- 18 Dec, 2013 25 commits
-
-
Dinesh Ram authored
Hans Verkuil <hverkuil@xs4all.nl> will maintain the USB driver for si4713 Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Dinesh Ram authored
This is the USB driver for the Silicon Labs development board. It contains the Si4713 FM transmitter chip. Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Dinesh Ram authored
The Si4713 development board contains a Si4713 FM transmitter chip and is handled by the radio-usb-si4713 driver. The board reports itself as (10c4:8244) Cygnal Integrated Products, Inc. and misidentifies itself as a HID device in its USB interface descriptor. This patch ignores this device as an HID device and hence loads the custom driver. Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Dinesh Ram authored
In the si4713_tx_tune_power() method, the args array element 'power' can take values between SI4713_MIN_POWER and SI4713_MAX_POWER. power = 0 is also valid. All the values (0 > power < SI4713_MIN_POWER) are illegal and hence are all mapped to SI4713_MIN_POWER. Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Dinesh Ram authored
Moved the header <linux/regulator/consumer.h> from si4713.c to si4713.h Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Dinesh Ram authored
Checks have been introduced at several places in the code to test if an interrupt is set or not. For devices which do not use the interrupt, to get a valid response, within a specified timeout, the device is polled instead. Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Dinesh Ram authored
Added a new si4713 directory which will contain all si4713 related files. Also updated Makefile and Kconfig Signed-off-by: Dinesh Ram <dinesh.ram@cern.ch> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Eduardo Valentin <edubezval@gmail.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Lisa Nguyen authored
Rewrite the return statement in vpfe_video.c. This will prevent the checkpatch.pl script from generating a warning saying to remove () from this particular return statement. Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Lisa Nguyen authored
Remove unnecessary spaces before semicolons to meet kernel coding style. Signed-off-by: Lisa Nguyen <lisa@xenapiadmin.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The v4l2_of_get_remote_port() function acquires a reference to an endpoint node through a phandle and then returns the node's parent, without dropping the reference to the endpoint node. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The field isn't set when parsing the endpoint. Remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
When CONFIG_OF is not defined the v4l2_of_parse_endpoint() function is defined as a stub that returns -ENOSYS. Make the real function return an integer as well to be able to differentiate between the two cases. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
A missing break resulted in all done buffers being flagged with V4L2_BUF_FLAG_QUEUED. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
Replace devm_request_mem_region() and devm_ioremap_nocache() with devm_ioremap_resource(). The behaviour remains the same and the code is simplified. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sylwester Nawrocki authored
The clock core code is going to be modified so clk_get() takes reference on the clock provider module. Until the potential circular reference issue is properly addressed, we pass NULL as the first argument to clk_register(), in order to disallow sub-devices taking a reference on the ISP module back trough clk_get(). This should prevent locking the modules in memory. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Jacek Anaszewski authored
This patch adds proper initialization of the in-driver cached state of JPEG controls with V4L2 core. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Jacek Anaszewski authored
s5p_jpeg_device_run and s5p_jpeg_runtime_resume callbacks should have spin_lock protection as they alter device registers. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Jacek Anaszewski authored
Standard suspend/resume path is called after runtime resume of the given device, so suspend/resume callbacks must do all clock management done also by runtime pm to allow for proper power domain shutdown. Moreover, JPEG clock is enabled from probe function but is is not necessary. This patch also moves control of jpeg clock to runtime_pm callbacks. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Jacek Anaszewski authored
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Jacek Anaszewski authored
Aligning capture queue image dimensions while enqueuing output queue doesn't make a sense as the S_FMT ioctl might have not been called for the capture queue until that moment, whereas it is required to know capture format as the type of alignment heavily depends on it. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Jacek Anaszewski authored
