nfs_file_direct_write only updates the inode size if it succeeded and
returned the number of bytes written.  But in the AIO case nfs_direct_wait
turns the return value into -EIOCBQUEUED and we skip the size update.

Instead the aio completion path should updated it, which this patch
does.  The implementation is a little hacky because there is no obvious
way to find out we are called for a write in nfs_direct_complete.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Don't check for -NFS4ERR_NOTSUPP, it's already been mapped to -ENOTSUPP
by nfs4_stat_to_errno.

This allows the client to mount v4.1 servers that don't support
SECINFO_NO_NAME by falling back to the "guess and check" method of
nfs4_find_root_sec.
Signed-off-by: Weston Andros Adamson <dros@primarydata.com>
Cc: stable@vger.kernel.org # 3.1+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

nfs4_write_inode() must not be allowed to exit until the layoutcommit
is done. That means that both NFS_INO_LAYOUTCOMMIT and
NFS_INO_LAYOUTCOMMITTING have to be cleared.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

If a LAYOUTCOMMIT is outstanding, then chances are that the metadata
server may still be returning incorrect values for the change attribute,
ctime, mtime and/or size.
Just ignore those attributes for now, and wait for the LAYOUTCOMMIT
rpc call to finish.
Reported-by: shaobingqing <shaobingqing@bwstor.com.cn>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Toralf Förster <toralf.foerster@gmx.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

A fileid in NFS is a uint64. There are some occurrences where dprintk()
outputs a signed fileid. This leads to confusion and more difficult to
read debugging (negative fileids matching positive inode numbers).
Signed-off-by: Niels de Vos <ndevos@redhat.com>
CC: Santosh Pradhan <spradhan@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

The correct way to check on IPV6_ADDR_SCOPE_LINKLOCAL is to check with
the ipv6_addr_src_scope function.

Currently this can't be work, because ipv6_addr_scope returns a int with
a mask of IPV6_ADDR_SCOPE_MASK (0x00f0U) and IPV6_ADDR_SCOPE_LINKLOCAL
is 0x02. So the condition is always false.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

When a task enters call_refreshresult with status 0 from call_refresh and
!rpcauth_uptodatecred(task) it enters call_refresh again with no rate-limiting
or max number of retries.

Instead of trying forever, make use of the retry path that other errors use.

This only seems to be possible when the crrefresh callback is gss_refresh_null,
which only happens when destroying the context.

To reproduce:

1) mount with sec=krb5 (or sec=sys with krb5 negotiated for non FSID specific
   operations).

2) reboot - the client will be stuck and will need to be hard rebooted

BUG: soft lockup - CPU#0 stuck for 22s! [kworker/0:2:46]
Modules linked in: rpcsec_gss_krb5 nfsv4 nfs fscache ppdev crc32c_intel aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd serio_raw i2c_piix4 i2c_core e1000 parport_pc parport shpchp nfsd auth_rpcgss oid_registry exportfs nfs_acl lockd sunrpc autofs4 mptspi scsi_transport_spi mptscsih mptbase ata_generic floppy
irq event stamp: 195724
hardirqs last  enabled at (195723): [<ffffffff814a925c>] restore_args+0x0/0x30
hardirqs last disabled at (195724): [<ffffffff814b0a6a>] apic_timer_interrupt+0x6a/0x80
softirqs last  enabled at (195722): [<ffffffff8103f583>] __do_softirq+0x1df/0x276
softirqs last disabled at (195717): [<ffffffff8103f852>] irq_exit+0x53/0x9a
CPU: 0 PID: 46 Comm: kworker/0:2 Not tainted 3.13.0-rc3-branch-dros_testing+ #4
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 07/31/2013
Workqueue: rpciod rpc_async_schedule [sunrpc]
task: ffff8800799c4260 ti: ffff880079002000 task.ti: ffff880079002000
RIP: 0010:[<ffffffffa0064fd4>]  [<ffffffffa0064fd4>] __rpc_execute+0x8a/0x362 [sunrpc]
RSP: 0018:ffff880079003d18  EFLAGS: 00000246
RAX: 0000000000000005 RBX: 0000000000000007 RCX: 0000000000000007
RDX: 0000000000000007 RSI: ffff88007aecbae8 RDI: ffff8800783d8900
RBP: ffff880079003d78 R08: ffff88006e30e9f8 R09: ffffffffa005a3d7
R10: ffff88006e30e7b0 R11: ffff8800783d8900 R12: ffffffffa006675e
R13: ffff880079003ce8 R14: ffff88006e30e7b0 R15: ffff8800783d8900
FS:  0000000000000000(0000) GS:ffff88007f200000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f3072333000 CR3: 0000000001a0b000 CR4: 00000000001407f0
Stack:
 ffff880079003d98 0000000000000246 0000000000000000 ffff88007a9a4830
 ffff880000000000 ffffffff81073f47 ffff88007f212b00 ffff8800799c4260
 ffff8800783d8988 ffff88007f212b00 ffffe8ffff604800 0000000000000000
Call Trace:
 [<ffffffff81073f47>] ? trace_hardirqs_on_caller+0x145/0x1a1
 [<ffffffffa00652d3>] rpc_async_schedule+0x27/0x32 [sunrpc]
 [<ffffffff81052974>] process_one_work+0x211/0x3a5
 [<ffffffff810528d5>] ? process_one_work+0x172/0x3a5
 [<ffffffff81052eeb>] worker_thread+0x134/0x202
 [<ffffffff81052db7>] ? rescuer_thread+0x280/0x280
 [<ffffffff81052db7>] ? rescuer_thread+0x280/0x280
 [<ffffffff810584a0>] kthread+0xc9/0xd1
 [<ffffffff810583d7>] ? __kthread_parkme+0x61/0x61
 [<ffffffff814afd6c>] ret_from_fork+0x7c/0xb0
 [<ffffffff810583d7>] ? __kthread_parkme+0x61/0x61
Code: e8 87 63 fd e0 c6 05 10 dd 01 00 01 48 8b 43 70 4c 8d 6b 70 45 31 e4 a8 02 0f 85 d5 02 00 00 4c 8b 7b 48 48 c7 43 48 00 00 00 00 <4c> 8b 4b 50 4d 85 ff 75 0c 4d 85 c9 4d 89 cf 0f 84 32 01 00 00

