- 06 Nov, 2013 40 commits
-
-
Jakob Bornecrantz authored
Fix the case where the ttm pointer may be NULL causing a NULL pointer dereference. Signed-off-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
Thomas Hellström <thellstrom@vmware.com> Cc: stable@vger.kernel.org
-
Thomas Hellstrom authored
NO_EVICT bos that are not idle when all references are dropped are put on the delayed destroy list. However, since they are not on LRU lists, they are not available to shrinkers at that point, and buffers on the delayed destroy list are not checked very often for idle. So when these buffers are put on the delayed destroy list, clear the NO_EVICT flag and put them on the right LRU list. This way they are immediately available for eviction or shrinkers and will not cause false OOMS. Signed-off-by:
-
Thomas Hellstrom authored
Make use of the FAULT_FLAG_ALLOW_RETRY flag to allow dropping the mmap_sem while waiting for bo idle. FAULT_FLAG_ALLOW_RETRY appears to be primarily designed for disk waits but should work just as fine for GPU waits.. Signed-off-by:
-
Dave Airlie authored
So GNOME userspace has an issue with when it rescans for modes on hotplug events, if the monitor has no EDID it assumes that nothing has changed on EDID as with real hw we'd never have new modes without a new EDID, and they kind off rely on the behaviour now, however with virtual GPUs we would like to rescan the modes and get a new preferred mode on hotplug events to handle dynamic guest resizing (where you resize the host window and the guest resizes with it). This is a simple property we can make userspace watch for to trigger new behaviour based on it, and can be used to replaced EDID hacks in virtual drivers. Acked-by: Marc-André Lureau <marcandre.lureau@gmail.com> (on irc) Signed-off-by:Dave Airlie <airlied@redhat.com>
-
David Herrmann authored
Instead of freeing minors in drm_dev_unregister(), we only unplug them and delay the free to drm_dev_free(). Note that if drm_dev_register() has never been called, minors are NULL and this has no effect. This change is needed to allow early device unregistration. If we want to call drm_dev_unregister() on live devices, we need to guarantee that minors are still valid (but unplugged). This way, any open file can still access file_priv->minor->dev to get the DRM device. However, the minor is unplugged so no new users can occur. Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
David Herrmann authored
Don't delay minor removal to drm_put_minor(). Otherwise, user-space can still open the minor and cause the kernel to oops. Instead, remove the minor during unplug so any new open() will fail to access this minor. Note that open() and drm_unplug_minor() are both protected by the global DRM mutex so we're fine. Signed-off-by:
-
David Herrmann authored
There is no reason to delay debugfs-cleanup to drm_put_minor(). We should forbid any access to debugfs files once the device is dead. Chances they oops once a card was unplugged are very high, anyway. Signed-off-by:
-
David Herrmann authored
drm_get_minor() is only used in one file. Make it static and add a kernel-doc comment which documents the current semantics. Signed-off-by:
-
David Herrmann authored
Allow passing NULL as minor to simplify DRM destruction paths. Also remove the double-pointer reset as it is no longer needed. drm_put_minor() is only called when the underlying object is destroyed. Hence, resetting minors to NULL is not necessary. As drm_put_minor() is no longer used by other DRM files, we can make it static, too. Signed-off-by:
-
David Herrmann authored
This protects drm_unplug_minor() against repeated calls so we can use it in drm_put_minor(). This allows us to further simplify it in follow-ups as we no longer do minor-destruction in both functions but only in drm_unplug_minor(). Also add kernel-doc comments about what these calls do. [airlied: fixup for changes to kdev stuff] Signed-off-by:
-
Ilija Hadzic authored
Bit-copying restoration of CRTC structure in failure-recovery path of drm_crtc_helper_set_config function evokes a subtle and rare, but very dangerous, corruption of CRTC mutex structure. Namely, if drm_crtc_helper_set_config takes the path under 'fail:' label *and* some other process has attempted to grab the crtc mutex (and got blocked), restoring the CRTC structure by bit-copying it will overwrite the CRTC mutex state and the waiters list pointer within the mutex structure. Consequently the blocked process will never be scheduled. This patch fixes the issue by eliminating the bit-copy restoration. The elimination is possible because previous patches have cleaned up the resoration path so that only the fields touched by the drm_crtc_helper_set_config function are saved and restored if necessary. Signed-off-by:
Ilija Hadzic <ihadzic@research.bell-labs.com> Signed-off-by:
-
Ilija Hadzic authored
There is no need to set crtc->enabled field in drm_crtc_helper_set_config. This is already done (and properly restored in case of failure) in drm_crtc_helper_set_mode that is called by drm_crtc_helper_set_config. Doing it at only one place makes restoration in case of failure easier. Signed-off-by:
-
Ilija Hadzic authored
