The changeset ba300204 added a logic at the core to fill
the format description, however, a break is missing on one of
the formats, as reported by smatch:
	drivers/media/v4l2-core/v4l2-ioctl.c:1211 v4l_fill_fmtdesc() warn: missing break? reassigning 'descr'
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The descriptions used in drivers for the formats returned with ENUM_FMT
are all over the place.

So instead allow the core to fill them in if the driver didn't. This
allows drivers to drop the description and flags.

Based on an earlier patch from Philipp Zabel:
http://comments.gmane.org/gmane.linux.drivers.video-input-infrastructure/81411Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

As reported by smatch:
drivers/media/platform/m2m-deinterlace.c:1063 deinterlace_probe() info: ignoring unreachable code.

There's no need to call v4l2_m2m_release() here, as the last possible
failure in this code is to allocate the m2m struct.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/cx23885/altera-ci.c:762 altera_ci_init() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/platform/vivid/vivid-vid-out.c:1155 vivid_vid_out_g_parm() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/gspca/xirlink_cit.c:1776 cit_start_model2() info: ignoring unreachable code.
drivers/media/usb/gspca/xirlink_cit.c:1858 cit_start_model2() info: ignoring unreachable code.
drivers/media/usb/gspca/xirlink_cit.c:1910 cit_start_model2() info: ignoring unreachable code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/dvb-usb/dw2102.c:440 dw2104_i2c_transfer() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/dvb-usb/af9005-fe.c:484 af9005_fe_read_status() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/dvb-usb/dib0700_devices.c:864 dib7770_set_param_override() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/saa7134/saa7134-dvb.c:1682 dvb_init() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/usbvision/usbvision-core.c:2395 usbvision_init_isoc() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/platform/s5p-mfc/s5p_mfc_opr_v5.c:187 s5p_mfc_alloc_codec_buffers_v5() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/ttusb-dec/ttusb_dec.c:1434 ttusb_dec_init_stb() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

as reported by smatch:
	drivers/media/pci/bt8xx/bttv-audio-hook.c:201 lt9415_audio() warn: bitwise AND condition is false here
	drivers/media/pci/bt8xx/bttv-audio-hook.c:241 winfast2000_audio() warn: bitwise AND condition is false here
	drivers/media/pci/bt8xx/bttv-audio-hook.c:276 pvbt878p9b_audio() warn: bitwise AND condition is false here
	drivers/media/pci/bt8xx/bttv-audio-hook.c:307 fv2000s_audio() warn: bitwise AND condition is false here
	drivers/media/pci/bt8xx/bttv-audio-hook.c:334 windvr_audio() warn: bitwise AND condition is false here
	drivers/media/pci/bt8xx/bttv-audio-hook.c:371 adtvk503_audio() warn: bitwise AND condition is false here

there are some serious issues at the audio hook implementation.

They're not following what's specified at the DocBook:
	http://linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-tuner.html#tuner-audmode

Basically, it was assuming that the audmode (V4L2_TUNER_MODE_foo)
is a variable with a bit maskk. However, it isn't.

The bitmask only applies to rxsubchans field (V4L2_TUNER_SUB_foo).

As the code is also too complex, and not all hooks were returning
both audmode and rxsubchans to a VIDIOC_G_TUNER, rewrite the
functions, in order to fix both for get and set tuner ioctls.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/dvb-frontends/tda10086.c:476 tda10086_get_frontend() warn: should 'tda10086_read_byte(state, 81) << 8' be a 64 bit type?
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/dvb-frontends/s5h1420.c:565 s5h1420_setfec_inversion() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/dvb-frontends/stv0900_sw.c:1559 stv0900_search_srate_fine() warn: inconsistent indenting
drivers/media/dvb-frontends/stv0900_sw.c:2012 stv0900_algo() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/i2c/cx25840/cx25840-core.c:974 input_change() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

smatch complains about multiple issues here:
	drivers/media/usb/pvrusb2/pvrusb2-context.c:402 pvr2_channel_claim_stream() warn: inconsistent indenting
	drivers/media/usb/pvrusb2/pvrusb2-ioread.c:240 pvr2_ioread_setup() warn: inconsistent indenting
	drivers/media/usb/pvrusb2/pvrusb2-ioread.c:255 pvr2_ioread_set_enabled() warn: inconsistent indenting
	drivers/media/usb/pvrusb2/pvrusb2-ioread.c:485 pvr2_ioread_read() warn: inconsistent indenting
	drivers/media/usb/pvrusb2/pvrusb2-io.c:522 pvr2_stream_set_callback() warn: inconsistent indenting
	drivers/media/usb/pvrusb2/pvrusb2-io.c:561 pvr2_stream_set_buffer_count() warn: inconsistent indenting
	drivers/media/usb/pvrusb2/pvrusb2-io.c:640 pvr2_buffer_queue() warn: inconsistent indenting
	drivers/media/usb/pvrusb2/pvrusb2-io.c:667 pvr2_buffer_set_buffer() warn: inconsistent indenting
	drivers/media/usb/pvrusb2/pvrusb2-io.c:668 pvr2_buffer_set_buffer() warn: inconsistent indenting
	drivers/media/usb/pvrusb2/pvrusb2-hdw.c:2614 pvr2_hdw_create() warn: inconsistent indenting
	drivers/media/usb/pvrusb2/pvrusb2-hdw.c:2740 pvr2_hdw_destroy() warn: inconsistent indenting
	drivers/media/usb/pvrusb2/pvrusb2-hdw.c:3353 pvr2_hdw_trigger_module_log() warn: inconsistent indenting

Let's get rid of those, in order to cleanup as much as possible the smatch error log.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/gspca/stk014.c:279 sd_start() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/gspca/sonixj.c:1792 expo_adjust() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

redrat3_send_cmd() can return an error or the read data. However,
it currently returns an u8, as reported by smatch:
	drivers/media/rc/redrat3.c:416 redrat3_send_cmd() warn: signedness bug returning '(-12)'
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

Since the first version of this driver, the remote controller
code is disabled, adding an early return inside vp702x_rc_query().

