - call alloc_bootmem_cpumask_var() for top_cpuset in cpuset_init_early() - call alloc_cpumask_var() for other cpusets - replace cpus_xxx() to cpumask_xxx() Signed-off-by:
-
Li Zefan authored
Impact: cleanups, reduce stack usage This patch prepares for the next patch. When we convert cpuset.cpus_allowed to cpumask_var_t, (trialcs = *cs) no longer works. Another result of this patch is reducing stack usage of trialcs. sizeof(*cs) can be as large as 148 bytes on x86_64, so it's really not good to have it on stack. Signed-off-by:
-
Li Zefan authored
Impact: reduce stack usage Allocate a global cpumask_var_t at boot, and use it in cpuset_attach(), so we won't fail cpuset_attach(). Signed-off-by:
-
Li Zefan authored
Impact: reduce stack usage Just use cs->cpus_allowed, and no need to allocate a cpumask_var_t. Signed-off-by:
Li Zefan <lizf@cn.fujistu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Rusty Russell <rusty@rustcorp.com.au> Acked-by:
-
Li Zefan authored
This patchset converts cpuset to use new cpumask API, and thus remove on stack cpumask_t to reduce stack usage. Before: # cat kernel/cpuset.c include/linux/cpuset.h | grep -c cpumask_t 21 After: # cat kernel/cpuset.c include/linux/cpuset.h | grep -c cpumask_t 0 This patch: Impact: reduce stack usage It's safe to call cpulist_scnprintf inside callback_mutex, and thus we can just remove the cpumask_t and no need to allocate a cpumask_var_t. Signed-off-by:
-
Miao Xie authored
I found a bug on my dual-cpu box. I created a sub cpuset in top cpuset and assign 1 to its cpus. And then we attach some tasks into this sub cpuset. After this, we offline CPU1. Now, the tasks in this new cpuset are moved into top cpuset automatically because there is no cpu in sub cpuset. Then we online CPU1, we find all the tasks which doesn't belong to top cpuset originally just run on CPU0. We fix this bug by setting task's cpu_allowed to cpu_possible_map when attaching it into top cpuset. This method needn't modify the current behavior of cpusets on CPU hotplug, and all of tasks in top cpuset use cpu_possible_map to initialize their cpu_allowed. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Cc: Paul Menage <menage@google.com> Signed-off-by:
-
Lai Jiangshan authored
task_cs() calls task_subsys_state(). We must use rcu_read_lock() to protect cgroup_subsys_state(). It's correct that top_cpuset is never freed, but cgroup_subsys_state() accesses css_set, this css_set maybe freed when task_cs() called. We use use rcu_read_lock() to protect it. Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by:
Paul Menage <menage@google.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
Paul Menage authored
Add css_tryget(), that obtains a counted reference on a CSS. It is used in situations where the caller has a "weak" reference to the CSS, i.e. one that does not protect the cgroup from removal via a reference count, but would instead be cleaned up by a destroy() callback. css_tryget() will return true on success, or false if the cgroup is being removed. This is similar to Kamezawa Hiroyuki's patch from a week or two ago, but with the difference that in the event of css_tryget() racing with a cgroup_rmdir(), css_tryget() will only return false if the cgroup really does get removed. This implementation is done by biasing css->refcnt, so that a refcnt of 1 means "releasable" and 0 means "released or releasing". In the event of a race, css_tryget() distinguishes between "released" and "releasing" by checking for the CSS_REMOVED flag in css->flags. Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Li Zefan <lizf@cn.fujitsu.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