And the output of "rpcdebug -m rpc -s all":

RPC:    61 call_refresh (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 call_refreshresult (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 call_refreshresult (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 call_refresh (status 0)
RPC:    61 call_refreshresult (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 call_refreshresult (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 call_refresh (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
RPC:    61 call_refreshresult (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 call_refresh (status 0)
RPC:    61 call_refreshresult (status 0)
RPC:    61 refreshing RPCSEC_GSS cred ffff88007a413cf0
Signed-off-by: Weston Andros Adamson <dros@netapp.com>
Cc: stable@vger.kernel.org # 2.6.37+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Currently we only report EAGAIN, which is not descriptive enough for
softconn tasks.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Ensure that call_bind_status, call_connect_status, call_transmit_status and
call_status all are capable of handling ECONNABORTED and EHOSTUNREACH.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Currently, xprt_connect_status will convert connection error values such
as ECONNREFUSED, ECONNRESET, ... into EIO, which means that they never
get handled.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>

Currently, it could leak dentry references in some cases. Make sure
we clean up properly.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

rpc.gssd expects to see an "info" file in each clntXX dir. Since adding
the dummy gssd pipe, users that run rpc.gssd see a lot of these messages
spamming the logs:

    rpc.gssd[508]: ERROR: can't open /var/lib/nfs/rpc_pipefs/gssd/clntXX/info: No such file or directory
    rpc.gssd[508]: ERROR: failed to read service info

Add a dummy gssd/clntXX/info file to help silence these messages.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

In the event that we create the gssd/clntXX dir, but the pipe creation
subsequently fails, then we should remove the clntXX dir before
returning.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Currently, the client will attempt to use krb5i in the SETCLIENTID call
even if rpc.gssd isn't running. When that fails, it'll then fall back to
RPC_AUTH_UNIX. This introduced a delay when mounting if rpc.gssd isn't
running, and causes warning messages to pop up in the ring buffer.

Check to see if rpc.gssd is running before even attempting to use krb5i
auth, and just silently skip trying to do so if it isn't. In the event
that the admin is actually trying to mount with krb5*, it will still
fail at a later stage of the mount attempt.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Now that we have a more reliable method to tell if gssd is running, we
can replace the sn->gssd_running flag with a function that will query to
see if it's up and running.

There's also no need to attempt an upcall that we know will fail, so
just return -EACCES if gssd isn't running. Finally, fix the warn_gss()
message not to claim that that the upcall timed out since we don't
necesarily perform one now when gssd isn't running, and remove the
extraneous newline from the message.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

rpc.gssd will naturally hold open any pipe named */clnt*/gssd that shows
up under rpc_pipefs. That behavior gives us a reliable mechanism to tell
whether it's actually running or not.

