- 02 Apr, 2009 36 commits
-
-
Jan Dumon authored
Add Vendor/Product ID's for new devices. Removed duplicate product ID 0x7361. Signed-off-by:
Jan Dumon <j.dumon@option.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kumar Gala authored
Now that the driver is exclusively an of_platform driver we no longer use the structs and #defines in fsl_devices.h Signed-off-by:
Kumar Gala <galak@kernel.crashing.org> Signed-off-by:
-
Kumar Gala authored
Now that the driver is exclusively an of_platform driver we no longer use the structs and #defines in fsl_devices.h Signed-off-by:
-
Larry Finger authored
On an SMP system, the following message is printed. The patch below gets fixes the problem. ================================= [ INFO: inconsistent lock state ] 2.6.29-Linus-05093-gc31f403 #57 --------------------------------- inconsistent {hardirq-on-W} -> {in-hardirq-W} usage. bash/4105 [HC1[1]:SC0[0]:HE0:SE1] takes: (&kaweth->device_lock){+...}, at: [<ffffffffa01aa286>] kaweth_usb_receive+0x77/0x1af [kaw eth] {hardirq-on-W} state was registered at: [<ffffffff80260503>] __lock_acquire+0x753/0x1685 [<ffffffff8026148a>] lock_acquire+0x55/0x71 [<ffffffff80461ba6>] _spin_lock+0x31/0x3d [<ffffffffa01aaa0c>] kaweth_start_xmit+0x2b/0x1e1 [kaweth] [<ffffffff803eccd3>] dev_hard_start_xmit+0x22e/0x2ad [<ffffffff803fe120>] __qdisc_run+0xf2/0x203 [<ffffffff803ed0cd>] dev_queue_xmit+0x263/0x39b [<ffffffffa03a47cb>] packet_sendmsg_spkt+0x1c4/0x20a [af_packet] [<ffffffff803de0c2>] sock_sendmsg+0xe4/0xfd [<ffffffff803dec8f>] sys_sendto+0xe4/0x10c [<ffffffff8020bccb>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff irq event stamp: 1280 hardirqs last enabled at (1279): [<ffffffff80461a71>] _spin_unlock_irqrestore+0x44/0x4c hardirqs last disabled at (1280): [<ffffffff8020bad7>] save_args+0x67/0x70 softirqs last enabled at (660): [<ffffffff8024192c>] __do_softirq+0x14d/0x15d softirqs last disabled at (651): [<ffffffff8020ce9c>] call_softirq+0x1c/0x28 Signed-off-by:Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Stephen Hemminger authored
GRO assumes that there is a one-to-one relationship between NAPI structure and network device. Some devices like sky2 share multiple devices on a single interrupt so only have one NAPI handler. Rather than split GRO from NAPI, just have GRO assume if device changes that it is a different flow. Signed-off-by:
Stephen Hemminger <shemminger@vyatta.com> Signed-off-by:
-
Karsten Wiese authored
Original comment (Karsten): On a MSI MS-6702E mainboard, when in rtl8169_init_one() for the first time after BIOS has run, IntrStatus reads 5 after chip has been reset. IntrStatus should equal 0 there, so patch changes IntrStatus reset to happen after chip reset instead of before. Remark (Francois): Assuming that the loglevel of the driver is increased above NETIF_MSG_INTR, the bug reveals itself with a typical "interrupt 0025 in poll" message at startup. In retrospect, the message should had been read as an hint of an unexpected hardware state several months ago :o( Fixes (at least part of) https://bugzilla.redhat.com/show_bug.cgi?id=460747Signed-off-by:
Karsten Wiese <fzu@wemgehoertderstaat.de> Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Tested-by:
Josep <josep.puigdemont@gmail.com> Signed-off-by:
-
Mallikarjuna R Chilakala authored
While setting up the ring parameters using ethtool the driver can panic or leak memory as ixgbe_open tries to setup tx & rx resources. The updated logic will use ixgbe_down/up after successful allocation of tx & rx resources Signed-off-by:
Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by:
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: stable@kernel.org Signed-off-by:
-
Don Skidmore authored
We were basicly ignoring ethtool users request for FC autoneg and replying to queries with a "best guess". This patch enables the driver to store if we want to enable/disable autoneg FC and do the correct behavior. Signed-off-by:
Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by:
-
Mallikarjuna R Chilakala authored
When network interface is made active we were not handling the error scenarios properly to clean up rx & tx resources which might result in a driver panic. Signed-off-by:
-
Alexander Duyck authored
This patch resolves an issue with map single being used to map a buffer and then unmap page being used to unmap it. In addition it handles any error conditions that may be detected using skb_dma_map. Signed-off-by:
Alexander Duyck <alexander.h.duyck@intel.com> Acked-by:
-
PJ Waskiewicz authored
MSI-X allocation broke after the 82599 merge on systems with more than 8 CPU cores. 82598 drops back into MSI mode, which isn't sufficient to run full, efficient 10G line rate. Signed-off-by:
-
Don Skidmore authored
