An error occurred fetching the project authors.
- 21 Jul, 2020 5 commits
-
-
Sean Wang authored
Introduce support for mt7663s 802.11ac 2x2:2 chipset to mt7615 driver. Co-developed-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Felix Fietkau authored
Supports sending a configurable number of packets with a specific rate and configurable tx power levels / antenna settings, as well as displaying rx statistics. Signed-off-by: -
Felix Fietkau authored
Includes debugfs files for testing it. Will be used for testmode support. Signed-off-by: -
Lorenzo Bianconi authored
Introduce U-APSD support in mt76 driver for AP interface Signed-off-by:
-
Sean Wang authored
Introduce ARP filter offload Co-developed-by:
Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Signed-off-by:
Soul Huang <Soul.Huang@mediatek.com> Signed-off-by:
-
- 28 May, 2020 2 commits
-
-
Sean Wang authored
Fix hw_scan with ssid_type for specified SSID only The definition for ssid_type in current firmware is that ssid_type BIT(2) set actually for specified SSID + wildcard SSID. ssid_type BIT(2) and ssid_type_ext BIT(0) both set actually for specified SSID only; Signed-off-by:
-
Lorenzo Bianconi authored
Introduce remain_on_channel support to mt7615 driver if the device is running offload firmware Co-developed-by:
-
- 13 May, 2020 2 commits
-
-
Sean Wang authored
Introduce essential bss information for multiple vifs hw_scan in mt7615_mcu_uni_add_dev adding the interface Signed-off-by:
-
Lorenzo Bianconi authored
Introduce p2p-go/p2p-client suppor to mt76 driver Co-developed-by:
-
- 12 May, 2020 17 commits
-
-
Sean Wang authored
Add support to sched scan with randomise addr Co-developed-by:
-
Lorenzo Bianconi authored
If device has enabled beacon hw filter rx beacons are not reported to the host. Introduce beacon_loss mcu event to trigger mac80211 mlme connection state machine in this configuration. IEEE80211_VIF_BEACON_FILTER has not set in vif flags since hw beacon filter is not enabled yet Co-developed-by:
-
Lorenzo Bianconi authored
Add KCK and KEK offload support to mt7615 driver in order to support GTK rekeying during PM suspend Co-developed-by:
-
Lorenzo Bianconi authored
Introduce WoW support to mt7615 driver. Current supported trigger are: - magic-packet - disconnect - user-pattern Co-developed-by:
-
Sean Wang authored
Introduce the mt7615_mcu_set_hif_suspend mcu command, which is usually used to configure the interface including PCIe, USB or SDIO to the right state during operation suspend / resume. Signed-off-by:
-
Lorenzo Bianconi authored
Introduce support for hw beacon filter if available in the firmware Co-developed-by:
-
Lorenzo Bianconi authored
Add return code parsing for the following unified commands: - MCU_UNI_CMD_DEV_INFO_UPDATE - MCU_UNI_CMD_BSS_INFO_UPDATE - MCU_UNI_CMD_STA_REC_UPDATE Co-developed-by:
-
Lorenzo Bianconi authored
Enable 802.11 power-save support available in mt7663 firmware Co-developed-by:
-
Lorenzo Bianconi authored
Introduce support for mt7663u 802.11ac 2x2:2 chipset to mt7615 driver. Main difference respect to pcie code base is the usb code needs to configure wtbl from non-atomic context Co-developed-by:
-
Felix Fietkau authored
When the EEPROM data is read from flash, it can contain tx DPD calibration data. Add support for sending the data to the firmware. Signed-off-by: -
Felix Fietkau authored
When the EEPROM data is read from flash, it can contain DC offset calibration data. Add support for sending the data to the firmware. Signed-off-by: -
Lorenzo Bianconi authored
Introduce headroom and tailroom to mt76_mcu_ops data structure in order to unify the routine used for mcu message allocation. This is a preliminary patch to add mt7663u support Signed-off-by:
-
Lorenzo Bianconi authored
Introduce rlm tlv header in bss_info mcu command in order to inform the mcu about operating channel. Rlm header is necessary only if the mcu is running low power functionalities (e.g offloaded scan) Co-developed-by:
-
Sean Wang authored
Introduce BSS absence event that is reported when the fw is leaving or entering current operational channel. Signed-off-by:
-
Lorenzo Bianconi authored
Introduce scheduled scan support for mt7663e devices Co-developed-by:
-
Lorenzo Bianconi authored
Introduce hw scan support to mt7663e driver Co-developed-by:
-
Lorenzo Bianconi authored
Introduce mt7615_mcu_set_channel_domain routines in order to instruct the mcu about supported band/channels. This is a preliminary patch to add hw scan support to mt7663e driver Co-developed-by:
-
- 17 Mar, 2020 7 commits
-
-
Lorenzo Bianconi authored
Sobstitute sta_rec_wtbl data structure with tlv one Signed-off-by:
-
Sean Wang authored
Introduce mt7615_mcu_uni_set_bss, mt7615_mcu_uni_set_dev and mt7615_mcu_uni_set_beacon_offload uni mcu commands. This is a preliminary patch to add mt7663e support Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mt7615_mcu_uni_set_bmc and mt7615_mcu_uni_set_sta routines for mt7663e commands. Co-developed-by:
-
Lorenzo Bianconi authored
Introduce mcu uni command type. Uni commands rely on a stripped verions of mt7615_mcu_txd data strutture. Split mt7615_mcu_txd_common and mt7615_mcu_txd. Uni commands will be use by mt7663e driver Co-developed-by:
-
Lorenzo Bianconi authored
Currently fw commands rely on negative cmds since they need different mcu msg metadata. Extend this approach introducing MCU_FW_PREFIX. This is a preliminary patch to support new mt7663e firmware commands Signed-off-by:
-
Lorenzo Bianconi authored
Move mt7615_mcu_set_sta for fw version 1 and version 2 in mt7615_mcu_ops data structure. This is a preliminary patch to properly support mt7663e firmware. Rework utility routines to rely on skb APIs for msg parsing Signed-off-by:
-
Lorenzo Bianconi authored
Introduce mt7615_mcu_ops data structure in order to support multiple mcu ops API. Move mt7615_mcu_set_{tx,rx}_ba to mt7615_mcu_ops differentiating between fw v1 and v2. This is a preliminary patch to properly support mt7663e firmware. Rework utility routines to rely on skb APIs for msg parsing Signed-off-by:
-
- 14 Feb, 2020 6 commits
-
-
Ryder Lee authored
In order to reduce command/event times, newer firmware adds a tag sta_rec_wtbl to take care of WTBL operations. MCU_EXT_CMD_WTBL_UPDATE is deprecated. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
Shayne Chen <shayne.chen@mediatek.com> Tested-by:
-
Felix Fietkau authored
Useful for debugging firmware issues. Can be turned on via the "fw_debug" debugfs file Signed-off-by: -
Felix Fietkau authored
Setting the tx power by manipulating EEPROM may in some cases not be enough, since it only covers the base target power and not per-rate offsets. In other cases, it could limit tx power of rates too much, possibly reducing throughput or range. Use firmware support for applying per-rate limit and power offsets for different values of Nss. Signed-off-by: -
Lorenzo Bianconi authored
Introduce dfs radar pattern specs in mt7615 driver in order to make dfs debugging easier. Radar pulse/pattern thresholds are taken from vendor SDK. Signed-off-by:
-
Felix Fietkau authored
Use the first two WMM slots for the primary phy and the second two for the secondary phy. Signed-off-by: -
Felix Fietkau authored
There are two DFS detectors on the chip. When using 160 MHz channel bandwidth (not supported in dual-wiphy mode), both are used. Otherwise, one detector is used per wiphy. Rework the code to start/stop them separately per phy and to indicate the radar event on the right phy based on the detector index Signed-off-by:
-
- 05 Sep, 2019 1 commit
-
-
Lorenzo Bianconi authored
Introduce debugfs entry to read device temperature and related cmu command. Introduce mt7615_mcu_parse_response to parse mcu response messages and refactor mt7615_mcu_msg_send routine Signed-off-by:
-