Create a new toplevel "gssd" directory in rpc_pipefs when it's mounted.
Under that directory create another directory called "clntXX", and then
within that a pipe called "gssd".

We'll never send an upcall along that pipe, and any downcall written to
it will just return -EINVAL.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

decode_op_hdr() cannot distinguish between an XDR decoding error and
the perfectly valid errorcode NFS4ERR_IO. This is normally not a
problem, but for the particular case of OPEN, we need to be able
to increment the NFSv4 open sequence id when the server returns
a valid response.
Reported-by: J Bruce Fields <bfields@fieldses.org>
Link: http://lkml.kernel.org/r/20131204210356.GA19452@fieldses.orgSigned-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org

Merge tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace

Pull tracing fix from Steven Rostedt:
 "A regression showed up that there's a large delay when enabling all
  events.  This was prevalent when FTRACE_SELFTEST was enabled which
  enables all events several times, and caused the system bootup to
  pause for over a minute.

  This was tracked down to an addition of a synchronize_sched()
  performed when system call tracepoints are unregistered.

  The synchronize_sched() is needed between the unregistering of the
  system call tracepoint and a deletion of a tracing instance buffer.
  But placing the synchronize_sched() in the unreg of *every* system
  call tracepoint is a bit overboard.  A single synchronize_sched()
  before the deletion of the instance is sufficient"

* tag 'trace-fixes-3.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Only run synchronize_sched() at instance deletion time

Pull aio fix from Benjamin LaHaise:
 "AIO fix from Gu Zheng that fixes a GPF that Dave Jones uncovered with
  trinity"

* git://git.kvack.org/~bcrl/aio-next:
  aio: clean up aio ring in the fail path

Pull SCSI fixes from James Bottomley:
 "This is a set of nine fixes (and one author update).

  The libsas one should fix discovery in eSATA devices, the WRITE_SAME
  one is the largest, but it should fix a lot of problems we've been
  getting with the emulated RAID devices (they've been effectively lying
  about support and then firmware has been choking on the commands).

  The rest are various crash, hang or warn driver fixes"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  [SCSI] bfa: Fix crash when symb name set for offline vport
  [SCSI] enclosure: fix WARN_ON in dual path device removing
  [SCSI] pm80xx: Tasklets synchronization fix.
  [SCSI] pm80xx: Resetting the phy state.
  [SCSI] pm80xx: Fix for direct attached device.
  [SCSI] pm80xx: Module author addition
  [SCSI] hpsa: return 0 from driver probe function on success, not 1
  [SCSI] hpsa: do not discard scsi status on aborted commands
  [SCSI] Disable WRITE SAME for RAID and virtual host adapter drivers
  [SCSI] libsas: fix usage of ata_tf_to_fis

Pull IMA fixes from James Morris:
 "Here are two more fixes for IMA"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  ima: properly free ima_template_entry structures
  ima: Do not free 'entry' before it is initialized

Pull devicetree fixes from Rob Herring:
 - Various DT binding documentation updates
 - Add Kumar Gala and remove Stephen Warren as DT binding maintainers

* tag 'dt-fixes-for-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt: binding: reword PowerPC 8xxx GPIO documentation
  ARM: tegra: delete nvidia,tegra20-spi.txt binding
  hwmon: ntc_thermistor: Fix typo (pullup-uV -> pullup-uv)
  of: add vendor prefix for GMT
  clk: exynos: Fix typos in DT bindings documentation
  of: Add vendor prefix for LG Corporation
  Documentation: net: fsl-fec.txt: Add phy-supply entry
  ARM: dts: doc: Document missing binding for omap5-mpu
  dt-bindings: add ARMv8 PMU binding
  MAINTAINERS: remove swarren from DT bindings
  MAINTAINERS: Add Kumar to Device Tree Binding maintainers group

Clean up the aio ring file in the fail path of aio_setup_ring
and ioctx_alloc. And maybe it can fix the GPF issue reported by
Dave Jones:
https://lkml.org/lkml/2013/11/25/898Signed-off-by: Gu Zheng <guz.fnst@cn.fujitsu.com>
Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>

Merge branch 'free-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into for-linus

Pull power management fixes from Rafael Wysocki:

 - cpufreq regression fix from Bjørn Mork restoring the pre-3.12
   behavior of the framework during system suspend/hibernation to avoid
   garbage sysfs files from being left behind in case of a suspend error

 - PNP regression fix to restore the correct states of devices after
   resume from hibernation broken in 3.12.  From Dmitry Torokhov.

