This patch adds a new crypto_user command that allows the admin to
delete the crypto system RNG.  Note that this can only be done if
the RNG is currently not in use.  The next time it is used a new
system RNG will be allocated.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The header file cryptouser.h only contains information that is
exported to user-space.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently we free the default RNG when its use count hits zero.
This was OK when the IV generators would latch onto the RNG at
instance creation time and keep it until the instance is torn
down.

Now that IV generators only keep the RNG reference during init
time this scheme causes the default RNG to come and go at a high
frequencey.  This is highly undesirable as we want to keep a single
RNG in use unless the admin wants it to be removed.

This patch changes the scheme so that the system RNG once allocated
is never removed unless a specifically requested.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Currently for skcipher IV generators they must provide givencrypt
as that is the whole point.  We are currently replacing skcipher
IV generators with explicit IV generators.  In order to maintain
backwards compatibility, we need to allow the IV generators to
still function as a normal skcipher when the RNG Is not present
(e.g., in the initramfs during boot).  IOW everything but givencrypt
and givdecrypt will still work but those two will fail.

Therefore this patch assigns a default givencrypt that simply
returns an error should it be NULL.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

clk_prepare_enable() may fail, so we should better check its return value
and propagate it in the case of error.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Should be CRYPTO_AKCIPHER instead of AKCIPHER
Reported-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The picoXcell hardware crypto accelerator driver was using an
older version of the clk framework, and not (un)preparing the
clock before enabling/disabling it.  This change uses the handy
clk_prepare_enable function to interact with the current clk
framework correctly.
Signed-off-by: Michael van der Westhuizen <michael@smart-africa.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The nx driver reads two crucial paramters from the firmware for
each crypto algorithm, the maximum SG list length and byte limit.
Unfortunately those two parameters may be bogus, or worse they
may be absent altogether.  When this happens the algorithms will
still register successfully but will fail when used or tested.

This patch adds checks to report any firmware entries which are
found to be bogus, and avoid registering algorithms which have
bogus parameters.  A warning is also printed when an algorithm
is not registered because of this as there may have been no firmware
entries for it at all.
Reported-by: Ondrej Moriš <omoris@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add DT bindings documentation for the new marvell-cesa driver.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the Kirkwood and Dove SoC descriptions, and control the allhwsupport
module parameter to avoid probing the CESA IP when the old CESA driver is
enabled (unless it is explicitly requested to do so).
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add the Orion SoC description, and select this implementation by default
to support non-DT probing: Orion is the only platform where non-DT boards
are declaring the CESA block.

Control the allhwsupport module parameter to avoid probing the CESA IP when
the old CESA driver is enabled (unless it is explicitly requested to do
so).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The old and new marvell CESA drivers both support Orion and Kirkwood SoCs.
Add a module parameter to choose whether these SoCs should be attached to
the new or the old driver.

The default policy is to keep attaching those IPs to the old driver if it
is enabled, until we decide the new CESA driver is stable/secure enough.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add CESA IP description for all the missing armada SoCs (XP, 375 and 38x).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for SHA256 operations.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for MD5 operations.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for Triple-DES operations.
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support for DES operations.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The CESA IP supports CPU offload through a dedicated DMA engine (TDMA)
which can control the crypto block.
When you use this mode, all the required data (operation metadata and
payload data) are transferred using DMA, and the results are retrieved
through DMA when possible (hash results are not retrieved through DMA yet),
thus reducing the involvement of the CPU and providing better performances
in most cases (for small requests, the cost of DMA preparation might
exceed the performance gain).

Note that some CESA IPs do not embed this dedicated DMA, hence the
activation of this feature on a per platform basis.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The existing mv_cesa driver supports some features of the CESA IP but is
quite limited, and reworking it to support new features (like involving the
TDMA engine to offload the CPU) is almost impossible.
This driver has been rewritten from scratch to take those new features into
account.

This commit introduce the base infrastructure allowing us to add support
for DMA optimization.
It also includes support for one hash (SHA1) and one cipher (AES)
algorithm, and enable those features on the Armada 370 SoC.

Other algorithms and platforms will be added later on.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

We are about to add a new driver to support new features like using the
TDMA engine to offload the CPU.
Orion, Dove and Kirkwood platforms are already using the mv_cesa driver,
but Orion SoCs do not embed the TDMA engine, which means we will have to
differentiate them if we want to get TDMA support on Dove and Kirkwood.
In the other hand, the migration from the old driver to the new one is not
something all people are willing to do without first auditing the new
driver.
Hence we have to support the new compatible in the mv_cesa driver so that
new platforms with updated DTs can still attach their crypto engine device
to this driver.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The mv_cesa driver currently expects the SRAM memory region to be passed
as a platform device resource.

This approach implies two drawbacks:
- the DT representation is wrong
- the only one that can access the SRAM is the crypto engine

The last point is particularly annoying in some cases: for example on
armada 370, a small region of the crypto SRAM is used to implement the
cpuidle, which means you would not be able to enable both cpuidle and the
CESA driver.

To address that problem, we explicitly define the SRAM device in the DT
and then reference the sram node from the crypto engine node.

