- 14 Jun, 2019 7 commits
-
-
Greg Kroah-Hartman authored
As stated before, there is no need to care if a debugfs function succeeds or not, and no code logic in the kernel should ever change based on a debugfs function return value, so make drm_debugfs_create_files() never fail. If it encounters an odd/rare/impossible error (i.e. out of memory, or a duplicate debugfs filename to be created), just keep on moving as if nothing improper had happened. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20190614095110.3716-2-gregkh@linuxfoundation.org
-
Sandor Yu authored
The value stored in the rate field of struct drm_dp_link should be the actual link-rate and not the bw_code. Right now the driver stores the code and converts it to the rate. So fixup the driver to store the rate itself. Signed-off-by:
Sandor Yu <Sandor.yu@nxp.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190605080424.28731-1-sandor.yu@nxp.com
-
Justin Swartz authored
Like the RK3328, RK322x SoCs offer a Synopsis DesignWare HDMI transmitter and an Innosilicon HDMI PHY. Add a new dw_hdmi_plat_data struct, rk3228_hdmi_drv_data. Assign a set of mostly generic rk3228_hdmi_phy_ops functions. Add dw_hdmi_rk3228_setup_hpd() to enable the HDMI HPD and DDC lines. Signed-off-by:
Justin Swartz <justin.swartz@risingedge.co.za> Signed-off-by:
-
Greg Hackmann authored
The show_fdinfo handler exports the same information available through debugfs on a per-buffer basis. Signed-off-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
Chenbo Feng <fengc@google.com> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190613223408.139221-4-fengc@google.com
-
Greg Hackmann authored
This patch adds complimentary DMA_BUF_SET_NAME ioctls, which lets userspace processes attach a free-form name to each buffer. This information can be extremely helpful for tracking and accounting shared buffers. For example, on Android, we know what each buffer will be used for at allocation time: GL, multimedia, camera, etc. The userspace allocator can use DMA_BUF_SET_NAME to associate that information with the buffer, so we can later give developers a breakdown of how much memory they're allocating for graphics, camera, etc. Signed-off-by:
-
Greg Hackmann authored
By traversing /proc/*/fd and /proc/*/map_files, processes with CAP_ADMIN can get a lot of fine-grained data about how shmem buffers are shared among processes. stat(2) on each entry gives the caller a unique ID (st_ino), the buffer's size (st_size), and even the number of pages currently charged to the buffer (st_blocks / 512). In contrast, all dma-bufs share the same anonymous inode. So while we can count how many dma-buf fds or mappings a process has, we can't get the size of the backing buffers or tell if two entries point to the same dma-buf. On systems with debugfs, we can get a per-buffer breakdown of size and reference count, but can't tell which processes are actually holding the references to each buffer. Replace the singleton inode with full-fledged inodes allocated by alloc_anon_inode(). This involves creating and mounting a mini-pseudo-filesystem for dma-buf, following the example in fs/aio.c. Signed-off-by:
-
Sean Paul authored
I missed amdgpu in my connnector_helper_funcs->atomic_check conversion, which is understandably causing compilation failures. Fixes: 6f3b6278 ("drm: Convert connector_helper_funcs->atomic_check to accept drm_atomic_state") Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Eric Anholt <eric@anholt.net> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> [for rcar lvds] Cc: Sean Paul <seanpaul@chromium.org> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Lyude Paul <lyude@redhat.com> Cc: Karol Herbst <karolherbst@gmail.com> Cc: Ilia Mirkin <imirkin@alum.mit.edu> Cc: dri-devel@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Reported-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190614002713.141340-1-sean@poorly.run
-
- 13 Jun, 2019 26 commits
-
-
Sean Paul authored