 - cpuidle fix to prevent cpuidle device unregistration from crashing
   due to a NULL pointer dereference if cpuidle has been disabled from
   the kernel command line.  From Konrad Rzeszutek Wilk.

 - intel_idle fix for the C6 state definition on Intel Avoton/Rangeley
   processors from Arne Bockholdt.

 - Power capping framework fix to make the energy_uj sysfs attribute
   work in accordance with the documentation.  From Srinivas Pandruvada.

 - epoll fix to make it ignore the EPOLLWAKEUP flag if the kernel has
   been compiled with CONFIG_PM_SLEEP unset (in which case that flag
   should not have any effect).  From Amit Pundir.

 - cpufreq fix to prevent governor sysfs files from being lost over
   system suspend/resume in some (arguably unusual) situations.  From
   Viresh Kumar.

* tag 'pm-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PowerCap: Fix mode for energy counter
  PNP: fix restoring devices after hibernation
  cpuidle: Check for dev before deregistering it.
  epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled
  cpufreq: fix garbage kobjects on errors during suspend/resume
  cpufreq: suspend governors on system suspend/hibernate
  intel_idle: Fixed C6 state on Avoton/Rangeley processors

* pm-epoll:
  epoll: drop EPOLLWAKEUP if PM_SLEEP is disabled

* pnp:
  PNP: fix restoring devices after hibernation

* powercap:
  PowerCap: Fix mode for energy counter

* pm-cpuidle:
  cpuidle: Check for dev before deregistering it.
  intel_idle: Fixed C6 state on Avoton/Rangeley processors

* pm-cpufreq:
  cpufreq: fix garbage kobjects on errors during suspend/resume
  cpufreq: suspend governors on system suspend/hibernate

Pull arch/tile ftrace bug fix from Chris Metcalf:
 "This fixes a build failure with allyesconfig reported by Fengguang Wu
  and fixed by Tony Lu"

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  ftrace: default to tilegx if ARCH=tile is specified

Pull block layer fixes from Jens Axboe:
 "A small collection of fixes for the current series. It contains:

   - A fix for a use-after-free of a request in blk-mq.  From Ming Lei

   - A fix for a blk-mq bug that could attempt to dereference a NULL rq
     if allocation failed

   - Two xen-blkfront small fixes

   - Cleanup of submit_bio_wait() type uses in the kernel, unifying
     that.  From Kent

   - A fix for 32-bit blkg_rwstat reading.  I apologize for this one
     looking mangled in the shortlog, it's entirely my fault for missing
     an empty line between the description and body of the text"

* 'for-linus' of git://git.kernel.dk/linux-block:
  blk-mq: fix use-after-free of request
  blk-mq: fix dereference of rq->mq_ctx if allocation fails
  block: xen-blkfront: Fix possible NULL ptr dereference
  xen-blkfront: Silence pfn maybe-uninitialized warning
  block: submit_bio_wait() conversions
  Update of blkg_stat and blkg_rwstat may happen in bh context

Pull NFS client bugfixes from Trond Myklebust:
 - Stable fix for a NFSv4.1 delegation and state recovery deadlock
 - Stable fix for a loop on irrecoverable errors when returning
   delegations
 - Fix a 3-way deadlock between layoutreturn, open, and state recovery
 - Update the MAINTAINERS file with contact information for Trond
   Myklebust
 - Close needs to handle NFS4ERR_ADMIN_REVOKED
 - Enabling v4.2 should not recompile nfsd and lockd
 - Fix a couple of compile warnings

* tag 'nfs-for-3.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs: fix do_div() warning by instead using sector_div()
  MAINTAINERS: Update contact information for Trond Myklebust
  NFSv4.1: Prevent a 3-way deadlock between layoutreturn, open and state recovery
  SUNRPC: do not fail gss proc NULL calls with EACCES
  NFSv4: close needs to handle NFS4ERR_ADMIN_REVOKED
  NFSv4: Update list of irrecoverable errors on DELEGRETURN
  NFSv4 wait on recovery for async session errors
  NFS: Fix a warning in nfs_setsecurity
  NFS: Enabling v4.2 should not recompile nfsd and lockd

This matches the existing behavior in arch/tile/Makefile for defconfig.

Reported-by: fengguang.wu@intel.com
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Tony Lu <zlu@tilera.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

It has been reported that boot up with FTRACE_SELFTEST enabled can take a
very long time. There can be stalls of over a minute.

This was tracked down to the synchronize_sched() called when a system call
event is disabled. As the self tests enable and disable thousands of events,
this makes the synchronize_sched() get called thousands of times.