Also note that the old way of retrieving the SRAM memory region is still
supported, or in other words, backward compatibility is preserved.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

On Dove platforms, the crypto engine requires a clock. Document this
clocks property in the mv_cesa bindings doc.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Merge the mvebu/drivers branch of the arm-soc tree which contains
just a single patch bfa1ce5f ("bus:
mvebu-mbus: add mv_mbus_dram_info_nooverlap()") that happens to be
a prerequisite of the new marvell/cesa crypto driver.

Update the "IBM Power in-Nest Crypto Acceleration" and
"IBM Power 842 compression accelerator" sections to specify the correct
files.

The "IBM Power in-Nest Crypto Acceleration" was originally the only
NX driver, and so its section listed all drivers/crypto/nx/ files,
but now there is also the 842 driver which has its own section.  This
lists explicitly what files are owned by the Crypto driver and which
files are owned by the 842 compression driver.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add support to the nx-842-pseries.c driver for running in little endian
mode.

The pSeries platform NX 842 driver currently only works as big endian.
This adds cpu_to_be*() and be*_to_cpu() in the appropriate places to
work in LE mode also.
Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The new aead_edesc_alloc left out the bit indicating the last
entry on the source SG list.  This patch fixes it.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

I incorrectly removed DESC_MAX_USED_BYTES when enlarging the size
of the shared descriptor buffers, thus making it four times larger
than what is necessary.  This patch restores the division by four
calculation.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The struct aead_instance is meant to extend struct crypto_instance
by incorporating the extra members of struct aead_alg.  However,
the current layout which is copied from shash/ahash does not specify
the struct fully.  In particular only aead_alg is present.

For shash/ahash this works because users there add extra headroom
to sizeof(struct crypto_instance) when allocating the instance.
Unfortunately for aead, this bit was lost when the new aead_instance
was added.

Rather than fixing it like shash/ahash, this patch simply expands
struct aead_instance to contain what is supposed to be there, i.e.,
adding struct crypto_instance.

In order to not break existing AEAD users, this is done through an
anonymous union.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The struct crypto_alg is embedded into various type-specific structs
such as aead_alg.  This is then used as part of instances such as
struct aead_instance.  It is also embedded into the generic struct
crypto_instance.  In order to ensure that struct aead_instance can
be converted to struct crypto_instance when necessary, we need to
ensure that crypto_alg is aligned properly.

This patch adds an alignment attribute to struct crypto_alg to
ensure this.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch fixes a number of problems in crypto driver Kconfig
entries:

1. Select BLKCIPHER instead of BLKCIPHER2.  The latter is internal
and should not be used outside of the crypto API itself.
2. Do not select ALGAPI unless you use a legacy type like
CRYPTO_ALG_TYPE_CIPHER.
3. Select the algorithm type that you are implementing, e.g., AEAD.
4. Do not select generic C code such as CBC/ECB unless you use them
as a fallback.
5. Remove default n since that is the default default.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The AEAD speed test SG list setup did not correctly mark the AD,
potentially causing a crash.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds a speed test for rfc4309(ccm(aes)) as mode 212.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The patch

	crypto: caam - Add definition of rd/wr_reg64 for little endian platform

added support for little endian platforms to the CAAM driver. Namely a
write and read function for 64 bit registers.
The only user of this functions is the Job Ring driver (drivers/crypto/caam/jr.c).
It uses the functions to set the DMA addresses for the input/output rings.
However, at least in the default configuration, the least significant 32 bits are
always in the base+0x0004 address; independent of the endianness of the bytes itself.
That means the addresses do not change with the system endianness.

DMA addresses are only 32 bits wide on non-64-bit systems, writing the upper 32 bits
of this value to the register for the least significant bits results in the DMA address
being set to 0.

Fix this by always writing the registers in the same way.
Suggested-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

New test vectors for RSA algorithm.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add a new rsa generic SW implementation.
This implements only cryptographic primitives.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>

Added select on ASN1.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Add Public Key Encryption API.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>

Made CRYPTO_AKCIPHER invisible like other type config options.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

The Poly1305 authenticator requires a unique key for each generated tag. This
implies that we can't set the key per tfm, as multiple users set individual
keys. Instead we pass a desc specific key as the first two blocks of the
message to authenticate in update().
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adds rfc4106 test vectors sourced from
draft-mcgrew-gcm-test-01.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This reverts commit 9b9f9296a7b73fbafe0a0a6f2494eaadd97f9f73 as
all in-kernel implementations of GCM have been converted to the
new AEAD interface, meaning that they should now pass the updated
rfc4543 test.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch converts the caam GCM implementations to the new AEAD
interface.  This is compile-tested only.

Note that all IV generation for GCM algorithms have been removed.
The reason is that the current generation uses purely random IVs
which is not appropriate for counter-based algorithms where we
first and foremost require uniqueness.

Of course there is no reason why you couldn't implement seqiv or
seqniv within caam since all they do is xor the sequence number
with a salt, but since I can't test this on actual hardware I'll
leave it alone for now.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>