Fixes the following warning: ../drivers/gpu/drm/drm_connector.c:981: WARNING: Definition list ends without a blank line; unexpected unindent. Fixes: a09db883 ("drm: Fix docbook warnings in hdr metadata helper structures") Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjä <ville.syrjala@linux.intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: "Ville Syrjä" <ville.syrjala@linux.intel.com> Cc: Hans Verkuil <hansverk@cisco.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Cc: Sean Paul <sean@poorly.run> (v1) Cc: Uma Shankar <uma.shankar@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Sean Paul authored
Instead of flushing all vops every time we get a dirtyfb call, use the damage helper to kick off an atomic commit. Even though we don't use damage clips, the helper commit will force us through the normal psr_inhibit_get/put sequence. Changes in v3: - Added to the set Changes in v4: - None Changes in v5: - None Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-7-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-7-sean@poorly.runSuggested-by:
Daniel Vetter <daniel@ffwll.ch> Tested-by:
-
Sean Paul authored
This patch adds a new drm helper library to help drivers implement self refresh. Drivers choosing to use it will register crtcs and will receive callbacks when it's time to enter or exit self refresh mode. In its current form, it has a timer which will trigger after a driver-specified amount of inactivity. When the timer triggers, the helpers will submit a new atomic commit to shut the refreshing pipe off. On the next atomic commit, the drm core will revert the self refresh state and bring everything back up to be actively driven. From the driver's perspective, this works like a regular disable/enable cycle. The driver need only check the 'self_refresh_active' state in crtc_state. It should initiate self refresh mode on the panel and enter an off or low-power state. Changes in v2: - s/psr/self_refresh/ (Daniel) - integrated the psr exit into the commit that wakes it up (Jose/Daniel) - made the psr state per-crtc (Jose/Daniel) Changes in v3: - Remove the self_refresh_(active|changed) from connector state (Daniel) - Simplify loop in drm_self_refresh_helper_alter_state (Daniel) - Improve self_refresh_aware comment (Daniel) - s/self_refresh_state/self_refresh_data/ (Daniel) Changes in v4: - Move docbook location below panel (Daniel) - Improve docbook with references and more detailed explanation (Daniel) - Instead of register/unregister, use init/cleanup (Daniel) Changes in v5: - Resolved conflict in drm_atomic_helper.c #include block - Resolved conflict in rst with HDCP helper docs Changes in v6: - Fix include ordering, clean up forward declarations (Sam) Link to v1: https://patchwork.freedesktop.org/patch/msgid/20190228210939.83386-2-sean@poorly.run Link to v2: https://patchwork.freedesktop.org/patch/msgid/20190326204509.96515-1-sean@poorly.run Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-6-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-6-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-6-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Jose Souza <jose.souza@intel.com> Cc: Zain Wang <wzz@rock-chips.com> Cc: Tomasz Figa <tfiga@chromium.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by:
-
Sean Paul authored
Everyone who implements connector_helper_funcs->atomic_check reaches into the connector state to get the atomic state. Instead of continuing this pattern, change the callback signature to just give atomic state and let the driver determine what it does and does not need from it. Eventually all atomic functions should do this, but that's just too much busy work for me. Changes in v3: - Added to the set Changes in v4: - None Changes in v5: - intel_digital_connector_atomic_check declaration moved to i915_atomic.h Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-5-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-5-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Eric Anholt <eric@anholt.net> Tested-by:
-
Sean Paul authored