In the past flow control wasn't enabled by default under the incorrect assumption that this opened up us to a denial of service attack. However since any switch that forwarded flow control would be extremely msiconfigured and/or buggy, this concern no longer out weighs the preformance gains from having FC enabled. Signed-off-by:
-
PJ Waskiewicz authored
The priority flow control settings from the netlink layer aren't taking effect in the base driver. The boolean pfc_mode_enable in the dcb_config struct isn't being set, so the hardware configuration code is never reached. Signed-off-by:
-
Don Skidmore authored
Ethtool tries to get advertised speed from phy.autoneg_advertised. However for copper media this wasn't happening until later do to an other fix which moved mac.ops.setup_link_speed placement in ixgbe_link_config(). This patch will display the default advertised speeds if it can't yet get this information from phy.autoneg_advertised. Signed-off-by:
-
Alexander Duyck authored
The ixgbe driver had issues when DEBUG was defined because the hw_dbg macro was incomplete. This patch completes the code based off of the code that already existed in the igb module. Signed-off-by:
-
Rafael J. Wysocki authored
Impact: Fix Yinghai Lu found one system with 82575EB where, in the kernel that is kexeced, probe igb failed with -2, the reason being that the adapter could not be brought back from D3 by the kexec kernel, most probably due to quirky hardware (it looks like the same behavior happened on forcedeth). Prevent igb from putting the adapter into D3 during shutdown except when we going to power off the system. For this purpose, seperate igb_shutdown() from igb_suspend() and use the appropriate PCI PM callbacks in both of them. Signed-off-by:
"Rafael J. Wysocki" <rjw@sisk.pl> Reported-by:
Yinghai Lu <yinghai@kernel.org> Signed-off-by:
-
Alexander Duyck authored
The code path for setting up phy loopback testing was out of date and was setting bits it didn't need to. This change cleans up the code path and removes some code that has no effect on teh driver. Signed-off-by:
-
Alexander Duyck authored
Increase the delay for copper phy init from 15ms to 100ms. This is to address issues seen in which ethtool -t was failing in some cases on 82576 based adapters. Signed-off-by:
-
Alexander Duyck authored
An issue was seen on suspend in which the system reported a page fault. This was due to the new reg_idx code being called after the queues were freed. This update prevents any for loops from going through the queues by setting the number of queues to 0 when they are freed. Signed-off-by:
-
Alexander Duyck authored
When device is on PCIe link trained as x2 the driver is currently reporting link width as "unknown". The original patch provided by Myron adds the x2 link support and my changes are cosmetic to clean up the readability of the conditional operators. Based on work by: Myron Stowe <myron.stowe@hp.com> Signed-off-by:
-
Grant Likely authored
The FEC Ethernet device isn't always attached to a phy. Be careful not to dereference phy_device if it is NULL. Also eliminates an unnecessary extra function from the ioctl path. Reported-by:
Henk Stegeman <henk.stegeman@gmail.com> Signed-off-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
Henk Stegeman authored
Since not using net_device_ops gets you shunned out the cool crowd, this patch modifies the fec_mpc52xx Ethernet driver to provide the management hooks via a struct net_device_ops. Reported-by:
-
Grant Likely authored
The driver triggers a BUG_ON() when allocating DMA buffers because the arch/powerpc dma_ops aren't in the net_device's struct device. This patch fixes the problem by using the parent of_device which does have the correct dma_ops set. Signed-off-by:
Becky Bruce <beckyb@kernel.crashing.org> Signed-off-by:
-
Eric Dumazet authored
Commit 78454473 (netfilter: iptables: lock free counters) forgot to disable BH in arpt_do_table(), ipt_do_table() and ip6t_do_table() Use rcu_read_lock_bh() instead of rcu_read_lock() cures the problem. Reported-and-bisected-by:
Roman Mindalev <r000n@r000n.net> Signed-off-by:
Eric Dumazet <dada1@cosmosbay.com> Acked-by:
Patrick McHardy <kaber@trash.net> Acked-by:
-
Andy Grover authored
We have a 64bit value that needs to be set atomically. This is easy and quick on all 64bit archs, and can also be done on x86/32 with set_64bit() (uses cmpxchg8b). However other 32b archs don't have this. I actually changed this to the current state in preparation for mainline because the old way (using a spinlock on 32b) resulted in unsightly #ifdefs in the code. But obviously, being correct takes precedence. Signed-off-by:
Andy Grover <andy.grover@oracle.com> Signed-off-by:
-
Andy Grover authored
