- 21 Oct, 2020 5 commits
-
-
Vinay Kumar Yadav authored
Add the logic to compare net_device returned by ip_dev_find() with the net_device list in cdev->ports[] array and return net_device if matched else NULL. Fixes: 6abde0b2 ("crypto/chtls: IPv6 support for inline TLS") Signed-off-by: Venkatesh Ellapu <venkatesh.e@chelsio.com> Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vinay Kumar Yadav authored
Netdev is filled in egress_dev when connection is established, If connection is closed before establishment, then egress_dev is NULL, Fix it using ip_dev_find() rather then extracting from egress_dev. Fixes: 6abde0b2 ("crypto/chtls: IPv6 support for inline TLS") Signed-off-by: Venkatesh Ellapu <venkatesh.e@chelsio.com> Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vinay Kumar Yadav authored
Check if netdevice is a vlan interface and find real vlan netdevice. Fixes: cc35c88a ("crypto : chtls - CPL handler definition") Signed-off-by: Venkatesh Ellapu <venkatesh.e@chelsio.com> Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Vinay Kumar Yadav authored
In chtls_sendpage() socket lock is released but not acquired, fix it by taking lock. Fixes: 36bedb3f ("crypto: chtls - Inline TLS record Tx") Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Defang Bo authored
Check that the NFC_ATTR_FIRMWARE_NAME attributes are provided by the netlink client prior to accessing them.This prevents potential unhandled NULL pointer dereference exceptions which can be triggered by malicious user-mode programs, if they omit one or both of these attributes. Similar to commit a0323b97 ("nfc: Ensure presence of required attributes in the activate_target handler"). Fixes: 9674da87 ("NFC: Add firmware upload netlink command") Signed-off-by: Defang Bo <bodefang@126.com> Link: https://lore.kernel.org/r/1603107538-4744-1-git-send-email-bodefang@126.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 20 Oct, 2020 13 commits
-
-
Geert Uytterhoeven authored
MPTCP_KUNIT_TESTS selects MPTCP, thus enabling an optional feature the user may not want to enable. Fix this by making the test depend on MPTCP instead. Fixes: a00a5822 ("mptcp: move crypto test to KUNIT") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20201019113240.11516-1-geert@linux-m68k.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Geliang Tang says: ==================== init ahmac and port of mptcp_options_received This patchset deals with initializations of mptcp_options_received's two fields, ahmac and port. ==================== Link: https://lore.kernel.org/r/cover.1603102503.git.geliangtang@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Geliang Tang authored
Move mptcp_options_received's port initialization from mptcp_parse_option to mptcp_get_options, put it together with the other fields initializations of mptcp_options_received. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Geliang Tang authored
Initialize mptcp_options_received's ahmac to zero, otherwise it will be a random number when receiving ADD_ADDR suboption with echo-flag=1. Fixes: 3df523ab ("mptcp: Add ADD_ADDR handling") Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Roi Dayan authored
Need to use the udp header type and not tcp. Fixes: 9c26ba9b ("net/sched: act_ct: Instantiate flow table entry actions") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Link: https://lore.kernel.org/r/20201019090244.3015186-1-roid@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ard Biesheuvel authored
Since commit bbc4d71d ("net: phy: realtek: fix rtl8211e rx/tx delay config"), the Realtek PHY driver will override any TX/RX delay set by hardware straps if the phy-mode device property does not match. This is causing problems on SynQuacer based platforms (the only SoC that incorporates the netsec hardware), since many were built with this Realtek PHY, and shipped with firmware that defines the phy-mode as 'rgmii', even though the PHY is configured for TX and RX delay using pull-ups. From the driver's perspective, we should not make any assumptions in the general case that the PHY hardware does not require any initial configuration. However, the situation is slightly different for ACPI boot, since it