There is no need to save or restore hwmode field, because by the time this function sets this field, it cannot fail any more. However, we should save old enabled field because if the function fails, we want to return with unchanged CRTC. Signed-off-by:
-
Ilija Hadzic authored
Signed-off-by:
-
Ilija Hadzic authored
Old framebuffer is stored in save_set.fb and it is the same value that is later stored in old_fb. This makes old_fb redundant so we can replace it with save_set.fb. Signed-off-by:
-
Ilija Hadzic authored
Signed-off-by:
-
Chris Wilson authored
Replace the sparse array of booleans with a bitfield. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by:
-
Chris Wilson authored
When a second process opens the device and master transferrence is complete, we walk the list of open devices and remove their authentication. This also revokes our root privilege. Instead of simply dropping the authentication, this patch reverts the authenticated state back to its original value. Signed-off-by:
-
Dave Airlie authored
This causes problems with never going busy due to ptherm polling, and after talking to Ben I can't see it being required. Signed-off-by: -
Ville Syrjälä authored
drm_connector_sysfs_add() explicitly checks if connector->kdev is already populated and returns success. So it clearly now allows being called multiple times. Remove some stale comments to the contrary. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Christian König authored
Don't block forever if there is nothing to wait for. Signed-off-by:
Christian König <christian.koenig@amd.com> Tested-by:
Rafa? Mi?ecki <zajec5@gmail.com> Signed-off-by:
-
Gerd Hoffmann authored
Signed-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Gerd Hoffmann authored
qxl devices can have a 64bit surface bar, which is quite handy if you need a bit more surface memory. So try to use it if it is present. Note that this bar might be mapped above 4g. QEMU command line to check that out: qemu-system-x86_64 -m 4g \ -vga qxl -global qxl-vga.vram64_size_mb=512 \ $otheroptions Signed-off-by: -
Gerd Hoffmann authored
Explicitly set 1024x768 as default mode, so the display doesn't come up with the largest supported mode. While being at it drop first three drm_add_modes_noedid calls. As drm_add_modes_noedid fills the mode list with modes from the database *up to* the specified size it is pretty pointless to call it multiple times with different sizes. Signed-off-by:
-
Gerd Hoffmann authored
New helper function to set the preferred video mode. Can be called after drm_add_modes_noedid if you don't want the largest supported video mode be used by default. Signed-off-by:
-
Ville Syrjälä authored
drm_fb_get_bpp_depth() likes to complain about unsupported pixel formats but doesn't bother telling us what the format was. Also format_check() just returns an error when it encouters an invalid format, leaving the user scratching his head trying to figure out why addfb failed. Make life a bit easier by using drm_get_format_name() in both places. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Ville Syrjälä authored
I got very confused when I tried to compare the EST modes with the spec. Bring over a comment from xf86EdidModes.c that actually describes some of history where these things came from. Signed-off-by:
-
Ville Syrjälä authored
Also check the est3 modes whose presence is indicated by bit 0. Signed-off-by:
-
Ville Syrjälä authored
The correct refresh rate for this mode is 75, not 85. Signed-off-by:
-
Ville Syrjälä authored
Let's be a bit more consistent with our error values. Signed-off-by:
-
Ville Syrjälä authored
Let's be a bit more consistent with our error values. Signed-off-by:
-
Ville Syrjälä authored
Let's be a bit more consistent with our error values. Signed-off-by:
-
Ville Syrjälä authored
Let's be a bit more consistent with our error values. Signed-off-by:
-
Ville Syrjälä authored
Let's be a bit more consistent with our error values. Signed-off-by:
-
Ville Syrjälä authored
Return -ENOENT for framebuffers like we do for other mode objects that can't be found. Signed-off-by:
-
Ville Syrjälä authored
We tend to return -EINVAL for everything. Let's try to help poor userland developers a bit by at least returning -ENONET for missing objects. Signed-off-by:
-
Ben Hutchings authored
Most architectures define virt_to_page() as a macro that casts its argument such that an argument of type unsigned long will be accepted without complaint. However, the proper type is void *, and passing unsigned long results in a warning on MIPS. Compile-tested only. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Ben Hutchings authored
By definition, the page offset will not affect the result. Compile-tested only. Signed-off-by:
-
YoungJun Cho authored
When there are unconsumed pending events, the events are destroyed by calling destroy callback, but the events list are remained, because there is no list_del(). It is possible that the page flip request is handled after drm_events_release() is called and before drm_fb_release(). In this case a drm_pending_event is remained not freed. So exynos driver checks again to remove it in its post close routine. But the file_priv->event_list contains undeleted ones, this can make oops for accessing invalid memory. Signed-off-by:
YoungJun Cho <yj44.cho@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Lespiau, Damien authored
Signed-off-by:
-