Let's disable the code with #if 0, to remove this warning:

drivers/media/usb/dvb-usb/vp702x.c:268 vp702x_rc_query() info: ignoring unreachable code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/go7007/go7007-usb.c:1099 go7007_usb_probe() info: ignoring unreachable code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The indentation on this driver were deadly broken. On lots
of places, it was using 4 spaces instead of tab to indent.
On other parts, it were using tabs.

Also, on several places, it were not even being properly aligned,
as reported by smatch:
	drivers/media/dvb-frontends/dib0070.c:179 dib0070_set_bandwidth() warn: inconsistent indenting
	drivers/media/dvb-frontends/dib0070.c:198 dib0070_captrim() warn: inconsistent indenting
	drivers/media/dvb-frontends/dib0070.c:246 dib0070_set_ctrl_lo5() warn: inconsistent indenting
	drivers/media/dvb-frontends/dib0070.c:260 dib0070_ctrl_agc_filter() warn: inconsistent indenting
	drivers/media/dvb-frontends/dib0070.c:494 dib0070_tune_digital() warn: inconsistent indenting
	drivers/media/dvb-frontends/dib0070.c:498 dib0070_tune_digital() warn: inconsistent indenting
	drivers/media/dvb-frontends/dib0070.c:655 dib0070_reset() warn: inconsistent indenting
	drivers/media/dvb-frontends/dib0070.c:711 dib0070_reset() warn: curly braces intended?
	drivers/media/dvb-frontends/dib0070.c:713 dib0070_reset() warn: inconsistent indenting

My first idea were to leave it as-is or to just touch the above.

However, this won't be fixing anything. So, as painful as it
is, let's fix indentation globally on the driver, and then
address the inconsistencies.

Hopefully, this driver doesn't have much patches, so it likely
won't conflict to any other patch during this merge window.

Besides the big size of this patch, no functional changes
were done.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/dvb-frontends/dib3000mc.c:149 dib3000mc_setup_pwm_state() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/cx231xx/cx231xx-avcore.c:1598 cx231xx_set_DIF_bandpass() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:656 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:659 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:664 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:669 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-core.c:673 cx231xx_demod_reset() warn: inconsistent indenting
drivers/media/usb/cx231xx/cx231xx-417.c:1164 cx231xx_initialize_codec() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

ov7670_s_exp() checks read error for 2 registers: REG_COM1
and REG_COM8. But, although it uses the value latter, it
doesn't check errors on REG_AECHH read. Yet, as it is doing
a bitmask operation there, the read operation should succeed.

So, fix the code to also check if this succeeded.

This fixes this smatch report:
	drivers/media/i2c/ov7670.c:1366 ov7670_s_exp() warn: inconsistent indenting

Compile-tested only.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/dvb-frontends/stv0297.c:140 stv0297_get_symbolrate() warn: should 'stv0297_readreg(state, 86) << 8' be a 64 bit type?
drivers/media/dvb-frontends/stv0297.c:141 stv0297_get_symbolrate() warn: should 'stv0297_readreg(state, 87) << 16' be a 64 bit type?
drivers/media/dvb-frontends/stv0297.c:142 stv0297_get_symbolrate() warn: should 'stv0297_readreg(state, 88) << 24' be a 64 bit type?
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/dvb-frontends/zl10353.c:536 zl10353_read_ucblocks() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/bt8xx/bttv-driver.c:2679 bttv_s_fbuf() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/tuners/r820t.c:945 r820t_sysfreq_sel() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/dvb-frontends/tda1004x.c:653 tda10046_init() warn: inconsistent indenting
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/pci/mantis/mantis_cards.c:229 mantis_pci_probe() info: ignoring unreachable code.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

As reported by smatch:
	drivers/media/tuners/qt1010.c:357 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34

This should not happen with the current code, as the i2c_data array
doesn't end with a QT1010_M1, but it doesn't hurt add a BUG_ON
to notify if one modifies it and breaks.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/platform/vivid/vivid-radio-rx.c:198 vivid_radio_rx_s_hw_freq_seek() error: buffer overflow 'vivid_radio_bands' 3 <= 3
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

As reported by smatch:
	drivers/media/usb/gspca/zc3xx.c:5994 transfer_update() info: ignoring unreachable code.

That happens because there's a return that it is never called,
as the work queue runs an infinite loop, except when the device is
put to sleep or an error happens.

When an error happens, a break statement is enough to go out of
the loop. So, let's remove the goto, as break is the typical
instruction used to end a loop.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

drivers/media/usb/gspca/zc3xx.c:6363 zcxx_s_ctrl() error: buffer overflow 'jpeg_qual' 3 <= 3
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

The maximum size for a DiSEqC command is 6, according to the
userspace API. However, the code allows to write up much more values:
	drivers/media/dvb-frontends/cx24116.c:983 cx24116_send_diseqc_msg() error: buffer overflow 'd->msg' 6 <= 23

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>

If userspace sends an invalid bandwidth, it should either return
EINVAL or switch to auto mode.

This driver will go past an array and program the hardware on a
wrong way if this happens.

Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>