implies rich firmware with AML abstractions to handle hardware details that are not exposed to the OS. So in the ACPI case, it is reasonable to assume that the PHY comes up in the right mode, regardless of whether the mode is set by straps, by boot time firmware or by AML executed by the ACPI interpreter. So let's ignore the 'phy-mode' device property when probing the netsec driver in ACPI mode, and hardcode the mode to PHY_INTERFACE_MODE_NA, which should work with any PHY provided that it is configured by the time the driver attaches to it. While at it, document that omitting the mode is permitted for DT probing as well, by setting the phy-mode DT property to the empty string. Fixes: 533dd11a ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201018163625.2392-1-ardb@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Tom Rix authored
A break is not needed if it is preceded by a return Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201019191500.9264-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Tom Rix authored
A break is not needed if it is preceded by a return or goto Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201019172607.31622-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ido Schimmel authored
While insertion of 16k nexthops all using the same netdev ('dummy10') takes less than a second, deletion takes about 130 seconds: # time -p ip -b nexthop.batch real 0.29 user 0.01 sys 0.15 # time -p ip link set dev dummy10 down real 131.03 user 0.06 sys 0.52 This is because of repeated calls to synchronize_rcu() whenever a nexthop is removed from a nexthop group: # /usr/share/bcc/tools/offcputime -p `pgrep -nx ip` -K ... b'finish_task_switch' b'schedule' b'schedule_timeout' b'wait_for_completion' b'__wait_rcu_gp' b'synchronize_rcu.part.0' b'synchronize_rcu' b'__remove_nexthop' b'remove_nexthop' b'nexthop_flush_dev' b'nh_netdev_event' b'raw_notifier_call_chain' b'call_netdevice_notifiers_info' b'__dev_notify_flags' b'dev_change_flags' b'do_setlink' b'__rtnl_newlink' b'rtnl_newlink' b'rtnetlink_rcv_msg' b'netlink_rcv_skb' b'rtnetlink_rcv' b'netlink_unicast' b'netlink_sendmsg' b'____sys_sendmsg' b'___sys_sendmsg' b'__sys_sendmsg' b'__x64_sys_sendmsg' b'do_syscall_64' b'entry_SYSCALL_64_after_hwframe' - ip (277) 126554955 Since nexthops are always deleted under RTNL, synchronize_net() can be used instead. It will call synchronize_rcu_expedited() which only blocks for several microseconds as opposed to multiple milliseconds like synchronize_rcu(). With this patch deletion of 16k nexthops takes less than a second: # time -p ip link set dev dummy10 down real 0.12 user 0.00 sys 0.04 Tested with fib_nexthops.sh which includes torture tests that prompted the initial change: # ./fib_nexthops.sh ... Tests passed: 134 Tests failed: 0 Fixes: 90f33bff ("nexthops: don't modify published nexthop groups") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: David Ahern <dsahern@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20201016172914.643282-1-idosch@idosch.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Maxim Kochetkov authored
The VSC9953 Seville switch has 2 megabits of buffer split into 4360 words of 60 bytes each. 2048 * 1024 is 2 megabytes instead of 2 megabits. 2 megabits is (2048 / 8) * 1024 = 256 * 1024. Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Fixes: a63ed92d ("net: dsa: seville: fix buffer size of the queue system") Link: https://lore.kernel.org/r/20201019050625.21533-1-fido_max@inbox.ruSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Po-Hsu Lin authored
The kci_test_encap_fou() test from kci_test_encap() in rtnetlink.sh needs the fou module to work. Otherwise it will fail with: $ ip netns exec "$testns" ip fou add port 7777 ipproto 47 RTNETLINK answers: No such file or directory Error talking to the kernel Add the CONFIG_NET_FOU into the config file as well. Which needs at least to be set as a loadable module. Fixes: 6227efc1 ("selftests: rtnetlink.sh: add vxlan and fou test cases") Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Link: https://lore.kernel.org/r/20201019030928.9859-1-po-hsu.lin@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Christian Eggers authored