The synchornize_sched() was added with d562aff9 "tracing: Add support
for SOFT_DISABLE to syscall events" which caused this regression (added
in 3.13-rc1).

The synchronize_sched() is to protect against the events being accessed
when a tracer instance is being deleted. When an instance is being deleted
all the events associated to it are unregistered. The synchronize_sched()
makes sure that no more users are running when it finishes.

Instead of calling synchronize_sched() for all syscall events, we only
need to call it once, after the events are unregistered and before the
instance is deleted. The event_mutex is held during this action to
prevent new users from enabling events.

Link: http://lkml.kernel.org/r/20131203124120.427b9661@gandalf.local.homeReported-by: Petr Mladek <pmladek@suse.cz>
Acked-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Acked-by: Petr Mladek <pmladek@suse.cz>
Tested-by: Petr Mladek <pmladek@suse.cz>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

Pull btrfs MAINTAINERS file update:
 "I'm still getting settled into new devel hardware etc, but I do have
  one commit for the next rc.

  This changes my email over to fb.com, and adds a MAINTAINERS entry for
  Josef as well"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: update the MAINTAINERS file

Pull minor fbdev fixes from Tomi Valkeinen.

* tag 'fbdev-fixes-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
  video: vt8500: fix error handling in probe()
  atmel_lcdfb: fix module autoload
  fbdev: sh_mobile_meram: Fix defined but not used compiler warnings
  video: kyro: fix incorrect sizes when copying to userspace
  ARM: OMAPFB: panel-sony-acx565akm: fix bad unlock balance

Pull sound fixes from Takashi Iwai:
 "A usual pattern of half ASoC and half HD-audio fixes, although
  HD-audio fixups have more volumes, in addition to a couple of trivial
  fixes.  Nothing to worry much is found here.

  For ASoC side: a few fixes for PCM rate constraints calculations,
  regmap byte-order fix, the rest driver specific fixes (atmel, fsl,
  omap, kirkwood, wm codecs).

  For HD-audio: Dell headset and mono out fix, ELD update in polling
  mode, ALC283 Chromebook fixes, a few fixes for old AD codecs and
  MBA2, one regression fix"

* tag 'sound-3.13-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
  ALSA: hda - Fix silent output on MacBook Air 2,1
  ALSA: hda - Fix missing ELD info when using jackpoll_ms parameter
  ALSA: hda/realtek - remove hp_automute_hook from alc283_fixup_chromebook
  ASoC: wm8731: fix dsp mode configuration
  ALSA: hda/realtek - Independent of model for HP
  ALSA: hda - Fix headset mic input after muted internal mic (Dell/Realtek)
  ALSA: hda - Use always amps for auto-mute on AD1986A codec
  ALSA: hda/analog - Handle inverted EAPD properly in vmaster hook
  ALSA: hda - Another fixup for ASUS laptop with ALC660 codec
  ALSA: atmel: Fix possible array overflow
  ALSA: hda - Fix complete_all() timing in deferred probes
  ALSA: hda - Fix bad EAPD setup for HP machines with AD1984A
  ASoC: core: fix devres parameter in devm_snd_soc_register_card()
  ASoC: omap: n810: Convert to clk_prepare_enable/clk_disable_unprepare
  ASoC: fsl: set correct platform drvdata in pcm030_fabric_probe()
  ASoC: fsl: imx-pcm-fiq: Remove unused 'runtime' variable
  ASoC: fsl: imx-pcm-fiq: remove bogus period delta calculation
  ALSA: hda - Fix silent output on ASUS W7J laptop
  ASoC: core: Use consistent byte ordering in snd_soc_bytes_get
  ALSA: dice: fix array limits in dice_proc_read()
  ...

Pull pin control fixes from Linus Walleij:

 - Minor bug fixes for the Rockchip, ST-Ericsson abx500, Renesas PFC
   r8a7740 and sh7372.

 - Compilation warning fixes.

* tag 'pinctrl-v3.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  sh-pfc: sh7372: Fix pin bias setup
  sh-pfc: r8a7740: Fix pin bias setup
  pinctrl: abx500: Fix header file include guard
  pinctrl: rockchip: missing unlock on error in rockchip_set_pull()
  pinctrl: abx500: fix some more bitwise AND tests
  pinctrl: rockchip: testing the wrong variable

If accounting is on, we will do the IO completion accounting after
we have freed the request. Fix that by moving it sooner instead.
Signed-off-by: Jens Axboe <axboe@kernel.dk>