This patch adds atomic variants for all of pre_enable/enable/disable/post_disable bridge functions. These will be called from the appropriate atomic helper functions. If the bridge driver doesn't implement the atomic version of the function, we will fall back to the vanilla implementation. Note that some drivers call drm_bridge_disable directly, and these cases are not covered. It's up to the driver to decide whether to implement both atomic_disable and disable, or if it's not necessary. Changes in v3: - Added to the patchset Changes in v4: - Fix up docbook references (Daniel) Changes in v5: - None Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-4-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-4-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Laurent Pinchart authored
Add functions to the atomic core to retrieve the old and new connectors associated with an encoder in a drm_atomic_state. This is useful for encoders and bridges that need to access the connector, for instance for the drm_display_info. The CRTC associated with the encoder can also be retrieved through the connector state, and from it, the old and new CRTC states. Changed in v4: - Added to the set Changed in v5: - Fix up docbook (Daniel & Laurent) Changed in v6: - Updated commit subject (Sam) Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-3-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-3-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> [seanpaul removed WARNs from helpers and added docs to explain why returning NULL might be valid] Signed-off-by:
-
Sean Paul authored
This patch adds atomic_enable and atomic_disable callbacks to the encoder helpers. This will allow encoders to make informed decisions in their start-up/shutdown based on the committed state. Aside from the new hooks, this patch also introduces the new signature for .atomic_* functions going forward. Instead of passing object state (well, encoders don't have atomic state, but let's ignore that), we pass the entire atomic state so the driver can inspect more than what's happening locally. This is particularly important for the upcoming self refresh helpers. Changes in v3: - Added patch to the set Changes in v4: - Move atomic_disable above prepare (Daniel) - Add breadcrumb to .enable() docbook (Daniel) Changes in v5: - None Changes in v6: - Tweak kerneldoc some more (Sam) Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-2-sean@poorly.run Link to v4: https://patchwork.freedesktop.org/patch/msgid/20190508160920.144739-2-sean@poorly.run Link to v5: https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-2-sean@poorly.run Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Tested-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190613114618.GD13119@kroah.com
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Because there is no need to check these functions, a number of local functions can be made to return void to simplify things as nothing can fail. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Linus Walleij authored
This converts the Analogix display port to use GPIO descriptors instead of DT-extracted numbers. Cc: Douglas Anderson <dianders@chromium.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
-
Linus Walleij authored
This include is only used for some gpio drivers and consumers that look up GPIO numbers directly from the device tree. This driver does not use it and only needs <linux/gpio/consumer.h>. Delete the unused include. Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by:
-
Hariprasad Kelam authored
fix below warning reported by coccicheck ./drivers/gpu/drm/bridge/analogix/analogix_dp_core.c:1414:6-8: WARNING: possible condition with no effect (if == else) Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: "Guido Günther" <agx@sigxcpu.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
Guido Günther <agx@sigxcpu.org> Signed-off-by:
-
Greg Kroah-Hartman authored
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Also, because there is no need to save the file dentry, remove the local variable and just recursively delete the whole directory when shutting down. Cc: Lukas Wunner <lukas@wunner.de> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: dri-devel@lists.freedesktop.org Signed-off-by:
-
Thomas Zimmermann authored
The GEM VRAM functions with kmap-object argument are not required any longer. Remove them. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Acked-by:
Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190613073041.29350-10-tzimmermann@suse.de
-
Thomas Zimmermann authored
The lock functions and the locked-pin/unpin functions of GEM VRAM are not required any longer. Remove them. Signed-off-by:
-
Thomas Zimmermann authored
The cursor handling in mgag200 is complicated to understand. It touches a number of different BOs, but doesn't really use all of them. Rewriting the cursor update reduces the amount of cursor state. There are two BOs for double-buffered HW updates. The source BO updates the one that is currently not displayed and then switches buffers. Explicit BO locking has been removed from the code. BOs are simply pinned and unpinned in video RAM. v2: * pin cursor BOs to current location Signed-off-by:
-
Thomas Zimmermann authored
Another explicit lock operation of a GEM VRAM BO is located in mgag200's framebuffer update code. Instead of locking the BO, we pin it to wherever it is. v2: * update with pin flag of 0 Signed-off-by:
-
Thomas Zimmermann authored
Another explicit lock operation of a GEM VRAM BO is located in AST's framebuffer update code. Instead of locking the BO, we pin it to wherever it is. v2: * update with pin flag of 0 Signed-off-by:
-
Thomas Zimmermann authored
The ast driver used to lock the cursor source BO during updates. Locking should be done internally by the BO's implementation, so we pin it instead to system memory. The mapping information is also stored in the BO. No need to have an extra argument to the kmap function. v2: * pin cursor BOs to current location Signed-off-by:
-
Thomas Zimmermann authored
The ast driver's data structures store unused or uncecessary cursor state. Most of the cursor state is already stored elsewhere and can be retrieved when necessary. Remove the obsolete fields and adapt users accordingly. Signed-off-by:
-
Thomas Zimmermann authored
The unpin operation was missing from ast_cursor_fini(). Fixed now. Signed-off-by:
-
Thomas Zimmermann authored
Pinning a buffer prevents it from being moved to a different memory location. For some operations, such as buffer updates, it is not important where the buffer is located. Setting the pin function's pl_flag argument to 0 will pin the buffer to whereever it is stored. v2: * document pin flags in PRIME pin helper Signed-off-by:
-
Dan Carpenter authored
We never set "vblank" to "false". Current versions of GCC will initialize it to zero automatically at certain optimization levels so that's probably why this didn't show up in testing. Fixes: 5fc537bf ("drm/mcde: Add new driver for ST-Ericsson MCDE") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Daniel Vetter authored
ast doesn't implement the mode_set_base_atomic hook this would need, so this is dead code. Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Acked-by:
-
Gerd Hoffmann authored
No need to have our own implementation, atomic helpers can do it for us. Signed-off-by:
-
- 12 Jun, 2019 6 commits
-
-
Sean Paul authored
I copied the kerneldoc for encoder_funcs.atomic_enable from encoder_funcs.enable in a recent patch [1]. Sam rightly pointed out in the review that "for symmetry with" text is awkward [2]. So here's a patch to fix up the source of the awkward language. [1] https://patchwork.freedesktop.org/patch/msgid/20190611160844.257498-2-sean@poorly.run [2] https://patchwork.freedesktop.org/patch/msgid/20190611185352.GA16305@ravnborg.orgSuggested-by:
Sam Ravnborg <sam@ravnborg.org> Reviewed-by:
-
Chris Wilson authored
Mark the access to reservation_object.fence as being protected to silence sparse. Signed-off-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190612132830.31221-1-chris@chris-wilson.co.uk
-
Wolfram Sang authored
We have a dedicated pointer for that, so use it. Much easier to read and less computation involved. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
-
Thomas Zimmermann authored