The Marvell 88E6060 uses tag_trailer.c and the KSZ8795, KSZ9477 and KSZ9893 switches also use tail tags. Fixes: 7a6ffe76 ("net: dsa: point out the tail taggers") Signed-off-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201016171603.10587-1-ceggers@arri.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Valentin Vidic authored
Fixes gcc warning: passing argument 1 of 'kfree' makes pointer from integer without a cast Fixes: 3af5f0f5 ("net: korina: fix kfree of rx/tx descriptor array") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Link: https://lore.kernel.org/r/20201018184255.28989-1-vvidic@valentin-vidic.from.hrSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 19 Oct, 2020 1 commit
-
-
Heiner Kallweit authored
For several network drivers it was reported that using __napi_schedule_irqoff() is unsafe with forced threading. One way to fix this is switching back to __napi_schedule, but then we lose the benefit of the irqoff version in general. As stated by Eric it doesn't make sense to make the minimal hard irq handlers in drivers using NAPI a thread. Therefore ensure that the hard irq handler is never thread-ified. Fixes: 9a899a35 ("r8169: switch to napi_schedule_irqoff") Link: https://lkml.org/lkml/2020/10/18/19Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/4d3ef84a-c812-5072-918a-22a6f6468310@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 18 Oct, 2020 5 commits
-
-
Taehee Yoo authored
dev->unlink_list is reused unless dev is deleted. So, list_del() should not be used. Due to using list_del(), dev->unlink_list can't be reused so that dev->nested_level update logic doesn't work. In order to fix this bug, list_del_init() should be used instead of list_del(). Test commands: ip link add bond0 type bond ip link add bond1 type bond ip link set bond0 master bond1 ip link set bond0 nomaster ip link set bond1 master bond0 ip link set bond1 nomaster Splat looks like: [ 255.750458][ T1030] ============================================ [ 255.751967][ T1030] WARNING: possible recursive locking detected [ 255.753435][ T1030] 5.9.0-rc8+ #772 Not tainted [ 255.754553][ T1030] -------------------------------------------- [ 255.756047][ T1030] ip/1030 is trying to acquire lock: [ 255.757304][ T1030] ffff88811782a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync_multiple+0xc2/0x150 [ 255.760056][ T1030] [ 255.760056][ T1030] but task is already holding lock: [ 255.761862][ T1030] ffff88811130a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: bond_enslave+0x3d4d/0x43e0 [bonding] [ 255.764581][ T1030] [ 255.764581][ T1030] other info that might help us debug this: [ 255.766645][ T1030] Possible unsafe locking scenario: [ 255.766645][ T1030] [ 255.768566][ T1030] CPU0 [ 255.769415][ T1030] ---- [ 255.770259][ T1030] lock(&dev_addr_list_lock_key/1); [ 255.771629][ T1030] lock(&dev_addr_list_lock_key/1); [ 255.772994][ T1030] [ 255.772994][ T1030] *** DEADLOCK *** [ 255.772994][ T1030] [ 255.775091][ T1030] May be due to missing lock nesting notation [ 255.775091][ T1030] [ 255.777182][ T1030] 2 locks held by ip/1030: [ 255.778299][ T1030] #0: ffffffffb1f63250 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x2e4/0x8b0 [ 255.780600][ T1030] #1: ffff88811130a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: bond_enslave+0x3d4d/0x43e0 [bonding] [ 255.783411][ T1030] [ 255.783411][ T1030] stack backtrace: [ 255.784874][ T1030] CPU: 7 PID: 1030 Comm: ip Not tainted 5.9.0-rc8+ #772 [ 255.786595][ T1030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 255.789030][ T1030] Call Trace: [ 255.789850][ T1030] dump_stack+0x99/0xd0 [ 255.790882][ T1030] __lock_acquire.cold.71+0x166/0x3cc [ 255.792285][ T1030] ? register_lock_class+0x1a30/0x1a30 [ 255.793619][ T1030] ? rcu_read_lock_sched_held+0x91/0xc0 [ 255.794963][ T1030] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 255.796246][ T1030] lock_acquire+0x1b8/0x850 [ 255.797332][ T1030] ? dev_mc_sync_multiple+0xc2/0x150 [ 255.798624][ T1030] ? bond_enslave+0x3d4d/0x43e0 [bonding] [ 255.800039][ T1030] ? check_flags+0x50/0x50 [ 255.801143][ T1030] ? lock_contended+0xd80/0xd80 [ 255.802341][ T1030] _raw_spin_lock_nested+0x2e/0x70 [ 255.803592][ T1030] ? dev_mc_sync_multiple+0xc2/0x150 [ 255.804897][ T1030] dev_mc_sync_multiple+0xc2/0x150 [ 255.806168][ T1030] bond_enslave+0x3d58/0x43e0 [bonding] [ 255.807542][ T1030] ? __lock_acquire+0xe53/0x51b0 [ 255.808824][ T1030] ? bond_update_slave_arr+0xdc0/0xdc0 [bonding] [ 255.810451][ T1030] ? check_chain_key+0x236/0x5e0 [ 255.811742][ T1030] ? mutex_is_locked+0x13/0x50 [ 255.812910][ T1030] ? rtnl_is_locked+0x11/0x20 [ 255.814061][ T1030] ? netdev_master_upper_dev_get+0xf/0x120 [ 255.815553][ T1030] do_setlink+0x94c/0x3040 [ ... ] Reported-by: syzbot+4a0f7bc34e3997a6c7df@syzkaller.appspotmail.com Fixes: 1fc70edb ("net: core: add nested_level variable in net_device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201015162606.9377-1-ap420073@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Ian reports that after upgrade from v5.8.14 to v5.9 only one of his 4 ixgbe netdevs appear in the system. Quoting the comment on ixgbe_x550em_a_has_mii(): * Returns true if hw points to lowest numbered PCI B:D.F x550_em_a device in * the SoC. There are up to 4 MACs sharing a single MDIO bus on the x550em_a, * but we only want to register one MDIO bus. This matches the symptoms, since the return value from ixgbe_mii_bus_init() is no longer ignored we need to handle the higher ports of x550em without an error. Fixes: 09ef193f ("net: ethernet: ixgbe: check the return value of ixgbe_mii_bus_init()") Reported-by: Ian Kumlien <ian.kumlien@gmail.com> Tested-by: Ian Kumlien <ian.kumlien@gmail.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Link: https://lore.kernel.org/r/20201016232006.3352947-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Anant Thazhemadam authored
In set_ethernet_addr(), if get_registers() succeeds, the ethernet address that was read must be copied over. Otherwise, a random ethernet address must be assigned. get_registers() returns 0 if successful, and negative error number otherwise. However, in set_ethernet_addr(), this return value is incorrectly checked. Since this return value will never be equal to sizeof(node_id), a random MAC address will always be generated and assigned to the device; even in cases when get_registers() is successful. Correctly modifying the condition that checks if get_registers() was successful or not fixes this problem, and copies the ethernet address appropriately. Fixes: b2a0f274 ("net: rtl8150: Use the new usb control message API.") Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201011173030.141582-1-anant.thazhemadam@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Ido Schimmel authored
When 'rp_filter' is configured in strict mode (1) the tests fail because packets received from the macvlan netdevs would not be forwarded through them on the reverse path. Fix this by disabling the 'rp_filter', meaning no source validation is performed. Fixes: 1538812e ("selftests: forwarding: Add a test for VXLAN asymmetric routing") Fixes: 438a4f56 ("selftests: forwarding: Add a test for VXLAN symmetric routing") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reported-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20201015084525.135121-1-idosch@idosch.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eelco Chaudron authored
The flow_lookup() function uses per CPU variables, which must be called with BH disabled. However, this is fine in the general NAPI use case where the local BH is disabled. But, it's also called from the netlink context. The below patch makes sure that even in the netlink path, the BH is disabled. In addition, u64_stats_update_begin() requires a lock to ensure one writer which is not ensured here. Making it per-CPU and disabling NAPI (softirq) ensures that there is always only one writer. Fixes: eac87c41 ("net: openvswitch: reorder masks array based on usage") Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/160295903253.7789.826736662555102345.stgit@ebuildSigned-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 16 Oct, 2020 6 commits
-
-
Ioana Ciornei authored
