- 20 Apr, 2011 1 commit
-
-
Shan Wei authored
Fix the below compile warning: drivers/net/forcedeth.c:4266: warning: ‘nv_set_tso’ defined but not used commit 569e1463 converts forcedeth driver to use hw_features. So, implement function of .set_tso is abandoned. Signed-off-by:
Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 19 Apr, 2011 10 commits
-
-
-
David S. Miller authored
Conflicts: drivers/net/bnx2x/bnx2x_ethtool.c
-
Michał Mirosław authored
Another simple conversion. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by:
-
Michał Mirosław authored
This also removes private feature flags that were always set to true. You may want to move vmxnet3_set_features() to vmxnet3_drv.c as a following cleanup. Signed-off-by:
-
Michał Mirosław authored
Side effect: ->gro_enable is removed as napi_gro_receive() does the fallback itself. Signed-off-by:
-
Michał Mirosław authored
Also remove flags that were not used or are now redundant to hw_features bits. No device had UDP_CSUM_CAPABLE set. Signed-off-by:
-
Michał Mirosław authored
This removes advertising HW_CSUM as driver does not support it. Note: driver advertises TSO6 but not IPV6_CSUM - bug maybe? Signed-off-by:
-
Michał Mirosław authored
Fix build warnings like the following: WARNING: drivers/net/built-in.o(.data+0x12434): Section mismatch in reference from the variable madgemc_driver to the variable .init.data:madgemc_adapter_ids And add some consts to EISA device ID tables along the way. Signed-off-by:
-
Francois Romieu authored
- the MSS value is actually contained in a 11 bits wide (0x7ff) field. The extra bit in the former MSSMask did encompass the TSO command bit ("LargeSend") as well (0xfff). Oops. - the Tx descriptor layout is not the same through the whole chipset family. The 8169 documentation, the 8168c documentation and Realtek's drivers (8.020.00, 1.019.00, 6.014.00) highlight two layouts: 1. 8169, 8168 up to 8168b (included) and 8101 2. {8102e, 8168c} and beyond - notwithstanding the "first descriptor" and "last descriptor" bits, the same Tx descriptor content is enforced when a packet consists of several descriptors. The chipsets are documented to require it. Credits go to David Dillow <dave@thedillows.org> for the original patch. Signed-off-by:Francois Romieu <romieu@fr.zoreil.com> Cc: Realtek <nic_swsd@realtek.com> Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
Jon Mason <jon.mason@myri.com> Signed-off-by:
-
- 18 Apr, 2011 29 commits
-
-
Mark Brown authored
Commit c88fcb (net: dm9000: convert to hw_features) broke the build of the dm9000 driver since it merged functions which use different names for the board info structure used for I/O operations without updating all the references to use the same name. Fix that. Signed-off-by:
Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by:
-
Ben Hutchings authored
It is undesirable for the bonding driver to be poking into higher level protocols, and notifiers provide a way to avoid that. This does mean removing the ability to configure reptitition of gratuitous ARPs and unsolicited NAs. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Ben Hutchings authored
The NETDEV_NOTIFY_PEERS notifier indicates that a device moved to a different physical link; this also applies to any VLAN devices on top of it. Signed-off-by:
-
Ben Hutchings authored
The NETDEV_NOTIFY_PEERS notifier is a request to send such advertisements following migration to a different physical link, e.g. virtual machine migration. Signed-off-by:
-
David Decotigny authored
This updates bnx2x to use the ethtool_cmd_speed() family of functions (see b11f8d8c in 2.6.27-rc3 aka. "ethtool: Expand ethtool_cmd.speed to 32 bits") to get and set the link speed via ethtool. This allows to avoid manually accessing ethtool_cmd's speed_hi field. Signed-off-by:
David Decotigny <decot@google.com> Signed-off-by:
-
Krishna Kumar authored
Several tests in the ipv6 routing code check IFF_LOOPBACK, and allowing stacking such as VLAN'ing on top of loopback results in a netdevice which reports IFF_LOOPBACK but really isn't the loopback device. Instead of spamming the ipv6 routing code with even more special tests, simply disallow VLAN over loopback. The result of this patch is: # modprobe 8021q # vconfig add lo 43 ERROR: trying to add VLAN #43 to IF -:lo:- error: Operation not supported Signed-off-by:
Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by:
-
David S. Miller authored
As noticed by Ben Hutchings, when we move entries from one table to another we leak all except the first entry. Put back the "next" variable removed by commit 9bf9055e ("decnet: Fix set-but-unused variable.") and use it properly. Reported-by:
-
Joe Perches authored
Roger Luethi has had several reports of Rhine NICs providing an invalid MAC address. If so, assign a random MAC address so the hardware can still be used. Tested as a standalone interface, as carrier for ppp, and as a bonding slave. Original-patch-by:
Alexandru Gagniuc <mr.nuke.me@gmail.com> Signed-off-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Joe Perches authored
Use the more current logging styles. Add #define DEBUG to make netdev_dbg always active. Signed-off-by:
-
Stephen Hemminger authored
Commit bb900b27 ("bridge: allow creating bridge devices with netlink") introduced a bug in net-next because of a typo in notifier. Every device would have the sysfs bridge directory (and files). Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
Dimitris Michailidis <dm@chelsio.com> Signed-off-by:
-
Yaniv Rosner authored
This patch fixes port identification on optic devices when there's no link on the port. Signed-off-by:
Yaniv Rosner <yanivr@broadcom.com> Signed-off-by:
Eilon Greenstein <eilong@broadcom.com> Signed-off-by:
-
Thiago Farina authored
Signed-off-by:
Thiago Farina <tfransosi@gmail.com> Signed-off-by:
-
Michał Mirosław authored
Side effect: allow toggling of TX offloads. Signed-off-by:
-
Michał Mirosław authored
Note: Driver modifies its struct net_device_ops. This will break if used for multiple devices that are not all the same (if that HW config is possible). Signed-off-by:
-
Michał Mirosław authored
Side effect: allow toggling of TX offloads. Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
Remove be_set_flags() as it's already covered by hw_features. Signed-off-by:
-
Michał Mirosław authored
Signed-off-by:
-
Michał Mirosław authored
Side effect: don't reenable RXCSUM on every ifdown/ifup. Signed-off-by:
-
Michał Mirosław authored
As a side effect, make TX offloads changeable. Signed-off-by:
-
Francois Romieu authored
Per Hayes's request. Signed-off-by:
-
Michał Mirosław authored
This removes some of the remnants of LRO -> GRO conversion. Signed-off-by:
-
Michał Mirosław authored
Not much of a conversion anyway - macvlan has no way to change the offload settings independently to its base device. Signed-off-by:
-
-
David S. Miller authored
The variables 'tx_min' and 'tx_max' are set but not used in be_set_coalesce(). Similarly for 'region' in be_do_flash(). Just kill them off. Signed-off-by: -
David S. Miller authored
The variable 'fcr' is set but not used in isdn_tty_change_speed(). Just kill it off. Signed-off-by: -
David S. Miller authored
The variable 'flowlabel' is set but unused in ip6t_mangle_out(). The intention here was to compare this key to the header value after mangling, and trigger a route lookup on mismatch. Make it so. Signed-off-by: -
David S. Miller authored
The variable 'target' is set but unused in compat_copy_entry_from_user(). Just kill it off. Signed-off-by:
-