The aim of the condition is ensuring that the bytesperline value set by the user space application is proper for the given format and adjusting it if isn't. As the depth value of the format description entry is expressed in bits then the bytesperline value needs to be divided, not multiplied, by that value to get the number of bytes required to store single line of image samples. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Jacek Anaszewski authored
Output samples during decoding phase for the YUV 4:2:0 format are arranged in the manner compatible with 2-planar NV12, not 3-planar YUV420 fourcc. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Jacek Anaszewski authored
Reorder quantization tables so that their elements are arranged in the manner reflecting compression quality level that is in accordance with V4L2 documentation, i.e. the larger value of the V4L2_CID_JPEG_COMPRESSION_QUALITY control the better image quality, and thus lower compression quality. The modification allows also to get rid of reverse logic in the s_ctrl callback while assigning user space value to the ctx->compr_quality variable. Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Sylwester Nawrocki authored
This patch enables the JPEG codec on S5PV210 and Exynos4210 SoCs. There are some differences in newer versions of the JPEG codec IP on SoCs like Exynos4x12 and Exynos5 series and support for them will be added in subsequent patches. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Seung-Woo Kim authored
It is hard to distinguish between decoder and encoder video device because their names are same. So this patch fixes the names. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
- 13 Dec, 2013 1 commit
-
-
Mauro Carvalho Chehab authored
Merge the media fixes merged upstream for v3.13-rc4 * upstream-fixes: (30 commits) [media] videobuf2-dma-sg: fix possible memory leak [media] vb2: regression fix: always set length field. [media] mt9p031: Include linux/of.h header [media] rtl2830: add parent for I2C adapter [media] media: marvell-ccic: use devm to release clk [media] ths7303: Declare as static a private function [media] em28xx-video: Swap release order to avoid lock nesting [media] usbtv: Add support for PAL video source [media] media_tree: Fix spelling errors [media] videobuf2: Add support for file access mode flags for DMABUF exporting [media] radio-shark2: Mark shark_resume_leds() inline to kill compiler warning [media] radio-shark: Mark shark_resume_leds() inline to kill compiler warning [media] af9035: unlock on error in af9035_i2c_master_xfer() [media] af9033: fix broken I2C [media] v4l: omap3isp: Don't check for missing get_fmt op on remote subdev [media] af9035: fix broken I2C and USB I/O [media] wm8775: fix broken audio routing [media] marvell-ccic: drop resource free in driver remove [media] tef6862/radio-tea5764: actually assign clamp result [media] cx231xx: use after free on error path in probe ...
-
- 11 Dec, 2013 14 commits
-
-
Laurent Pinchart authored
The Look-Up Table looks up values in 8-bit indexed tables separately for each color component. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The Super Resolution Unit performs super resolution processing with optional upscaling by a factor of two. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The Hue Saturation value Transform and Hue Saturation value Inverse transform entities convert from RGB to HSV and back. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
Implement the get and set selection operations on the RPF and WPF entities. Only the crop targets are currently available. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
When operating in DU output mode (deep pipeline to the DU through the LIF), the VSP1 needs to constantly supply frames to the display. To ensure reuse the last queued buffer instead of returning it to the user. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The MT9V034 sensor is very similar to the MT9V032, with a couple of different registers and parameters. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
To prepare support of the MT9V034, add the necessary infrastructure to support model-specific parameters. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
Identify the model based on the I2C device name and configure formats accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The sensor can scale the image down using binning by 1, 2 or 4 in both directions. Update size enumeration and ratio and binning factor computation accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The active pixel array size is 753x481 with 4 additional black rows at the top. Fix the driver accordingly. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The EXT_CLK macro is unused, remove it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
The comment explaining the usage of the bypass bit is wrong, fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-
Laurent Pinchart authored
When a fatal error that prevents any further video streaming occurs in a pipeline, all queued buffers must be marked as erroneous and new buffers must be prevented from being queued. Implement this behaviour with a new omap4iss_pipeline_cancel_stream() function that can be used by submodules to cancel streaming. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
-