The below compile time error can be seen when PHYLIB is configured as a module. ld: drivers/net/pcs/pcs-xpcs.o: in function `xpcs_read': pcs-xpcs.c:(.text+0x29): undefined reference to `mdiobus_read' ld: drivers/net/pcs/pcs-xpcs.o: in function `xpcs_soft_reset.constprop.7': pcs-xpcs.c:(.text+0x80): undefined reference to `mdiobus_write' ld: drivers/net/pcs/pcs-xpcs.o: in function `xpcs_config_aneg': pcs-xpcs.c:(.text+0x318): undefined reference to `mdiobus_write' ld: pcs-xpcs.c:(.text+0x38e): undefined reference to `mdiobus_write' ld: pcs-xpcs.c:(.text+0x3eb): undefined reference to `mdiobus_write' ld: pcs-xpcs.c:(.text+0x437): undefined reference to `mdiobus_write' ld: drivers/net/pcs/pcs-xpcs.o:pcs-xpcs.c:(.text+0xb1e): more undefined references to `mdiobus_write' follow PHYLIB being a module leads to MDIO_BUS being a module as well while the XPCS is still built-in. What should happen in this configuration is that PCS_XPCS should be forced to build as module. However, that select only acts in the opposite way so we should turn it into a depends. Fix this up by explicitly depending on MDIO_BUS. Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Fixes: 2fa4e4b7 ("net: pcs: Move XPCS into new PCS subdirectory") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
Keyu Man reported that the ICMP rate limiter could be used by attackers to get useful signal. Details will be provided in an upcoming academic publication. Our solution is to add some noise, so that the attackers no longer can get help from the predictable token bucket limiter. Fixes: 4cdf507d ("icmp: add a global rate limitation") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Keyu Man <kman001@ucr.edu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Dylan Hung authored
The new HW arbitration feature on Aspeed ast2600 will cause MAC TX to hang when handling scatter-gather DMA. Disable the problematic feature by setting MAC register 0x58 bit28 and bit27. Fixes: 39bfab88 ("net: ftgmac100: Add support for DT phy-handle property") Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hoang Huu Le authored
In commit 16ad3f40 ("tipc: introduce variable window congestion control"), we applied the algorithm to select window size from minimum window to the configured maximum window for unicast link, and, besides we chose to keep the window size for broadcast link unchanged and equal (i.e fix window 50) However, when setting maximum window variable via command, the window variable was re-initialized to unexpect value (i.e 32). We fix this by updating the fix window for broadcast as we stated. Fixes: 16ad3f40 ("tipc: introduce variable window congestion control") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hoang Huu Le authored
The queue limit of the broadcast link is being calculated base on initial MTU. However, when MTU value changed (e.g manual changing MTU on NIC device, MTU negotiation etc.,) we do not re-calculate queue limit. This gives throughput does not reflect with the change. So fix it by calling the function to re-calculate queue limit of the broadcast link. Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds authored
Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
-
- 15 Oct, 2020 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrityLinus Torvalds authored
Pull integrity updates from Mimi Zohar: "Continuing IMA policy rule cleanup and validation in particular for measuring keys, adding/removing/updating informational and error messages (e.g. "ima_appraise" boot command line option), and other bug fixes (e.g. minimal data size validation before use, return code and NULL pointer checking)" * tag 'integrity-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: Fix NULL pointer dereference in ima_file_hash evm: Check size of security.evm before using it ima: Remove semicolon at the end of ima_get_binary_runtime_size() ima: Don't ignore errors from crypto_shash_update() ima: Use kmemdup rather than kmalloc+memcpy integrity: include keyring name for unknown key request ima: limit secure boot feedback scope for appraise integrity: invalid kernel parameters feedback ima: add check for enforced appraise option integrity: Use current_uid() in integrity_audit_message() ima: Fail rule parsing when asymmetric key measurement isn't supportable ima: Pre-parse the list of keyrings in a KEY_CHECK rule