This fixes a bug where a connection was unexpectedly not on *any* list while being destroyed. It also cleans up some code duplication and regularizes some function names. * Grab appropriate lock in conn_free() and explain in comment * Ensure via locking that a conn is never not on either a dev's list or the nodev list * Add rds_xx_remove_conn() to match rds_xx_add_conn() * Make rds_xx_add_conn() return void * Rename remove_{,nodev_}conns() to destroy_{,nodev_}conns() and unify their implementation in a helper function * Document lock ordering as nodev conn_lock before dev_conn_lock Reported-by:Yosef Etigin <yosefe@voltaire.com> Signed-off-by:
-
Andy Grover authored
rs_send_drop_to() is called during socket close. If it takes m_rs_lock without disabling interrupts, then rds_send_remove_from_sock() can run from the rx completion handler and thus deadlock. Signed-off-by:
-
Ramkrishna Vepa authored
- Kconfig and Makefile related changes for vxge driver. - No changes in current submission. - Changes from previous submission - - Incorporated the following review comments as per Bill Flink: - Add dependancy on INET along with PCI - Remove dependancy on INET_LRO and add GRO support. - Made this patch as last patch as per Ben Hutchings comments. Signed-off-by:Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by:
Rastapur Santosh <santosh.rastapur@neterion.com> Signed-off-by:
Ramkrishna Vepa <ram.vepa@neterion.com> Signed-off-by:
-
Ramkrishna Vepa authored
- Driver version - Changes from previous submission - - Updated driver version. Signed-off-by:
-
Ramkrishna Vepa authored
This patch implements all ethtool related entry point functions for the driver. - Changes in this submission - - Removed redundant #include statements - Changes in previous submissions - - Removed unused statistics. - General clean up - removed unused variables and macros. - Incorporated following comments from Ben Hutchings - No need to restart the interface in vxge_ethtool_sset - Do not use #ifdef ADVERTISED_XX - Remove unnecessart intermediate copy in vxge_ethtool_gdrvinfo - Use strlcpy() to ensure null-termination. - Use ethtool_op_get_tso, ethtool_op_set_tx_hw_csum instead of redefining the same code. - Implement get_strings_count instead of deprecated get_stats_count. - Don't report reporting the EEPROM length as we don't supprt get/set eeprom. - Don't set self_test_count as we don't support any self tests. Signed-off-by: -
Ramkrishna Vepa authored
This patch implements all the driver entry point functions. - Definition of all module loadable paramters. - Implementation of all driver entry point functions. - Changes in this submission - - Fixed compilation error when enabling debug statements - Fixed few warnings when CONFIG_PCI_MSI is not defined - Removed unnecessary volatile variables - Removed compare_ether_addr as it causes unaligned memory access on the sparc64 platform. - Changes in previous submissions - - As per Stephen Hemminger's comments removed the following loadable parameters - gro, rx_& tx max_indicate_pkts, exec_mode, rx & tx pause_enable, tx_steering_type and intr_type. - Added Device ID definition in vxge-main.h instead of include/linux/pci_ids.h file - Reported by David Miller - Incorporated following review comments from Ben Hutchings - NAPI is always enabled (no option to turn it OFF). - Loadable parameters rx_steering_type: This loadable option is removed. ring_blocks: This loadable option is removed. The driver default settings work well in most if not all cases. Another patch to configure these parameters with ethtool will be released in the future. - LRO has been deprecated in favour of GRO - Bill Fink & Dave Miller's comment - Fixed sparse warnings - Reported by Andi Kleen - Removed unused variables Signed-off-by: -
Ramkrishna Vepa authored
This patch takes care of trafic handling related APIS. - Interrupt Enable and disable - Mask / Unmask Interrupt - Traffic Interrupt handling. - Alarm Interrupt handling. - Changes in this submission - - General clean up - removed redundant includes, defines and macros. - Changes in previous submissions - - General cleanup - removed unused functions and variables. - Use asserts where necessary - Reported by Andi Kleen - Fixed sparse warnings - Reported by Andi Kleen - Use a prefix, "__vxge" in front of hw functions to make them globally unique - Ben Hutchings Signed-off-by: -
Ramkrishna Vepa authored
