- 19 Jul, 2012 32 commits
-
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Add a couple local variables to make the tests more concise. Reorder the tests to make the for() loop checking for a matching boardtype quicker. Drop the dev_dbg message for a match. It's just add noise. Signed-off-by:
-
H Hartley Sweeten authored
This driver creates a linked list of all the pci devices in the system while it's looking for a match. It's only use is to determine if a device is "free" to use. The pci_is_enabled() helper can give us the same information. Use that instead and remove the linked list. Signed-off-by:
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Use pci_is_enabled() in the "find pci device" function to determine if the found pci device is not in use and move the comedi_pci_enable() call into the attach. Signed-off-by:
-
H Hartley Sweeten authored
Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Drop the printk error messages. They just add noise. Signed-off-by:
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Use pci_is_enabled() in the "find pci device" function to determine if the found pci device is not in use and move the comedi_pci_enable() call into the attach. Signed-off-by:
-
H Hartley Sweeten authored
Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Drop the printk error messages. They just add noise. Signed-off-by:
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by:
-
H Hartley Sweeten authored
Introduce a wrapper for to_pci_dev() to allow the comedi_pci_drivers to store the pci_dev pointer in the comedi_device hw_dev variable and retrieve it easily. Signed-off-by:
-
Toshiaki Yamane authored
The below checkpatch error was fixed, drivers/staging/cptm1217/cp_tm1217.h:5: ERROR: open brace '{' following struct go on the same line Signed-off-by:Toshiaki Yamane <yamanetoshi@gmail.com> Signed-off-by:
-
Lauri Hintsala authored
Signed-off-by:
Lauri Hintsala <lauri.hintsala@bluegiga.com> Signed-off-by:
-
Toshiaki Yamane authored
The below checkpatch warns was fixed, drivers/staging/frontier/tranzport.c:356: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/tranzport.c:523: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/tranzport.c:696: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/alphatrack.c:336: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/alphatrack.c:497: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... drivers/staging/frontier/alphatrack.c:568: WARNING: Prefer pr_err(... to printk(KERN_ERR, ... Signed-off-by:
-
Toshiaki Yamane authored
The below checkpatch warns was fixed, drivers/staging/et131x/et131x.c:2556: WARNING: Prefer pr_info(... to printk(KERN_INFO, ... drivers/staging/et131x/et131x.c:2577: WARNING: Prefer pr_info(... to printk(KERN_INFO, ... drivers/staging/et131x/et131x.c:5189: WARNING: Prefer pr_info(... to printk(KERN_INFO, ... And fixed below, -added pr_fmt -fixed printk formats for dma_addr_t -converted printk to netdev_info Signed-off-by:
-
Marcos Paulo de Souza authored
This patch removes all references of "if 0" blocks in the sbe-2t3e3 driver. Signed-off-by:
Marcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by:
-
Duan Jiong authored
Signed-off-by:
Duan Jiong <djduanjiong@gmail.com> Signed-off-by:
-
Martyn Welch authored
The memcpy_fromio() and memcpy_toio() functions use the __memcpy() function, at least on x86. This function carries out transfers smaller than 32 bits as multiple 8 bit transfers, causing a single (aligned) 16 bit transfer to be split into 2 8 bit transfers which may not be supported by the target VME device. The commit 53059aa0 fixed this for the ca91cx42, however this was not fixed for the tsi148 at the time. This patch uses the same algorithm to fix the tsi148. Reported-by:
Daniel Lambert <daniel.lambert@clermont.in2p3.fr> Signed-off-by:
Martyn Welch <martyn.welch@ge.com> Signed-off-by:
-
Stephen Rothwell authored
Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
Javier Muñoz <jmunhoz@igalia.com> Signed-off-by:
-
- 17 Jul, 2012 8 commits
-
-
Anton Vorontsov authored
Decoding the binary trace w/ a different kernel might be troublesome since we convert addresses to symbols. For kernels with minimal changes, the mappings would probably match, but it's not guaranteed at all. (But still we could convert the addresses by hand, since we do print raw addresses.) If we use modules, the symbols could be loaded at different addresses from the previously booted kernel, and so this would also fail, but there's nothing we can do about it. Also, the binary data format that pstore/ram is using in its ringbuffer may change between the kernels, so here we too must ensure that we're running the same kernel. So, there are two questions really: 1. How to compute the unique kernel tag; 2. Where to store it. In this patch we're using LINUX_VERSION_CODE, just as hibernation (suspend-to-disk) does. This way we are protecting from the kernel version mismatch, making sure that we're running the same kernel version and patch level. We could use CRC of a symbol table (as suggested by Tony Luck), but for now let's not be that strict. And as for storing, we are using a small trick here. Instead of allocating a dedicated buffer for the tag (i.e. another prz), or hacking ram_core routines to "reserve" some control data in the buffer, we are just encoding the tag into the buffer signature (and XOR'ing it with the actual signature value, so that buffers not needing a tag can just pass zero, which will result into the plain old PRZ signature). Suggested-by:
Steven Rostedt <rostedt@goodmis.org> Suggested-by:
Tony Luck <tony.luck@intel.com> Suggested-by:
Colin Cross <ccross@android.com> Signed-off-by:
Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by:
-
Anton Vorontsov authored
Headers should really include all the needed prototypes, types, defines etc. to be self-contained. This is a long-standing issue, but apparently the new tracing code unearthed it (SMP=n is also a prerequisite): In file included from fs/pstore/internal.h:4:0, from fs/pstore/ftrace.c:21: include/linux/pstore.h:43:15: error: field ‘read_mutex’ has incomplete type While at it, I also added the following: linux/types.h -> size_t, phys_addr_t, uXX and friends linux/spinlock.h -> spinlock_t linux/errno.h -> Exxxx linux/time.h -> struct timespec (struct passed by value) struct module and rs_control forward declaration (passed via pointers). Signed-off-by: -
Samuel Iglesias Gonsálvez authored
Use the ANSI/VITA 4.0-1995 (S2011) naming convention for the mezzanine or daughter boards. They are called IP modules in the Standard. Signed-off-by:
Samuel Iglesias Gonsálvez <siglesias@igalia.com> Signed-off-by:
-
Samuel Iglesias Gonsálvez authored
Signed-off-by:
-
Erik Jones authored
Fixed a coding style issue. An else statement was not on the same line as the preceding if statement's closing brace. Signed-off-by:
Erik Jones <erik@ejnode.com> Signed-off-by:
-
Erik Jones authored
Fixed a coding style issue. Signed-off-by:
-
Greg Kroah-Hartman authored
Merge tag 'iio-fixes-3.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next IIO fixes for elements queued for 3.6 merge window. 3 types of fix here. 1) Incorrect pointer casting via phys_addr_t which causes trouble on some architectures. 2) request_irq and free_irq dev_id parameters not matching. 3) Inconsistencies in client_data for some i2c devices (writing one pointer and expecting another later).
-
Anton Vorontsov authored
Since the function accepts just one bit, we can use the switch construction instead of if/else if/... Just a cosmetic change, there should be no functional changes. Suggested-by:
-