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing updates from Steven Rostedt: "Updates for tracing and bootconfig: - Add support for "bool" type in synthetic events - Add per instance tracing for bootconfig - Support perf-style return probe ("SYMBOL%return") in kprobes and uprobes - Allow for kprobes to be enabled earlier in boot up - Added tracepoint helper function to allow testing if tracepoints are enabled in headers - Synthetic events can now have dynamic strings (variable length) - Various fixes and cleanups" * tag 'trace-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (58 commits) tracing: support "bool" type in synthetic trace events selftests/ftrace: Add test case for synthetic event syntax errors tracing: Handle synthetic event array field type checking correctly selftests/ftrace: Change synthetic event name for inter-event-combined test tracing: Add synthetic event error logging tracing: Check that the synthetic event and field names are legal tracing: Move is_good_name() from trace_probe.h to trace.h tracing: Don't show dynamic string internals in synthetic event description tracing: Fix some typos in comments tracing/boot: Add ftrace.instance.*.alloc_snapshot option tracing: Fix race in trace_open and buffer resize call tracing: Check return value of __create_val_fields() before using its result tracing: Fix synthetic print fmt check for use of __get_str() tracing: Remove a pointless assignment ftrace: ftrace_global_list is renamed to ftrace_ops_list ftrace: Format variable declarations of ftrace_allocate_records ftrace: Simplify the calculation of page number for ftrace_page->records ftrace: Simplify the dyn_ftrace->flags macro ftrace: Simplify the hash calculation ftrace: Use fls() to get the bits for dup_hash() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linuxLinus Torvalds authored
Pull another Hyper-V update from Wei Liu: "One patch from Michael to get VMbus interrupt from ACPI DSDT" * tag 'hyperv-next-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: Drivers: hv: vmbus: Add parsing of VMbus interrupt in ACPI DSDT
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc updates from Helge Deller: - Added fw_cfg support for parisc on qemu - Added font support in sti text console driver for byte- and word-mode ROMs - Switch to more fine grained lws locks and improve spinlock handling - Add ioread64_hi_lo() and iowrite64_hi_lo() to avoid 0-day linking errors - Mark pointers volatile in __xchg8(), __xchg32() and __xchg64() to help compiler - Header file cleanups, mostly removal of unused HP-UX compat defines - Drop one bit from our O_NONBLOCK define to become now 000200000 - Add MAP_UNINITIALIZED define to avoid userspace compile errors - Drop CONFIG_IDE from defconfigs - Speed up synchronize_caches() on UP machines - Rewrite tlb flush threshold calculation - Comment fixes and cleanups * 'parisc-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc/sticon: Add user font support parisc/sticon: Always register sticon console driver parisc: Add MAP_UNINITIALIZED define parisc: Improve spinlock handling parisc: Install vmlinuz instead of zImage file parisc: Rewrite tlb flush threshold calculation parisc: Switch to more fine grained lws locks parisc: Mark pointers volatile in __xchg8(), __xchg32() and __xchg64() parisc: Fix comments and enable interrupts later parisc: Add alternative patching to synchronize_caches define parisc: Add ioread64_hi_lo() and iowrite64_hi_lo() parisc: disable CONFIG_IDE in defconfigs parisc: Drop useless comments in uapi/asm/signal.h parisc: Define O_NONBLOCK to become 000200000 parisc: Drop HP-UX specific fcntl and signal flags parisc: Avoid external interrupts when IPI finishes parisc: Add qemu fw_cfg interface fw_cfg: Add support for parisc architecture
-
Linus Torvalds authored
Merge tag 'linux-kselftest-kunit-fixes-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kunit updates from Shuah Khan: "Several kunit tool bug fixes in flag handling, run outside kernel tree, make errors, and generating results" * tag 'linux-kselftest-kunit-fixes-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: tool: fix display of make errors kunit: tool: handle when .kunit exists but .kunitconfig does not kunit: tool: fix --alltests flag kunit: tool: allow generating test results in JSON kunit: tool: fix running kunit_tool from outside kernel tree