This patch takes care of Initialization and configuration steps of Neterion Inc's X3100 Series 10GbE PCIe I/O Virtualized Server Adapter. - Device Initialization. - Verification and setting of device config parameters. - Allocation of Tx FIFO and Rx Ring descriptors (DTR). - APIs to get various type of hw stats - APIs to configure RTS (Receive Traffic Steering) - Changes in this submission - - Include vmalloc header without which a compilation error occured on sparc64, ppc64 and IA64 plaforms. - Fixed compilation warning in register_poll, write32_upper, write32_lower and the special write64 functions on ppc64. - General cleanup - removed redundant includes and defines. - Changes in previous submissions - - Add readq/writeq implementation for the driver for 32 bit systems - reported by Dave Miller. - Incorporated following comments from Ben Hutchings - Start a comment with "/**" to make it a kernel-doc comment. - Use prefix, "__vxge" in front of hw functions to make them globally unique. - Fixed unnecessary clearing members of *channel just before freeing - Use backslashes only for macro definitions and not in multi-line statements. - Used pci_find_capability instead of redefining it. - Used device and revision ids that are already in pdev - no need to read them again. - Used pci_save_state() and pci_restore_state() around resets. - Used udelay and mdelay directly instead of wrapper. - In __vxge_hw_device_register_poll() reset i to 0 after the microsecond delay loop to commence the millisecond delay loop. - Corrected spelling "sapper" - should be "swapper" - Remove too much vertical whitespace. - Replaced magic numbers with appropriate macros - Incorporated following comments from Andi Kleen [andi@firstfloor.org] - Reduced the arguments in functions or refactored them into smaller functions. - Allocate page sized memories used in slow path with vmalloc. - Use asserts where necessary. - Use macros instead of magic numbers. - Use the pci layer code instead of defining own functions - Remove driver wrappers such as xge_hw_device_private_set(). - Fixed sparse warnings. Signed-off-by: -
Ramkrishna Vepa authored
- Complete Register map details of Neterion Inc's X3100 Series 10GbE PCIe I/O Virtualized Server Adapter. - No change from previous submission. - Changes in previous submissions - - Incorporated following comments from Ben Hutchings - Use original macros for endian checks - Remove VXGE_OS_PLATFORM_* macros as they are unused. - Converted multiple bVALX macros into single with additional width parameter and renamed it to vxge_bVALn. - Using __packed instead of pragma pack(1) - Added a comment of the use of a hw swapper so driver code is portable (does not have to change the byte order for register access as well as dma operations) on different ENDIAN platforms. - Using the <linux/pci_regs.h> definitions instead of redefing them. - Using the PCI capabilities registers in <linux/pci_regs.h> instead of redefing them. Signed-off-by: -
Ramkrishna Vepa authored
- update to Maintainer list of S2IO 10GbE drivers (xframe/vxge). Signed-off-by:
-
Ramkrishna Vepa authored
- vxge driver help text file. - No change from previous submission. - Changes in previous submissions - Removed the performance tuning section with instructions to disable time stamps and change sysctl settings - Reported by Dave Miller General clean up. - Removed tx/rx_pause, exec_mode, tx_steering_type, rx_steering_type, gro, intr_type, rx & tx max_indicate_pkts and exec_mode loadable parameters. The driver default settings work well in most if not all cases. Another patch to configure these parameters with ethtool will be released in the future - Reported by Stephen Hemminger. - Incorporated following fixes based on comments from Ben Hutchings Removed references to earlier kernel versions. Removed sections that are similar for all drivers - Load/Unload Identifying the adapter/interface Boot time configuration Removed loadable parameter - NAPI - Napi is always enabled. rx_steering_type & ring_blocks - The driver default settings work well in most if not all cases. Another patch to configure these parameters with ethtool will be released in the future. Removed ethtool support section - No need to duplicate ethtool docs here. Removed Known Issue on SUSE 9 - Doesn't apply when using a current kernel. Removed Common Problems section - These don't apply to in-tree modules. Removed Available Downloads section - Not sure this belongs in-tree. Removed Copyright information - This notice doesn't belong in the kernel. Signed-off-by:
-
- 31 Mar, 2009 4 commits
-
-
Ben Hutchings authored
If we use a shared legacy IRQ then our interrupt handler may be called as soon as it is registered even though IRQs are disabled on the NIC. Now that the legacy interrupt handler also checks for event delivery, it may decide to schedule polling in this case. Ensure that the NAPI context is valid but disabled at this point. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Wei Yongjun authored
Remove pointless conditional before kfree(). Signed-off-by:
Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by:
-
-
Rami Rosen authored
Signed-off-by:
Rami Rosen <ramirose@gmail.com> Signed-off-by:
-