Acquiring drm_client_dev.modeset_mutex after the locks in drm_fb_helper.dev creates a deadlock with drm_setup_crtcs() as shown below: [ 4.959319] fbcon: radeondrmfb (fb0) is primary device [ 4.993952] Console: switching to colour frame buffer device 240x67 [ 4.994040] [ 4.994041] ====================================================== [ 4.994041] WARNING: possible circular locking dependency detected [ 4.994042] 5.2.0-rc4-1-default+ #39 Tainted: G E [ 4.994043] ------------------------------------------------------ [ 4.994043] systemd-udevd/369 is trying to acquire lock: [ 4.994044] 00000000fb622acb (&client->modeset_mutex){+.+.}, at: drm_fb_helper_pan_display+0x103/0x1f0 [drm_kms_helper] [ 4.994055] [ 4.994055] but task is already holding lock: [ 4.994055] 0000000028767ae4 (crtc_ww_class_mutex){+.+.}, at: drm_modeset_lock+0x42/0xf0 [drm] [ 4.994072] [ 4.994072] which lock already depends on the new lock. [ 4.994072] [ 4.994072] [ 4.994072] the existing dependency chain (in reverse order) is: [ 4.994073] [ 4.994073] -> #3 (crtc_ww_class_mutex){+.+.}: [ 4.994076] lock_acquire+0x9e/0x170 [ 4.994079] __ww_mutex_lock.constprop.18+0x97/0xf40 [ 4.994080] ww_mutex_lock+0x30/0x90 [ 4.994091] drm_modeset_lock+0x42/0xf0 [drm] [ 4.994102] drm_modeset_lock_all_ctx+0x1f/0xe0 [drm] [ 4.994113] drm_modeset_lock_all+0x5e/0x1a0 [drm] [ 4.994163] intel_modeset_init+0x60b/0xda0 [i915] .. [ 4.994253] [ 4.994253] -> #2 (crtc_ww_class_acquire){+.+.}: [ 4.994255] lock_acquire+0x9e/0x170 [ 4.994270] drm_modeset_acquire_init+0xcc/0x100 [drm] [ 4.994280] drm_modeset_lock_all+0x44/0x1a0 [drm] [ 4.994320] intel_modeset_init+0x60b/0xda0 [i915] .. [ 4.994403] [ 4.994403] -> #1 (&dev->mode_config.mutex){+.+.}: [ 4.994405] lock_acquire+0x9e/0x170 [ 4.994408] __mutex_lock+0x62/0x8c0 [ 4.994413] drm_setup_crtcs+0x17c/0xc50 [drm_kms_helper] [ 4.994418] __drm_fb_helper_initial_config_and_unlock+0x34/0x530 [drm_kms_helper] [ 4.994450] radeon_fbdev_init+0x110/0x130 [radeon] .. [ 4.994535] [ 4.994535] -> #0 (&client->modeset_mutex){+.+.}: [ 4.994537] __lock_acquire+0xa85/0xe90 [ 4.994538] lock_acquire+0x9e/0x170 [ 4.994540] __mutex_lock+0x62/0x8c0 [ 4.994545] drm_fb_helper_pan_display+0x103/0x1f0 [drm_kms_helper] [ 4.994547] fb_pan_display+0x92/0x120 [ 4.994549] bit_update_start+0x1a/0x40 [ 4.994550] fbcon_switch+0x392/0x580 [ 4.994552] redraw_screen+0x12c/0x220 [ 4.994553] do_bind_con_driver.cold.30+0xe1/0x10d [ 4.994554] do_take_over_console+0x113/0x190 [ 4.994555] do_fbcon_takeover+0x58/0xb0 [ 4.994557] notifier_call_chain+0x47/0x70 [ 4.994558] blocking_notifier_call_chain+0x44/0x60 [ 4.994559] register_framebuffer+0x231/0x310 [ 4.994564] __drm_fb_helper_initial_config_and_unlock+0x2fd/0x530 [drm_kms_helper] [ 4.994590] radeon_fbdev_init+0x110/0x130 [radeon] .. This problem was introduced in d81294af drm/fb-helper: Remove drm_fb_helper_crtc Reversing the lock ordering in pan_display_legacy() fixes the issue. Fixes: d81294af ("drm/fb-helper: Remove drm_fb_helper_crtc") Cc: Noralf Trønnes <noralf@tronnes.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Sean Paul <sean@poorly.run> Cc: dri-devel@lists.freedesktop.org Signed-off-by: -
Yannick Fertré authored
These new physical operations are helpful to power_on/off the dsi wrapper. If the dsi wrapper is powered in video mode, the display controller (ltdc) register access will hang when DSI fifos are full. Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Acked-by:
Philippe Cornu <philippe.cornu@st.com> Tested-by:
-
Yannick Fertré authored
Add power on & off optional physical operation functions, helpful to program specific registers of the DSI physical part. Signed-off-by:
-
- 11 Jun, 2019 1 commit
-
-
Douglas Anderson authored
On Rockchip rk3288-based Chromebooks when you do a suspend/resume cycle: 1. You lose the ability to detect an HDMI device being plugged in. 2. If you're using the i2c bus built in to dw_hdmi then it stops working. Let's call the core dw-hdmi's suspend/resume functions to restore things. NOTE: in downstream Chrome OS (based on kernel 3.14) we used the "late/early" versions of suspend/resume because we found that the VOP was sometimes resuming before dw_hdmi and then calling into us before we were fully resumed. For now I have gone back to the normal suspend/resume because I can't reproduce the problems. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