-
Linus Torvalds authored
Merge tag 'linux-kselftest-next-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - speed up headers_install done during selftest build - add generic make nesting support - add support to select individual tests: Selftests build/install generates run_kselftest.sh script to run selftests on a target system. Currently the script doesn't have support for selecting individual tests. Add support for it. With this enhancement, user can select test collections (or tests) individually. e.g: run_kselftest.sh -c seccomp -t timers:posix_timers -t timers:nanosleep Additionally adds a way to list all known tests with "-l", usage with "-h", and perform a dry run without running tests with "-n". * tag 'linux-kselftest-next-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: doc: dev-tools: kselftest.rst: Update examples and paths selftests/run_kselftest.sh: Make each test individually selectable selftests: Extract run_kselftest.sh and generate stand-alone test list selftests: Add missing gitignore entries selftests: more general make nesting support selftests: use "$(MAKE)" instead of "make" for headers_install
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivialLinus Torvalds authored
Pull trivial updates from Jiri Kosina: "The latest advances in computer science from the trivial queue" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: xtensa: fix Kconfig typo spelling.txt: Remove some duplicate entries mtd: rawnand: oxnas: cleanup/simplify code selftests: vm: add fragment CONFIG_GUP_BENCHMARK perf: Fix opt help text for --no-bpf-event HID: logitech-dj: Fix spelling in comment bootconfig: Fix kernel message mentioning CONFIG_BOOT_CONFIG MAINTAINERS: rectify MMP SUPPORT after moving cputype.h scif: Fix spelling of EACCES printk: fix global comment lib/bitmap.c: fix spello fs: Fix missing 'bit' in comment
-
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID updates from Jiri Kosina: - Lenovo X1 Tablet support improvements from Mikael Wikström - "heartbeat" report fix for several Wacom devices from Jason Gerecke - bounds checking fix in hid-roccat from Dan Carpenter - stylus battery reporting fix from Dmitry Torokhov - i2c-hid support for wakeup from suspend-to-idle from Kai-Heng Feng - new driver for Vivaldi devices from Sean O'Brien - other assorted small fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: i2c-hid: Enable wakeup capability from Suspend-to-Idle HID: add vivaldi HID driver HID: hid-input: fix stylus battery reporting HID: wacom: Avoid entering wacom_wac_pen_report for pad / battery HID: i2c-hid: fix kerneldoc warnings in i2c-hid-core.c HID: core: fix kerneldoc warnings in hid-core.c HID: multitouch: Lenovo X1 Tablet Gen2 trackpoint and buttons HID: multitouch: Lenovo X1 Tablet Gen3 trackpoint and buttons HID: alps: clean up indentation issue HID: intel-ish-hid: simplify the return expression of ishtp_bus_remove_device() HID: hid-debug: fix nonblocking read semantics wrt EIO/ERESTARTSYS HID: i2c-hid: Prefer asynchronous probe HID: ite: Add USB id match for Acer One S1003 keyboard dock HID: roccat: add bounds checking in kone_sysfs_write_settings() HID: wiimote: narrow spinlock range in wiimote_hid_event() HID: wiimote: make handlers[] const HID: apple: Add support for Matias wireless keyboard HID: cp2112: Use irqchip template
-
git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatchingLinus Torvalds authored
Pull livepatching update from Jiri Kosina: "livepatching kselftest output fix from Miroslav Benes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: selftests/livepatch: Do not check order when using "comm" for dmesg checking
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull direct-io fix from Jan Kara: "Fix for unaligned direct IO read past EOF in legacy DIO code" * tag 'dio_for_v5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: direct-io: defer alignment check until after the EOF check direct-io: don't force writeback for reads beyond EOF direct-io: clean up error paths of do_blockdev_direct_IO
-